My progress so far:
Step 1
C:\Rom>pdocread -l
211.25M (0xd340000) FLASHDR
| 3.12M (0x31f000) Part00
| 3.75M (0x3c0000) Part01
| 93.25M (0x5d40000) Part02
| 111.13M (0x6f20000) Part03
7.61G (0x1e6e80000) DSK1:
| 7.60G (0x1e6a80000) Part00
STRG handles:
handle e74c6a56 7.60G (0x1e6a80000)
handle 874150e6111.13M (0x6f20000)
handle 8749a596 93.25M (0x5d40000)
handle 2749a572 3.75M (0x3c0000)
handle a749a3a2 3.12M (0x31f000)
disk e74c6a56
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 874150e6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 8749a596
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 2749a572
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a749a3a2
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* Problems? Try reading this: http://wiki.xda-developers.com/index...s_HowtoDumpRom
Step 2
pdocread -w -d FLASHDR -b 0x800 -p Part00 0 0x31f000 Part00.raw
pdocread -w -d FLASHDR -b 0x800 -p Part01 0 0x3c0000 Part01.raw
pdocread -w -d FLASHDR -b 0x800 -p Part02 0 0x5d40000 Part02.raw
pdocread -w -d FLASHDR -b 0x800 -p Part03 0 0x6f20000 Part03.raw
Copy files to: C:\Dump
Further:
1. Go to the xda FTP (Polaris-folder) and download a WWE file. (ftp://xda:[email protected])
2. Unzip the download from the xda FTP (Polaris-folder). to c:\XDA
3. Download Kaiser kitchen. It works! (http://forum.xda-developers.com/attachment.php?attachmentid=57639&d=1194700488)
4. Unzip Kaiser kitchen to c:\
5. Copy C:\XDA\ruu_signed.nbh, C:\Dump\part01.raw and C:\Dump\part02.raw in the C:\BaseROM folder
6. Read the cooking manual, do not use 3. flash.cmd (Kaiser Flash), it will not work.
--- at the end of the process (before flashing). ---
7. copy the generated ruu_signed.nbh to the C:\XDA folder.
----- To be safe you should install Hard_SPL at this point-----
http://forum.xda-developers.com/showthread.php?t=351964
8. Go to the C:\XDA folder and execute the ROMUpdateUtility file.*
9. Follow the steps.
Good luck.
* I take no responsibility whatever about you destroying your device.
the point is: how to get the "dumped raw file" back to the machine???
Take the Kaiser Rom kitchen! Modify it for Polaris and follow the procedures.
Kaiser is the best kitchen as it is very near the polaris.
Good luck
Roman
banzro said:
Take the Kaiser Rom kitchen! Modify it for Polaris and follow the procedures.
Kaiser is the best kitchen as it is very near the polaris.
Good luck
Roman
Click to expand...
Click to collapse
I stick with the manual for the Hermes.
Tried the kitchen, but it is not very clear to me.
Can you tell me how to get a ruu_signed.nbh for the Polaris?
I tried using a downloaded custom ROM, nenaming it to ruu_signed.nbh, but that ROM is WWE and my cooked
ROM will be Dutch (NL).
Ok, tried the Kaiser Rom kitchen.
Looks like this is the best option.
I managed to create a Dutch ROM and reflash my device. But it is slow as hell compared to the 6.1 WWE version i tried before.
My ROM lacks radio. Does someone know which file to use when creating the rom.
I'm looking for the radio.nbh
I'm trying to dump my Spanish Polaris ROM and I'm following the steps showed by 'session' but this is the response that I obtain from the DOS session: "Copying D:\Instalacions\hardware\HTC\ROMs\ROM utils\itsutils.dll to WCE:\windows \itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync or maybe your device is application-locked."
Any idea? Someone can help me?
Thanks in advance and sorry for my bad english.
PQillu,
pqillu said:
I'm trying to dump my Spanish Polaris ROM and I'm following the steps showed by 'session' but this is the response that I obtain from the DOS session: "Copying D:\Instalacions\hardware\HTC\ROMs\ROM utils\itsutils.dll to WCE:\windows \itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync or maybe your device is application-locked."
Any idea? Someone can help me?
Thanks in advance and sorry for my bad english.
PQillu,
Click to expand...
Click to collapse
Yes, this problem is wel known. It has something to do with unsigned programs. The solution is modifying your registry:
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
can you also explain xip portation in your manual please?
session said:
Yes, this problem is wel known. It has something to do with unsigned programs. The solution is modifying your registry:
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
Click to expand...
Click to collapse
THX for your help.
Now I've my ROM dumped and from now, I'll try to cook my own ROM and also I'll try to recostruct the original ROM in order to prevent possibles crashes.
Regards,
PQillu
Rom Upload
I Have The Same Rom As You Do
__________________
HTC Cruise
Original Spanish ROM
ROM Version: 1.25.412.1 ESN
ROM Date: 13/12/07
Radio Version: 1.58.21.23
Protocol Version: 25.65.30.04H
Can You Please Upload The Rom To The Internet and share the original spanish rom?
Thank You
NDUTU said:
I Have The Same Rom As You Do
__________________
HTC Cruise
Original Spanish ROM
ROM Version: 1.25.412.1 ESN
ROM Date: 13/12/07
Radio Version: 1.58.21.23
Protocol Version: 25.65.30.04H
Can You Please Upload The Rom To The Internet and share the original spanish rom?
Thank You
Click to expand...
Click to collapse
Here you've the link:
http://rapidshare.com/files/95929043/ROM_Original_meva.rar
The main question is how to convert it to a flashable ROM. I'm looking for information but I've no more time to spend for trying solutions. If anyone can help me, I'll appreciate a lot.
PQillu,
banzro said:
Take the Kaiser Rom kitchen! Modify it for Polaris and follow the procedures.
Kaiser is the best kitchen as it is very near the polaris.
Click to expand...
Click to collapse
What do you mean by "modify it for Polaris"? What exactly shall I do?
Alex
Use the Grab-it software.
Jibreil
Can you elaborate on grab-it software?
amarguli said:
Jibreil
Can you elaborate on grab-it software?
Click to expand...
Click to collapse
I was referring to this great software for dumping ROM's
http://forum.xda-developers.com/showthread.php?t=238945
Click to expand...
Click to collapse
Thanks for the information, but actually my question is how to convert dumped files to a flashable ROM using modified Kaiser kitchen. I know how to dump the ROM.
Nobody has an answer?
you can read all about it in the first post, in the wiki-pages and in the kaiser kitchen readme as well.
worked for me.
OK. Thanks. I'll check the readme of kaiser kitchen, because the first post here does not explain what need be changed for Polaris.
After reading readme of kaiser kitchen I have some more questions:
1. If I just want to convert dumped raw files to flashable ROM then I don't need to extract RUU_signed.nbh from WWE "shipped" ROM and put it in BaseROM folder. Instead of this I put Part01.raw and Part02.raw from my dump into BaseROM folder. Is this correct?
2. Does RUU_signed.nbh resulting from the execution of !Cook.cmd script contain also original radio and SPL or OS only?
3. What do I do with Part03.raw and Part04.raw files?
Related
Hi folks,
i've been reading quite a bit here, but found nothing real specific for dumping a original rom of the polaris. could someone please state a little howto, like for the other devices? or can other howtows (eg: dumping elf rom) be used for the polaris ?
thanks a lot....
seminiox said:
Hi folks,
i've been reading quite a bit here, but found nothing real specific for dumping a original rom of the polaris. could someone please state a little howto, like for the other devices? or can other howtows (eg: dumping elf rom) be used for the polaris ?
thanks a lot....
Click to expand...
Click to collapse
found with search...
http://forum.xda-developers.com/showpost.php?p=1847607&postcount=13
cheers!
thanx for your answer, will try to make a backup now.....
cu
ok, i extracted the 4 files, part00-04.raw. how can i create a file to flash for my device ?
seminiox said:
ok, i extracted the 4 files, part00-04.raw. how can i create a file to flash for my device ?
Click to expand...
Click to collapse
And do you want a coffee?
do you know how to search in this board ?
Just found with search function..........
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
bye
ouioui01 said:
And do you want a coffee?
do you know how to search in this board ?
Just found with search function..........
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
bye
Click to expand...
Click to collapse
well sorry for that, i have just been not shure if the description for an elf will work on my polaris. but still got some new question:
i first did a hardspl. to create an archive the guide says is have to:
take the extracted 05_OS.nb as shell/template for your ROMdump, will be overwritten!
D:\_ROM>make_imgfs.exe 05_OS.nb -nosplit
Searching for IMGFS start... Found at 00620000
Fixing... Done!
which can be extracted from
the ruu_signed.nbh from valid RUU_update.exe
so, if i don't have a valid ruu_update.exe (with original german xda orbit2 rom) i have no possibility to follow the instructions...... ???
I'm in the same boat. I want a "clean" orbit 2 but, as we all know, any O2 shop will a) give me **** and b) ask me for a lot of money if I arrive with a custom-flashed orbit 2 I want repaired.
The guide looks good, but isnt really tailored for the current Polaris situation, is it?
From what I know, I guess that I can just take the generic HTC Polaris WWE on the FTP as a signed template and compile my backup ROM that way, right?
And last question: will that revert olis HardSPL too?
schaggo said:
And last question: will that revert olis HardSPL too?
Click to expand...
Click to collapse
not with my device
I also would like to know, if the files provided here
http://wiki.xda-developers.com/index...f_HowtoDumpRom
are lgood to dump my original polaris rom?
Did someone ldo that already?
A step by step guide how to ldump my original polaris rom lwould be great...
Dumping a ROM isnt the problem. Getting the slightly branded/altered O2 ROM (in perspective to the original HTC factory Polaris ROM) back onto the device without an original O2 Updater is going to be the problem, right?
Since the HTC 1.25.405.1 Updater doesnt equal an (whenever it arrives) O2 Updater, right?
So compiling a backup ROM consisting of the currently available HTC WWE Updater and my Orbit 2 ROM backup is going to result in a device which could be identified as a Touch Cruise with O2 ROM extentions and not an original Orbit 2 with an O2 ROM, right?
I tried to dump according the wiki, but it looks different. (see below)
There seem to be some errors. Can anyone help?
D:\rom>pdocread.exe -l
210.88M (0xd2e0000) FLASHDR
| 3.12M (0x31f000) Part00
| 3.75M (0x3c0000) Part01
| 86.00M (0x5600000) Part02
| 118.00M (0x7600000) Part03
7.61G (0x1e6e80000) DSK1:
| 7.60G (0x1e6a80000) Part00
STRG handles:
handle 85ba9956 7.60G (0x1e6a80000)
handle 873ff0f6118.00M (0x7600000)
handle 874995a6 86.00M (0x5600000)
handle 47499582 3.75M (0x3c0000)
handle a74993b2 3.12M (0x31f000)
disk 85ba9956
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 873ff0f6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 874995a6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 47499582
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a74993b2
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D:\rom>pdocread -w -d TrueFFS -p Part02 -t
ERROR: ITTFFSGetInfo - Das Gerõt kann nicht verwendet werden.
WARNING: using default 512 bytes for sectorsize
real nr of sectors: 1 - 512.00byte (0x200)
D:\rom>
http://forum.xda-developers.com/showpost.php?p=1923718&postcount=121
i need send my polaris to HTC for repair, so i need restore original ROM.
before i flash coke rom, i dump original rom.
dump rom log
===========================
C:\itsutilsbin-20080602>pdocread.exe -l
211.00M (0xd300000) FLASHDR
| 3.12M (0x31f000) Part00
| 4.63M (0x4a0000) Part01
| 89.75M (0x59c0000) Part02
| 113.50M (0x7180000) Part03
7.61G (0x1e6e80000) DSK1:
| 7.60G (0x1e6a80000) Part00
STRG handles:
handle 65cb4f5e 7.60G (0x1e6a80000)
handle 4747afde113.50M (0x7180000)
handle e749a586 89.75M (0x59c0000)
handle 8749a552 4.63M (0x4a0000)
handle 8749a392 3.12M (0x31f000)
disk 65cb4f5e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 4747afde
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk e749a586
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 8749a552
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 8749a392
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C:\itsutilsbin-20080602>pdocread -w -d FLASHDR -b 0x800 -p Part00 0 0x31f000 Par
t00.raw
CopyTFFSToFile(0x0, 0x31f000, Part00.raw)
C:\itsutilsbin-20080602>pdocread -w -d FLASHDR -b 0x800 -p Part01 0 0x4a0000 Par
t01.raw
CopyTFFSToFile(0x0, 0x4a0000, Part01.raw)
C:\itsutilsbin-20080602>pdocread -w -d FLASHDR -b 0x800 -p Part02 0 0x59c0000 Pa
rt02.raw
CopyTFFSToFile(0x0, 0x59c0000, Part02.raw)
C:\itsutilsbin-20080602>pdocread -w -d FLASHDR -b 0x800 -p Part03 0 0x7180000 Pa
rt03.raw
CopyTFFSToFile(0x0, 0x7180000, Part03.raw)
C:\itsutilsbin-20080602>
=================================
now, i have 4 raw files
i try to follow below guide
The reverse process is:
'dump' directory ---(ImgfsFromDump)---> imgfs-new.bin ---(ImgfsToNb)--->
OS-new.nb.payload ---(NBMerge)---> OS-new.nb ---(*NBHGen)--->
RUU-signed-new.nbh
(The tools marked with '*' are not part of the ImgfsTools, but are also available for free from xda-developers.com. There is also one additional tool, NBInfo, in this package.) in post http://forum.xda-developers.com/showthread.php?t=298327
i rename the 4 raw files to bin then run ImgfsFromDump.exe but i get below err
C:\ImgfsTools 2.1rc2>ImgfsFromDump.exe Part00.bin Part00-new.bin
ImgfsFromDump 2.1rc2
Compression DLL does not support compression type ''!
any bros know what is the problem.
Try this one
http://forum.xda-developers.com/showthread.php?t=337066
Point 3!
Note:
Compatible with polaris, but at the and of the process, in HTC Rom tool you have to write POLA***** not KAIS*****
Of course, you have to use a Polaris base rom....
(With this I succesfully reconstruced the 1.28.457.2 dumped polaris rom)
i also try to follow jcespi2005 guide http://forum.xda-developers.com/showthread.php?t=337066
but not success
fktsndr said:
http://forum.xda-developers.com/showthread.php?t=337066
Point 3!
Note:
Compatible with polaris, but at the and of the process, in HTC Rom tool you have to write POLA***** not KAIS*****
Of course, you have to use a Polaris base rom....
(With this I succesfully reconstruced the 1.28.457.2 dumped polaris rom)
Click to expand...
Click to collapse
Thx, i will try again.
fktsndr said:
http://forum.xda-developers.com/showthread.php?t=337066
Point 3!
Note:
Compatible with polaris, but at the and of the process, in HTC Rom tool you have to write POLA***** not KAIS*****
Of course, you have to use a Polaris base rom....
(With this I succesfully reconstruced the 1.28.457.2 dumped polaris rom)
Click to expand...
Click to collapse
Hi fktsndr,
according jcespi2005
3. Download the modified version by Alex of Kaiser Kitchen here, that allows to reconstruct the ROM from the dump. The Kaiser Kitchen allows to cook a ROM from a dumped one and from base NBH shipped one. You need to put the NBH file from the step before in the BaseROM folder, and put the RAW files too. Then execute the KAISERKITCHEN.CMD and choose the next options from the menu it this order:
could u tell where i can get the NBH file?
scholescheng said:
Hi fktsndr,
according jcespi2005
3. Download the modified version by Alex of Kaiser Kitchen here, that allows to reconstruct the ROM from the dump. The Kaiser Kitchen allows to cook a ROM from a dumped one and from base NBH shipped one. You need to put the NBH file from the step before in the BaseROM folder, and put the RAW files too. Then execute the KAISERKITCHEN.CMD and choose the next options from the menu it this order:
could u tell where i can get the NBH file?
Click to expand...
Click to collapse
Download the offical base rom:
http://rapidshare.com/files/9162747....1_radio_sign_25.65.30.04_1.58.21.23_Ship.rar
Extract it, you will find an RUU_Signed.NBH file.
Or you just flash the Rom from link above, if you send your polaris for service they dont know what rom you had in your device? right
Or ask the HTC Cutstomer Service to send the rom you have.
An xda-user, Uton did this, and he got the 1.28.457.2 rom.
omaga said:
Or you just flash the Rom from link above, if you send your polaris for service they dont know what rom you had in your device? right
Click to expand...
Click to collapse
my polaris is CHT ROM when i bought it. so i need flash back to CHT version.
my polaris hold on this screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hi all bros, any comment
scholescheng said:
my polaris hold on this screen
hi all bros, any comment
Click to expand...
Click to collapse
lol.........
reyjabs said:
lol.........
Click to expand...
Click to collapse
We got your point, but why the FULL QUOTE all the time...in every thread..??
I burn Polaris Project 0.3 Vanilla or the Polaris_WWE_0.67_Premium_bepe and then burned the original RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30.04_1.58.21.23_Ship ROM and UDK screen disappear.
http://forum.xda-developers.com/showthread.php?t=405903&page=2
Post nr 13.. flash that !
omaga said:
http://forum.xda-developers.com/showthread.php?t=405903&page=2
Post nr 13.. flash that !
Click to expand...
Click to collapse
how to flash???
reyjabs said:
lol.........
Click to expand...
Click to collapse
what is your means?
sagytb said:
I burn Polaris Project 0.3 Vanilla or the Polaris_WWE_0.67_Premium_bepe and then burned the original RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30.04_1.58.21.23_Ship ROM and UDK screen disappear.
Click to expand...
Click to collapse
my polaris can not boot to windows. how can i flash other rom???
could you hlep???
i also try flash rom using micro sd card http://forum.xda-developers.com/showthread.php?t=384084 , but not work.
hold on this screen
Take a deep breath my friend - things may not be as bad as they seem.
Maybe you need to do some more reading and less writing?
Take a look at this: http://forum.xda-developers.com/showthread.php?t=381600
Might provide you with the answer to your problem.
Good luck !
cr1960 said:
Take a deep breath my friend - things may not be as bad as they seem.
Maybe you need to do some more reading and less writing?
Take a look at this: http://forum.xda-developers.com/showthread.php?t=381600
Might provide you with the answer to your problem.
Good luck !
Click to expand...
Click to collapse
Thx bro, i have read this post long long time ago.
but i just want to konw how to flash my brick!!!!
Need any Toshiba TG01 rom - dumped, original anyone.
ROM for TG01
Hi,
I am currently having the French TG01 and I want the English ROM in it. Also could you tell me how to port the WM6.5 ROM to TG01
Regards,
Francis.
fesar said:
Hi,
I am currently having the French TG01 and I want the English ROM in it. Also could you tell me how to port the WM6.5 ROM to TG01
Regards,
Francis.
Click to expand...
Click to collapse
Can you make a dump of rom from your device ? http://forum.xda-developers.com/showthread.php?t=334680
Reg
Hi,
I tried as you said.
C:\Documents and Settings\z000073\Desktop\Utils>pdocread.exe -l
Copying C:\Documents and Settings\z000073\Desktop\Utils\itsutils.dll to WCE:\win
dows\itsutils.dll
433.38M (0x1b160000) DSK1:
| 1.50M (0x17f000) Part00
| 3.38M (0x360000) Part01
| 163.50M (0xa380000) Part02
| 265.00M (0x10900000) Part03
7.42G (0x1daf80000) DSK2:
| 7.42G (0x1dab80000) Part00
STRG handles:
handle#0 8d930242 7.42G (0x1dab80000)
handle#1 2dccfb46 265.00M (0x10900000)
handle#2 2f6ad512 163.50M (0xa380000)
handle#3 cf6ad4ee 3.38M (0x360000)
handle#4 ef6ad4a6 1.50M (0x17f000)
disk 8d930242
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 2dccfb46
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 2f6ad512
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk cf6ad4ee
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk ef6ad4a6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
and then this is what i issued.
pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x17f000 Part00.raw
pdocread -w -d DSK1: -b 0x800 -p Part01 0 0x360000 Part01.raw
pdocread -w -d DSK1: -b 0x800 -p Part02 0 0xa380000 Part02.raw
pdocread -w -d DSK1: -b 0x800 -p Part03 0 0x10900000 Part03.raw
now it is extracting the same.
What's next. Do you want me to upload it here.
Regards,
Francis.
Reg: DUMP of Toshiba TG01 ROM
Hi,
Please find the link. I have uploaded the DUMP here. Please tell me how to proceed further and changing this DUMP from French to English.
http://rapidshare.com/files/253526287/Utils.rar
Regards,
Francis.
Dumped rom is here. As I know, for reconstructing dumped roms need rom kitchen Also need at least one original rom, downloaded from toshiba support site for litle hacking. This is a litle help, but we still don't know what type of flashable file uses toshiba and still don't have any original rom.
Another thing, "maybe" (I'm not 100% sure, not even 10%) toshiba tg01 is htc based device. "If" it's, can somebody try to enter bootloader mode - if it exist
How to enter: volume down and reset simultaneously, CAMERA + SOFT RESET, or CAMERA+POWER+SOFTRESET etc
---------------------------------------
Reg: Dump
I tried all the combinations of the key with reset nothing happens. If i keep pressing VolumUp + Power + Camera it goes to master reset mode.
Hey, i´ve got the O2 Version of the TG01 (SW V. 5001.0102.57 SP-00).
How can i help you?
None of your combinations or others produced any kind of useful effect except of locking the screen.
€: Forgot to ask something, there are quite some opengl accelerated games out there, like the quake series. Is there any realistic scenario in which we could enjoy this with the Power of the TG01 in the near future? Recent experiments with Fpsece have left me drooling. ^^
It seems that nobady is interested for developing for this device Maybe it still early or something else, I don't know
Hi,
I'm a french user of the tg01.
I would love having a good rom, or maybe a winmo 6.5 rom.
If I can help someone developping a new rom (I can dump my rom, or test a new rom...), I'd love it.
I hope someone will be interested in developping for this mobile.
Good night
Pipolas.
ps: I apologize for my bad english...I'm french
I'm using the japanese version,is terrible to understand em setup the phone,but I'm learning...
anyone interested in helping us?Please...
hey all
As xda will not have a dedicated sub forum for Toshiba tg01 (a pity), I suggest you all got to MoDaCo.com which now has a dedicated sub forum for the tg01. It was this forum that made i900 what it is today.
http://TG01.MoDaCo.com
If you look in the i900 section, you can see that huge activity and rom cooking going on there a, so don't be fool by the new topic. http://www.modaco.com/category/342/i9x0-omnia-http-omnia-modaco-com/
Come on mates, post your experience here http://TG01.MoDaCo.com
Got TF3D from topaz running just fine on TG01 right now. Gotta patch a few programs to bypass valid-htcdevice checks, and it'll be a sweet ass phone. Have to install all via cabs for now though, as we really need to program this device. May not even need a hard-spl, as some devices don't even check for valid signatures. But we do need to know what RUU method is used, so please someone post up a valid tg01 flashing program to dissect it.
Until Toshiba releases a software upgrade, there's no RUU (or DSUU in Toshiba terminology) available to the public to dissect.
Chances are DSUU will be similar to one Toshiba had used with their other PDAs G900, G910 and G810. You could start looking at it to get an idea of how upgrade process works...
http://www.toshiba.co.jp/product/etsg/cmt/english/asian/index.htm
I don´t know if this is any help, but there seems to be an software update in form of a .tiu file (SP-00 > SP-01) available for the Docomo T-01A, which is the japanese Version of the Toshiba TG01.
It should be the update that patched the error where you couldn´t dial some numbers. But maybe there are some other useful information inside for you.
Have a look at it here:
http://toshibamobile.com/docomo/t01a/update/pc/
Greetings,
Sin
Is this information true
http://crave.cnet.co.uk/mobiles/0,39029453,49302940,00.htm
If so, the TG01 will get the WM6.5 OTA update. But when ?
Yes, i´ve read that on many sites, so i guess that should be true. Since WM 6.5 is available it shouldn´t take too long?
SinSilla said:
I don´t know if this is any help, but there seems to be an software update in form of a .tiu file (SP-00 > SP-01) available for the Docomo T-01A, which is the japanese Version of the Toshiba TG01.
It should be the update that patched the error where you couldn´t dial some numbers. But maybe there are some other useful information inside for you.
Have a look at it here:
http://toshibamobile.com/docomo/t01a/update/pc/
Greetings,
Sin
Click to expand...
Click to collapse
a saw this week or two ago, but uselless need to copy that file to phone and run from there.
fesar said:
Is this information true
http://crave.cnet.co.uk/mobiles/0,39029453,49302940,00.htm
If so, the TG01 will get the WM6.5 OTA update. But when ?
Click to expand...
Click to collapse
yes, ota upgrade to 6.5 is true for tg01 and next tg0x devices, htc etc etc
hi,
it seems to be that the next gen of 914c has released with the wm 6.5 os.
does any one use this phone?
can you dump the rom and upload here.
It will be useful for cooker to make the "like HP" rom for 914c.
The phone is only avaible in America, ut if someone manages to dump to rom pherhaps we could have a native 6.5 kernell for the 9xx series?????
highly doubt you can have native kernel as nk.exe is very specific to one device. most likely the best you can do is take some software from the dump
keyx said:
highly doubt you can have native kernel as nk.exe is very specific to one device. most likely the best you can do is take some software from the dump
Click to expand...
Click to collapse
ow yeah your right about the nks, I forgot
Pherhaps some new updated HP apps when there is a rom out.
Yes, also interested in extracting some soft from glisten
I have an iPaq Glisten, will be willing to dump the ROM if someone can provide me with the Instructions. Have access to both a XP and Win 7 PC's
Thanks
can you download this tool:
mediafire
after unrar, run the command prompt in the folder, then run the following command with activesync connected to your device:
.\Tools1\pdocread -l
.\Tools1\pdocread -t
and paste the result here so we can determine the size of rom that you need enter for the next command. thanks
if the second command (pdocread -t) return something similiar to this:
real nr of sectors: 163840 - 80.00Mbyte, 0x5000000
where 0x5000000 is your rom size (in this example, this is 61x rom size)
then run this command (repalce 0x5000000 with the size you obtaind in the above command:
.\Tools1\pdocread 0x0 0x5000000 diskimage_Ver.nb0
and upload the nb0 file to somewhere for us =)
waiting ....
I get the following errors when I run the command on my PC
C:\Users\XXX\Desktop\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\TOOLS1>pdocread -l
Copying C:\Users\xxx\Desktop\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\TOOLS1\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
or maybe your device is application-locked.
C:\Users\xxx\Desktop\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\TOOLS1>pdocread -t
Copying C:\Users\xxx\Desktop\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\RAW_NB0_XI
P_TOOL\TOOLS1\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
or maybe your device is application-locked.
I tried resetiing the device to factory defaults as well
Any ideas ?
batrad said:
I get the following errors when I run the command on my PC
C:\Users\XXX\Desktop\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\TOOLS1>pdocread -l
Copying C:\Users\xxx\Desktop\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\TOOLS1\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
or maybe your device is application-locked.
C:\Users\xxx\Desktop\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\TOOLS1>pdocread -t
Copying C:\Users\xxx\Desktop\RAW_NB0_XIP_TOOL\RAW_NB0_XIP_TOOL\RAW_NB0_XI
P_TOOL\TOOLS1\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
or maybe your device is application-locked.
I tried resetiing the device to factory defaults as well
Any ideas ?
Click to expand...
Click to collapse
If I remember it well the application is trying to copy the itsutils.dll to your device and you need to accept it other wise it fails
try this reg hack:
HKLM\Security\Policies\Policies
valuename '00001001' was set to dword:2, change it to dword:1
success after the reg key hack.. any idea which partition I would need to dump (asuming Part02), and what the correct command string would be for procread ?
pdocread -l
410.63M (0x19aa0000) DSK1:
| 2.12M (0x21f000) Part00
| 3.25M (0x340000) Part01
| 119.75M (0x77c0000) Part02
| 282.00M (0x11a00000) Part03
23.75M (0x17c0000) DSK2:
| 23.75M (0x17bf000) Part00
1.84G (0x75e00000) DSK3:
| 1.84G (0x75c07200) Part00
STRG handles:
handle 35572e32 1.84G (0x75c07200)
handle d5bf7cea 23.75M (0x17bf000)
handle b5f3ba8e282.00M (0x11a00000)
handle b5fb8dae119.75M (0x77c0000)
handle 55fb8d8a 3.25M (0x340000)
handle 55fb8d42 2.12M (0x21f000)
disk 35572e32
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk d5bf7cea
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk b5f3ba8e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk b5fb8dae
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 55fb8d8a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 55fb8d42
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pdocread -t
real nr of sectors: 1 - 512.00byte, 0x200
now to find a place to upload the file..
Any place to upload the file for free ?
try mediafire.com
So which partions do you want dumped ?
410.63M (0x19aa0000) DSK1:
| 2.12M (0x21f000) Part00
| 3.25M (0x340000) Part01
| 119.75M (0x77c0000) Part02
| 282.00M (0x11a00000) Part03
23.75M (0x17c0000) DSK2:
| 23.75M (0x17bf000) Part00
Because pdocread -t
real nr of sectors: 1 - 512.00byte, 0x200
shows a 512 byte partition, which is not the ROM (I hope)..
Also appreciate if you can give me the commands I need to run to get the correct dumps.. sorry am new at this
Thanks
I suppose Part03 is your program storage, you can verify by checking your main storage size in setting->system->memory.
ok try this to extract the imgfs (suppose to be part02):
pdocread -w -d DSK1: -p Part02 0 0x77c0000 Part02.raw
I think part01 is the xip, you may also extract it with this command:
pdocread -w -d DSK1: -p Part01 0 0x340000 Part03.raw
if there is error you can add the -b 0x800 switch to read using specific sectorsize
e.g
pdocread -w -d DSK1: -b 0x800 -p Part02 0 0x77c0000 Part02.raw
seems like the setup looks alike to ipaq21x...for fun you can also try using different hardware button(s) to see if you can get into bootloader mode .etc (not that i will build a rom for it haha..)
I have dig some more detail from pdadb apparently this device is manufactured by Pegatron (an ASUS division that do ODM (i.e built device for other brands) )
Hi, did you successfully dump the ipaq glisten? Dumping the ROM can unlock the phone? Mine is still locked with ATnT. Can you guys help me unlock it?
mercurous23 said:
Hi, did you successfully dump the ipaq glisten? Dumping the ROM can unlock the phone? Mine is still locked with ATnT. Can you guys help me unlock it?
Click to expand...
Click to collapse
we are still waiting for the dump, and dumping the rom does not mean unlocking...unlocking is a lot of more complicated and I have no idea on that
i got a hold of the rom dump from a member, mediafire is too slow now so i probably upload later when I back home.
keyx said:
i got a hold of the rom dump from a member, mediafire is too slow now so i probably upload later when I back home.
Click to expand...
Click to collapse
Anything usuable?
Hello devs,
I need to cook my own ROM for my device (digibee SP1) which doesnt have any custom ROM (And you cant find any info regarding this device in google search ).
And this device is based on Marvell PXA310 processor,
256 MB ROM,
256 MB RAM,
3.6" WVGA Display,
3.0MP primary and 0.3 MP secondary cameras,
Bluetooth 2.0,
Wi-Fi 802.11b/g,
GPS (SIRF III).
These are the specs,
Now i want to cook my own windows mobile 6.5.x ROM, can you please let me know where to start and which device base ROM need to be used?
I have found that Omnia i900 uses same processor,can i choose i900 ROM for my project?
And i my device registry i have found then many driver .dll file names contain zylonite (eg:- zylonite_lcd.dll), and these zylonite name based driver files were also present in samsung Omnia i900.
And is there any way to find what hardware parts were used in my device? like audio chip model, what peripheral controllers were used, etc. So that we can use the drivers from the respective devices.
Please guide me guyz.
No answers???
Are you aware of the whole work-flow of replacing a ROM? Cooking a ROM is just one part of it - and not the most complicated one since we have OS Builder. You have to solve the following challenges:
dump the existing ROM, so you get all the need OEM packages
rebuild that one to see if you can do it
upload the cooked ROM
now you can pull another ROM from another device, you best pick a widely used one which is similar to your device
Do a XIP and SYS port with OS Builder (a lot of traps to catch here)
upload the cooked ROM
Each of the above steps has several challenges on its own and you need different expert know-how for each of them. Best is to find a dedicated forum for just this device and discuss there.
Most users here have HTC devices or (from their history) ASUS. It is a hard life for those not following the mainstream..
tobbbie said:
Are you aware of the whole work-flow of replacing a ROM? Cooking a ROM is just one part of it - and not the most complicated one since we have OS Builder. You have to solve the following challenges:
dump the existing ROM, so you get all the need OEM packages
rebuild that one to see if you can do it
upload the cooked ROM
now you can pull another ROM from another device, you best pick a widely used one which is similar to your device
Do a XIP and SYS port with OS Builder (a lot of traps to catch here)
upload the cooked ROM
Each of the above steps has several challenges on its own and you need different expert know-how for each of them. Best is to find a dedicated forum for just this device and discuss there.
Most users here have HTC devices or (from their history) ASUS. It is a hard life for those not following the mainstream..
Click to expand...
Click to collapse
Thank you for your info, is there any guide which help me to start my work.?
No there is no guide for the full work-flow. Care for the steps individually and seek around the various sites - including this one. This is a project for experienced hackers only - nothing to pick a recipe from a book and start cooking.
tobbbie said:
Are you aware of the whole work-flow of replacing a ROM? Cooking a ROM is just one part of it - and not the most complicated one since we have OS Builder. You have to solve the following challenges:
dump the existing ROM, so you get all the need OEM packages
rebuild that one to see if you can do it
upload the cooked ROM
now you can pull another ROM from another device, you best pick a widely used one which is similar to your device
Do a XIP and SYS port with OS Builder (a lot of traps to catch here)
upload the cooked ROM
Each of the above steps has several challenges on its own and you need different expert know-how for each of them. Best is to find a dedicated forum for just this device and discuss there.
Most users here have HTC devices or (from their history) ASUS. It is a hard life for those not following the mainstream..
Click to expand...
Click to collapse
Hello tobbbie,
Can i dump my ROM using XDA OSImageTool??? And is it possible to create flash-able image using the BIN files created using it??
http://forum.xda-developers.com/wiki/OSImageTool
digibee SP1 ROM RAW dumps.
Hello,
I have dumped my device ROM using OSImageTool and pdocread, are those files created using these tools sufficient for cooking a ROM? If they are just sufficient then which kitchen should i choose to cook my .RAW/.nb1 files?
This is my log,
Code:
C:\Users\Goutham>cd C:\dump
C:\dump>pdocread.exe -l
Copying C:\dump\itsutils.dll to WCE:\windows\itsutils.dll
247.38M (0xf760000) DSK3:
| 1.25M (0x13f000) Part00
| 2.13M (0x220000) Part01
| 82.63M (0x52a0000) Part02
| 161.38M (0xa160000) Part03
1.75M (0x1c0000) RSV1:
| 1.75M (0x1bf000) Part00
7.28G (0x1d2380000) DSK1:
| 7.28G (0x1d1f80000) Part00
STRG handles:
handle#0 ae1e1a26 7.28G (0x1d1f80000)
handle#1 6fa5a71e 1.75M (0x1bf000)
handle#2 6fc75882 161.38M (0xa160000)
handle#3 8fc8a4ae 82.63M (0x52a0000)
handle#4 2fc8a48a 2.13M (0x220000)
handle#5 afc8a442 1.25M (0x13f000)
disk ae1e1a26
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 6fa5a71e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 6fc75882
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 8fc8a4ae
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 2fc8a48a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk afc8a442
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C:\dump>pdocread.exe -w -d DSK3: -b 0x800 -p Part00 0 0x13f000 Part00.raw
CopyTFFSToFile(0x0, 0x13f000, Part00.raw)
C:\dump>pdocread.exe -w -d DSK3: -b 0x800 -p Part01 0 0x220000 Part01.raw
CopyTFFSToFile(0x0, 0x220000, Part01.raw)
C:\dump>pdocread.exe -w -d DSK3: -b 0x800 -p Part02 0 0x52a0000 Part02.raw
CopyTFFSToFile(0x0, 0x52a0000, Part02.raw)
C:\dump>pdocread.exe -w -d DSK3: -b 0x800 -p Part03 0 0xa160000 Part03.raw
CopyTFFSToFile(0x0, 0xa160000, Part03.raw)
C:\dump>pdocread.exe -w -d RSV1: -b 0x800 -p Part00 0 0x1bf000 Part00.raw
CopyTFFSToFile(0x0, 0x1bf000, Part00.raw)
C:\dump>
And here are the dumps (I have found 3 disks in my device including MicroSD card under pdocread.exe disks list)
DSK3: (Disk 1)
DSK3_Part00.raw
DSK3_Part01.raw
DSK3_Part02.raw
DSK3_Part03.raw
RSV1: (Disk 2) (Don't know what this disk is..)
RSV1_Part00.raw
DSK1: (MicroSD)
No dump...
Please help me to cook a ROM using these dumps guys....
any body???
http://forum.xda-developers.com/archive/index.php/t-1525574.html