Battery/Charging Problems - 8125, K-JAM, P4300, MDA Vario General

I just recently bought a wall charger since I lost the original one a while back. I've been charging via USB this whole time (maybe 6-8 months now). Anyway, when I charge with the wall charger, it'll say 100% and the green light would turn on (instead of the orange/amber for charging) so I assume that it's done. As soon as I unplug it, it drops maybe like 20-30%.
Is this a problem with the charger? Or the battery itself? I don't think it's battery since I've never had this problem when I would charge via USB. Could it be that my phone's just not used to being charged with a wall charger? Maybe because it's being charged faster with the wall charger that it's "used to" with USB? Any thoughts would be great.

No there's nothing wrong with your phone,if it gets charged via usb,then its fine.Fault is with your new wall charger,is it compatible with your phones specifications ? is it the original recommended or from other third party manufacturer ?. Wall charger must output a charge of 1.0 amp to fully get the pda battery,less then 1.0 amp will not charge the battery. Check this out,ok
Cheers!

Related

JASJAR charging time

Hi. Got my hands on slightly used JASJAR and I was just wondering how long does it usually need to fully charge using USB and wall charger.
I left it overnight on the wall charger (which I doubt is an genuine one) and for 6-7 hours it charged to about 60-70%. The second time I connected it on my desktop USB 2.0 port but the result was same.
The battery seems to last OK, there are no sudden dropdowns etc. The device is freshly formated, flashed with TML WWE 6.1 (D.08.20) no applications installed etc.
Here is the pic of the wall / travel charger
Welcome to forums
Charging time may vary from original charger to another one.
Normally I left my Uni to charge before I go to sleep and when wake up is fully charged, and last me 28hr aprox.
USB charging I read somewhere it´s not recommended as shortens battery life (not sure if this is actually true but I have USB charging disabled)
Enjoy your great Uni!!
Thanks for replying.
What do you mean disable USB charging. Is there some other way to charge this thing? All I can see is the mini usb port on the back
I reflashed Tomal 8.9 and I bought the USB to mini USB with two USB A plugs that go in the PC. It is supposed to provide 1000 mAH and it kind of charges faster now.
Oh btw, I checked the battery and its not OEM battery, maybe replacement I don't know, but it works ok.
1590 mAH 3.7v
I was going to say in your original picture (charger) is only 500mA. The original Uni charger is 1A (1000mA). To 'fast-charge', you need the 1A charger, which I see you now have, so that's alrighty!
Yup it sorted out. Great device btw.

Charger provides 1000 mA, yet phone only takes 500.

Hi,
I bought a wall charger for my N1 today. I was searching for one with 1000 mA output so the phone would charge twice as fast, but after having it on for a long time and seeing that it was only 22% charged, I looked at the battery status and it said "USB". I unplugged it, plugged the stock adapter and it said "AC", and started to charge at the usual speed.
Is there a way to have wall chargers that are NOT the ones provided by HTC charge at a normal speed? thanks!
Interesting... it happens the same thing with an iPhone charger, which have the same output characteristics as the stock charger. I never thought looking at the battery status
FWIW, you can easily see if your phone is charging fast or slow by installing the quick system info app (AC=fast, USB=slow).
I'm using the 1000 mA charger with the USB to micro USB cable that came bundled with the phone. Might it be the cable limiting the power?
I've been trying to figure this out too...
I bought a USB car charger to charge my phone in the car whilst driving.
However even with my phone on standby it still loses power.... I don't know whether it's because I'm using the USB cable or the charger is inferior.
It is rated a 1000mA (the charger).
I bought the HTC car charger from expansys.. bit costly at around £20 for a charger but it works perfectly for me. Drove 4 hours with copilot running, and battery remained perfectly charged
As well as the stock charger, I often use a pikie USB charger with a Nokia micro USB cable... phone reports an AC charger in use.

Phone says it is charging but it is not actually charging

Last night I charged my phone with the standard charging cable and the phone said it was charging. This morning I woke up and it had not charged at all. It still says it is charging but no power is going to the device. Any thoughts on how to fix this? Thanks!
Edit: Wireless charging is also not working.
I would try to charge the phone with another micro-usb cable without changing the stock 1.8Amps charger. It's very common for those cables to get damaged after some time of usage and not deliver enough current for the phone to charge.
That did not seem to do anything. The fact that wireless charging also isn't working has me worried.

Please Help me - my cube-i7-book wont charge (Wall charger & Usb-c charger )

Hey guys
First, I hope I'm asking at the right forum. I searched at xda and it seems to be closest that fits. If there is a need to transfer it to different forum please do or let me know there to.
Than, I have a big problem and I do hope you can help me with- my Cube-i7-Book don't charge not by the Wall charger nor by the Usb-c charger.
I read a lot about the coube-I7-book and just before they started talking about the new one I bought it (+original keyboard). It arrived and I start using it about 3 moons ago.
1. Last moons I bought a Aukey fast USB desk charger (charge other devises ) and try to charge my cube-I7-book with the USB-c cable I got with my LG smartphone. It looks like the charger is connected but it doesn't charge (I try again and again).
2. Last night my cube-I7-book buttery was very low. I connected it to the wall charger as I always do and went to sleep. In the morning I took a look at the cubeI7-book. I was surprise to see it was still charging. I let it to continue charging. At the evening I checked again. It got 61% and stop charging. I re connect it to the charger and to a different wall socket - there was no reaction. I restart the cubeI7 book -nothing.
3. Could the problem is in the wall charger? If so what different charger l have to look for in order to check?
4. If it's not the charger, what can it be and what can I do to make it work? It is a new device and I really want it to work.
5. What about the USB-c charging? Why isn't it working? Can I do something about it?
Thank you for your help,
Did you manage to fix your problem. I have the same issue. Did you try to use a macbook usb-c charger, instead of a phone usb-c charger?
Only just seeing this, sounds odd. USB charging works well for me (although sometimes I need to unplug and replug the cable if charging doesn't start right away). You need to make sure that your USB c charger provides "power delivery " and in particular, I think, 12v charging, maybe 9v is also OK, but the standard 5v that some USB chargers provide is definitely not enough.
You may have a look at the forum on techtablets.com, there's a subforum for the i7 book with wire a few people active.

Charging to 80% only (usb pd)

Hey!
So I get this funny little issue when charging with my usb pd charger.
The S10+ only charges to 80% then stops. I have to unplug then plug it back in again to get it to start charging to 100%.
Have no issues with the stock charger (will continue to use that for the time being).
I suspect it has something to do with the battery protection. But I've not got a clue. Any thoughts?
The usb pd wall charger I'm using is a ravpower 36w (max) unit.

Categories

Resources