I have Advantage for about 3 months now. While using the device working fine.. All of the sudden it's not regconizing my 6gb microsd card. I try everything...put it back in, reset..., but haven't try hard reset (don't want to loose my data). But it's not working.
I try to put the microsd to my computer and it's working file, so nothing wrong with the card.. Just don't know about the minisd adapter.. what? All of the sudden the minisd adapter is not working.. ?
Have anybody have this problem. ? Please help...?
have try to hard reset already, but its still not recognize the microsd card...
Anyone help...?
I went a bought another Mini Adapter, and it's working fine now.
But loading mcirosd little slower.. is there a different in speed with Minisd adapter?
I have the same problem here... micro sd is not recognized
I would buy a new adaptor... but can't find a shop that sells it seperately.
It seems like the adaptors are always sold together with a micro SD card.
Bart
Related
Hi there,
you may think : "not another one with MiniSD card problems !", but I bought my HTC P3600 yesterday with a Kingston 2Gb MiniSD card and it just won't see the card. I have the original, latest WM5 version and didn't try to reformat the card (because I don't have a card reader here) yet, so could that be the problem or is it hardware-related ?
Regards
you can see more info in the memory setting
for sd cards
otherwise it could be a hardware issue had it happen before
with various flash cards
and of cause it could be the phone's sd connector if no minisd cards work :S
It doesn't show anything there, it says "not installed"......couldn't it be the card that only has to be formatted ? Or do you think it is hardware-related ?
just yr luck tt yr kingston 2gb is not recognised by your trinity.
happened to my friend as well.
solved when she got a sandisk instead.
You need tio try one of 2 things
1) Try your card in another device
2) Try another card in your device
If either work OK, it points to the culprit and the solution
my best bet is that the card is dead
happent to a 512MB kindston i had too
1 day it just stop'd working
kinda odd too when they say that sd cards are very resilient
saw a clip where they placed a digicam on a bridge and blew it up
and the sd card still worked
and a cam fell into the sea and washed up and the sd card was still working so they could get the pictures out
but i have many kingston sd cards which work just fine
Well, formatting the card had the desired effect !
It is now found by the P3600 and I was able to install the TomTom maps
I'm glad it worked !!
Hello guys, i've just bought a vodafone v1605 Hermes, after having a bit of fun with it i've bought a microSDHD 4GB cause i wished to install TomTom...
I've inserted it, and after going on settings/memory or file explorer, i couldn't see the extended memory =(
I've tried shutting down the device and turning it back on... but nothing to do... (i've also tried to remove and insert it several times)
After that i've tested it with the adaptor on my PC and it works! =/
Strange thing...
Than i remembered that somewhere someone was talking about the fact that it's needed WM6 to see microSDHD on the device, so i've installed blacksatin, last radio version and last spl but nothing to do... my device can't see the SD card... =(
Now i'm guessing if it may be possible that my device microSD reader is broken... but i really hope not!
Has someone else had this issue?
Is there something i forgot to do? some setting, or something to flash on the device?
Just to assure that it isn't a microSD reader problem, today i'm going to buy a microSD 256mb, let's hope it will see the extended memory card..
All suggestions are appreciated... Thanks!
I had a similar problem after first buying a micro sd. The cause is from pushing it too far in. The hermes micro sd slot is deeper than the sd card is supposed to be put in (by about 1mm). If you insert it until around half a mm is still pertruding it should be ok.
Thanks for the suggestion OdeeanRDeathshead i've tried also this solution... but nothing to do... =(
Just for curiosity, when i insert the microSD and i'm in memory page, should i see it immediatly if the device recognize it? or i've to reboot or "reload" the page?
Ty!
Ok, yesterday afternoon i went to buy a new microSD 1Gb (great offer, i've paid it 13 euros for a promotion) and it works without any problem... so now i really can't understand why the device can't read the 4Gb...
It is an orginal SanDisk MicroSDHC 4Gb... =/
My only doubt is that the device can't recognize this high capacity SD... =(
Am sure I read elsewhere that you need to format the card in a PC card reader (SDHC capable) and then put it in the phone and format again - or something like that.
crazyC said:
Am sure I read elsewhere that you need to format the card in a PC card reader (SDHC capable) and then put it in the phone and format again - or something like that.
Click to expand...
Click to collapse
at this point i think that this is the missing passage...
i'll try this soon and report...
thanks crazyC!
MicroSDHC cards are not compatible with some WM5 ROMS. What ROM are you using?
I recently purchased a Sandisk 4Gb microsd card for use with the Tytn II. The card works correctly on the Tytn. I wanted to transfer a large file to the card by means of the card reader sddr-113 that came with the card. I plugged the microsd card into the sd adapter, put the latter into the card reader, and plugged the card reader into the usb port of the PC.
On trying to write the file to the card an error message popped up saying the card was read-only. I double-checked that the read-only tab on the sd adapter was in the correct position to enable writing but the error persisted. I formatted the card on the Tytn but to no avail. Sandisk support does not list any known issues.
Knowing that several users have purchased a similar card for the Tytn II, has anyone encountered such problems, and is there any fix/workaround? Thanks.
EDIT: Note that there is no problem reading files from the card on the PC. Transfer speed in this case seems quite good. MY PC is WinXP.
You might check the microSD adapter. The adapters that are a std sized SD card have the small "read only" switch on the side of the card, you may have bumped it. Mine isn't even labeled, it should be switched forward, towards the gold contacts.
Good luck.
RemE said:
You might check the microSD adapter. The adapters that are a std sized SD card have the small "read only" switch on the side of the card, you may have bumped it. Mine isn't even labeled, it should be switched forward, towards the gold contacts.
Good luck.
Click to expand...
Click to collapse
As I said, I checked that the read-only switch was in the right position. That said the adapter may be defective, and I'll try to put the microSd into another adapter. However any news from others with possible the same problem will serve to see if mine is an isolated case or not.
Oops, sorry, yup I'd try a different adapter, they're pretty cheap/fragile. I have only seen this once, on a friends card. The tip is that the native microSd card is writeable in another device so it really points to the adapter.
I am also experiencing this issue with the exact same card & adapter.
GRRR it really take age to copy data across active sync...
Sandisk 2 & 4 GB card
fun_key said:
I am also experiencing this issue with the exact same card & adapter.
GRRR it really take age to copy data across active sync...
Click to expand...
Click to collapse
I had this problem as well. I later found that my PC wanted me to format the card when reading it with the adapter. Luckily my card didn't have anything important on it at the time. When I pulled the card to use it in my Tilt, the new device couldn't read it either.
I was able to use the card & adapter with a program found in a post on this forum to repair my corrupted card.
I Need some help guys, I got some problem as my trinity (WM 6) can not recognize my Mini SD 2gb anymore. I've inserted into trinity mini sd slot, but trinity did not recognized my mini sd. FYI, I've been using this Mini SD on trinity for almost 7 months, and it works great until yesterday.
Unfortunately, now i can not use my mini SD as trinity did not recognized as a storage or external memory. I've been tested if my mini SD was broken. I've inserted the same mini SD into my laptop's memory reader, surprisingly this mini SD was recognized by laptop and was normal
So the problem is on my trinity, what happened here guys as this problem was suddenly happened on trinity ? and what is the best solution for this problem
Thanks,
Tony
been a lot of talk about this over the forum do a search for more info.
but Iv had it happen to me over the last few days, on a 2gig card that came with the phone and a 8gig hc card.
I just kept taking it in and out and each time its come back on.
thats not to say it will work for you as it could be some other reason your card is not working.
I think that some times the card just does not sit right or the phone needs a reset to see the card again do a soft reset may help if its just the phone loosing sight of the card.
hope you get it sorted.
While uploading pictures onto the miniSD card that came with my Touch a few days ago, the window froze and my Touch hasn't been able to recognize the card at all since then. I'm pretty sure it's not a software issue as I've tried a hard reset with no luck, and I'm hesitant on buying a new miniSD card cuz I'm not really sure if it's a hardware issue.
Has anyone experienced something like this at all?
Any help would be appreciated, thanks.
will the card work in a card reader?
have you tried re-formatting the card?
im having the same problem =/
ok
my phone isnt reading any sd card
my sd card adapter isnt working properly either i've tested it on a video camera that supports sd cards
so is it best to jus get a replacement phone?