Artemis Problem - P3300, MDA Compact III upgrading etc.

I flashed my device with the original Rom from HTC (which I downloaded at the xda-developers page) and since this "upgrade" I can't flash my device with any other roms, whenever I try it shows me new problems why it doesn't work.
another problem is that the Wi-fi of my device doesn't work since the last flash. the today theme shows me just the date even though i clicked in the settings to show me everyting apart of the date.
any help? i would be really thankful.
thanks in advance.

try a reflash it might work
good luck

sheennick123456 said:
try a reflash it might work
good luck
Click to expand...
Click to collapse
Hehe very funny answer First Line: "since this "upgrade" I can't flash my device with any other roms" ...
What Errors do occur? Ran USPL before trying to flash new ROM? Make sure the Active Sync Connection is established in case there are connection problems.
Edit: Now i think maybe sheennick meant trying to reflash the same ROM you flashed last, the HTC ROM, maybe you can flash this one once more.
Sorry sheennick if you meant this

Related

Help with my Bricked 8125

I think my 8125 is bricked. I've never had a problem flashing roms until yesterday I tried Farias Kitchen ROM. I flashing went through ok like normal, but when it restarted, it gets a little bit after the second splash screen. The green windows mobile with farias names at the bottom loads, then the topbar of windows mobile loads with the start button, but then nothing else.
I've tried reflashing it in forced bootload mode as well as doing a hard reset. no luck. The update utility keeps telling me that it is an invalid update tool, please get a newer update utility. I've tried taking the battery out for a while and from there doing forced bootloader. Still no luck
Any suggestions?
daddy_yankee1980 said:
I think my 8125 is bricked. I've never had a problem flashing roms until yesterday I tried Farias Kitchen ROM. I flashing went through ok like normal, but when it restarted, it gets a little bit after the second splash screen. The green windows mobile with farias names at the bottom loads, then the topbar of windows mobile loads with the start button, but then nothing else.
I've tried reflashing it in forced bootload mode as well as doing a hard reset. no luck. The update utility keeps telling me that it is an invalid update tool, please get a newer update utility. I've tried taking the battery out for a while and from there doing forced bootloader. Still no luck
Any suggestions?
Click to expand...
Click to collapse
What are you trying to re-flash it with in the BL?
You should be able to flash the loverom without a problem.
TaurusBullba said:
What are you trying to re-flash it with in the BL?
You should be able to flash the loverom without a problem.
Click to expand...
Click to collapse
Thanks, I'm gonna download it right now and try it. What is different about this ROM than any of the cooked roms I have already as well as and official one. All of them in past have worked for me without a problem until now.
daddy_yankee1980 said:
Thanks, I'm gonna download it right now and try it. What is different about this ROM than any of the cooked roms I have already as well as and official one. All of them in past have worked for me without a problem until now.
Click to expand...
Click to collapse
Well, it sounds like it may have just been a bad casserole you cooked.
But, you could probably even re-flash using your carrier ROM. This one is just a fool-proof way to get you back on your feet. This ROM is just G3/G4 independent and doesn't include a radio, ipl/spl, or extrom.
TaurusBullba said:
Well, it sounds like it may have just been a bad casserole you cooked.
But, you could probably even re-flash using your carrier ROM. This one is just a fool-proof way to get you back on your feet. This ROM is just G3/G4 independent and doesn't include a radio, ipl/spl, or extrom.
Click to expand...
Click to collapse
Nope, just tried flashing that ROM mentioned above, and still the same answer. It keeps telling me that I need to get a new update utility. That is so weird because I never had that problem. I have already tried flashing the official as well with no luck.
daddy_yankee1980 said:
Nope, just tried flashing that ROM mentioned above, and still the same answer. It keeps telling me that I need to get a new update utility. That is so weird because I never had that problem. I have already tried flashing the official as well with no luck.
Click to expand...
Click to collapse
So, how exactly are you updating it in the bootloader? (just curious)
TaurusBullba said:
So, how exactly are you updating it in the bootloader? (just curious)
Click to expand...
Click to collapse
I put the phone in bootload mode by pressing and holding the camera button, then resetting by pushing the reset hole which then loads it to a colorful screen which I assume is the bootloader screen. Then I just connect it and try to flash it using one of the ROMS i have. Thats how I did it the past couple of times.
What upgrade utility are you using? You might wanna try the one attached! It is the 'NO_ID' version and up to now it flashed everything! Simply extract the zip file to a folder on your desktop, then copy your nbf file in to it too and run the "ROMUpdateUtility_Wizard_NoID.exe"
hello
im having the same problem, i just tried it, didnt work for me
Did you CID unlock your phone before trying to flash it? Did you also try to flash it with your shipped ROM again?
My phone also appears to be bricked. It locked at 99%, and after trying the steps indicated in the core2.0 installer, it closed, and I'm having difficulty figuring out the next step. As is, I get ERROR [264] CONNECTION. Is there a way to get the phone functional enough to load an OS? I've been searching these forums for about 30 minutes and haven't found what I'm looking for. There should be a recovery wiki.
I have the same problem...
Junner2003 said:
Did you CID unlock your phone before trying to flash it? Did you also try to flash it with your shipped ROM again?
Click to expand...
Click to collapse
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
alissonguedes said:
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
Click to expand...
Click to collapse
First thing you could try is to flash it with your shipped ROM again (the one you had on there originally). If that does not work you might want to search the forum for the LOVE ROM ??? I never tried that one but people say it should worke on any device (G3 /G4).
I thing more
alissonguedes said:
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
Click to expand...
Click to collapse
Every rom that i put in the phone is the same...always freeze on the splash screen...
Junner2003 said:
First thing you could try is to flash it with your shipped ROM again (the one you had on there originally). If that does not work you might want to search the forum for the LOVE ROM ??? I never tried that one but people say it should worke on any device (G3 /G4).
Click to expand...
Click to collapse
I try LOVE too and nothing...the phone is G3 with ipl/spl 1.01
alissonguedes said:
I try LOVE too and nothing...the phone is G3 with ipl/spl 1.01
Click to expand...
Click to collapse
Did you try already to flash your shipped ROM?
I dont have one
Junner2003 said:
Did you try already to flash your shipped ROM?
Click to expand...
Click to collapse
I dont have one...
You can download the Official ROM directly from HTC's site.
alissonguedes said:
I dont have one...
Click to expand...
Click to collapse
Yeah, download that one if Cingular was the original one! If not: let me know what was on there originally!
Junner2003 said:
Yeah, download that one if Cingular was the original one! If not: let me know what was on there originally!
Click to expand...
Click to collapse
A mda vario tmobile from germany...

Error 270

I really hate to make a bad first impression but...
No matter what I do I get this error. I was trying to HARDSPL the phone, I put it into boot loader mode, I installed all the .cab's . It starts the progress bar up gets to about 3% and the phone screen goes black and restarts and then ERROR 270 shows up in the RUU. I searched around but found nothing for the Herald about it. Just asking for any help as to what I can do.
Thank you in advance.
diacronic said:
I really hate to make a bad first impression but...
No matter what I do I get this error. I was trying to HARDSPL the phone, I put it into boot loader mode, I installed all the .cab's . It starts the progress bar up gets to about 3% and the phone screen goes black and restarts and then ERROR 270 shows up in the RUU. I searched around but found nothing for the Herald about it. Just asking for any help as to what I can do.
Thank you in advance.
Click to expand...
Click to collapse
Have you tried going to start/system/usb to pc and enable advanced network functionality? What rom are you running?
dougstoner said:
Have you tried going to start/system/usb to pc and enable advanced network functionality? What rom are you running?
Click to expand...
Click to collapse
ok that was disabled. I enabled it, same problem.
Seems to be running Open Touch 5.0.
Just bought it off ebay.
Ok think I got it. Seems to be very hard to find a newbie guide for first timers of this sort of thing.
Found some files by ivanmmj and sifted through them. Found a USPL program that SID unlocked the phone, after that I was able to run HARD SPL, and everything was fine. Now my next step is to try to flash a ROM on it , wish me luck.
Think after all this work I'm going to try to write a guide for first timers like me to explain this stuff a little better.
If it had OpenTouch 5.0, it might have already been HardSPLed. Either way, I'm glad you found the answer yourself. It shows that you actually did your research.
diacronic said:
Ok think I got it. Seems to be very hard to find a newbie guide for first timers of this sort of thing.
Found some files by ivanmmj and sifted through them. Found a USPL program that SID unlocked the phone, after that I was able to run HARD SPL, and everything was fine. Now my next step is to try to flash a ROM on it , wish me luck.
Think after all this work I'm going to try to write a guide for first timers like me to explain this stuff a little better.
Click to expand...
Click to collapse
That's really not a bad idea. I know I was EXTREMELY confused the first time I flashed my rom. It took me a lot of reading to finally understand RUU stood for rom update utility. You do know for some roms, it's not necessary to hard spl. I went from stock rom to open touch 3.0. What rom are you thinking about flashing to?
There's a walkthrough by me somewhere in the forums.
dougstoner said:
.... I went from stock rom to open touch 3.0. What rom are you thinking about flashing to?
Click to expand...
Click to collapse
Just downloaded ivan's kitchen , but I'm having problems getting it to run. Going to use that to probably make my own and get used to the programs that are out there.

HELP! hd2 doesnt boot anymore, stays on white htc logo

hi
ive installed spl 2.08
then i installed the rom called hd20 which was working pretty good . after one month it didnt work well and i removed the bettery, now it doesnt boot anymore.
tried to install a rom via sdcard on the colour screen. ive tried it with artemis and a custom rom....... no reactions
please i need help
my bootloader
View attachment 342241
pls help
what radio are you using?
i did not install any radio extra i thought it was included in the hd20 rom
gmhanno said:
i did not install any radio extra i thought it was included in the hd20 rom
Click to expand...
Click to collapse
unless the artemis rom is different, you need to flash a radio, check out the didicated thread in "rom dev" and see what they reccomend
ok i think your right! it says to install a radio which i didnt
but it worked well for one month
is my phone now broken and did i lose my warrenty
gmhanno said:
ok i think your right! it says to install a radio which i didnt
but it worked well for one month
is my phone now broken and did i lose my warrenty
Click to expand...
Click to collapse
if you get it into bootloader is shuold say connected by USB in this case you can still flash the radio in the exact same way you flashed the rom.
in regards to warranty, flashing custom roms does void warranty but its not the be all of end all, you can flash back to stock but thats something you will need to read about as its quite a lengthy explenation.
which rom and which radio should i use now to get my phone working again
ok i understand ! thanks
im woking with xp, and i flashed my phone with a vista pc
is there a chance to do that with my xp?
with xp you use ActiveSync and vista its Windows Mobile Device Center but the whole flashing process is the same
omg dammed your right my phone is reakting with active sync to usb woooooww thanks a lot , will try now
ok thank you , it worked i installed a stock rom . do you think i should install a custom rom again or what do you say
gmhanno said:
ok thank you , it worked i installed a stock rom . do you think i should install a custom rom again or what do you say
Click to expand...
Click to collapse
yeah, by all means do a custom rom, they may seem quite daunting and we all make **** ups but once you've done it once or twice its a piece of cake.
check my sig, read through the help threads and you shuold be ok.
when installing a custom rom always check the Required HSPL and Radios, I have made that mistake before. Once you know what you are doing flashing is a breeze.
thanks for helping
now there is another problem!
i installed goatrip and everything worked as it should
then ....
after a freeze with the massage low battery my phone didnt react anymore so i took out battery.
but then ......... it is not reacting at all, it is switched of i cant turn it on
i hope that maybe the battery is broken
but warrenty is lost
somebody can help?
or should i just find a mobileshop who can tell me whats wrong with my hardware
I'm guessing you've tried that, but just in case (since your message doesn't say you did) : have you tried charging the phone for a while and turning it on again (even while connected to the charger)?
If you did try that, you might want to try with another battery, but it would be better if you had a friend with a HD2 to try with his battery before buying a new one.
If you still get nothing, then you'll probably have to send it for repairs..
gmhanno said:
thanks for helping
now there is another problem!
i installed goatrip and everything worked as it should
then ....
after a freeze with the massage low battery my phone didnt react anymore so i took out battery.
but then ......... it is not reacting at all, it is switched of i cant turn it on
i hope that maybe the battery is broken
but warrenty is lost
somebody can help?
Click to expand...
Click to collapse
yes i have tried that
but nothing happened ,
normally when you charge the orange light is shining
lucky i have a friend with a hd2, i hop it will be the battery or charger
but if not should i send it to htc or to sombodyelse, beause they will properbly send it back whitout even putting a hand on my phone????
gmhanno said:
yes i have tried that
but nothing happened ,
normally when you charge the orange light is shining
lucky i have a friend with a hd2, i hop it will be the battery or charger
but if not should i send it to htc or to sombodyelse, beause they will properbly send it back whitout even putting a hand on my phone????
Click to expand...
Click to collapse
Well I'm not sure you have another choice but send it to HTC unfortunately.
You just have to hope they can't turn it on either and send you a replacement under warranty, because if they turn it on and see you've installed HSPL and a custom ROM, you'll probably have to pay for the repairs.
has anybody experiance with that?
how hoch will they offer
but what i cant understand.... can a software damage the hardware of the hd2?

In need of really good help! - Restore to original ROM

Hi there!
I've been searching and looking for any other posts with the problem I have. And I've come up with nothing..
This is my situation; Rooted my HTC Hero (EU) and flashed Eclair Vanilla 4.0 just days before the release of the original update from HTC.. Wanted to go back to the original ROM, followed the instructions and this is where it all breaks down.
It doesn't work and now I've lost the Amon RA bootloader and I can't boot it up, all though the Eclair Vanilla boots up if you boot the phone. Recovery boot doesn't work, been trying with several methods i.e. Goldcard method.. But no luck. And I've even tried the RUU program and it didn't find the connection on the USB but when I boot the phone in to Fastboot it can find it :/
And now I'm hoping that someone here on XDA could help me, since users on Swedroid forums doesn't know how to answer a post.
I'd really like to have some help, thankfull for every advice and I really hope I can fix this since the Eclair Vanilla 4.0 ROM really sucks and drains my battery.
Sincerely yours
Andreas
Download ROM Manager from the market made by Koush, open the app and flash his recovery image. Once this is done, re-open the app, scroll down and click the flash alternate recovery image (Amon_Ra-v1.6.2). It happened to me not long ago to lose my recovery image and I did this and it all worked ok!
As for returning to the original ROM well sorry bud but I can't help you with that!
Hope this helps!
Cheers
Okay, the only one I found was from some ClockworkMod guessing that would work too.. Imma try that one out
If you want to go back to unrooted ROM. I think this should work.
- Download the appropriate (EU) RUU ROM
- connect your phone to your PC
- flash the official ROM from your PC
That didn't work since it didn't find the USB Connection, but the ROM Manager did work! And I'm flashing HTC_HERO_WWE now.. Thank you sooo much kukussi! You made my life so much easier now!
addestyle said:
That didn't work since it didn't find the USB Connection
Click to expand...
Click to collapse
In Device Manager, right-click on HTC Bootloader, Update Driver..., Search on Hard Disk, and choose "My HTC".
RUU will now recognize the phone
no problem!
addestyle said:
That didn't work since it didn't find the USB Connection, but the ROM Manager did work! And I'm flashing HTC_HERO_WWE now.. Thank you sooo much kukussi! You made my life so much easier now!
Click to expand...
Click to collapse
Glad I could help bud! Enjoy your phone!
Cheers

[ROM]RUU_Mozart_TMO_DE_1.20.111.03_Radio_5.50.09.18_22. 24.50.09U, by ansar

Hi,
A new ROM for the TMO_DE operator:
RUU_Mozart_TMO_DE_1.20.111.03_Radio_5.50.09.18_22.24.50.09U_by_ansar
just in case you need to comeback to this branded ROM for any reason
see also thread: Windows Phone 7 Branded ROMs for Mozart
Till next version enjoy!!!
Regards, ansar
i have problems with my phone not booting past the white screen
i tried a hard reset with no luck
i want to flash my phone with default firmware
Its a mozart from tMo-de, unlocked from the store
my questions are : i want to make sure that it will not ask the unlock code once im done
or can i flash a unbranded rom on this phone?
i found this rom
i need it NOT to be Nodo, which version is this one?
mariu$ said:
i have problems with my phone not booting past the white screen
i tried a hard reset with no luck
i want to flash my phone with default firmware
Its a mozart from tMo-de, unlocked from the store
my questions are : i want to make sure that it will not ask the unlock code once im done
or can i flash a unbranded rom on this phone?
i found this rom
i need it NOT to be Nodo, which version is this one?
Click to expand...
Click to collapse
Hi,
This ROM is NoN NoDo and will not ask unlock code after flashing
How did you manage to boot only at splash?
I hope it is not a bad Storage Card issue
Regards, ansar
i forgot to say that this problem came up when using zune update
i came to this rom to see if i can correct the problem
looks like many tmobile de phones have this problem, took my second one and also got stuck at the white boot up screen after update, proably the only way to upgrade is using romupdateutility, impossible with zune
recovered using restore point
im trying romupdateutiliy now but it says that rapitool closed
tried restart and different usb port and the same problem comes up
it says to check the usb connection but im sure its ok, and its on bootloader
dont know what to do
anyways im trying to flash 1.28
installed wm device center and its working
victory
mariu$ said:
i forgot to say that this problem came up when using zune update
i came to this rom to see if i can correct the problem
looks like many tmobile de phones have this problem, took my second one and also got stuck at the white boot up screen after update, proably the only way to upgrade is using romupdateutility, impossible with zune
recovered using restore point
im trying romupdateutiliy now but it says that rapitool closed
tried restart and different usb port and the same problem comes up
it says to check the usb connection but im sure its ok, and its on bootloader
dont know what to do
anyways im trying to flash 1.28
installed wm device center and its working
victory
Click to expand...
Click to collapse
Hi,
Glad you fix it!!
Regards, ansar

Categories

Resources