Related
I upgraded my device (PW10B1, Wallaby 5.15) from PPC2002 to WM2003final downloaded from http://www.romkitchen.de, I used SD card type-1 and the writing completed successfully but after cold reset, Wallaby boot screen showed up again and stopped with "GSM OK" message and won't go any further. Please help, Thanks.
When you get GSM OK, you are in the bootloader.
Maybe a malware of your powerbutton....
if you just do a softreset, what happens without touching the powerbutton?
Stefan
actually I got the device in damaged condition from a friend, before upgraded it won't boot to windows, it was just keep displaying Wallaby boot screen with "GSM ERROR" message when turned on. After upgrade process and soft reset (with and without touching power button, the results are the same) Wallaby boot screen is still displayed but the message is "GSM OK". I'm thinking the same thing, the power button may be damaged somehow, I'll try to check that, I'll let you know what comes up. But is there any other possibility for the problem? Thank you very much Stefan.
Joyo
No, normaly not, btw. i do not know any possibility.
Stefan
power button
I tried to work on the power button, opened the device and take a good look at the switch, physically it looked just fine. Well, guess I just have to let that one go :? Thanks for the help Stefan.
Joyo
Hi thejoyo, have successful you recovered your wallaby? I have exact problem:
1. The device automatically enters bootloader 5.22, says GSM OK and then stop. Buttons dont work, except for two reset button.
2. Charge led (usually amber when charging) turn RED
3. I managed to flash the device by SD card method but did not success. When i put SD card into device and reset, it automatically flashed itself!!! Without my permission, didn't press OK button!!! It's very strange. Then it said that flash success, cold reboot. I press reset button and it enter bootloader again, like i have never flashed it.
I have tried many SD card, still no luck.
Should I try something else? Please suggest me what to do next!
okay quick breakdown... I bought a Cingular 8525 unlocked this past saturday, and i love it! OKay so i loaded Resco Registry on the phone because i wanted to take away the start up image and the start up sound because it was annoying. So in doing so, i editted out the registry, and got rid of the annoying sound, and i used "splat.wav". and put a pic of my car up there. Now I restarted it, the device turns on, the device info shoes up with the AT&T Logo, and the wav file doesnt load, and my background image is there now, but it just stays there.. nothing happens after that. It just stays on that same screen. Did i just basically ruin my phone and in return got a very expensive paper weigh? Please let me know if there is a safe mode or something for me to revert these actions...
You might have deleted some registry entry or file that Windows Mobile needs. You can either figure out that these might be or just reinstall the ROM file.
You would lose any data that you saved to the phone UNLESS you saved the data to the Storage Card (MicroSD) Memory.
From your description, you have not bricked it.
You normally brick a phone when you get a 'No GSM' error or Missing IMEI and CID.
Good luck.
crazyut said:
You might have deleted some registry entry or file that Windows Mobile needs. You can either figure out that these might be or just reinstall the ROM file.
You would lose any data that you saved to the phone UNLESS you saved the data to the Storage Card (MicroSD) Memory.
From your description, you have not bricked it.
You normally brick a phone when you get a 'No GSM' error or Missing IMEI and CID.
Good luck.
Click to expand...
Click to collapse
I agree it does not sound bricked so yeah a hard reset to reinstall ROM.
Mike
that's the problem. I try to re-flash it, with the latest cingular rom, but it doesnt boot up into windows. It just stays on that screen. =(
Ah.. that's different. Thought you had just changed a few reg entries. You will need the help of the ROM Gurus - that's not me!
Mike
yobeez said:
that's the problem. I try to re-flash it, with the latest cingular rom, but it doesnt boot up into windows. It just stays on that screen. =(
Click to expand...
Click to collapse
You can hold down two buttons when powering it up and it will enter the flasher mode. I forget which two, but keep trying to hold down the "hard buttons" (buttons 1-5, not any on the keyboard) while powering it up or doing a soft reset. One combination will erase everything like a hard reset, the other combination will bring you into bootloader mode to get a flash going.
This worked on the wizard, and I swear I've done it once by accident on the Hermes.
the power button and the ok button
The power button on the right of the Hermes and the OK button on the left, just below the scroll wheel are what put it into flash mode.
thanks guys, i performed a hard reset and it now works... now i have to reinstall every piece of program that i had installed before.. THANKS!
Need your help, guys.
Well, it began last morning, when my uni refused to turn on. No reaction on power button, no charging indication. Ok, i tried to call hard reset menu. It was intact, but when i pressed '0', it went back to empty non-lit screen. Bad try. Then i decided to flash it with new rom - had nothing more to lose anyway... Well, bootloader mode was also intact. First try was failure though - flashing went to 99%, then crashed with an error (don't remember it's number, sorry). Second try was more 'successful' - flashing was 100% done, but after reboot i've got a garbled boot screen (it's rightmost part) and nothing more. Device is just stuck at that boot screen and doesn't want to boot further. I tried several other roms - same picture everywhere: os booting stuck at garbled boot screen. What can be done here ?
P.S. I-mate JASJAR, 64 Mb.
Tigger2 said:
Need your help, guys.
Well, it began last morning, when my uni refused to turn on. No reaction on power button, no charging indication. Ok, i tried to call hard reset menu. It was intact, but when i pressed '0', it went back to empty non-lit screen. Bad try. Then i decided to flash it with new rom - had nothing more to lose anyway... Well, bootloader mode was also intact. First try was failure though - flashing went to 99%, then crashed with an error (don't remember it's number, sorry). Second try was more 'successful' - flashing was 100% done, but after reboot i've got a garbled boot screen (it's rightmost part) and nothing more. Device is just stuck at that boot screen and doesn't want to boot further. I tried several other roms - same picture everywhere: os booting stuck at garbled boot screen. What can be done here ?
P.S. I-mate JASJAR, 64 Mb.
Click to expand...
Click to collapse
Welcome to the forum
Please do the DOC format if you notice a bad flash or the device is stucked on boot-splash (after flash) and then do a re-flash.
In the Wiki you can find how
http://wiki.xda-developers.com/index...=HTC_Universal
Good luck,
Thanks, man. Formatting DOC did the trick.
Tigger2 said:
Thanks, man. Formatting DOC did the trick.
Click to expand...
Click to collapse
That´s good to know!
Enjoy! and don´t forget to vote!
Ok.. So a friend of mine suddenly got a triangle with the exclamation mark picture on his phone. That's all it boots up to. So, he took it to T-mobile, they told him it's FUBAR, and sold him a new phone.
The fact that the thing boots to a recovery mode tells me that there's SOME way to un-FUBAR this phone. My friend is too technologically inadiquate to attempt to do any modifying, so I'm going to assume he was at whatever firmware level would hve been blasted out to T-mobile as of last Friday 01/15/2010.
If I boot the phone normally, it gives me the TriAngle. I pop open the keyboard and hit alt-L and the I get the Android System Recovery menu. at the bottom I get "E:CAn't open /cache/recovery/command"
I've spent all day bouncing around this forum, and many like it, downloaded all sorts of G1 fimwares trying to go back to RC29, RC28, 30, 33.. gah! The latest one I'm trying to update to is "signed-kila-ota-116143-prereq.TC4-RC19+RC28+RC29.zip" Which i rename to update.zip . I hit alt-L, select 'update from SD card' It goes through:
--Install from sdcard...
Finding update package...
Opening update package...
Verifying update package...
Installing update package....
Installation aborted.
That's it... no more log than that.
I've done the Alt-W, and Alt-S.. wiped cache partition. I think playing around with the recent firmwares might be fun, but I'd like to get this bad boy reset back to factory defaults. I've read the forums here on how to do that.. but all of the procedures fail.
I can get Windows 7 to recognize the phone, but I cannot access the sd card while it is in the phone. I've been transfering data to it by taking the sdcard out, and putting it into a known good SD card reader. I've formatted the sdcard to FAT16, and FAT32 quick and not quick.
Seriously.. why is this so complicated? Now I need some serious digging assistance. Is there an interface that will allow me to directly talk to this phone via the USB cable? How can I force an firmware onto it? Clearly something is functional, or I would get no I/O. How can I get this silly thing back to where it was? I know this thread seems like a redundant one, but as far as I can tell, its not. The typical procedures posted here don't seem to work, but I'll be happy to run through any steps y'all suggest. I'll resign that it's been bricked if that's really whats happened.. but I'm not ready to throw this unit away yet.
Ask questions.. let me answer them. I know this team can get this phone working again.
Thanks y'all.
--Rob aka The Austin Slacker.
Have you tried the RC29 DREAIMG.nbh file?
http://forum.xda-developers.com/showpost.php?p=4593084&postcount=1
Roadmasta01 said:
Have you tried the RC29 DREAIMG.nbh file?
http://forum.xda-developers.com/showpost.php?p=4593084&postcount=1
Click to expand...
Click to collapse
bingo !
sounds like your friend tried to flash something he shouldn't have. or messed around with stuff he shouldn't.
as far as taking it to the store, and accepting their suggestion to "GIVE US YOUR MONEY!" that was a mistake.
the phone is likely fine, and maybe you'll buy it from him for cheap, then fix, resell/use.
good luck, should be easy.
The "press camera and power to get to bootloader" procedure. I've tried holding the Camera while pressing power over and over and all I get is the triangle. However if I press power and the "back" button (swooping arrow to the left), I'll get the bars screen, and a Gray screen telling me to press send to restore.... Which is all good, but there's no progress or any thing to indicate that i've done something by pressing the send button.(based on cell phone standards, I'm assuming "send" is the green "call" button.
Is this normal?
No yeah.. he gave me the G1.. its mine. I just need to fix the little bugger.. .. well.. then laugh at him
Ok.. one more day (well ok.. couple hours) of fiddling with this thing, and i'm begining to wonder if Microsoft was involved. I'm not able to get this poor G1 to do anything new. I tried using a different SD card, hoping perhaps the one I got with it was bad... no dice. camera + power doesn't do anything useful.
I can connect it to the PC.. but i can't see the data card that way. adb devices reads no output, so its not correctly attaching to the PC (tried Windows 7 32bit, and Windows XP 64bit).. There's gotta be a good way to force a known good image onto this silly thing.
Is it probable that the internal memory has gotten corrupt somehow? I know someone out there's got the golden suggestion, please do tell if you do. I'd really like to use this phone.
--Rob
If you can get into fast boot (the tri color screen) there are ways to flash it... try getting into your tri color, then plugging in the USB cable and see if it switches from Serial 0 to USB at the bottom, if so you are golden to flash using the fast boot method.
There are guides around on how exactly to do that, as well a couple places that you can download the official RUU that will do all the hard work for you!
gah.. nothing doing. I can hit Back and Home, and end up with the tri-color screen for about 1/5th of a second, then a gray screen saying:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press Send to restore manufacturer default, or press other keys to cancel.
At this point, the unit is dead. I can remove the battery, and continue on my little quest.. but hitting *any* key at all (including the Send key) will not produce any sort of output. I've tried pressing Send one time, then setting the phone down for a full hour (watched a netflix show) nothing. I can't power it off either w/o removing the battery.
I would throw in the towel.. but from all the research i've been doing, it seems as if this one is behaving in a manner in which other forum users havne't posted. Maybe by continuing to try options and post results, a positive outcome will come out, and someone else who has a G1 behaving this way will have an easier time.
... or y'all can tell me that its toast and to bugger off.. ha ha.. either way.. I continue to google. If you can think of anything, please toss it out.
OH!.. tried an RUU.. found one called. RhodiumSPLRelocker Looks promising.. but can't see the device when attached to the PC... yeah.. guess the phone has to have a functioning OS before that will happen...
You would want a Dream RUU... I looked around a bit and couldn't find one. Maybe someone has a quick link?
Double check that your SD card is formatted FAT32 and see if you can get ADB to see it when on that greay screen.
I've formatted the SD card in FAT32 multiple times.. I even questioned if my Windows 7 32bit would do it, and formatted it on a laptop running XP 64bit. adb doesn't seem to see it ever.
I don't get why I can't get it into fast boot. I've been looking on ebay for dream G1s with broken screens.. heh.. I guess i'm preparing for the worst. really sad, becasue this G1 was actually pretty well taken care of. My friend didn't do anything he shouldn't. HE woke up one morning and it was like this. He lives out in the country.. so he gets pretty spotty signal. I'm wondering if T-Mobile didn't push out an update, and it got interrupted by signal loss.
By the by... I've been doing all this work w/o a SIM card. Does that matter?
austinslacker said:
(based on cell phone standards, I'm assuming "send" is the green "call" button.
Click to expand...
Click to collapse
its not the green send button -- its the red end button
see below extracted from http://theunlockr.com/2009/07/05/how-to-unroot-your-t-mobile-g1/
Load the DreaIMG.nbh File
1. Download the Original DreaIMG.nbh file:
http://www.megaupload.com/?d=XXSQ0T7W
2. If the file downloaded above downloads as a .Zip file, please unzip it first then put the DreamIMG.nbh file that is inside on the SD card, NOT in any folder. (If you did Section I the phone is off still, take out the memory card, put it in the MicroSD adapter and plug it into your computer to transfer the file over, since your G1 won’t turn on right now if you did Section I above. Otherwise if you did not need to do Section I above, then you can just put it on the SD card normally using the usb cable and the phone).
3. Turn the phone off if it is on.
4. Turn on the phone by holding the Camera button and the End key until the bootloader screen turns on.
5. Hit the End key to start the update. DO NOT INTERUPT THIS PROCESS.
6. Once it is done, hit the trackball to restart the phone. You now are on the stock firmware RC29
austinslacker said:
The "press camera and power to get to bootloader" procedure. I've tried holding the Camera while pressing power over and over and all I get is the triangle. However if I press power and the "back" button (swooping arrow to the left), I'll get the bars screen, and a Gray screen telling me to press send to restore.... Which is all good, but there's no progress or any thing to indicate that i've done something by pressing the send button.(based on cell phone standards, I'm assuming "send" is the green "call" button.
Is this normal?
No yeah.. he gave me the G1.. its mine. I just need to fix the little bugger.. .. well.. then laugh at him
Click to expand...
Click to collapse
You mention that you can access fastboot by pressing the back button while turning it on, isn't that how the hero gets into fastboot? maybe your friend tried flashing a rom that was meant for the hero. if you have access to fastboot you should be able to flash a new image from there, just place the image file in the root of your card and follow the fastboot instructions
Also if fastboot isn't doing it for you have you tried adb? if you don't know what that is look it up I've seen a couple guides on how to do it and they are really detailed.
Im having the same problem, Im stuck in the recover triangle of death. Ive done the alt+w and reboot, the RC29 DREAIMG.nbh , the update.zip, camera+power, I cant get the gray screen to pop. Nothing, its brickkkkeeeddddd, FUBAR. There has got to be someway I can reload this G1. I wasnt trying to root it or anything. I was bowling and then it triangled on me. Anyone have any ideas at all on how to fix it?
Triangle of Death
I'm from Brazil, I can't take it to t-mobile to fix...
when i tried to root my G1 did the downgrade perfectly, the screen was just as it was suposed to be.
But in the recovery mode boot, appeared this triangle with an exclamation...
what do i do now???? help plz!
deftoneage12 said:
Im having the same problem, Im stuck in the recover triangle of death. Ive done the alt+w and reboot, the RC29 DREAIMG.nbh , the update.zip, camera+power, I cant get the gray screen to pop. Nothing, its brickkkkeeeddddd, FUBAR. There has got to be someway I can reload this G1. I wasnt trying to root it or anything. I was bowling and then it triangled on me. Anyone have any ideas at all on how to fix it?
Click to expand...
Click to collapse
Any one have any ideas? hell ill pay someone to fix it for me
The only idea I have is make'ing an goldcard so your sure your phone accepts the update (dreaimg)... other than that...
Sent from my HTC Dream G1 using the XDA mobile application powered by Tapatalk
Any chance the home button is stuck? I'm not 100%, but I think if you were to hold home, camera and power, the recovery would come out on top.
Home button is not stuck, and cant seem to figure out the CID of my SD card since my phone is unaccessable.
This is my third hard reset and the first 2 times I was not that peeved at all but this time around I am quite pissed at this phone! I was careful with what I am installing and it was after getting the latest TMO update. Btw, I have TMOUS and stock (newer one). Anyway, I was not even doing anything at all when my phone froze, I was simply going to turn off the alarm (I use SPB Time).
Anyway, I soft reseted and it is stuck at the Stick Together screen. Tried many times and no luck so I just thought, wth, just hard reset.
The first two times I hard reseted, it was automatic since I got a message on my phone but this time there was no message so I decided to use the volume buttons and the end key button. The first time I tried it, I ended up with the tricolor screen and nothing. No message about 'this will erase blah blah.' I tried again several hours later and it finally gave me the message about pressing the volUP button to proceed with hard reset so I did. And after just TWO seconds, I saw RESTORE COMPLETE, press volUP to boot so I did and NOTHING. I am still stuck at the Tmobile Stick Together screen after reboot!!! I did this three times (volUP, endkey, hard reset, volUP) and it was always fast. I don't remember it being that fast before.
Can someone please just tell me what I can do to just get it work again? Does this mean I just bricked this frickin' phone??? I have not flashed a ROM (except perhaps to do the TMOUS update). Can I still make this work?
(I don't know where to post this so I apologize if this is the wrong one. But I thought since a lot of people are flashing their roms in this thread, someone have seen something similar to mine and can help).
I love this phone but this is ridiculous.
things to try
k8sh said:
This is my third hard reset and the first 2 times I was not that peeved at all but this time around I am quite pissed at this phone! I was careful with what I am installing and it was after getting the latest TMO update. Btw, I have TMOUS and stock (newer one). Anyway, I was not even doing anything at all when my phone froze, I was simply going to turn off the alarm (I use SPB Time).
Anyway, I soft reseted and it is stuck at the Stick Together screen. Tried many times and no luck so I just thought, wth, just hard reset.
The first two times I hard reseted, it was automatic since I got a message on my phone but this time there was no message so I decided to use the volume buttons and the end key button. The first time I tried it, I ended up with the tricolor screen and nothing. No message about 'this will erase blah blah.' I tried again several hours later and it finally gave me the message about pressing the volUP button to proceed with hard reset so I did. And after just TWO seconds, I saw RESTORE COMPLETE, press volUP to boot so I did and NOTHING. I am still stuck at the Tmobile Stick Together screen after reboot!!! I did this three times (volUP, endkey, hard reset, volUP) and it was always fast. I don't remember it being that fast before.
Can someone please just tell me what I can do to just get it work again? Does this mean I just bricked this frickin' phone??? I have not flashed a ROM (except perhaps to do the TMOUS update). Can I still make this work?
(I don't know where to post this so I apologize if this is the wrong one. But I thought since a lot of people are flashing their roms in this thread, someone have seen something similar to mine and can help).
I love this phone but this is ridiculous.
Click to expand...
Click to collapse
Try removing your memory card and doing hard reset. If that doesnt work try removing both memory card and your sim card and doing a hard reset. If that doesnt work try loading an original stock LEOIMG.nbh file onto your memory card and flashing from your memory card.
BTW, should be BOTH up and down volume keys and power button to get to hard reset screen. Then volume up to restore.
Hope that helps.
fhaines
fhaines said:
Try removing your memory card and doing hard reset. If that doesnt work try removing both memory card and your sim card and doing a hard reset. If that doesnt work try loading an original stock LEOIMG.nbh file onto your memory card and flashing from your memory card.
BTW, should be BOTH up and down volume keys and power button to get to hard reset screen. Then volume up to restore.
Hope that helps.
fhaines
Click to expand...
Click to collapse
I did mean volume UP and DOWN. Anyway, I tried your suggestions but same result. Still stuck.
So I proceed as if I am updating to the newer T-Mobile version. I followed the steps posted here:
http://support.t-mobile.com/doc/tm54430.xml?
However, when it came to the part where I had to make sure I have active sync established, I actually could not tell as it shows on my PC that I am not connected but at this point I really have nothing to lose. However, that said, in bootloader mode on my phone I see USB when I connect the phone to PC and then it reverts to SERIAL when I disconnect. So I thought, what the heck, it seems to be connected. AND VOILA, I was able to flash using TMO's updated ROM (the one I had just before all these mishap). WHEW! As much as I hate hard resets, I'd take it over bricking.
Thank God for TMo's excellent instructions on that site. I tried reading the instructions for flashing here and I just could not understand all these SPL, HARDSPL2 crap.
If I have to do another hard reset after I set this all up again I am going to scream!!!