Database Users

Exec MMS

does anyone know how to set up the Eec with Orange mms Settings?
i cant get any picture messages from anybody without this and its doing my head in trying.
if someone couild tell m e this then i would be much obliged

Note: Orange must enable MMS for your account. Contact Orange Customer Services
Access Point Name: orangemms
Username: Orange
Password: Multimedia
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 192.168.224.10
Port: 8080
Session mode: Permanent
MMS Message (Relay) Server URL http://mms.orange.co.uk/

and where par sey do i put these , when i put them in MMS configeration it just shows me the message , but when it connects to orangeinternet (The GPRS) setting it wont download the pic

Start - Settings - Connections tab - Connections - "Manage existing Connections" (under my work network) - New
Connection name: orangemms
select a modem: celular line (GPRS, 3G)
(next)
Access point name: orangemss
(next)
user name: Orange
Password: Multimedia
(finish)
choose the orangemms radio button click OK.
Start - Messaging - Menu - MMS Configuration - Servers tab - new
server name: orangemms
Gateway: 192.168.224.110
Port Number: 9201
Server Address: http://mms.orange.co.uk:8080
Connect via: My Work Network
Sending size: 100k
Wap version: wap 1.2
click OK
select orangemms and click Set As Default
click OK
Switch to your MMS account, open a message stub, menu - download.
These settings worked for retrieving but I havent tried to send yet.
Good luck,
Andy

Thanks for that full explanation, I couldnt quite remember how I did it and im very busy at the moment.
Anyway, I hope between the messages its clear now?
Thanks again for filling in the blanks.

Issue sending and receiving MMS messages

Hey everyone!
Tearing out my hair with this one! No probs with GPRS or browsing the Web, using push email functions etc.
BUT MMS just wont work! Am on O2 and using the following settings found under the MMS Configuration menu:
Server: O2UK
Gateway: 193.113.200.195
Port: 8080
Server Address: http://mmsc.mms.o2.co.uk:8002
Connect Via: My Work Network (the default i use for browsing the web, etc)
Sending Size: 100k
Wap Version: 2.0
Have checked with O2 that MMS is enabled on the sim and it is (have checked with them twice now).
When i go to send a MMS messsage, it says sending but then comes back and says one of 2 things, either:
User Barred
Or
Cannot send message will remain in Outbox
GPRS seems to activate when i hit the send button. I have even tried connecting to the web first. any ideas? going mad!
It won't recieve whatsoever it will just have a text message saying "youve been sent a text message log on to o2.co.uk to view".
My wizard is a O2 XDA Mini - S, Rom is an Imate K-Jam ver 2.16.9.1 WWE dated 2/6/06
Hope you can help!

The normal O2 settings have two connections, one for general browsing(My ISP) and one for wap(My Work Network). MMS uses the 2nd.

sorry Kevino, not sure what you mean?

Under settings->Connections->Connections. O2 adds a connection under each of "My ISP" and "My Work Network".
Sorry I do not have the wap connection detail as I deleted it. Try a search for "O2 GPRS settings" and when you find a list you will see what I mean.

These are the only settings i can find, do you mean that MMS should be sent by dialup connection kevino?
O2 WAP settings (dialup):
Homepage: http://wap.o2.co.uk/
Dialup number: +447712 927927
Gateway (IP) address: 193.113.200.195
Username: o2wap
Password: password
Session type: Continuous / permanent
Port number: 8080 (or try 9201)
Authentication: Normal
Old o2/Genie shortcode WAP number was: 915000
O2 WAP settings (GPRS):
Note: Different settings for contract and PAYG (Pay as you go)
Homepage: http://wap.o2.co.uk/
APN address (contract): wap.o2.co.uk
APN address (PAYG): payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : o2wap (contract) / payandgo (PAYG)
Password: password
Session type: Continuous / permanent
HTTP Proxy: 193.113.200.195
Port number: 8080
Authentication: Normal
These are the onle settings i can find, do you mean that MMS should be sent by dialup connection kevino?

These are the only settings i can find, do you mean that MMS should be sent by dialup connection kevino?
O2 WAP settings (dialup):
Homepage: http://wap.o2.co.uk/
Dialup number: +447712 927927
Gateway (IP) address: 193.113.200.195
Username: o2wap
Password: password
Session type: Continuous / permanent
Port number: 8080 (or try 9201)
Authentication: Normal
Old o2/Genie shortcode WAP number was: 915000
O2 WAP settings (GPRS):
Note: Different settings for contract and PAYG (Pay as you go)
Homepage: http://wap.o2.co.uk/
APN address (contract): wap.o2.co.uk
APN address (PAYG): payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : o2wap (contract) / payandgo (PAYG)
Password: password
Session type: Continuous / permanent
HTTP Proxy: 193.113.200.195
Port number: 8080
Authentication: Normal
These are the onle settings i can find, do you mean that MMS should be sent by dialup connection kevino?

I think i may have found the problem guys! I'll keep you updated.....
I kept getting a message saying "Error - User Barred" everytime i was sending MMS. Found a site where a few guys had the same problem and found out the solution.
Basically have to call O2 and ask them to confirm with their Data Services team that MMS is enabled on all their systems as opposed to just the primary system. Replication seems to be an issue they suffer from.
Original article: http://www.esato.com/archive/t.php/t-50035
Will keep you posted they have had to replicate it manually and it may take up to Friday!
Wish me luck

Well I hope that's your problem. But look at
http://forum.xda-developers.com/viewtopic.php?t=50477&highlight=o2+gprs+settings
to see what I was trying to explain. Ah just noticed it appears different for payg (you do not say what you have)
http://forum.xda-developers.com/viewtopic.php?t=13861&highlight=

CYTA (Cyprus) MMS Settings

MMS options
Servers
server name: cytamobile
gateway: 212.31.96.161
port number: 9201
server address: http://mmsc.cyta.com.cy
connect via my isp
settings
connections
connections
my isp
new isp
name: mms gprs
modem: cellular line (GPRS, 3G)
access point name: cytamobile
usename: user
password: pass
if it doesn't work then
do all of the above +
advanced
server
use specific server address: 195.14.130.186

Australia Vodafone - "the remote party has ended the connection"

Need some help with setting up Vodafone GPRS on my Touch.
I am with Rewards Mobile who resells Vodafone services, and had been able to obtain GPRS settings from Vodafone. However everytime I attempt to connect I get the following error bubble:
"The remote party has ended the connection"
My settings are as follow:
Device:
HTC Touch (Elfin)
Rom: Onyx 3.0(patch 1) - 2.27.80.1 WWE
Radio: 3.21.90
GPRS:
Settings -> Connections -> Connections
Modem:
Name: Vodafone Internet
Modem: Cellular Line (GPRS)
Access Point: vfinternet.au
Username/password/domain: Blank
Proxy:
HTTP: blank
WAP: 10.202.2.60:9201
Secure WAP: Blank
Socks: 10.202.2.060:1080
MMS:
Name: Vodafone MMS
Modem: Cellular Line (GPRS)
Access Point: live.vodafone.com
Username/password/domain: Blank
Proxy:
HTTP: 10.202.2.60:8080
WAP: Blank
Secure WAP: Blank
Socks: Blank
GPRS Authenication: PAP
Can anyone spot any problem with my settings?
Or anyone had this problem before an have a solution?

vincentc said:
GPRS:
Settings -> Connections -> Connections
Modem:
Name: Vodafone Internet
Modem: Cellular Line (GPRS)
Access Point: vfinternet.au
Username/password/domain: Blank
Proxy:
HTTP: blank
WAP: 10.202.2.60:9201
Secure WAP: Blank
Socks: 10.202.2.060:1080
GPRS Authenication: PAP
Click to expand...
Click to collapse
Hi, My vodafone settings look the same except for the WAP/Socks. Are you entering these via the advanced setting under the TCP and server settings? As I do not have any entries against these IP address - I just use the server assigned IP address.
Michael

Lynehammike said:
Hi, My vodafone settings look the same except for the WAP/Socks. Are you entering these via the advanced setting under the TCP and server settings? As I do not have any entries against these IP address - I just use the server assigned IP address.
Michael
Click to expand...
Click to collapse
I removed them and soft reset, didn't make any difference.

NZ 2 degrees mobile internet

I'm trying to configure my blackstone for mobile internet use on the 2 degrees network in New Zealand. The 2 degrees website gives the following config info:
WAP Gateway Settings
WAP gateway IP: 118.148.1.118
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
Homepage: http://m.2degreesmobile.co.nz/
APN: 2degrees
MMS Settings
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
WAP gateway IP: 118.148.1.118
Homepage: http://mms.2degreesmobile.net.nz:48090
APN: mms
Internet Settings
Homepage: http://m.2degreesmobile.co.nz/
APN: internet
Going through Start > Settings > Connections > Connections > Add
I entered http://m.2degreesmobile.co.nz/ into the Access Point Name field and proceeded to completion (leaving the Username and Password fields empty).
Unfortunately when trying to connect to the internet I get a 'can not connect for an unknown reason' error.
I can't see anywhere to configure WAP or MMS but I don't believe it's this that is preventing me from access the internet.
If anyone has any suggestions on how to get it working................

oh very useful thank you very much
i used 2degree too with HTC Desire

try that
I'm using two degrees in nz and the olly settings are:
in connection type use "cellular line 3G"
for the access point "internet"
QUOTE=Karearea;4795184]I'm trying to configure my blackstone for mobile internet use on the 2 degrees network in New Zealand. The 2 degrees website gives the following config info:
WAP Gateway Settings
WAP gateway IP: 1i18.148.1.118
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
Homepage: http://m.2degreesmobile.co.nz/
APN: 2degrees
MMS Settings
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
WAP gateway IP: 118.148.1.118
Homepage: http://mms.2degreesmobile.net.nz:48090
APN: mms
Internet Settings
Homepage: http://m.2degreesmobile.co.nz/
APN: internet
Going through Start > Settings > Connections > Connections > Add
I entered http://m.2degreesmobile.co.nz/ into the Access Point Name field and proceeded to completion (leaving the Username and Password fields empty).
Unfortunately when trying to connect to the internet I get a 'can not connect for an unknown reason' error.
I can't see anywhere to configure WAP or MMS but I don't believe it's this that is preventing me from access the internet.
If anyone has any suggestions on how to get it working................[/QUOTE]

no doubt you have solved this problem already but for anyone who hasn't, 2degrees website is very helpful and there is a section were you write in your phone number and some other details and they send you a bunch of txt msgs containing updates and settings changes that will fix the 3g problems.