Rogers Name Display! - Windows Mobile Development and Hacking General

Let's get this solved. I willing to Donate $25 dollars to the person who solves this mystery.
Rogers Name Display:
What is it?
Rogers Name Display is a enhanced call display, instead of normal call display service displaying a number, it also sends the cell phone their name and the number.
eg: normal call display: 1-416-222-2222
eg: Rogers name display: Joe Smith 1-416-222-2222
name will display even though you dont have it in your phonebook.
this is just a software issue, not a hardware issue as Rogers carries their own branded htc phone like Touch, Tytn. it works with their rom but it wont work with a non branding phone.
I am not smart to figure this out, someone out there will be able to figure this out.

Related

Please Help, Caller ID screwy and Need to be fixed on New Ro

Hi, I just upgraded to the new ROM and now whenever I get a call the caller ID decides to include two additional 1's in front of the number. I can understand adding one 1 because I live in the US, but the other one? For example for a 203 area code it will show up 1 (120) 302 9355 1....This is a HUGE problem cause it distorts the whole number and the numbers in my phone book don't match. Please help!!! Is there a registry hack or anything I can do?
It's possibly to do with the US international dialing code being +1. When I was in the US there seemed to be no standard way of specifying international numbers (because the US/Canada don't follow the conventions used in the rest of the world) - when I got a call from an international number, it would sometimes show as +447740123456, or sometimes 011447740123456, or even worse, sometimes 0114477401234 (cutting off the last few digits of the number!) - that was for calls from the UK. This seemed to vary by whatever network I was roaming on.
What I do notice though, normally the caller ID works pretty well regardless what junk shows at the start of the number, as long as the last 8 or 9 digits match it tallys it up with the contact number...
Not sure how you can fix your problem, I expect there is a registry value which sets the phone number format for various places in the world, but I dunno what it is. I'm guessing you upgraded a US-based ROM (T-mob/Cingular?) to a European/ROW ROM (i-mate/qtek?)
Actually no, just updated the ROM to universal English, just keeping it simple. I had no problem with this ever, and its frustrating becuase yes it is an international 1 at the beginning but it screws up the area codes, so therefore the wrong number gets called. Since i use this for business and need to store many of the incomming calls in my phonebook its been the biggest hassle and would appreciate anyone that could help on this matter.
Thanks guys. I have cingular.
By European, I meant a Q-tek/i-mate based ROM as opposed to a Cingular/T-Mobile based ROM. Since the most up to date ROMs are Q-tek and i-mate, I assume you updated to one of these (which aren't targetted at the US market). Hence, WWE or not, there would appear to be some setting for the US phone system and the rest of world phone system.

Hermes not showing name display

My provider, Fido, offers a service where the name of the caller and telephone number show up. It's called name display. Unfortunately, on the hermes, the name does not show up. I only get the telephone number.
I have used another phone with this service and the service works.
I have been through several roms and they all give the same result. Any clues to what could be going on?
bump bump77
I never knew there was this funtionality from the provider......
Always thought there was a conversion on the phone when there comes a call in. Number recognition is we'll known, name send with the provider I have never heard off.....
Hope someone has an answer for you!
http://www.fido.ca/portal/en/support/namedisplay.shtml#q01
"What is Name Display?
It's a unique service exclusively offered by Fido and Rogers that lets you see on your handset display a caller's NAME and phone number from Fido, Rogers Wireless and landline callers across the nation, even if it isn't entered in your phone book. So you'll always know who's calling you. "
dying to find a solution
I have Hermes from Rogers. I have name display and of course stop working after upgrading to WM6.
just to prevent duplication, please read what I've done so far at the following link:
http://forum.xda-developers.com/showpost.php?p=3078617&postcount=9
I don't have enought info or experience. Can anybody help? Work together or direction whatever...
This cannot be impossible. I don't think HTC developed a driver only for Rogers.

Rogers Name Display! Please Help us find a solution.

Let's get this solved. I willing to Donate $25 dollars to the person who solves this mystery.
Rogers Name Display:
What is it?
Rogers Name Display is a enhanced call display, instead of normal call display service displaying a number, it also sends the cell phone their name and the number.
eg: normal call display: 1-416-222-2222
eg: Rogers name display: Joe Smith 1-416-222-2222
name will display even though you dont have it in your phonebook.
this is just a software issue, not a hardware issue as Rogers carries their own branded htc phone like Touch, Tytn. it works with their rom but it wont work with a non branding phone.
I am not smart to figure this out, someone out there will be able to figure this out.
Another post where we are getting few to donate, also there are few interesting discoveries mentioned there:
http://forum.xda-developers.com/showthread.php?t=347882

other ringtone for forwarded calls

hello,
I'm using a HTC Kaiser with a WM 6.1 rom.
Sometimes I forward a normal wired telephone number via the isdn forwarding feature ( i active this using *21*numertoforwardto# on my wired telephone here in germany) to forward incoming calls to my mobile.
When now someone calls my wired number the call is forwarded to my cellular phone, and the real caller ID is displayed (so not the id of my number I forwarded from). I think this is because it is forwarded by my provider when I use the ISDN feature and not by my phone.
My old mobile (sony ericson W810i) showed a message when a forwarded call was received(while also displaying the real caller id), which indicates, that something in the gsm or umts protocol tells the phone that it is a forwarded call. As I want to be able to distinguish if the call I receive is forwarded or not on my new phone, too, I want to know, if there is a way or tool to either display a message when I receive a forwarded call or assign another ringtone to it on my HTC Kaiser?
bcom
Did you ever find a solution? Same issue here!
Hello, I'm writing in the hope that you've found a solution to your forwarded call problem. On my old phone, a Sony Treo 650, the phone could distinguish between forwarded and original calls and I could answer them appropriately.
On my blackberry 8900, there is a brief flash on the screen that distinguishes a forwarded call, but neither the blackberry programmers nor my tmobile carrier can tell me how to generate a separate ring tone for such calls.
If you found a work-around, I'd be grateful (as would thousands of others with an identical need) for some advice.
My name's Ed. Hope to hear from you.
Kind regards.
I'm also writing in hope that you have found something to identify the forwarded call.
It does not show on mt HTC Glacier froyo 2.21. Neithet T-mobile or HTC were helpful.
FYI, I have tested it on some other phones:
Samsung Galaxy S (T-mobile) not rooted stock 2.1 shows "Forwaded Call" in a separate green window, only briefely then goes out while showing the caller number.
Other older phones like Nokia E71 also show a broken arrow for forwarded calls.
Nexus S (that is made by Samsung) stock 2.21 and some blackberries I tested did not show.
I am a newbie and so far I have found out that this function is part of the "telephony" that supposedly the manufacturer puts on the phone.
There are Several other treads in this forum under Diverted or forwarded calls, mostly asking for help. One had a reference to Windows Mobile that supposedly works but it's no help for the android.
Regards
Warren

why cannot display the caller ID?

why cannot display the caller ID?
I am with fido,after i changed to X1,the caller id display function didn't work.It was working well with my old cells.
Fido told me that service is no problem,but depends on the cell device.
Sony told me should be ok,but no solution to resolve the problem.
Help...
thats weird because i'm on fido and caller id works on mine. Try to see if you can get the caller id without the name display. I'm typing on the xperia btw!

Categories

Resources