I recently upgraded to the new WM6 ROM, for the StarTrek and now I can't use PIE or any other web browser. There were no ATT factory settings with this ROM so I had to enter all the GPRS and Proxy settings manually. I looked them up and entered them exactly as they were written and I still can't use it. PIE just says connecting then Locating for a while and then says: "The page cannot be found. check the name and try again." It can connect (although other apps still can't access the internet) so I think the problems with the proxy. Any help would be appreciated.
Related
everytime i try to go on the internet with my sx56 i get an network log on
screen that asks me for a user name, password, and domain, i have t-mobile and i called them up and they said that i needed the t-mobile software or settings. need help. and i also need to know if i can upgrade
this phone i tried doing it and it gave me some error message talking about how the version i was trying to upgrade to was incompatible.
I seek other 9502 ultimate owners and experts advice on the below:
Upon trying to connect to the internet using the GPRS functionality, I always receive the following error message:
“Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap settings. If the problem continues, reset your mobile device according to your manufacturer’s documentation and try again”
I have tried the following steps:
- Reviewed the connection settings picked up by the Imate configurator upon first boot, they were correct.
- Tried to remove the SIM card and use it on my JAMin, the device connected smoothly (with the above same connection settings).
- Hard reseted the device, still it didn’t connect.
- Checked the Operator settings of my provider on the internet, they are the same ones loaded by the Imate Configurator
- Tried another SIM card, same thing
- Went to the service provider and changed the SIM card and got a new one, same error
I shall appreciate any assistance.
UPDATE
Finally!!!!
After installing the new WM 6.1, the device connected smoothly
.
From a 9502 owner
Hi, I have read your post and looked at my Ultimate to find anything obvious and I cannot. I am on O2 in the UK and used the configurator settings which worked fine. If there are any settngs you would like me to verify for you, let me know.
Oh! did you check the phone settings as well as the network connection settings, it's possible that a default in there does not tally with your provider (Goto the Wireless Manager and Tap MENU|PHONE SETTINGS).
Cheers
Eden
GPRS - Ultimate 9502
Thx for your reply.
I have tried every possible combination of Network / Band selection from the phone settings but it didn't work.
Imate have responded that it may be a ROM issue and that they are working on an new updated ROM to be available soon that will probably solve the problem.
Meanwhile i am trying to figure out some registery tweak that could fix the problem (trial and error)
WM 6.1 Link please
Can you please post the link to the WM 6.1 ROM that resolved your problem.
Thanks
iMate 9502 WM 6.1 ROM
http://forum.xda-developers.com/showthread.php?t=407336&referrerid=676710
I live in Switzerland and I bought HTC Shift from US.
I'm trying to connect in SnapVUE via 3g SIM but I always get "the answering modem has disconnected".
Can perhaps help i00 rom ? (http://forum.xda-developers.com/showthread.php?t=480525&highlight=sim+lock)
Any help ?
Thanks.
Most probably you need to enter the correct GPRS/UMTS username/pass in your connection settings.
You could also do a "clear snapvue" and have the automatic settings take effect.
Find your APN username and password for your GPRS telco and enter it in connection settings, You might even need to create a new 3G connection first.
Flash i00 ROM anyway, it will greatly enhance your shift.
Hi lucid,
I don't have GPRS/UMTS username/pass.
The SIM I'm using works well without user/pass on a Tytn II so I don't think they are required, aren't they?
When you say "Clear SnapVUE" do you mean to reset it using HTC official tool?
Because I already did it.
When I try to set up conection I do the following (read on HTCmanual):
Snapvue --> Settings --> Connection setup --> select country and carrier --> autoconfigure --> restart
After that I try to connect but get the same errors.
Thanks for help; I have to make it works.
Hy everybody,
when i try to connect to a site it says " the page cannot be found. check name and try again later". i have changed 4-5 roms and nothing , even 1 radio rom change. the proxy server box in connection settings is unchecked (unticked) , i've tried both ways but still does not work. when i click the "E" symbol on top of the screen it says internet gprs (edge) connected and it gives the time for the connection. if it is connected shoulden't IE work ?
I NEED HELP !!!!.. i don't know how to solve this allthou i am a computer/ppc maniac.
I did a search and came up with nothing.
This is a new phone and I keep gettin this error if I use anything that needs to use a Data connection ( Error 80072FA8 )
Any ideas ??
Ok a frustrating amount of time I stumbled on somthing which workes.
This is for Users on Vodafaone network in Australia or your carrier uses is Vodafone
On the Homescreen, scroll right and select Settings > mobile network or cellular > add apn.
Enter vfinternet.au in the APN field.
Enter the user name and password listed below. If no value is listed, leave the field blank: -
User name:
Password:
Tap the Tick icon.
http://www.vodafone.com.au/help/devices/ota-settings/index.htm
Depending on your carrier to find somthing I typed into Google
GPRS settings for ----------- ( your carrier name & country )
Help: Cant update via Zune; Error 80072FA8
Hi I'm new here. :angel: I'm encountering the same error code, however on Zune software.
I’ve a Nokia Lumia 800 and I’m encountering these two error codes : 80072FA8 & 801811C5. Second error code only came when I tried to use a samsung data cable.
Just when the phone is connected via Zune, a dialog box appears “Can’t connect to internet through your phone. However, you can still sync items.” Then when I click on update the error code 80072FA8 comes sooner or later. I’ve tried everything that is told in KB 2484484. It seems that the problem is in proxy settings (googling told me this), but I’ve a wireless USB datacard. Proxy settings are not defined here. I don’t know what is causing this problem in checking for updates. MS has pushed 7.8 update and I wanted to check if it’s available in my region (India), if not, there is a way to force push the updates by tricking Zune, so wanted to try that. But my Zune is not even telling me that updates are available or not!
I’m going crazy as my phone is not getting flashed (bootloader problem, I think as many people told) I did everything to get it flashed through Navifirm & Nokia Care Suite, but it only gets hard reset. I sim-unlocked my Lumia 800 which was on Telus (Canada) and now using it in India.