Related
Just a warning for anybody with a Jam or any mobile PDA..
Do NOT install wisbar advance, it's one of the most popular pocket PC programs, but it actually stops the phone from ringing after a few minutes and you cannot receive incoming calls.
They are currently developing a new version especially for mobile PDA's.
Just thought id let you know as it caused me a lot of problems until I found it was wisbar causing the problem.
Only the phone edition of wisbar, in alpha stage, has this problem. :wink:
Hi Jacoch, that is incorrect.
The mobile edition is being developed because of the problem with wisbar advance on mobile PDA devices.
Wisbar advance was meant for PDA not PDA running windows mobile.
I purchased wisbar 2 and it had that problem.
Wisbar mobile edition has lots of problems too as its in alpha.
If you have a jam, feel free to install wisbar advance 2 and open then phone app, and make a call, then try to receive one your phone simply wont ring.
it not happen with standard Phone program & happen with some Phone Extra program (like Intelli Dialer....)
I noticed the same.. I've tried Wisbar Advance 2.0.1.9 on my T-Mobile MDA Compact (without any of the extended rom stuff like intellidialer installed) and it won't ring while running wisbar.. The phone will turn itself on upon receiving a call but there is no ringtone and the phone application doesn't show..
I noticed the same.. I've tried Wisbar Advance 2.0.1.9 on my T-Mobile MDA Compact (without any of the extended rom stuff like intellidialer installed) and it won't ring while running wisbar.. The phone will turn itself on upon receiving a call but there is no ringtone and the phone application doesn't show..
Click to expand...
Click to collapse
Exactly the same with mine.
The creator of the wisbar 2 is aware of the problem and thus created the mobile edition.
Its obvious really that it would cause problems, because it wasnt created with phone calls in mind.
It will run perfectly on a normal pocket pc
hey guys i am usin xda II installed wisbar advance only caz i wanted to use the aqua mac theme ne ways...was very disappointed to find out that it doesnt ring and blah blah.....but last nite what happed was i left my xda II running in wisbar mode and the phone was locked and guess what in the morning it started ringing it self when i got up it was askin me for a password as it gets locked after 5 mins and by the time i unlocked it call was cancelled and i could see the miss call on top.... and the thing was actually ringing for a surprise.... !!
regards
jeetz
I use IcBar (it is based on wisbar api). I think it creats some of delay when someone calls me.
am I wrong??
UPDATE:
Chris over at wisbar has now released a beta version that is very stable and the phone rings, you must download the beta version from the forums. Make sure you choose the WM2003 SE download.
Along with Pocket Plus it's the best program for pocket PC. I love it.
I purchased SWdeluxe theme, expensive but wow my phone looks simply amazing!!
ok its just damn great...... !! awesome news.... !! buuuuuuuuuuuuuuuuuut... it has some minor graphic issues....BUTTTTTTT i dont mind that as long as i can use my aqua mac theme along with my xda II RINGING !!!
zairyaab said:
ok its just damn great...... !! awesome news.... !! buuuuuuuuuuuuuuuuuut... it has some minor graphic issues....BUTTTTTTT i dont mind that as long as i can use my aqua mac theme along with my xda II RINGING !!!
Click to expand...
Click to collapse
i change ma words.......would rather wait for a official release this one has loaaaaaaddddddddz of BUGGGGGSS !! majorly GRAPHICS
maverick_uk said:
UPDATE:
Chris over at wisbar has now released a beta version that is very stable and the phone rings, you must download the beta version from the forums. Make sure you choose the WM2003 SE download.
Along with Pocket Plus it's the best program for pocket PC. I love it.
I purchased SWdeluxe theme, expensive but wow my phone looks simply amazing!!
Click to expand...
Click to collapse
Hi Maverick!
About the download of the stabil beta, where do you find that one?
Got a link?
I tried the "phone edition alpha", but those were VERY instable on my S100.
Thanks, Hejko
Edit: Or, were your copy the same one as I tested?
Hejko, go to http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1425 and download the version for wm2003se its very stable.
maverick_uk said:
Hejko, go to http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1425 and download the version for wm2003se its very stable.
Click to expand...
Click to collapse
is it the phone version does the phone ring and notify in this version ?? and is this compatible with xda II ?? i tried phone edtion alpha v.4 i guess and had major graphics problem
regards
jeetz
The latest beta version solve this problem ..
Get it there ] http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1425
works perfectlly !!
Ok I'm fairly confused about what Wibar Advance Software I should be downloading.
When on the Lakeridge Website there is a section for Wisbar PPC Phone Edition, but the product listed there is relatively ol, 12-04, and is called an alpha.
Minotavrs,
The Beta you provide the link for does not indicate that this Wisbar Advance is applicable to the Phone Edition, however, I took your advice and I have installed it on my JAM. So far no big issues. I called myself and the phone rang. I noticed when in the Phone Pad Program that you cannot exit from the phone-pad unless you hit the end-call button.
Besides that, at least thus far, this Wisbar Avance (isbaradv2.20112.xscale), appears to work great with my JAM.
So far I'm very impressed. I have never used wisbar, because I have always had a PPC-PE devices and Wisbar would never work with these types of devices.
So-is the Wisbar Advance 2 that I list above made for PPC-PE devices or is the new Advanced 2 Wisbar application just providing extra support for PPC-PE devices?
Minotavrs said:
The latest beta version solve this problem ..
Get it there ] http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1425
works perfectlly !!
Click to expand...
Click to collapse
does this work as a phone edition and does the phone ring if yes then please can someone post the cab file here as the link is broken here http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1425
thanks
jeetz
I just tried the link and it works.
It does work on the Phone Edition.
Some of the phone profiles are missing still.
Signal strength and others.
Still very nice app.
coooool this version works......phone rings too.....notification comes too.....only prob as stated above.....ICONS !!
please keep this thread updated when ever theres any news about wisbar advance phone edition.
thanks
regards
jeetz
wisbar advance does ring!!!
everybody i have instaled wisbar advannced on my pda 02 xda minni and it dose ring i tryed it lots of times and it worked all times so i don't know it might be just your version of wisbar you guys have because my version works awsame
hi all,
i have a p3600 with the new official gps rom. With the previous dopod, i had a nice ring tone which sounds like the old vintage phones. Now with the new rom, i've lost it (and default rings are quite ugly.. ). It was not embedded into dopod rom, rather it had been added by some tweaking utility but i don't remember which. Could anyone who have it, post it here? thx!! (eventually, let me know which program add such rings)
ItalianTytan said:
hi all,
i have a p3600 with the new official gps rom. With the previous dopod, i had a nice ring tone which sounds like the old vintage phones. Now with the new rom, i've lost it (and default rings are quite ugly.. ). It was not embedded into dopod rom, rather it had been added by some tweaking utility but i don't remember which. Could anyone who have it, post it here? thx!! (eventually, let me know which program add such rings)
Click to expand...
Click to collapse
UnZip the attached file and copy it to your phone (in to Windows folder).
Enjoy.
Dopod Ringtones
Shay,
Can you attach all the Dopod ringtones - i have the new HTC ROM and lost the Dopod ringtones that are now missing in the HTC ROM?
Thanks
tnx a lot,shaid!
tsafya said:
Shay,
Can you attach all the Dopod ringtones - i have the new HTC ROM and lost the Dopod ringtones that are now missing in the HTC ROM?
Thanks
Click to expand...
Click to collapse
sorry but i dont have the Dopod ringtones.
actually I am using the latest HTC Rom, and it does have the OldPhone ringtone, so i just copied and attached it to this post.
ItalianTytan said:
tnx a lot,shaid!
Click to expand...
Click to collapse
Any time
Hi, i just got my t-mobile wing yesterday and i'd like to know if i can change and add my own sound for the new text message notification and if so where can i put the sound? Also, does anyone know if i can make my wing go faster when switching from portrait and landscape?
thnx in advance
-pinoy
SMS notification sounds need to go into the Windows dir, and they will show up in the notifications list.
For speed ... try batterystatus to overclock your phone's processor.. but the best option would be one of the 6.1 ROMs that are available.
I recommend ITJE's TOUCH-IT or ASERGs Rom
cool thanks. do u mind me asking what the 6.1 ROMS are and what ITJE's TOUCH-IT or ASERGs Rom are?
Check here for all available roms
http://forum.xda-developers.com/showthread.php?t=358030
Make sure you read the instructions on how to install them
lol. sorry if im pestering you guys but i don't exactly get what a rom is and what that pagepool thing is.. can someone please explain it to me?
Hi!
Main problem with Windows mobile for me is that VoIP can't work with internal speaker.
Reading threats here I came to conclusion that it is the same problem as inability to record other side in phone conversation.
So, when I saw ICR (in call recorder), I saw a solution to that problem.
As I understood it is originally from HTC touch HD and it was successfully ported to HTC toch Pro and Diamond.
So I tried a few Pro and Diamond versions found on their forums. And, of course, every time I had to hard reset my device because of loss of phone dialer caused by different screen resolutions.
Only in one case I noticed some improvement in call recording, and I didn't manage to open ICR application at all.
Then I saw this two ROMs for Polaris:
http://forum.xda-developers.com/showthread.php?t=459826
http://forum.xda-developers.com/showthread.php?t=472351
They both have ICR implemented. In the first forum there was a cab posted. So I tried that cab.
I couldn't get "start record" in menu with or without established phone call so I used external recorder Vito audionotes touch.
I could record both sides of conversation but sound level was unequal. And I don't mean like two sides had different sound level (which they do because the other side was louder, like recording with bluetooth hands free, which is ok as long as I can hear both sides well), but complete sound level was changing.
VoIP worked different. I could hear a lot in internal speaker, but I had a feeling I hear the same from external speaker, just quietly. That's why I'm not sure from which speaker sound comes any more.
And ICR application just wouldn't start. When I press icon in programs nothing happens.
So, any solution for this problem is welcome.
If you have any idea how to make VoIP work on internal speaker or how to record both sides of conversation just answer to this threat.
It doesn't have to be a solution. Any idea may be good and maybe we can come to solution together.
You're also welcome to share any experience consdering this problem.
Thank you all in advance!
I have
HTC Touch Cruise
original WWE WM6.1 ROM
ROM version: 3.13.405.0 WWE
Radio version: 1.59.42.15
Protocol version:25.85.30.07W
Hi...
I'm using the 3LIT3 V Rom and In Call Recording works fine and the sound level recorded from both side is exactly what I hear...
But with a the original ROM, on a Touch DUAL I had to Install the Opal Dialer before get it to work... in the Touch DUAL after the installation of the Dialer it works fine but my phone windows goes very slow!
I propose to use the 3LIT3 V Rom and if your not satisfied come back to your original WM6.1
I use 3lit v too.
But I can't use ICR.
Could any one tell me how to use ICR?
Thank you
wasabi55 said:
I use 3lit v too.
But I can't use ICR.
Could any one tell me how to use ICR?
Thank you
Click to expand...
Click to collapse
once you are in call you have to have the "start recording" foctional.
in Start -> Programs you can find the recorded files and options to where and in which format save the recorded files.
emrause said:
Hi...
I'm using the 3LIT3 V Rom and In Call Recording works fine and the sound level recorded from both side is exactly what I hear...
But with a the original ROM, on a Touch DUAL I had to Install the Opal Dialer before get it to work... in the Touch DUAL after the installation of the Dialer it works fine but my phone windows goes very slow!
I propose to use the 3LIT3 V Rom and if your not satisfied come back to your original WM6.1
Click to expand...
Click to collapse
I was told by the autor of 3LIT3 V Rom that you need Iolite dialer for incall recorder to work.
I tried with opal dialer and it didn't work.
I tried this ICR with C_Shekar WM1.60.21014aCS with opal dialer and olso tried on an Elfin with Onyx 4.2 ROM with opal dialer, it WORKS in both devices with no problem. Hope this is usefull for you.
when you say it work do you mean you have start recordin menu when conversaton starts or you can open ICR program and change some settings?
Having start record would be nice, but only that is not crucial to me. Can you post a link to opal canvas whit which this ICR works.
Can somebody post a link to Iolite dialer whit which this ICR should work.
Is there a way to delete original dialer. Because in case I install one of these and decide to use it permanently I would have three dialers installed (one original windows, one original touch cruise, and the one I use).
Did anybody try Voip (fring, skype, SIP ...) with working ICR installed? Which speaker does sound come from?
What options are there in this ICR program?
Thank you all no your answers!
kulen said:
What options are there in this ICR program?
Click to expand...
Click to collapse
Only two: where to write the recordings (memory or storage card), and in what format (wav or amr). Both wav and amr are 8 kHz 16-bit mono, so quality is rather poor.
Hi, i'm using m-amine 2 with opal dialer.
I installed in call recorder cab founded here http://forum.xda-developers.com/showthread.php?p=3277318&highlight=recorder#post3277318
Now i can see "start recording" under menu during the conversation, but if i tap it nothing happens.
When i open icr under programs, no calls was recorded and i can't change the options (no selectable menu appear).
Which is the correct way to make icr fully working?
I installed opal phone canvas and in call recorder. These are results.
-I can't open ICR in programs. When I press on icon nothing happens.
-When having acitve conversation I do have start record in menu. And I can record conversation. Conversation is saved in My Documents/recording.
The other side can be heard but quietly.
-When using VoIP (fring) sound comes from external speaker. If I enable earpiece sound comes from both speakers, but louder from internal.
- !!!And one big problem. Phone doesn't ring neither vibrate.
I couldn't find Iolite dialer cab so if anybody has it please can you post it or provide link?
Any idea how to make this work with original ROM?
You don't need InCallRecorder to record conversations. Only requirements are having an OS build with AKU of 1.4 or higher, as the newer cprog.exe adds this option.
[HKEY_LOCAL_MACHINE\System\AudioRecording]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
"EnableCallRecordMenuItem"=dword:00000001
"AllowInCallRecording"=dword:00000001
When in call, you'll see a Record/Stop Recording option in your Menu softkey. It'll save the recording to /My Documents/Notes as a .wav file, with the following naming convention: YY-MM-DD_HH-MM-SS.wav
@chavobravo
Thank you very much for explanation.
Can I just install new cprog.exe?
Can I add AKU 1.4 to original ROM or is it neccessary to find ROM already having that build.
Do you know does this somehow affect problem having VoIP only on external speaker?
Or do you maybe have any solution for that?
BTW I flashed your 3LIT3 VI FULL ROM to try ICR. And ROM is really good. It seems faster than original. Only I like cube more (at least until I get used to manilla) because of beeing able to call it from any program.
It seems the only difference between your ROM and my original ROM with your in call recorder.cab is that in your rom I can open in call recorder program and there is start record in menu. But recording with Vito audio notes and VoIP (Fring) seems to act the same way.
For those (like I) who had no luck with the above registry recipe, or otherwise found that the other side is recorded inaudibly, here's a very simple app (sources included) I wrote for myself.
It runs in background and records all incoming and outgoing calls thru the ICR, and should work with any bios/acu/dialer/etc provided that the ICR cab mentioned in this thread is installed. The app itself requires no installation, and uses the ICR settings for the recoring format and dir.
No warranties etc etc, the app may contain as many bugs as possibly may happen to be found in 200 lines of code, please correct them and use the code at your pleasure, you've got the sources anyway. Hopefully somebody will write something more user-friendly based on it.
is this can useing on the SE X1?
To chavonbravo:
chavonbravo said:
You don't need InCallRecorder to record conversations. Only requirements are having an OS build with AKU of 1.4 or higher, as the newer cprog.exe adds this option.
[HKEY_LOCAL_MACHINE\System\AudioRecording]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
"EnableCallRecordMenuItem"=dword:00000001
"AllowInCallRecording"=dword:00000001
When in call, you'll see a Record/Stop Recording option in your Menu softkey. It'll save the recording to /My Documents/Notes as a .wav file, with the following naming convention: YY-MM-DD_HH-MM-SS.wav
Click to expand...
Click to collapse
Are these options suppossed to be in a Jade? After browsing with Regedit, I just can't find them:
[HKEY_LOCAL_MACHINE\System\AudioRecording]
AudioRecording does not exist...
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
Voice does not exist...
Do I have to create them?
Thanks!
How to set icr to auto record any call ?
Tanks
I love incall recorder, I wish everyone would put it in their roms once this is worked out.
It is just too convient of a feature. Some of us have to do work on the cell phones, and it is just to dang convient to hit this and keep going.
I am wanting to upgrade to 6.5, but i want this feature. And just looking at 6.5 now. Wil this work in 6.5? Can i use the link above to get the cab, and then do i need a specific dialer for it?
Default InCall Recorder and 2-Way Record Patch
See this Link
And for the cab file the correct link is here
whats in this rom:
This rom has Footprints but the tab is disabled in Manila... use Manila2D customizer in tools folder to enable it.
There are some minor cosmetic problems because the new apps are original for WVGA but nothing big.
I'm working on getting some more of the apps ported
This rom also has a new way for customizing the rom so it's not UC
Button 4 abow volumeslider
longpress is maped to AltTab to switch between opend apps
longpress is mapped to CloseAll well yes it closes all opend apps
Free ram after fresh reset
Storage 108 MB
Program 47 MB
CE OS 5.2.21028(build 21032.1.6.0)
Stuff from Rhodium:
Enlargen Startmenu
Menu Enchangement
Notification Enchangment
Taskmanager
TouchFLO settings
WIFIsettings
WLANsettings
Comm Manager
medihub
Dshow
lockstream
And lots of the apps in settings
Manila2D from Iolite
Audio Manager (only from Manila music tab)
Camera 6.8 Raphael
Phonecanvas (Opal only 2g)
ThumbCal
Large titlebar
Voliume control
Opal Keyboard Tanks to DupinBJK get more languages here
File Explore with extensions
Connections:
ActiveSync
Google Maps
GPS Tools
Internet Sharing
Quick GPS
Games:
Bubble Breaker
Solitaire
Internet:
IE
Messenger (msn)
Opera Mobile
Windows live
Multimedia
Album (upload to YouTube and Facebook)
Audio Booster
FM Radio
Footprinta
Java
MusicID
Windows media player
Youtube
Office
Calculator from Rhodium
Excel
Notes
Tasks
Word
Tools:
Advanced Task Manager
Manila 2D Customizer Get newst update here
PIM Backup
Pocker rar
Other stuff:
BTFtp
BTSAP
Clear type Tuner
Softkey changer
Account Manager
Uploader
Advanced Network manager
and probable some more
This ROM can be dumped and recooked. Unlike many of the cooks, no RGU have been deleted. No DSM has been deleted. And most of all, the ROM has not been crippled against dumping by deleting IMGFS signatures. So feel free to dump and modify upto your taste. And share the knowledge with the community. We can improve more by sharing the knowledge than keeping it secret.
Download Link
Special Thanks to
hma4 - APBilbo - Cloudyfa - maxniper - itje - Laurentius26 - P1Tater - anja31 - pinobigbird - wmn79 - Duttyroy - dsixda - udk - Noonski
all the DEV's that have made it possible to dump,port and cook roms with their unbelivable tools
Extra special thanks to bepe for putting together some of the best tool around XDA into the DEV kitchen that I use for several devices"
reserved for more
just take one more
hi
thank you men
i like this rom
Very thank you.
In Download!
Which Radio you suggest to use, new 1.59.xx.xx or series 1.58.xx.xx
rspillo said:
Very thank you.
In Download!
Which Radio you suggest to use, new 1.59.xx.xx or series 1.58.xx.xx
Click to expand...
Click to collapse
I've only used 1.59.44.02 with this rom I have a diamond as main phone so I nolonger use my Cruise.
Ok, thank you for rapid reply. The 1.59.44.02 is, for me, the best radio for Polaris
screenshots please ?
I've just used this ROM with 1.65.30.09 radio version.
Phone and internet work fine, but i can't receive file via bluetooth. Most probably it's because of radio version.
I must say, this ROM slower than 3lit3's or c_sheckar's. Scrolling in Manilla tabs is not so smooth as in above-listed roms.
Also I don't know how can I close edge-session, 'cause this notification pop-up don't allow me do that!
I really like new camera, i mean programm =)
So, in conclusion i'd like to say that i'm not impressed by this rom =\
+1 please..!
naxos said:
screenshots please ?
Click to expand...
Click to collapse
Hi .. Great Job!!
ROM looks nice and it´s working smoothly. Please, a request: could you add InCall Recording to this ROM?
Thank you
Dear Gullum,
First, Cruise mobile worth nothing without your Rom.
Secondly, there are some bugs i want to inform. hope that your Rom become the best ever.
1. the songs tab in manila doesn't work at all. it stuck on searching thing.
2. when you try to change phone call ring from notification sounds, it force you to get back to the default ring.
3. when you try to reply msg from the message inbox, some times a msg box said the msg haven't sent.
4. its not possible to touch the battery or volume on the screen.
Could you plz tell us how to solve those bugs.
thanks in advance.
smoken said:
Dear Gullum,
First, Cruise mobile worth nothing without your Rom.
Secondly, there are some bugs i want to inform. hope that your Rom become the best ever.
1. the songs tab in manila doesn't work at all. it stuck on searching thing.
2. when you try to change phone call ring from notification sounds, it force you to get back to the default ring.
3. when you try to reply msg from the message inbox, some times a msg box said the msg haven't sent.
4. its not possible to touch the battery or volume on the screen.
Could you plz tell us how to solve those bugs.
thanks in advance.
Click to expand...
Click to collapse
I can +1 for the ringtone problem. Might have something to do with the filename - there is a space between the name of the default ringtone and the extension?
The only way I could fix mine was to convert the ringtone I wanted to use to wma from mp3 then rename it to the default ringtone name. Copied it into the /windows folder with Total Commander and all fine.
Also, couldn't get QuickGPS to work. Same problem as with the udK ROM I think - gets to 76% then reports connection error.
Otherwise, very nice ROM gullum. I especially like the Rhodium stuff. Other cooks are giving us the same apps but with newer sys/xip which often doesn't really make a whole lot of difference. Thanks.
Hi Gullum!
your rom is very very good and cleanly.
I'd like modify some things in this rom.
Please share your kitchen if not secret.
Thanks.
Dear cr1960,
that's right, i checked the ringtone & found that there is a space between the ringtone name & it's extention. unfortionatlly, i corrected that but still have the same problem.
i also checked the other ringtones, they all correct.
what should i do?
smoken said:
Dear cr1960,
that's right, i checked the ringtone & found that there is a space between the ringtone name & it's extention. unfortionatlly, i corrected that but still have the same problem.
i also checked the other ringtones, they all correct.
what should i do?
Click to expand...
Click to collapse
The only way I could fix mine was to convert the ringtone I wanted to use to wma (from mp3) then rename it to the default ringtone name. Copied it into the /windows folder with Total Commander (replacing the default ringtone) and all fine.
Good luck!
its really hard to post any sreenshots?
"Invalid file" error on MediaFire, can't download((
jiles said:
"Invalid file" error on MediaFire, can't download((
Click to expand...
Click to collapse
Then download from RapidShare...
Hmmm..... just realised the post with the link isn't here anymore, maybe something to do with the site going down a few days ago? Oh well, here's the rapidshare link:
RAPIDSHARE
Yah, there was a crash and a backub a day or two ago. Thanks for link.