After I install SPB Suite and any JPLDialer skin, SPB call filter stops working. It either starts to accept all calls or block all calls. It works fine after I remove the skin. By the way, it does the same thing with CallFirewall 1.2
Did anybody else have this problem ? Is there a fix ?
Related
Hello all,
I did some searching and haven't really been able to find an answer so far. I am using the eten skin with smartdialer with the black glass blue skin. The problem is that all of the buttons have a gray shadow behind them. What's even more funny is the "History" button has a shadow behind it that says "Call History" and they don't seem to match up at all. Overall, none of the buttons are aligned correctly. Does anyone else have this problem and have you found a workaround?
I have attached a screen shot of what I'm talking about
First and foremost the Eten dialer program doesn't seem to work properly with smartdialing. It takes up too much space in the upper portion and causes the replacement of some of graphics like you are seeing.
Second you are using a skin pack on top using the Eten dialer. The Eten dialer replaces almost all of the phone program graphics, then you have replaced them again. The Eten dialer does not put the graphics in the same place as the original dialer program, so things aren't aligned properly with the text.
There's a (hacked?) version of Eten that supports smart dialing.
Unfortunately I'm also suffering from the same problem. WarlockLord, were you using any of paulyA's skins before this? The text looks like "legacy text" from his classic skins. I was using the original Eten dialer with the famous orange skin before this.
I'll post again if I find a solution to this...
I use the E-Ten dialer with smartdialing for over a week now on my Wizard.
(Pauly A) Said that it has some bugs and that it is a beta version, I didn't find or noticed ANY bugs!
It works just perfect on my device (with the standard blue skin).
Screw the original dialer.....E-Ten dialer for life
The problem with th e*Beta* version of the Eten dialler is that, even though the original (non-SD) version used 'drawn' buttons, the new version uses a comination of the two, the number pad is 'drawn' while the in-call pad seems to require system fonts, the PaulyA versions of skins have drawn buttons in both version... there are versions of the Eten Dialler with SD support that use drawn or system buttons here, and also a landscape skin, however I find either one has the same issues on the in-call pad!! Others seem to have had success though...
Has anyone had a problem with the Eten dialer and SPB Pocket Plus?
Every time I have them both installed, once I reboot, my device gets hung on the Windows boot screen. Any ideas?
yes I have the same problem with spb pocket plus!
First I installed pocket plus 3.0 and afterwards the E-Ten Dialer, then I tried it the other way round: first Eten Dialer, then SPB Pocket Plus...same result:
It hangs up in the windows mobile startup-screen.
is it possible to make the phone vibrate when a call gets connected so i dont have too keep the phone on my ear or look at it while the phone is dialing. i belive the touch pro has thah feature.
Inesoft Dialer comes with this feature. Free trial.
this feature is existed by a program which is called: Inesoft
it's a great application with a lot of options
check their website
http://www.inesoft.com/eng/index.php?in=phone.html
slide2unlock s2u2 has this featue and is free
search S2U2
Is there a large dialpad similar to idialer but with smart dial (so spelling out a contacts name will bring up their number) ? or even a way to enable smart dial?
iDialer here:
http://forum.xda-developers.com/showthread.php?p=2694308
or something similar to the minimal dialer here:
http://handheld.softpedia.com/get/Skins/Minimal-Dialer-64089.shtml
but doesnt use the diamond phone canvas as a base (because of the issues with wm6.5 & the just stupid amount of ram the diamond phone canvas uses)
currently i'm using the gorgeous Ryon dialer skin here:
http://forum.xda-developers.com/showthread.php?t=508920
but the buttons are to small
Anyone know what dialer this is and where to get it?
http://forum.xda-developers.com/showpost.php?p=1336681&postcount=41
Seems to be what i'm looking for
looks like an old version of inesoft try here
http://www.inesoft.com/eng/index.php?in=phone.html
You can try Yota Dialer (search here), except it's a little buggy for me.
thanks for replies guys but Innosoft doesn't seem to have smart dial otherwise was good and ya yota is just a bit too buggy (not to mention it takes up as much space as the regular htc dialer)
anyone else have suggestions on a large button dialer with smart dial?
averma said:
anyone else have suggestions on a large button dialer with smart dial?
Click to expand...
Click to collapse
There isn't one really.
I've been looking for the same solution for a while.
Put a request for a developer here instead. I'll put my hand in for the graphics.
iconsoft phonex has smart dialing and a large keypad, I think the latest version uses a lot less ram too a simple dialpad similar to that would be great to replace the small wm dialer
Maybe o3touch brings what you want? See http://www.o3touch.com/
phonex is not bad but when receiving it interferes with the windows 6.5 lock screen, otherwise it was actually pretty good, had smart dial n everything
o3touch seems to be a keyboard not a dialer so cant really comment on that
i came across a really good 1 but its incomplete, its here:
http://forum.xda-developers.com/showthread.php?t=437296
its a VGA touchflo 2d dialer, the dial screen is perfect with smart dial and good buttons, as well the incall screen works great.
forgot to test out how it works with an incoming call and the wm6.5 lock screen (though it probably wont work that well)
but the big killer for this is that its not finished and in wm 6.5 when using smart dial the contacts all wash into eachother and become unreadable (the names will just constantly overlap eachother so its unreadable)
anyone know of a dialer similar to this but JUST the dialer, the incall screen is nice but not a big deal but any kind of custom incoming call screen will just screw with the wm6.5 lock screen
i've seen a boat loads of dialers for qvga (minimal dialer being really good) so their has to be something similar for VGA, or if their are any developers who could make 1 for 6.5
its the same dialer as 6.1 but because the lock screen already has slide to answer built in and an incall screen built in we only need to skin the actually dialer itself
and of course if anyone has a dialer they really like please share
Hi Guys
I am using Iconsoft Phonex as my dialer. Its a super dialer. My problem is it doesnot integrate with the People tab provided on Touch flo. Clicking on the call button in the people tab doesnot initiate a call. It appears to become a dummy if i have Phonex running. I think it is because TF3D doesnt know it needs to use Phonex dialer to initiate the call. I am sure there is some registry key i need to modify to get this working.
Anybody aware of this? Any known fixes available? This would make my phone perfect!
I am on Dutty 3.3 XT ROM.
cheers
Raz
I'm usingthe stock ROM, PhonEx 1.4 and what you're describing works OK for me. Trying my home landline from TF3D/ People dials home and goes straight into the PhonEx dialling screen. I know that this is no consolation to you at the moment but I would try a complete uninstall and reinstall. HTH.
micken thanks for the reply. I just did an uninstall, reset, reinstall reset... still the same problem... maybe its the rom version i use? i never tried it with the stock rom i had.
its such an annoyance!
One thing.. when you disable phonex, do you get the standard wm dialer working in all its glory? For me the dialer comes back but i cant see the call list in the dialer.. its all blank, though i can dial and make calls and even scroll down the blank list!
i have same problem
If I choose to install SPB mobile shell 3.5, and not sense, will the WM6.5 dialer (or whatever 3rd party dialer I'll use) know to use the proximity sensor when I have a phone call ?
If you have tried yourself please let us all know if it works or not.
I don't have the HD2.
Anyone who have it can test it. Just disable SENSE, then try to make a phone call (the device will use the orginial WM6.5 dialer) and see if the screen goes off when you take it to your ear.
Was in a could mood so i decided to test it for you. I check windows standard (titanium) in the today settings and made a call (get the same dialer as i get when i use htc sense and the screen goes black when i put it to my ear. So i guess it will work with spb mobile shell.