I have a SDA from t-mobile (germany) and I thought its a Tornado device because the picture of the tutorial from carhoe seems like the phone I have. The picture in the other tutorial of the typhoon device seems different to my phone. Could it be that the SDA in the USA is a tornado and in Gemany its a typhoon device?
I followed the steps from the tornado tutorial untill the step 10. In this step I got an error message (write error) at 83% of programming the "wrong" ROM-Image.
No the phone always starts in the bootloader mode and shows the following informacion:
Typhoon IPL 1.00
Typhoon SPL 2.06.0001
Typhoon
Now I don't know what I have to do to save my phone. I hope you can help me?
Greetings,
Sebastian
if your device is Typhoon flash with official Typhoon rom
Related
hi,
im a noob to this forum and pocket pcs and i think im doing something wrong but when i try to install mfrazzz's xda mobile 6 release 5 final. i its still the same old windows mobile 5
i think my cid is unlocked i followed the instructions given by farias thread.
how would i know if the cid is unlocked? i tried using mestrini's WST tool but i get an error.
thanks in advance
thanks for the help
7331ymerej said:
hi,
im a noob to this forum and pocket pcs and i think im doing something wrong but when i try to install mfrazzz's xda mobile 6 release 5 final. i its still the same old windows mobile 5
i think my cid is unlocked i followed the instructions given by farias thread.
how would i know if the cid is unlocked? i tried using mestrini's WST tool but i get an error.
thanks in advance
Click to expand...
Click to collapse
Always post vital data of the phone,untill it's not known which device you have,G3 or G4,it's hard to provide with any help.Post IPL SPL of your device.
If it's a G3 then its CID locked,you have not followed the correct unlocking procedure.Read the Guide and sticky by Dr.Puttingham and follow it correctly to CID unlock the phone.
If it's a G4,then you cannot straight away flash any Rom to it,to upgrade follow the method as Sticky 'SoftSPL or HardSPL' by equinox in G4 forum.
What error it gives while usung WST 4.2 Tool ?
Cheers !
i have a g3, and the ipl: 1.01 (becuase i downgraded because the instructions told me to) SPL : 2.16
and the wst tool give me a "in the rexx script named : at line number :2840"
and is there a way i can change me ipl back to 2.16? cause nothing is working for me =/
thank you for your response
7331ymerej said:
i have a g3, and the ipl: 1.01 (becuase i downgraded because the instructions told me to) SPL : 2.16
and the wst tool give me a "in the rexx script named : at line number :2840"
and is there a way i can change me ipl back to 2.16? cause nothing is working for me =/
thank you for your response
Click to expand...
Click to collapse
ok, you got ipl 1.01 cuz you downgraded with Button's Rom 1.05 but your spl remained unchanged 2.16,its nothing to worry about,it sometimes take a little more tries to downgrade spl to 1.01,flash the Button's Rom 1.05 a couple of more times to make both ipl/spl 1.xx,only then you can CID unlock the phone with lokiwiz 02b.Follow the guide for downgrading and unlocking at the below link and do the method correct.Your phone is still CID locked,untill you get your phone CID unlocked you can not upgrade to any wm6 Rom.
http://forum.xda-developers.com/showthread.php?t=285435
But if you want to go back to your original wm5 Official k-jam Rom and have ipl/spl 2.16,then Download official k-jam Rom 'K-JAM_WWE_216901_2169101_020710_ship.zip' from official website of i-mate k-jam or from the following link below:-
ftp://ftp.clubimate.com
1.unzip the Rom zipfile,get your phone into bootloaders screen (multicolored screen)by pressing and holding down the camera button and the Power ON button together,the phone will start in bootloaders(multicolored screen) it'll show you ipl 1.01/spl 2.16
2.when in bootloaders,connect your phone with pc via usb cable, a small usb written will appear at the bottom of the multicolored screen of your phone.confirm it.
3.open the unzipped folder of the downloaded Rom,run the RUU icon in it(double click Ruu.exe)
4. follow the instructions and flash the Rom,after completion,your phone will restart and start working.
Good luck !
thank you sooo soo much, im gonna try it again right now
i guess my phones SPL will not change. i must of flashed the ROM with buttons 1.05 about10 times but it still wont change .... oh well im just gonna go back to the stock rom my kjam is WEIRD haha
Please Help
Hello
I have the Kjam G3 (with IPL & SPL 2.16) & wm5. I want to upgrade to wm6.1 but the CID is locked. I tried the WST tools and followed the instructions to unlock the CID but nothing happened.
Please can any body help me to solve my problem and tell me any other way to unlock and where to download the wm6.1.
THANK YOU
READ the FAQs, they hold all of the answers that you need.
While trying to upgrade my ROM from WM5 to WM6.1, I seem to have bricked my SMT5600. I was trying to use the mtty tool, but USB option wouldn't come up. So I then tried to reboot and now it gets stuck while booting on the splash screen. That is with the Audiovox splash screen in the background with the following displayed over it:
Typhoon PV/DVT
IPL 1.00
SPL 1.01.0109
GSM 11.3.13.80
Clean HIVE (1): N
Format Par. (2): N
HEEELP Please!!!
Go through the whole process again following the instructions very carefully step by step. I did the same thing and have recovered my Imate SP3. The lock-up happens if you get one of the steps wrong. It's been a few weeks so I cannot remember which one exactly.
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
?
tried flashing with HTC_1.12.405.01_026790_WWE_SHIP says invalid model...
T-Mobile dead loop ?
I have similar problem with my artemis. I have a HTC P3300 from T-Mobile. It started with switching itself out, then it didn't want to boot, then it began to hang on bootscreen and at the moment i cannot start it at all (even the battery is fully charged and it is pluggen in my PC).
I suspect that T-mobile build in a dead loop somewhere in the software or hardware. It looks very suspicious to me that both mdas i had from T-Mobile start to make problems exactly a month or or two after the warranty is expired. and the problems develop in the same way in deteriorating manner.
It could be that the hardware cannot take it anymore and it starts to deteriorate exactly after the second year (handy for two years contracts).
Does anyone similar experiences or anyone solved that problem.
Sorry mates I cannot provide you with any info about my PPC (radio, rom version etc.) because I simply cannot get so far to be able to see that information.
Looking forward hearing from you
Cheerz
Hi, my problem is similar, but I need the ROM in ITAlian.
Information about my cellphone:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
Any ideea how to download this ROM? Pls help.
Thanks, Fernando.
Here the same...any one help?
kappp13 said:
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
Click to expand...
Click to collapse
Have you tried the CMON USPL? It's on Shady's ROM (the lite one) run this first! Be in Bootloader. Hold the Record Key (left key) and by holding that press Power key to switch on! Then try to Update your ROM
Hi guys,
my Orbit failed in the middle of a flash (in Windows with RomUpdateUtility).
Now I can only get to the bootloader, nothing else.
I think the CID unlock must have failed somehow, because using the SDcard method I cannot flash any cooked ROM. In fact I cannot flash ANY ROM now! I have tried the default shipped 02 ROM's but they all fail at 5% in RomUpdateUtility.exe thru windows, and also fail via the SDcard method (it sits there forever saying reading SD card).
Any ideas? Any other O2 ROM's I should try? Or can I send it for repair to any one off this forum? Should I bin it, maybe the flash chip is faulty?
IPL 1.25.0001
SPL 1.25.0000
Tried (and failed) ROM list:
HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
HTC P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R.exe g
Arteimg.nbh from http://rapidshare.com/files/41614347/OrbitO2UK.rar
art_htcwwe_11240501_026790_wwe_ship from http://www.expansys.com/ft.aspx?k=79618
Vanilla 4.01
Black & Blue 5.0
Thanks for reading, underzone
I have the exact same problem only mine is stuck with IPL 3.04.0001 and SPL 3.04.0000
When i try the original rom (o2 factory) it goes at 4% into Error 226 (something with the Extrom), any other rom wont work since no USPL... damn it.
Any Ideas on this?
Hi,
I have tried to flash a wiza200 that was already flashed with a manila rom, I checked that it is a G4. I used TNT.20273 Professional Wizard HTC Home FREE ROM, it seems to work , romupdate utility indicated that the device was flashed successfully but it reboots on bootloader screen. I tried to reflash it it gave the same result, I tried another rom but impossible to flash it with other roms. So I downloaded the official one from the operator O2 but I got "invalid vendor" message. I searched all the possible solutions but none of them worked( wizard love also). Is there a savior here ? someone who can give me the right procedure to follow.
initially the IPL was 2.21.0001 and spl 2.21 Olipr
now the IPL is 2.21.0001 and spl 2.21
Thanks
Best regards.
You must replace the Update.exe with a MaUpgradeUT_NoID.exe . Found here in Forum . Look in "Blue Angel" for it. Be sure that you flash the right ROM with it . It will no ask...