Hi I have an AT&T 8525 that I have flashed with Schap's WM6 pro 4.31 lite rom. I am trying to flash back to AT&T wm6 rom but every time I run the RUU it goes to the bootloader then the next screen is a white screen that says "loading..." so I wait to see if it loads slowly but it times out and returns to the bootloader screen. I have tried flashing from the SD card but it does the same thing. I have tried to soft reset then I tried to hard reset but I still get the same message. The utility goes to an error screen saying connection error. Is there anything that I can do to get this to work?
take out your sd card and run the RUU
THANK YOU!!! The fix worked perfectly. Outstanding!!!!!!
hello,i got a problem i tried to flash few roms and after when i tried them they were hanging up,so i downloaded another and i couldn't turn the phone several times but somehow it worked and turn on so,i was putting it on device by RUU and in 48% it stopped and show error message and after 4 steps i've done them and disconnected phone from pc,taken battery out that was in these steps and after when now i am trying to do a hard reset or soft reset it sometimes doesn't turn on and sometimes goes to bootloader that only what it's doing, i can't even do hard reset because it goes everytime to bootloader, i don't have idea what to do so please help me,is any way to flash rom without RUU?
Have you CID unlocked the phone already with USPL or HSPL? That would be the first step, and might be the problem.
i think i done,because in bootloader it says SPL 2.26.0000
yes, u can flash without RUU. rename ur rom file to ELF0IMG.nbh and put it in the root of ur sd card (formated in fat32).
so,that what i done i putted the sd card to nokia made usb connection between pc with xp and nokia transferred the rom on the sd card,unplugged nokia,token out card putted it to elfin and hold power button and it get me first to searching SD card communicate and after to bootloader and nothing happens, i leave it for couple of minutes on searching sd card communicate and nothing than happens i changed it to FAT32, the elfin is from orange uk.
PLEASE HELP ME!!!!!
NOW when i put the sd card in and keep camera and power buttons it get me to message "update sd image?" and "press power key to start download" but in this time it getting blinking and few seconds after screen go white,i am trying to press power but nothing happens appart turning screen into white PLEASE HELP ME UNBRICK MY PHONE.
I was trying to upgrade my ROM to windows 6.1, and something wrong happened.
the update software hangs up on 0% also in my phone, form more than hour.
then I unplug the USB cable, and connect it again, the wizard told me that process will be resumed, but the same for more than hour and nothing happened when i reconnect it again it gives me error connecting
now my device is no longer working, it just give me a colored screen and nothing happened.
is there is anyway to fix my phone.
Is there anybody ? any idea ??
This might help.
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
thank you jeremy,
I tried this method but it didn't work.
first i get the SD card and format it using windows (i tried both FAT, FAT32)
then extract the .nbh file from this package RUU_Elf_DOPOD_AU_1.14.710.2_4.1.13.46_02.97.90_BLUE_Ship.exe,
then i renamed it to ELF0IMG.nbh copied it to the root of SD card, then put the SD card in my device,
push and hold camera button and push the power button then the colored screen appeared but nothing happened. i tried also press and hold camera button then soft reset using stylus but it didn't work.
am i doing something wrong
Sorry i tired you
It should work.
It should say like ' do you want to flash your phone ' , press the power key to continue..
mmm, have you CID unlocked your phone?
have you tried flashing your phone?
how can i do that "CID unlock" ?
Go to the elf-upgrading forums and flash your ipl and spl to 3.10.
Cheers.
Can you start your phone in the first place?
no I cannot start my phone. it just freeze on the colored screen
Can anyone help me?
I was flashing back to stock SPL, using sd card, and pulled the sd card out while it was flashing (don't ask, I seemed to forget for a moment what I was doing and realized I needed my card for my other phone) Now, I have the stock SPL, shows PANT200 SPL-0.36.0000 CPLD-2 when phone starts, and says "Upgrade ROM code error Please Try Again". But, if I put my sd card in it with PANTIMG.nbh SPL file, then I get a screen that says "Loading...". And that's it, left it like that forever it seems and no change.
Any idea? It won't connect to the computer so I can't flash from computer. Even QPST won't find it.
FWIW: I do kinda know what I am doing. Unlocked mine and wife's Treo Pros with Cmonex hard spl, and flashed several ROMs, including a couple I cooked with NightRaven's kitchen. I was just going back to stock cause my wife doesn't like changes, and now this happened.
TIA,
Malachi
OK, thanks to cmonex I got this working again. Had to connect to mtty and run: set 16 0.
Did that and soft reset, and Voila! my Pro works again..
Thanks Cmonex!!!!
Out of curiosity:
I need to revert to the original stock spl as well. Have not found a way yet...Could you offer me some guidance.
Thanks.
Hello,
I have a problem, when I connect my phone with the USB cable to my computer, it doesn't do anything. He don't recognize the phone, doesn't make any connection nor see the SD card.
I've already tried to clear the box: Enable faster data synchronization, and tried to choose Disk Drive (Faster file transfer), it all doesn't do anything.
Tried different PC's, with WMC and Active Sync 4.5, with different OS's.
The cable isn't broker or something because the only thing that happens when I connect the phone with my PC is that the orange light (battery charge) is on.
I've installed Shadowline ROM, but it did work with that rom (active sync and disk transfer).
I think it is a problem of the ROM tho, so is there any way to flash my ROM without using a PC?
Answers would be realy appreciated.
Thank you.
nzane said:
Hello,
I have a problem, when I connect my phone with the USB cable to my computer, it doesn't do anything. He don't recognize the phone, doesn't make any connection nor see the SD card.
I've already tried to clear the box: Enable faster data synchronization, and tried to choose Disk Drive (Faster file transfer), it all doesn't do anything.
Tried different PC's, with WMC and Active Sync 4.5, with different OS's.
The cable isn't broker or something because the only thing that happens when I connect the phone with my PC is that the orange light (battery charge) is on.
I've installed Shadowline ROM, but it did work with that rom (active sync and disk transfer).
I think it is a problem of the ROM tho, so is there any way to flash my ROM without using a PC?
Answers would be realy appreciated.
Thank you.
Click to expand...
Click to collapse
You can flash from the storage card, just rename the .nbh file to TOPAIMG.nbh and put on the root of your storage card, go to bootloader mode and it will flash.
Your cable can be bad and still charge. I would try a different cable.
Also try deleteing the partnership in Active Sync and try to reestablish it.
I assume you hard reset after you flashed the ROM.
I do not think its a ROM issue.
Ok thanks for your reply.
I did what you sad but when I loaded the TOPAIMG.nbh in the bootloader, it came up with an error and freezes on: Loading ...
When I restarted it It Only shows:
___________________________
RUUNBH
TOPA100 32M
SPL-1.83.000
MicroP-Topaz (LED) v10
TURBO HW/TURBO SW
TP MFG DATA
510,547 180,883
177,209 842,207
844,844 Calibrated
Upgrade ROM code Error
Please try again
_______________________________
And then he goes to the white screen with the blue letters saying: Loading...
(I waited many times, one time for 2 hours but nothing happend).
When I put out my SD-card and the battery and connect the phone with the USB (my pc still don't see recognize anything) it will boot to the exact same screen as I typed here above but then he stays at that one.
I can't do anything, already tried to hard reset him but that also didn't work.
It feels like im pretty screwed..
Please help!
Maybe you have a problem with the mini USB.
Happen to me with Touch HD.
If so take it to a reppair shop.
Well, I borrowed and USB cable from my friend and now he indeed makes an connection. But no active sync connection. I also can't see my SD card in My Computer. He still only shows the screen that I typed here above, but then under in the white area a little text: USB
What do I have to do next to fix it,
please help
thanks
nzane said:
Well, I borrowed and USB cable from my friend and now he indeed makes an connection. But no active sync connection. I also can't see my SD card in My Computer. He still only shows the screen that I typed here above, but then under in the white area a little text: USB
What do I have to do next to fix it,
please help
thanks
Click to expand...
Click to collapse
I am concerned that you screen shot shows SPL 1.83.00, but you have flashed Shadowline's ROM.
It should say SPL: 1.83.00Olinex which would mean you have HSPL installed which is absolutely required to flash a custom ROM.
Did you have that ROM operational and just couldn't sync, or has the device not worked since you flashed this ROM?
Yes, I had the shadowline ROM, and it al worked good. I also could connect my mobile to my pc with the USB cable.
I don't know what happend, I didn't install any other program or something else but I suddently couldn't connect my mobile phone to my pc anymore.
But I wanted another ROM because I noticed that the Shadowline ROM feld a little bit laggy, so I found out that you can do that by your booting with the SD card.
And I know that you have to install hardSPL first, so I downloaded that one from the big post in this ROM forum from Topaz.
Booted with the SD card, and then when I started to flash the ROM he gave an error and now I have to problem that I can't do anything anymore.
nzane said:
Yes, I had the shadowline ROM, and it al worked good. I also could connect my mobile to my pc with the USB cable.
I don't know what happend, I didn't install any other program or something else but I suddently couldn't connect my mobile phone to my pc anymore.
But I wanted another ROM because I noticed that the Shadowline ROM feld a little bit laggy, so I found out that you can do that by your booting with the SD card.
And I know that you have to install hardSPL first, so I downloaded that one from the big post in this ROM forum from Topaz.
Booted with the SD card, and then when I started to flash the ROM he gave an error and now I have to problem that I can't do anything anymore.
Click to expand...
Click to collapse
I guess my point was if you had Shadowlines ROM, you were already HSPL'd, no need to do again.
Hard reset the phone and try to install ROM from SD.
Hi,
i had once the same problem. No connection with PC anywhere. I couldnt do nothing with that and was quite desperate about that.
But once suddenly it came to work again. I am not sure what made it work again but the only thing I can guess was that I took out and gave back the memory card with the turned on phone. Since then I have never had this problem again.
I wish you that this taking out of memory card helped you too.
Well, If I'm hard resetting, the only thing he does is show the percentages, then he says completed, then he reboot en I'm back at the tri-color screen again.
And I can't enter the bootloader, so I also can't install the ROM from the Sd-card.
And taking out the memory card while the phone is on also dont work
Any other options what maby will work?
nzane said:
Well, If I'm hard resetting, the only thing he does is show the percentages, then he says completed, then he reboot en I'm back at the tri-color screen again.
And I can't enter the bootloader, so I also can't install the ROM from the Sd-card.
And taking out the memory card while the phone is on also dont work
Any other options what maby will work?
Click to expand...
Click to collapse
Just some points;
Make sure the .nbh file is named excatly TOPAIMG.nbh paying attention to the case of the letters.
When you attempt to go into Bootloader, Holding Voume Down and Power buttons at the same time when phone is off, what screen appears?
[Q] my handset doesn´t recognize sd apps
I had the same problem as well, so I deactivated and reactivated the SD card from the phone, actually I cant take out the sd with the turned on phone. It worked once, but it happened again so i tried to the same but know the deactivate function in settings doesnt worked. Now i dont know what to do. if anyone could help me i would be very thankful.
My handset is a xperia x10 with 2.1 generic flashed bb 2.1.54, and 2.2 wolbreak gingerbread rom.
eiffeltom said:
Hi,
i had once the same problem. No connection with PC anywhere. I couldnt do nothing with that and was quite desperate about that.
But once suddenly it came to work again. I am not sure what made it work again but the only thing I can guess was that I took out and gave back the memory card with the turned on phone. Since then I have never had this problem again.
I wish you that this taking out of memory card helped you too.
Click to expand...
Click to collapse