Database Users

HaRET don't bootup linux :(

Hello ,
I'm a newbie and have used the introductions on http://wiki.xda-developers.com/wiki/HimalayaLinuxBooting to boot linux on my himalaya. Unfortunatily the pops up dialog "Launch a script file. Default ..." when i tap on HaRET-0.3.2d.exe . I can't connect to port 9999, too.
Please Help me
Thanks

Hi snowdrop,
the dialog means that your prepared scriptfile hasn´t been found and executed. This could be because you misspelled the name. Keep in mind that all filenames have a 3-letter extension which is not visible in windows. I.e. if your FileExplorer says "startup.txt" the filename is "startup.txt.txt".
Or maybe you installed the startup script in a different directory than HaRET. IMHO it´s easiest to install all 4 files (haret, startup, kernel, initrd) in a separate dir unter \Storage where you don´t have to reinstall it after a reboot.
Don´t hesitate to ask further if this doesn´t anwer your question.
Matthias

Hallo noone,
thanks for your reply. I copied all neccessary file under "\Storage Card\". The filename is "setup.txt" (the filexplorer says startup without extention but i'm sure it is named startup.txt through my activesync under Windows). All files are under "\Storage Card\", (also the HaRET-0.3.2d.exe and startup.txt files). :roll:
Greets

Hi snowdrop,
I'm not really sure about that. It works for me all the time.
Maybe you can track down the problem with a network connection. You have to disable ActiveSync on your host PC and to start a connection with SynCE. This requires usbserial and ipaq as well as ppp loaded into the kernel. When you cradle the himalaya you should get a message from usbserial about the attached device (usually /dev/ttyUSB0).
After synce-serial-configure (root), dccm (user) and synce-serial-start (root) the Himalaya should display the connection sign in the bottom bar. Be careful: ActiveSync on the Himalaya may or may not try to start a GPRS session. This can become expensive sometimes
After establishing the PPP connection from PC to Himalaya you connect to port 9999 (refer to SynCE's documentation about the IP addresses). Then you can enter the commands of the startup.txt script line by line.
HTH
Matthias

Hello Matthias,
what is SynCE? I'm using Windows as host PC.
Are synce-serial-configure (root), dccm (user) and synce-serial-start Linux Tools??? :?:
Thanks

Ok,
i after some hard work (and hardware reset), i'm now able to see the penguin(with red eyes and red thermometer) . But then nothing will be done
Actually I thought, that there is also a graphical user interface for linux. Now my question:
Do you ONLY remote login into your linux and have JUST a console application? Or have you also GUI applications and a desktop under linux for himalaya at the time.
Thanks for your answers

it will of cause never run any linux applications not compiled for it
like windows CE will not run pc windows applications
if you can find a kernel compiled for it
you can use it otherwise you'll have to compile your own
the same goes for a version of x11 and any other applications you may wish to run
though in the world of linux sourcecode is much easier to come but and compile yourself then they are under windows

Hi,
can you give some usefull links about linux application on PDA?
I want too much to run linux under my himalaya .

havent really messed with it
here is another distro for xda not sure if he ever got finished with it
http://www.pigeond.net/photos/xda-linux/
havent kept up on it really
what you have to look for is pretty much
applications for the arm cpu
and you can also look for linux of ipaq and other pda's which use the arm cpu they would also run on the xda
but i havent really kept up todate about the whole project
so i dont know how long any of the project have gotten
and i dont know how many applications can be portet because of graphical limits in the desktop manager like glib
but i'm sure there must be others in this forum who mess around with these things

Maybe the guys at handhelds.org could give you some more info, got lots of help getting linux running on my ipaq 5550 (never quite got it working to my liking though)

How can one scan and modify every IP packet that goes thru PPP (dial-up)?

Hello. I want to scan and modify every IP packet that goes thru PPP (dial-up) (or thru all interfaces if easier). I've done a lot of research and found that maybe the only way to achieve this on lousy wince is to patch the OS itself...I am an x86 programmer and I've done this relatively easily on winxp...
P.S. How can one debug wince os code in ROM with software debuggers?
P.P.S. So far I don't have any solution to my problem so it would be a success to do this even with one device (I have htc universal for tests...)

Today I've finally downloaded the platform builder and so called "Shared" code of wince 6.0...To my surprise I found ARM4 .lib files instead of source code for everything that I needed to look in (ip*.*) . However there is a binmod utility and other stuff for editing rom that you might need. I don't need to modify rom since i can neither debug ROM nor have it's source even from a different version of wince (I need for 5.0). M$ is sh*t as usual.

It is the har work to modify ppp packets on pocket pc (wince).
Yo can try the passthru sample in PB:
\PUBLIC\COMMON\OAK\DRIVERS\NETSAMP\PASSTHRU
and
\WINCE500\PUBLIC\COMMON\OAK\DRIVERS\NETSAMP\ASYNCMAC
i think you have to modify the drivers.
good luck !

Help coding a Flash7 wrapper for WM5/WM6

We need to update one of our old pocketpc programs to Windows Mobile. It's a pretty simple program, but I'm not a C#/VB programmer.
For a visitor center we give the visitors a PDA with a flash interface. The only thing the wrapper needs to do is:
Play a flash7 file Fullscreen (regardless of resolution on screen)
Disable all hardware keys (but send to flash) and flash right click if possible.
Receive quit & reset command from Flash
Flash Lite is not an option as we use flash communication server for all communication.
This was no problem for PPC2003, but the old program does not work in WM5/6. Since we have simplified our wrapper functionality I thought it would be simple to create a new flash wrapper. I can preinstall the flash7 plugin.
Option 1: I've managed to get a C# file running if I embed IE and let that open a html with a swf, but I still need to block all hardware keys and flash right click. I've tried several things, but nothing works. It also seems like using IE inbetween is a bad solution. Embedding the flash player directly by adding it as a reference like the VB example below.
Option 2: I VB if I add the flash.dll (extracted from cab file) as a reference and run the following code:
Code:
Dim FlashObj As New ShockwaveFlashObjects.ShockwaveFlash
FlashObj.Movie = "main.swf"
I don't get a error, but I also don't get a visible flash file...
Any ideas? I know several people need to play flash files on wm5/6 as Zinc and other commercial wrappers don't support it.
I would pay for a product like this

Getting started with ROMs

I want to modify the messaging program but I've not done any WM coding before. I've looked at a number of posts on the forum and taken a look at the wiki but I'm still totally confused about where to start.
My current view is that I need to:
Extract the messaging program from the ROM I'm using
Is this possible? If so, what tools do I need? I found a few utilities that look promising on the wiki but there is no documentation for them so I've got no idea how to use them.
Disassemble the program
Can I do this with Visual Studio? Ideally I would like to step through the execution to find the bits I need to change, can I do that with the extracted program in the WM emulator? Or can I do it directly on my PDA?
Patch the program
I can probably figure this bit out by myself.
Get the patched program onto my PDA
As the program is in ROM, I'm assuming I'll have to re-make the ROM. Or can ROM files be updated/overwritten without rebuilding the ROM?
Each of those steps is assuming the previous one is the correct approach and is actually possible. I'm not looking for hand holding at every step, just some good pointers to relevant information and tools. Thanks.

0. - which programm you want to hack ?
1. What type of PDA you use ?
for example - for hx4700 -
prepare_imgfs.exe dump.dat
viewimgfs.exe imgfs_raw_data.bin
2. IDA - diassemble, or Visual Studio for debugging - if you know how
3. What type of PDA you use ?
for example - for hx4700 - like vivi kitchen.
4. ...

Thanks for your reply.
0. - which programm you want to hack ?
Click to expand...
Click to collapse
The messaging program, is it called Outlook Mobile? Do you know if it is native or managed code? If not, what's the easiest way to tell?
1. What type of PDA you use ?
for example - for hx4700
Click to expand...
Click to collapse
I've got a Kaiser. Currently running "udK 8.0 R0 Vega" ROM (WM6.1). Forgot to mention that in my previous post.
IDA - diassemble, or Visual Studio for debugging - if you know how
Click to expand...
Click to collapse
Does IDA support remote debugging on Windows Mobile? Also, are there any restrictions on what you can debug in VS, ie. do they stop you from debugging things you don't have the source for or are Microsoft applications (eg. Outlook) restricted from debugging in some way?
I'm finding it really hard to get decent information on these kinds of things. If I actually manage to get anywhere with this then I'll write up some kind of guide for the wiki.

Ok, I've used this tool to extract the ROM and get a file called 00_OS.nb. I then got these tools and managed to dump the NB file so that I now have all of the files inside the ROM.
I've been playing about with IDA but when I try and run poutlook.exe in the debugger, it runs but exits straight away (ie. it doesn't create a window on the PDA). I tried copying poutlook.exe onto my device but it doesn't run, I think I need to get it running from the exe before I do anymore IDA stuff. I remember reading somewhere that executables in the ROM image have been manipulated in some way (addresses rewritten or relocated or something), is that what is affecting it? Or do I need to run some additional tool on the extracted exe before it will run standalone?
How do I get an executable extracted from the ROM to run on my device? Or do I have to roll it all up into a ROM for it to work?

Modify SourceID of a contact

I tried to find on internet but found nothing on it.
I am trying to modify the SourceID of a contact on Windows Mobile.
I am using .Net, and by now i am sure that it cannot be done.
But if someone can possibly write me a small wrapper which has a function to do this.
I will use that in .Net and pass it an ItemID & SourceID as parameter, and it will modify SourceID of that ItemID.
I am not a guru in c++ and thats the reason i seek help if anyone could help me.
Just to add, Windows Mobile 5/6 SDK comes with a sample app called PimExProvider
It updates all contacts SourceID to a new available id.
This code will surely help to start with if someone can help me.

I was able to do it myself.
I created the c++ dll and called it in .Net.