So fr some reason my Bluetooth stopped functioning properly. It recognizes deviced, but the services to the devices aren't being recognized. My HT820's don't show the headset and stereo services when I try to connect to it. And if the Bluetooth is left on when the phone goes to standbýit doesn't cme back on. I can't afford to do a hard reset right now. anything I can do?
Related
Hello,
I have a problem with my new headset from Sony-Ericsson HBH-DS970. It works quite well, numbers are showed on the small display, keys are fully working with Mortplayer, audio is diverted on headset when a call is coming but..... but.... every time I lose the connection between headset and phone, I have to delete the device and pair them again. It doesn't connect himself automatically when in the phone range!!!!!!
is it possible to fix it? otherwise it is unusable.
thanks for help, sorry for bad english.
fausto
Have you tried hitting the "Play/Stop" button on the 970 to re-establish the broken connection? It should re-establish just fine long as Bluetooth is still turned on on your phone.
thank you very much for reply Sharnet,
nothing happen, even if pushing the phone button on the headset, very strange behaviour.
The only way to reconnect it, is to enable A2DP function pushing on the BT icon on the tray.
But Tytn II doesn't connect automatically BT device when in range?
thanks for answer,
best regards.
fausto
When I had the 970's and also my currently used 980's, they never auto paired just by turning on bluetooth on the phone - I always had to hit the "Play" button (NOT the phone button on the wires, the Play button near the display) on the 970/980 to get them to pair.
I do remember that the 970's have a button for "single/multi" mode - and they are very picky on being on the right position when pairing for the first time. Maybe try deleting the pair, change the button to the opposite of how you paired with it (when looking at the display, it is on the bottom right), re-pair.
I finally managed to get my titan fully flashed and working properly with one exception....anytime I turn my bluetooth headset off I have to go back into the bluetooth settings on my phone and reinstall my bluetooth. It seems that for some reason whenever I shut the bluetooth headset off it or the phone iteslf decides that it is no longer needed and removes it from the phone.
Anyone have any ideas on this?
Thanks
I am hoping someone can help me out I am trying to get my PC working as a bluetooth headset for my wizard the problem I am having is that i get the little headset symbol on the phone but when I choose turn on headset nothing happens I have enabled headset and audio services on the pc and the phone sees it as having the headset service.
and and the pc dings and says the phone is connected to the headset service if it matters my bluetooth uses the older widcomm drivers
any help would be great,
yonu
any ideas?
Thought I'd fire off a thread to see if anyone else was having issues with BT on their x10's, this stems from an issue I was tracking originally shown by the Wiimote controller app (http://forum.xda-developers.com/showthread.php?t=672884 from about page 21 onwards) where by bluetooth on the phone and effectively the controller would lock up and both would need resetting before they would work again (turning off the bluetooth on the phone would work but then not allow it to be switched back on again untill the phone was rebooted).
I then also tested the BT by trying to do a large file transfer (700mb) via BT from my laptop which was unsuccessful even after several attempts I was never able to get past about 5% (small files <10mb seemed to be ok as I've transfered photos etc accross with out issues), this however didnt result in a complete lockup of the BT it just stopped transfering after a while and would eventually time out (although i did have to unpair and reset both on one occation as the laptop started to fail transfers imediatly before even actually trying to send).
Has anyone seen similar?
Yes, I have had some BT issues, just like you I had BT crash and had to restart the phone to be able to start BT again.
If I remember right, I was just connecting my MW600 headset to the phone, and already had my macbook associated to the headset.
Playing around trying to make the headset work somehow crashed BT (forcing a restart of the phone)
And another problem i´ve had is that sometimes you are unable to reconnect the headset and having to restart BT in the phone to make it work again.
BT also crashed once when I had it connected to my car, in the middle of a conversation, again forced to restart the phone to be able to start BT.
Yeah, there are some issues to iron out...
It can perfectly pair device and use for both phone audio and music. After I disconnect and reconnect headset again. The phone audio are not work and when I go to setting of pair device "Phone Audio" is unchecked and it doesn't let me check it.
However, when I restart the mobile, it works again unless I turn off and on the bluetooth in setting and the issue come again.
Anyone could help? Thank you in advance
*
Note:
Issue just start, before that it works perfectly.
Now, The headset is working with other phones.
The phone is using Stock firmware 6.0.1
Snutty said:
It can perfectly pair device and use for both phone audio and music. After I disconnect and reconnect headset again. The phone audio are not work and when I go to setting of pair device "Phone Audio" is unchecked and it doesn't let me check it.
However, when I restart the mobile, it works again unless I turn off and on the bluetooth in setting and the issue come again.
Anyone could help? Thank you in advance
*
Note:
Issue just start, before that it works perfectly.
Now, The headset is working with other phones.
The phone is using Stock firmware 6.0.1
Click to expand...
Click to collapse
I have an HTC 10, also on 6.0.1, and I have the exact same issue. I've tried safe mode, but it didn't make a difference. I found an old post about a similar issue that blamed Ok Google voice settings, but that didn't help either. Something had to have updated to cause this suddenly, but I can't figure it out! This can't be a coincidence.
Cross referencing this to another post with same issue: https://forum.xda-developers.com/showthread.php?t=3548423
Sent via the power of 10!