Related
I don't know.. ever since I got my brand new O2 Exec I've been getting less and less productive in work. The machine is indeed cool, but only when it works. I'm early adapter but it's been for the past month or so that I'm working for the machine instead of the machine working for me.
Memory leaks are out of this world. Memory is not freed up many times and I end up easily with 3mb of free ram even if no program is on. The battery life is terrible (to say the least) compared to my good old PDA2K (even with it's over 1yrs old battery! it blasts the Exec memory miles away)
Lately, the amount of lockups I am getting is simply unbearable. machine freezes.. sometimes the left soft button's caption (i.e "phone") graphics is seen like a small white box or something(as if all the letter go over each other) and then machine freezes. Something an alert comes up and then machine freezes. I can't trust the machine for business use, for games yes, but not for business.
Please note I don't have many programs running at all, no wisbar or cosmetic stuff like that., no SPB Plus and stuff like that. Just PocketInformant, PocketBreeze, phoneAlarm all of which are must have for me as well as some utils i relay on. I am wondering maybe my ROM is outdated, but I didn't see an update from O2 yet (I don't want to install NO_ID tool and flush other roms than OS own due to warrenty issues)
I have OS2 Exec with following ver:
ROM version: 1.13.82 WWE
ROM date: 11/30/05
Radio version: 1.04.02
Protocol version: 42.37.P8
ExtROM version: 1.13.188 WWE
Is there any Official update from O2 to any of these ?
Help is very much appreciated. That's before a 10kg hammer is blaster over the machine in an act of anger.. lol
MOBILER
Here are my suggestions:
1st Upgrade to the latest I-Mate Jasjar ROM. It is definitely faster than the shipped ROM from O2 and highly stable.
ROM version: 1.30.76 WWE
ROM date: 02/20/06
Radio version: 1.09.00
Protocol version: 42.42.P8
ExtROM version: Delete and install only what you need.
2nd I use Oxios Memory which has 2 useful applications in it. Oxios Close apps and Oxios Hibernate. I learned about this here in one of the forums. It basically free up a substantial amount of unused memory. Here is a link: http://www.oxios.com/memory/
As far as battery is concerned. I don't have a problem with mine. I keep it plugged in every night to charge playing a lecture DVD while I sleep.
So far O2 has not released an update yet. The last official ROM they released, I believe you are already using it. Let us hope when they do release something it would have the complete Windows Mobile Update support for BT headsets and Push email.
cktlcmd said:
Here are my suggestions:
1st Upgrade to the latest I-Mate Jasjar ROM. It is definitely faster than the shipped ROM from O2 and highly stable.
ROM version: 1.30.76 WWE
ROM date: 02/20/06
Radio version: 1.09.00
Protocol version: 42.42.P8
ExtROM version: Delete and install only what you need.
2nd I use Oxios Memory which has 2 useful applications in it. Oxios Close apps and Oxios Hibernate. I learned about this here in one of the forums. It basically free up a substantial amount of unused memory. Here is a link: http://www.oxios.com/memory/
As far as battery is concerned. I don't have a problem with mine. I keep it plugged in every night to charge playing a lecture DVD while I sleep.
So far O2 has not released an update yet. The last official ROM they released, I believe you are already using it. Let us hope when they do release something it would have the complete Windows Mobile Update support for BT headsets and Push email.
Click to expand...
Click to collapse
Thanks man, I highly appreciate your detailed helpful response, but two issues :
1) As I said, I do not want to install the i-mate JJ ROM over the O2 one due to warrenty issues. So I think I would prefer to wait for the official O2 release thought I am starting to loose patience..
2) I also use the MagicButton app on my Exec. It seems very efficient at closing programs and switching tasks with minimal memory footprint. I'll look into the program you mentioned, but I doubt that's the problem. My machine has memory leaks because even when programs are all closed after several hours of use I can get down to 3mb free RAM.
Regards
MOBILER
Do you use the brilliant SBSH Ilauncher as this has very bad memory leaks being looked into at the moment
@mobiler,
we must have twins! I have mentioned similar problems with my Exec to those you discovered and when I reported them here people were unhappy and accused me of not knowing how to use a Exec properly!
You may want to look at the following:
1. Powersave does reduce battery drain but you may a slight delay to being alterted to incoming calls
2. Reformat your SD card if you use data files (eg music, ebooks etc) a lot. I found that MS Reader and Windows Media player were not happy with the use of Powersave - often I would get a systems crash after restarting the device. But after a reformat of the SD card the device was much more stable
3. You can get good quality spare batteries now for the Universal from www.mobilefun.co.uk
I had a few issues with PhoneAlarm, nice piece of software does exactly what I wanted as well, apart from I had some compatability issues.
Slowed the phone down alot and if my memory serves me correctly ( I have a few too many memory leaks of my own going on ) made the phone freeze a couple of times.
Tried the trial version of Pocket Informant ( had it as standard on an IPAQ HX4700 and quite liked it ) but that caused me a few problems.
I now keep things simple, using PocketZenPhone for switching profiles ( very nice and simple solution ). Use the O2 web site to keep track of number of txts sent and phone call allowance.
SPBGPRS monitor for the obvious monitoring of GPRS usage.
Using the standard contacts and calender ( does me ok but not as flexible )
And I have just started messing about with Wisbar, No problems as off yet.
Personally I have found all problems with the phone are linked to software incompatabilities.
I am still in warrenty with O2 but have updated to the latest ROM and radio and if for any reason it has to go back I will try and flash back but my way of thinking is that I should be allowed to change to any ROM image I want in the same way as load any software I want.
Dont know if that is of any help at all, just my views on trying the same software. Regardless of how good they are, they caused problems for me so now I dont use them and everything seems to be running ok.
I know this is anachistic but I am also annoyed by the occasional reboot and have discovered (shock horror) that having as few TSRs running (i.e. none) as possible much reduces this. I used to run magic button and I am convinced that this caused the occasional lockup. These days I only have vbar (2.2) installed and run it at times of need (i.e. I don't run it all the time) as well as using the memory item in the settings to kill programs.
Running the virgin corporate install o2 ROM with no TSRs. Using PIE and Netfront, and the built in outlook, together with a number of games, has meant that my xda is quite reliable. I am hoping that my 'once every 2-3 days reboot' will be gone once the new xda rom comes out :shock:
I can also recommend memmaid to occasionally clear our broken registry settings.
WM5 has been a painfull experience for the PDA manufacturers. If you think we are having a bad time you should read the stuff about the dell axim x50 upgrade on aximsite. I am hoping that WM5.1 will be a free install for universal users as this will make the os more robust.
On an optimistic note the chipset employed by the universal is well used and very reliable in many applications, the construction is robust, so IMHO it all comes down to software/firmware which we hope will improve.
I suppose that is what I was getting at.
Keep it simple.
Whether it is a stability problem with WM5 or just the third party software solutions I dont know.
But when I keep it simple, it works and works well.
I never mentioned battery life earlier, this weekend I went away with a full charge, granted I took another smaller phone with me but I did use it quite heavily ( playing Bejewelled, surfing the net and sending MMS ) and it was always on .
This morning it was on about 40% charged. Not too bad I thought compared to previous Windows Mobile phones I have had.
I use memmaid as well to do a bit of house keeping.
I was using spbPocketPlus mainly for its Task Handling, but thought I would give WisBar a shot. Having a proper close option to hand is very handy and should be included as a standard option in any version of Windows Mobile.
If I am not using a program I want it to be shut down properly. Like using a PC I only have the programs running that I am using.
FWIW, I am new to this device, but not to PPC, so I am familiar with minimize/close distinction. My orange SPV M5000 loses about .3MB per program invocation. I shut down programs using either the program's own Exit function (where it exists) or the Memory tab in the settings area. But the memory is slowly eroded. The worst culprit is Activesync to my laptop, that consumes around 5MB that never comes back. After a soft reset there is about 23MB free, this quickly drops to around 18, then steadily drops. Something in the OS is not releasing memory. I have to soft reset to get the memory back (which takes about 3 minutes).
I suppose that is what I was getting at.
Keep it simple.
Whether it is a stability problem with WM5 or just the third party software solutions I dont know.
But when I keep it simple, it works and works well.
I never mentioned battery life earlier, this weekend I went away with a full charge, granted I took another smaller phone with me but I did use it quite heavily ( playing Bejewelled, surfing the net and sending MMS ) and it was always on .
This morning it was on about 40% charged. Not too bad I thought compared to previous Windows Mobile phones I have had.
I use memmaid as well to do a bit of house keeping.
I was using spbPocketPlus mainly for its Task Handling, but thought I would give WisBar a shot. Having a proper close option to hand is very handy and should be included as a standard option in any version of Windows Mobile.
If I am not using a program I want it to be shut down properly. Like using a PC I only have the programs running that I am using.
Have you tried using the Exec in Corporate mode? It works fine for me
@ChristopherTD, I setup a dummy Activesync server and then set Activesync to manual and I have found this make my Exec more stable - perhaps it is because it does not lose as much RAM as before.
It is surprising that after 6/9 months of WM5 availability that we are still having instability problems with major/popular WM5 apps. I only use GSPMagic, Agenda Fusion, MS Reader and Opera. Only GSPMagic and AgendaFusion have been trouble-free.
WM5 was intended for programs to keep running. I know we like to hack our machines to death + sometimes the memory gets too full and you have to kill stuff. But sometimes if you keep MS stuff running, and don't kill it all the time with something like magic button, you find the system runs better.
I have activesync, contacts, outlook and PIE open all the time. I used to kill activesync all the time and I think this caused problems.
Normally my games have proper exit buttons, together with pRSSReader (totally excellent program). For the MS built in programs I tend to leave them running as the OS was designed for this.
Wow I think its pretty clear I ended up with a good unit afterall, either that or o2 really really messed up with your ROMS.
I have to charge my battery every night but thats to be expected with the usage I have. And im running Wisbar Lite, PhoneAlarm, PocketBreeze, and Wisbar Advance Desktop, all no worries, the only time I notice a distinct loss of memory is after player Warring Nations.
I feel for you guys, I think your summing it up that your working on your device as opposed to it working for you says it all.
Thanks for all the responses. You're all great guys!
Please see my responses below to all suggestions:
Darren_Bridgeland said:
Do you use the brilliant SBSH Ilauncher as this has very bad memory leaks being looked into at the moment
Click to expand...
Click to collapse
Thanks, but no. I don't use SBSH Ilauncher. I use MagicButton which has a minimum memory footprint
jah said:
@mobiler,
we must have twins! I have mentioned similar problems with my Exec to those you discovered and when I reported them here people were unhappy and accused me of not knowing how to use a Exec properly!
You may want to look at the following:
1. Powersave does reduce battery drain but you may a slight delay to being alterted to incoming calls
2. Reformat your SD card if you use data files (eg music, ebooks etc) a lot. I found that MS Reader and Windows Media player were not happy with the use of Powersave - often I would get a systems crash after restarting the device. But after a reformat of the SD card the device was much more stable
3. You can get good quality spare batteries now for the Universal from www.mobilefun.co.uk
Click to expand...
Click to collapse
Thanks, I felt I was the only one having problems Anyway:
1) I am always in powersave, still loosing battery power.
2) I just purchased a new SD card yesterday because I thought that may have caused the problems, but it's not it.. same problems.
3) I'll look into spare batteries, thanks for the link
ninja12innotts said:
I had a few issues with PhoneAlarm, nice piece of software does exactly what I wanted as well, apart from I had some compatability issues.
Slowed the phone down alot and if my memory serves me correctly ( I have a few too many memory leaks of my own going on ) made the phone freeze a couple of times.
Tried the trial version of Pocket Informant ( had it as standard on an IPAQ HX4700 and quite liked it ) but that caused me a few problems.
Click to expand...
Click to collapse
I appreciate the reply.
1) I've purchased and used phoneAlarm for about a year straight with my PDA2K and it never failed me any problems. I consider it a must have, and since it ran quite smoothly on my PDA2k I don't see why it should cause the Exec these issues. Further, I did remove it and still exeprienced the same issues, so that's not the problem either.
2) I've used PocketInfromant for 1.5 years now and no problem on my old PDA2K.
colonel said:
I know this is anachistic but I am also annoyed by the occasional reboot and have discovered (shock horror) that having as few TSRs running (i.e. none) as possible much reduces this. I used to run magic button and I am convinced that this caused the occasional lockup. These days I only have vbar (2.2) installed and run it at times of need (i.e. I don't run it all the time) as well as using the memory item in the settings to kill programs.
Click to expand...
Click to collapse
Thanks for the reply, I've been using MagicButton for almost as long as I can remember and it never failed me. It worked superb on my PDA2K. Further, I tried removing it for a few days to check how things would work without it. Same lockups, same memory leaks, same mediocre performance, unfortunately (or fortunately) this isn't the problem either.
weasel said:
Have you tried using the Exec in Corporate mode? It works fine for me
Click to expand...
Click to collapse
Sure I actually never ran my Exec in any other mode than the Corporate mode, so I never even experienced the other modes.
jah said:
@ChristopherTD, I setup a dummy Activesync server and then set Activesync to manual and I have found this make my Exec more stable - perhaps it is because it does not lose as much RAM as before.
Click to expand...
Click to collapse
Pitty, that's not the issue with my machine as I already did that trick 2 weeks ago.
I just ran memaid to see what running processes do I have and I see to be having the following ones. Note that I have no running programs in the background and no today plugins enabled whasoever, just VoiceCommand I guess is working in the background but that's it. It seems to me that the WM5 core doesn't freeup memory.
Here's what memaid reports
gwes.exe 5.26MB
device.exe 2.83MB
filesys.exe 2.41MB
cprog.exe 2.29MB
VoiceCmd.exe 1.81MB
shell32.exe 1.51MB
(smaller processes below
tmail.exe 275.57KB
services.exe 159.81KB
connmgr.exe 115.81KB
MemMaid.exe 27.90KB
psShutXP.exe 11.90KB
srvtrust.exe 7.90KB
Nk.exe 0 bytes
the most memory you can clear is about 26-29mbytes. The rest of the running processes need to be there. There is a good thread somewhere on what each process does, will post it if I come across it again.
29mb is disappointing considering there is 64mbyte memory, but thats the way WM5 works.
rgds
I've got a O2 XDA ii (himalaya) and im running wm2005 2.01.64
After a soft reset I have 31.x MB or RAM left, even if I dont run a single program or make a single phone call within say 6hours my RAM is at 21-24MB. This has nothing to do with not correctly closing programs but either a wm2005 leak or in my case a lot of the problem is being pointed at SBSH Ilauncher.
Well here is a comparison just done a soft reset started memaid and my results are in brackets after yours for the ones in common running :-
gwes.exe 5.26MB ( 4.6 MB )
device.exe 2.83MB ( 1.46 MB )
filesys.exe 2.41MB (1.82 MB )
cprog.exe 2.29MB ( 1.46 MB )
VoiceCmd.exe 1.81MB
shell32.exe 1.51MB ( 1.21 MB )
(smaller processes below
tmail.exe 275.57KB
services.exe 159.81KB ( 315.76 kb )
connmgr.exe 115.81KB ( 115.81 kb )
MemMaid.exe 27.90KB (23.0 kb )
psShutXP.exe 11.90KB
srvtrust.exe 7.90KB (7.9 kb )
Nk.exe 0 bytes ( 0kb )
also I have :-
Wisbaradv2.exe 787.71 kb
sddaemon.exe 67.9 kb
Pimhelper.exe 11.9 kb
Poutlook,exe 3.9 kb
( i have Wisbar, SPBdiary and pocketzenphone open )
going to have a look later tonight to see if anything changes.
ROM Ver. 1.30.76
Radio 1.09.00
ExtRom ver 1.30.164
I had similar problems when I first bought my O2 exec (on Ebay).
I downloaded the latest update from O2 website and re-flash the phone. I used Corporate install. So far it has been solid and I am even using the phone with Goodlink without a problem.
About the same time I bought the phone, I bought a 2G SD card (sandisk) , when I got the card I insalled a few software on this card (TCMP and Total Commander). Everytime I ran those applications, I can see that the phone crawls like a snail and worse it hangs. It even take a long time for me to transfer files from my laptop to the SD card even when I used a SD Card reader.
I replaced the SD card with a 2G MMC+ (Kingston) and I install the same apps. My phone is working as it should be, I can say that I didnt experience any hanging at all and it was never slow as well. I can even upload a ripped DVD movie on the phone faster compared to when I used the SD card. Right now I have one full season of Alias in my MMC+ card.
I have the phone setup to turnoff after a period of time (3 minutes) when there is no activity as opposed to others that they wanted to have the settings uncheck Start>Settings>Power. I also make sure that the backlight is set to a minimun when on battery and I uncheck the part where the phone will not recieve all incoming beam.
So far, my phone has been stable and battery lasts for 3 days.
From personal experience I found wisbar caused issues with the phone not ringing on an incoming call. It would ring for the first call after a soft reset and then stop for any further calls...
The other major issue which could cause delays and slowness is installing to the sd card any apps which ought to be installed to ram. ie: today plugins etc.
I noticed in every rom I used that after a while (like half a day) the free memory of the PDA gets drained. For example after a soft reset and with all my software loaded for good, I have 24 MB free but after 6 hours I ll have 17 MB free.
I use the FREEupRAM from sktools and it frees some ram but not all.
firiel said:
I noticed in every rom I used that after a while (like half a day) the free memory of the PDA gets drained. For example after a soft reset and with all my software loaded for good, I have 24 MB free but after 6 hours I ll have 17 MB free.
I use the FREEupRAM from sktools and it frees some ram but not all.
Click to expand...
Click to collapse
Which ROMs and which Radio ROMs specifically. I had had problems with many ROMs - but am running MARY 1.2 and have no memory drain issues.
ROMS : mun's LVSW, AXEL, MARY, INDIGO ... many many more, all with the same issue. I think its a windows mobile issue or something that occurs on every rom.
RADIO : 1.38 - 1.46 - 1.50
Well with the lVSW rom, which does not have HTC Home, I did not have any memory drain.
However with the AX3L, Mary, Mun Indigo Full, using the HTC Home Plug, I had serious memory drains as described above from our friend firiel.
When I disabled the HTC Home pluging and operated them on the standard Today Screens with only SPB Weather programm running, the memory leak was minimal i.e from 24 to 21 in a period of three days.
I believe the problem is not on the ROMS but on the HTC Home plug, and maybe we need to know if it is the case with people who have the original Touch device and the Kaiser, if they also experience these kind of memory leaks.
Generally these user friendly animated programms drain down the memory, I had the same problem with the spb mobile suite application.
Maybe it will be fixed in the future
I do use the spb mobile suite, I ll try uninstalling it workaround and report back
A friend having a trinity with wm5 running exactly the same programs installed as I does not have the same issues even with SPB Mobile suite, so the problem is in only on wm6
I have a DoPOD d810=Trinity running WM5 and have the same problem, SKTools also doesn't revive the Memory to the full SR status of >25MB.
Does anyone know of a small utility that can revive the Maximum Memory without having to do a SR??
Hello,
Being used HD for one week, I found one problem about memory consumption (not a problem actually ).
At startup, about 120M free memory, after using for one day (Opera, view picture, games, stock manager, etc), only about 80M RAM left.
I have tried to use
- oxios memory
- MemMaid 2.0
but it can only free 1-2M RAM, where is my RAM
Yes, I found out the same problem! Try to do a reset and the memory is cleaned again. I use the X button to kill all programs after using them, but it seems to be fludding on a regular basis, also activesync program keep popping up when I'm not connected, and the memory usage slowely gets higher every hour with a few procent.
Does anyone else has the same prob? Didn't use special appz yet, because it doesn't seem to disturb working with device.
greetz,
swa
Swantony001 said:
Yes, I found out the same problem! Try to do a reset and the memory is cleaned again. I use the X button to kill all programs after using them, but it seems to be fludding on a regular basis, also activesync program keep popping up when I'm not connected, and the memory usage slowely gets higher every hour with a few procent.
Click to expand...
Click to collapse
Until the phone starts having problems, why worry? With every new device there are threads like this with people obsessing over the amount of free RAM their devices show, but honestly you can just leave Windows Mobile to deal with the RAM itself and you'll never have a problem. There's no need to try and recover all the RAM that you think should be free. The OS will take care of it.
I have the same problem. My guess is it a memory leak in some apps. ITs no big deal, because there is lots of free memory and if it really bugs me, I can do a soft reset every now and then.
Yes, it is not a problem to me until now as there are plenty of RAM available!
I just curious about the kinds of program that consume the memory??
From my observation, WM OS is not doing the job of memory management well.
SiliconS said:
Until the phone starts having problems, why worry? With every new device there are threads like this with people obsessing over the amount of free RAM their devices show, but honestly you can just leave Windows Mobile to deal with the RAM itself and you'll never have a problem. There's no need to try and recover all the RAM that you think should be free. The OS will take care of it.
Click to expand...
Click to collapse
Clearing your browser cache will retrieve some of it
(unless you have it to cache to the storage card)
I don't bother too much with this as it does not seem to become a problem.
But, I don't "load and leave" applications. I also generally do a soft reset once a week.
However, in SK Tools there is a "FreeUP RAM" application as part of the suite. I just ran it and it recovered 2 mbytes (a bit less than 1 %)
@ Swantony001 :
Hi, there is a thead about stopping Active-Sync activating itself all the time.
Works perfectly for me.
See here :
http://forum.xda-developers.com/showthread.php?t=463013&highlight=active
Greetings,
go42
the memory leak does cause problems for me, well with tomtom7 it does. sometimes i get the message "not enough memory" unpon booting TT and am forced to do a soft reset.
its not often, but the fact it happens piddles me off!
Hi, guys!
I've noticed the same thing! Something consumes active memory!!!
I watched some processes... So "cprog.exe" and "device.exe" eat memory from time to time.
I use Soft Reset once a day or in two days.
If anyone gets a new WWE ROM with that bug being fixed, please, let me know .
Memory consumption is not a big problem now, but it's a bit annoying...
jonajuna said:
the memory leak does cause problems for me, well with tomtom7 it does. sometimes i get the message "not enough memory" unpon booting TT and am forced to do a soft reset.
its not often, but the fact it happens piddles me off!
Click to expand...
Click to collapse
Damn never experienced this problem before *touches wood*
Yeah i have experience the memory leaking up starting from 38% to 44% in a matter of hours.
No biggie, but if it comes down to problems like jonajuna experienced then, yes that is a problem.
I have the following issue with Igo8:
When I want to start Igo8 it says: "failed to reserve virtual address"! After soft-reset Igo8 starts normal.
Can someone know something about this issue?
Same problem here. RAM Cleaner doesn't solve the issue either. For me, it seems that the problem only occurs if I already started iGO8 earlier; it doesn't occur if I've got the phone running for multiple days without starting iGO8.
Yes the same with my TP2 and IGO8....
This problem has been bugging me too. RAM cleaner fixed it for me once on a level 3, but never did since. I'm thinking memory leak?
I have the same problem too, what I did was usually I disable the T3D before I run the iGO8 (8.3.2.x), this usually help without have to reset my TP2. That is why iGO support said they did not cerified it work on TP2 (even most people said it work great on TP2). Used at your own risk.
I have experienced this issue few times, ussually when I turned it on for the third or forth time (or later on) in a given time, soft reset fixed it.
I am experiencing the same strange behaviour.
I have to shut down and then it restarts correctly.
Obviously it's not a certified device
Thanks for your replies. It's really annoying to soft-reset the device everytime, when I need IGO8. I hope to find a solution for this annoying problem...
Update to the latest version Jun 8 2009, 8.3.2.93112.
I think they solved the problem.
bogypop said:
Update to the latest version Jun 8 2009, 8.3.2.93112.
I think they solved the problem.
Click to expand...
Click to collapse
I still have the problem with that version. What made you think that version fixes it? Any reference?
bogypop said:
Update to the latest version Jun 8 2009, 8.3.2.93112.
I think they solved the problem.
Click to expand...
Click to collapse
Where can I find this official update? I have regularly bought mine and it has a lower reference number...
I allready have the latest version of IGO8 (Jun 8 2009, 8.3.2.93112). But thx for your advice though...
Hi Guys,
I was having the very same issue with my TP2 but it seems I managed to trick it by using the following sequence of events.
1. Disable TF3D
2. Soft-Reset the device
3. Once the device was operational again I started iGO8
4. Exit iGO8 then re-enable TF3D
5. Start iGO8 again and check if it works (it did for me)
6. Soft-Reset the device again and let it load all it's stuff including TF3D.
7. Start again iGO8 to check if it would still work (it did for me).
Well... it works for me since then, but on another note I don't have too many softwares installed on my device at this time so I'm not sure whether or not iGO is having memory leak problems. I'm pretty sure that the issue is coming from an incompatibility between TF3D and the iGO interface and also the same was confirmed by other people on the various forums.
Right now I'm using the latest available iGO8 v8.3.2.93112 (not instaled just running it straight from the storage card).
I hope the above would help you out, but in any case should anybody find a better stable solution, please let us know about it.
Cheers,
Hello this is a memory problem...i have notice if the ram is under 70 MB this error will come.....
Hi All
Yes, this is solely a memory (RAM) problem.
What is the problem you may ask, well, the phone takes a truckload of RAM to simply ...run.
Consider this.
Specified RAM - 288mb.
Available 'total' RAM - 288mb, minus 100mb = 188mb.
RAM in use (OS + TFlo) - 288mb, minus 100mb, minus up to 130mb = 60mb.
Available RAM to actually use is often 60mb or less with no running apps!!!!
This is a serious issue with this phone, it is not fair and even misleading for the consumer - i mean really, not enough memory to run just ONE app!!!
(Granted, a GPS app is large, but the device does have the chip, doesn't it?)
C'Mon.... I bought a phone with 288mb of RAM, not 60mb - [email protected]%#[email protected]!!!!!!!
Don't get me started on the specified ROM size of 512mb, of which we get to actually use just 277mb....
Cheers to all
Jabberoo
jabberoo said:
Hi All
Yes, this is solely a memory (RAM) problem.
What is the problem you may ask, well, the phone takes a truckload of RAM to simply ...run.
Consider this.
Specified RAM - 288mb.
Available 'total' RAM - 288mb, minus 100mb = 188mb.
RAM in use (OS + TFlo) - 288mb, minus 100mb, minus up to 130mb = 60mb.
Available RAM to actually use is often 60mb or less with no running apps!!!!
This is a serious issue with this phone, it is not fair and even misleading for the consumer - i mean really, not enough memory to run just ONE app!!!
(Granted, a GPS app is large, but the device does have the chip, doesn't it?)
C'Mon.... I bought a phone with 288mb of RAM, not 60mb - [email protected]%#[email protected]!!!!!!!
Don't get me started on the specified ROM size of 512mb, of which we get to actually use just 277mb....
Cheers to all
Jabberoo
Click to expand...
Click to collapse
I think that this is not the problem. My kaiser will run Igo8 With high resolution, buildings, TTS enabled, etc with just 25mb free memory. why can my kaiser do it with 25 mb and the TP2 not with 60mb free memory?
Verry strange...
The second thing that I dont understand is that the problem will come directly after starting IGO8. My kaiser will run slow or crash when it has too less memory remaining. but by the TP2 it will give an error directly after starting and BEFORE loading the app... This will give me the idea that it is a verry simple and basic problem...
update: I've noticed that IGO8 will run fine on the TP2 with Touch flo 3D disabled with only 35mb ram...
Ranney
Well, ran into the same problem on my Igo8 too. Like others said, I have to soft reset it everytime when I encounter that problem...really frustrating it will waste you couples of minutes to do soft reset and wait for the apps to comes out.
Well, i have tried all versions, but still getting the same stupid virtual address. Almost give up, but I like Igo8 interface very much.
I dont know this is really works for you or not. Without me realized after I have installed SecondToday and then ran my Igo8 from here, then I never have this problem again EVER!!! I am a heavy user of this Igo8, cos every where i go, i depend on this gps software. Now I never have this problem again. Thanks Godness.
Hope this help.
hi,
I have got similar issues but in my case it was (most likely) due to the skin I was using (gurjon 6.9.2p).
After I reverted back to the original igo's skin, I have not been reported with any error since last few days.
I am using 8.3.2.97313 [July 3rd] release.
I'm wondering whether a newer WM6.5 ROM will solve it. Maybe Manilla 2.5 (or 6) may make a difference. I'm currently playing around with NRG's ROM, and will monitor iGo8 over the coming days.
i use windows mobile 6.5 without any touchflow. and i have to softreset too.
i can start igo8 any time i want but if i dont softreset before, i will lost the gps signal every 10 seconds.
I've been having quite a big problem recently. Something has been sucking internal memory like crazy. I've flashed several ROMs and still have the same problem of the low memory alert.
I flashed another ROM today and had 144MB of internal memory at noon. Now, without downloading any apps or doing anything major, I now have 133MBs for internal storage. I've currently been using a2sd because iGo is a total space hog and its better than the native gps app imho (doesnt seem to lose GPS signal every few minutes)
The other issue I'm having is the GPS. Its pretty much crucial to me right now because I've been going from Thousand Oaks to LA and everywhere in between and have only found two ROMs that I dont have GPS problems with. Those: EE4.0 and Aloysius
However, both of those have been giving me the low memory warning constantly and I cannot recover space no matter what I delete. I tried deleting iGo (a huge app) and it only accounted for a few MB (the full app is over 20)
I'm quite confused and have never had this problem before.
I've searched the web and it seems theres no solution available at the moment and Froyo takes care of it.
tokyoglow said:
I've been having quite a big problem recently. Something has been sucking internal memory like crazy. I've flashed several ROMs and still have the same problem of the low memory alert.
I flashed another ROM today and had 144MB of internal memory at noon. Now, without downloading any apps or doing anything major, I now have 133MBs for internal storage. I've currently been using a2sd because iGo is a total space hog and its better than the native gps app imho (doesnt seem to lose GPS signal every few minutes)
The other issue I'm having is the GPS. Its pretty much crucial to me right now because I've been going from Thousand Oaks to LA and everywhere in between and have only found two ROMs that I dont have GPS problems with. Those: EE4.0 and Aloysius
However, both of those have been giving me the low memory warning constantly and I cannot recover space no matter what I delete. I tried deleting iGo (a huge app) and it only accounted for a few MB (the full app is over 20)
I'm quite confused and have never had this problem before.
I've searched the web and it seems theres no solution available at the moment and Froyo takes care of it.
Click to expand...
Click to collapse
Well, about the internal memory storage, it could be your cache. Try downloading an app called CacheMate; I'm not sure about the free version, but the paid version has a 'Power Clear' option that clears ALL the cache on your phone. It usually clears about 8-14MB of cache everyday.
Also, 11MB really isn't really a big deal at all, as it will function just as well with 133MB as it will with 144MB.