Ok.. So a friend of mine suddenly got a triangle with the exclamation mark picture on his phone. That's all it boots up to. So, he took it to T-mobile, they told him it's FUBAR, and sold him a new phone.
The fact that the thing boots to a recovery mode tells me that there's SOME way to un-FUBAR this phone. My friend is too technologically inadiquate to attempt to do any modifying, so I'm going to assume he was at whatever firmware level would hve been blasted out to T-mobile as of last Friday 01/15/2010.
If I boot the phone normally, it gives me the TriAngle. I pop open the keyboard and hit alt-L and the I get the Android System Recovery menu. at the bottom I get "E:CAn't open /cache/recovery/command"
I've spent all day bouncing around this forum, and many like it, downloaded all sorts of G1 fimwares trying to go back to RC29, RC28, 30, 33.. gah! The latest one I'm trying to update to is "signed-kila-ota-116143-prereq.TC4-RC19+RC28+RC29.zip" Which i rename to update.zip . I hit alt-L, select 'update from SD card' It goes through:
--Install from sdcard...
Finding update package...
Opening update package...
Verifying update package...
Installing update package....
Installation aborted.
That's it... no more log than that.
I've done the Alt-W, and Alt-S.. wiped cache partition. I think playing around with the recent firmwares might be fun, but I'd like to get this bad boy reset back to factory defaults. I've read the forums here on how to do that.. but all of the procedures fail.
I can get Windows 7 to recognize the phone, but I cannot access the sd card while it is in the phone. I've been transfering data to it by taking the sdcard out, and putting it into a known good SD card reader. I've formatted the sdcard to FAT16, and FAT32 quick and not quick.
Seriously.. why is this so complicated? Now I need some serious digging assistance. Is there an interface that will allow me to directly talk to this phone via the USB cable? How can I force an firmware onto it? Clearly something is functional, or I would get no I/O. How can I get this silly thing back to where it was? I know this thread seems like a redundant one, but as far as I can tell, its not. The typical procedures posted here don't seem to work, but I'll be happy to run through any steps y'all suggest. I'll resign that it's been bricked if that's really whats happened.. but I'm not ready to throw this unit away yet.
Ask questions.. let me answer them. I know this team can get this phone working again.
Thanks y'all.
--Rob aka The Austin Slacker.
Have you tried the RC29 DREAIMG.nbh file?
http://forum.xda-developers.com/showpost.php?p=4593084&postcount=1
Roadmasta01 said:
Have you tried the RC29 DREAIMG.nbh file?
http://forum.xda-developers.com/showpost.php?p=4593084&postcount=1
Click to expand...
Click to collapse
bingo !
sounds like your friend tried to flash something he shouldn't have. or messed around with stuff he shouldn't.
as far as taking it to the store, and accepting their suggestion to "GIVE US YOUR MONEY!" that was a mistake.
the phone is likely fine, and maybe you'll buy it from him for cheap, then fix, resell/use.
good luck, should be easy.
The "press camera and power to get to bootloader" procedure. I've tried holding the Camera while pressing power over and over and all I get is the triangle. However if I press power and the "back" button (swooping arrow to the left), I'll get the bars screen, and a Gray screen telling me to press send to restore.... Which is all good, but there's no progress or any thing to indicate that i've done something by pressing the send button.(based on cell phone standards, I'm assuming "send" is the green "call" button.
Is this normal?
No yeah.. he gave me the G1.. its mine. I just need to fix the little bugger.. .. well.. then laugh at him
Ok.. one more day (well ok.. couple hours) of fiddling with this thing, and i'm begining to wonder if Microsoft was involved. I'm not able to get this poor G1 to do anything new. I tried using a different SD card, hoping perhaps the one I got with it was bad... no dice. camera + power doesn't do anything useful.
I can connect it to the PC.. but i can't see the data card that way. adb devices reads no output, so its not correctly attaching to the PC (tried Windows 7 32bit, and Windows XP 64bit).. There's gotta be a good way to force a known good image onto this silly thing.
Is it probable that the internal memory has gotten corrupt somehow? I know someone out there's got the golden suggestion, please do tell if you do. I'd really like to use this phone.
--Rob
If you can get into fast boot (the tri color screen) there are ways to flash it... try getting into your tri color, then plugging in the USB cable and see if it switches from Serial 0 to USB at the bottom, if so you are golden to flash using the fast boot method.
There are guides around on how exactly to do that, as well a couple places that you can download the official RUU that will do all the hard work for you!
gah.. nothing doing. I can hit Back and Home, and end up with the tri-color screen for about 1/5th of a second, then a gray screen saying:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press Send to restore manufacturer default, or press other keys to cancel.
At this point, the unit is dead. I can remove the battery, and continue on my little quest.. but hitting *any* key at all (including the Send key) will not produce any sort of output. I've tried pressing Send one time, then setting the phone down for a full hour (watched a netflix show) nothing. I can't power it off either w/o removing the battery.
I would throw in the towel.. but from all the research i've been doing, it seems as if this one is behaving in a manner in which other forum users havne't posted. Maybe by continuing to try options and post results, a positive outcome will come out, and someone else who has a G1 behaving this way will have an easier time.
... or y'all can tell me that its toast and to bugger off.. ha ha.. either way.. I continue to google. If you can think of anything, please toss it out.
OH!.. tried an RUU.. found one called. RhodiumSPLRelocker Looks promising.. but can't see the device when attached to the PC... yeah.. guess the phone has to have a functioning OS before that will happen...
You would want a Dream RUU... I looked around a bit and couldn't find one. Maybe someone has a quick link?
Double check that your SD card is formatted FAT32 and see if you can get ADB to see it when on that greay screen.
I've formatted the SD card in FAT32 multiple times.. I even questioned if my Windows 7 32bit would do it, and formatted it on a laptop running XP 64bit. adb doesn't seem to see it ever.
I don't get why I can't get it into fast boot. I've been looking on ebay for dream G1s with broken screens.. heh.. I guess i'm preparing for the worst. really sad, becasue this G1 was actually pretty well taken care of. My friend didn't do anything he shouldn't. HE woke up one morning and it was like this. He lives out in the country.. so he gets pretty spotty signal. I'm wondering if T-Mobile didn't push out an update, and it got interrupted by signal loss.
By the by... I've been doing all this work w/o a SIM card. Does that matter?
austinslacker said:
(based on cell phone standards, I'm assuming "send" is the green "call" button.
Click to expand...
Click to collapse
its not the green send button -- its the red end button
see below extracted from http://theunlockr.com/2009/07/05/how-to-unroot-your-t-mobile-g1/
Load the DreaIMG.nbh File
1. Download the Original DreaIMG.nbh file:
http://www.megaupload.com/?d=XXSQ0T7W
2. If the file downloaded above downloads as a .Zip file, please unzip it first then put the DreamIMG.nbh file that is inside on the SD card, NOT in any folder. (If you did Section I the phone is off still, take out the memory card, put it in the MicroSD adapter and plug it into your computer to transfer the file over, since your G1 won’t turn on right now if you did Section I above. Otherwise if you did not need to do Section I above, then you can just put it on the SD card normally using the usb cable and the phone).
3. Turn the phone off if it is on.
4. Turn on the phone by holding the Camera button and the End key until the bootloader screen turns on.
5. Hit the End key to start the update. DO NOT INTERUPT THIS PROCESS.
6. Once it is done, hit the trackball to restart the phone. You now are on the stock firmware RC29
austinslacker said:
The "press camera and power to get to bootloader" procedure. I've tried holding the Camera while pressing power over and over and all I get is the triangle. However if I press power and the "back" button (swooping arrow to the left), I'll get the bars screen, and a Gray screen telling me to press send to restore.... Which is all good, but there's no progress or any thing to indicate that i've done something by pressing the send button.(based on cell phone standards, I'm assuming "send" is the green "call" button.
Is this normal?
No yeah.. he gave me the G1.. its mine. I just need to fix the little bugger.. .. well.. then laugh at him
Click to expand...
Click to collapse
You mention that you can access fastboot by pressing the back button while turning it on, isn't that how the hero gets into fastboot? maybe your friend tried flashing a rom that was meant for the hero. if you have access to fastboot you should be able to flash a new image from there, just place the image file in the root of your card and follow the fastboot instructions
Also if fastboot isn't doing it for you have you tried adb? if you don't know what that is look it up I've seen a couple guides on how to do it and they are really detailed.
Im having the same problem, Im stuck in the recover triangle of death. Ive done the alt+w and reboot, the RC29 DREAIMG.nbh , the update.zip, camera+power, I cant get the gray screen to pop. Nothing, its brickkkkeeeddddd, FUBAR. There has got to be someway I can reload this G1. I wasnt trying to root it or anything. I was bowling and then it triangled on me. Anyone have any ideas at all on how to fix it?
Triangle of Death
I'm from Brazil, I can't take it to t-mobile to fix...
when i tried to root my G1 did the downgrade perfectly, the screen was just as it was suposed to be.
But in the recovery mode boot, appeared this triangle with an exclamation...
what do i do now???? help plz!
deftoneage12 said:
Im having the same problem, Im stuck in the recover triangle of death. Ive done the alt+w and reboot, the RC29 DREAIMG.nbh , the update.zip, camera+power, I cant get the gray screen to pop. Nothing, its brickkkkeeeddddd, FUBAR. There has got to be someway I can reload this G1. I wasnt trying to root it or anything. I was bowling and then it triangled on me. Anyone have any ideas at all on how to fix it?
Click to expand...
Click to collapse
Any one have any ideas? hell ill pay someone to fix it for me
The only idea I have is make'ing an goldcard so your sure your phone accepts the update (dreaimg)... other than that...
Sent from my HTC Dream G1 using the XDA mobile application powered by Tapatalk
Any chance the home button is stuck? I'm not 100%, but I think if you were to hold home, camera and power, the recovery would come out on top.
Home button is not stuck, and cant seem to figure out the CID of my SD card since my phone is unaccessable.
Related
First off im sorry im adding another rooting post to these boards.
So i decided to root my 32B magic today copyed the recovery.img over and update file from the rooting wiki, loaded recovery mode then updated, but now my phone when turned on loads to the vodafone screen and freezes id left it for afew hrs but still no luck.
Here is what i know so far:
I am able to get to fastboot and fastboot usb
I cant however get to recovery mode by pressing menu+power
I can get to the recovery mode using the sdk\tools
my problem is that im sure the fix is relativly simple i.e. load some files onto sd and start again, but the problem is that i have no other way to load the files onto the sd card than through the phone and my knowledge of adb isnt that great although has improved greatly today lol.
Im not sure how correct i am on this, but would it be a possible fix to load say a rom update.zip onto the sd card and load that through recovery mode to bring it up? If that would fix it could i possible get help on the adb code needed to pass the file from computer to the phone through fastboot usb or recovery.
Thank you very much for your help
Ok i think i have figured how to push files to my sd card however whenever i try it come up saying Failed ( remote:signature verify fail)
ok well i managed to move Cyanogen's newest rom over and update to that but its still hanging up at the vodafone screen upon booting, im lost for ideas.
Please any help how ever small would be amazing right now.
please help is desperatly needed.
i am having the same issue.... and it seems NO ONE has a bloody answer to why it is failing
I successfully update to 32A and root. Then i tried to update to MT3G OTA rom and now i'm stuck at Vodafone screen. Need help or ideas and how to recover..
i had the same problem, what i did was that i found a sd card adapter and hooked it up to my computer, its pretty quick and less hassle
waacow said:
I successfully update to 32A and root. Then i tried to update to MT3G OTA rom and now i'm stuck at Vodafone screen. Need help or ideas and how to recover..
Click to expand...
Click to collapse
take out your battery and after a few seconds put it back in, before it powers up go into fastboot(back+power) and that should do it
I still have a pretty red splash screen and stucked.
neoxtian said:
take out your battery and after a few seconds put it back in, before it powers up go into fastboot(back+power) and that should do it
Click to expand...
Click to collapse
I have same problem, but your solution didn't work for me.
I did as follows.
#1. typed following command in terminal.(well, I'm using Mac)
Code:
fastboot-mac flash recovery recovery-RAv1.2.0G.img
#2. pulled battery off from phone.
#3. pluged USB cable to phone and also Mac.
#4. pressed (ENTER) in the terminal, then fastboot-mac said '< waiting for device >'.
#5. put the battery in while pressing (back)+(power)
#6. then, pretty red vodafone splash screen come up.
#7. In the terminal, it still said '< waiting for device >'. Nothing was changed.
#8. On the phone, pretty red splash screen was still there. Nothing was changed.
Those are all I have done many times for last 2 days.
But, it didn't work.
Please let me know if there is something I missed.
I tried and stuck in the exactly same problem as [robotician]. I have MT3G.
robotician said:
#5. put the battery in while pressing (back)+(power)
#6. then, pretty red vodafone splash screen come up.
#7. In the terminal, it still said '< waiting for device >'. Nothing was changed.
Click to expand...
Click to collapse
THe red vodafone should not come up. You have to hold the back key longer perhaps, because it's supposed to go into the fastboot screen with all sorts of text and three androids on skateboards at the bottom.
@Niaski
was your rom made for the 32B or the 32A?
They are very diferent phones and mixing the roms causes the issue you are seeing.
Reading the "How to root" thread here. I've rooted a few G1's and a MT3G in the past.
Anyways. I downgraded to RC29, downloaded Amon's recovery and Hard SPL.
Did the whole Telnetd, downloaded telnet from market and mount remount, flash yadda yadda as per stated.
Rebooted and applied the Hard SPL.
After that finished I rebooted and it just hangs on the G1 screen, Home/Power does nothing. Camera/Power does nothing. Trackball/Power just lights the LED up blue.
Will it live the rest of it's life as a door stop?
not being able to boot into anything is a brick but there have been many threads about people who have somehow reversed their brick so just search this forum and see if anything happends who knows it could happen. otherwise its a really shiny paper weight
Bummer. I'll search around a bit more and see if there might be a thread I missed. I don't want to dig into it and do the whole jtag crap since there is still a warranty on the phone.
This is the "How-to" thread I followed and has worked on every G1 I have rooted til this phone which is a brand new one from Tmo.
http://forum.xda-developers.com/showthread.php?t=442480
Searching more I have read about people not flashing a radio before the SPL and caused a brick. If that is true why doesn't it state this as a necessary step?
Flashing the Radio before the SPL is needed for DangerSPL (although I seem to recall a thread debating that - http://forum.xda-developers.com/showthread.php?t=655097 ), I didnt think it was needed for HardSPL, it sounds like a brick unfortunatly, but I am no expert.
It is thought that its safer to flash the SPL and radio ect via fastboot (see link above) , not that it helps to much now, but that is an old guide, it should be updated though
Yep. From what I have gathered is if you can't get into recovery (home+power) or fastboot (camera+power) and it hangs on the G1 boot screen. It's a brick.
-RotorDemon- said:
Yep. From what I have gathered is if you can't get into recovery (home+power) or fastboot (camera+power) and it hangs on the G1 boot screen. It's a brick.
Click to expand...
Click to collapse
its not a brick unless it doesn't turn on at all (depending on how you define the word "brick")
exact same thing happened to one of the G1 replacements my friend got sent to him...we sent it back and they sent him a new one
Nah it's not bricked, the HSpl isn't compatible with your ROM, try flashing he ROM again, or faulty ROM this happens a lot.
Howto fix:
1. Backup any files on your SD card that are valuable to you (you can copy them to your PC's hard drive)
2. Format your SD card to FAT32 ( put your SD in your PC)
Windows: Right-click on SD icon and select format
3. Download the RC29 / RC7 dreaimg.nbh file (don't rename it or your phone won't recognize it):
RC29 (US): http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod
RC7(Europe):http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod
4. Put the file you just downloaded onto your freshly formatted SD card (make sure it is named DREAIMG.nbh, the rc7 file downloads with .NBH which is wrong)
5. Turn your phone off.
6. Hold down the Camera button, and press the Power button until the bootloader starts.
Note: On some G1s it may require pressing the action button (trackball), while on others it may require pressing the power button.
7. Follow the on-screen instructions to flash the image.
8. When it's done, press the trackball.
9. Press the Call, Menu, and Power buttons at the same time to reboot. You may need to unplug your phone for this to work.
10. And you're done, your phone is in Manufacture default-settings.
If you want to flash a ROM follow a guide (start from the beginning)
Tell me if it worked or didn't worked!
Source: http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod
what tally said....
but on the one i described, just to let you know, i flashed the rc29 dreaimg.nbh like 15 times, it would never get off the G1 boot screen
tnpapadakos said:
what tally said....
but on the one i described, just to let you know, i flashed the rc29 dreaimg.nbh like 15 times, it would never get off the G1 boot screen
Click to expand...
Click to collapse
Try flashing the ROM again if you can go to the bootloader(Rainbow) screen try this:
1. take out the SD card
2. download this file ,open the folder and paste the dreaming.NBH file to the root of your SD card(use your pc or another phone to past this on your SD card).
2. you should get a gray screen once the card in placed back into the phone
3. then press power to start update
4. once the update is complete press the track ball then the rainbow(bootloader) screen should come back up,
5. pull out the battery and there you go your phone should work again
Note: If it didn't updated turn of your phone and turn it on by pressing (& holding) Power+Camera button.
Tell me if it worked
Lol, for some reason it double posted my previous post sorry.
He says in the first post Camera / Power dosent load the bootloader
vixsandlee said:
he says in the first post camera / power dosent load the bootloader
Click to expand...
Click to collapse
send it back
vixsandlee said:
He says in the first post Camera / Power dosent load the bootloader
Click to expand...
Click to collapse
Yes I know but if he connects it to he's PC and turns it off and on and then go to bootloader it will work.
tally114 said:
Yes I know but if he connects it to he's PC and turns it off and on and then go to bootloader it will work.
Click to expand...
Click to collapse
Interesting, I didnt know that.
Thanks for the info.
tally114 said:
Yes I know but if he connects it to he's PC and turns it off and on and then go to bootloader it will work.
Click to expand...
Click to collapse
Doesn't work either. Connected, disconnected, SD card in or out, SIM card in or out and any combination of that.
Logcat just sits and says "Waiting for device" while the phone just hangs on the G1 screen. So unless there is a different way to get into the bootloader besides using Camera+Power I'd like to know.
Camera+Power and Home+Power are unresponsive.
Well... it sounds like you've got yourself a fancy plastic brick, just remember for next time
1. Downgrade
2. Radio
3. Spl
-------------------------------------
Sent via the XDA Tapatalk App
Hi guys,
First off let me say that i have been*
googleing this for a couple of days and im not one who easily asks a question in a forum but this problem really bugs me...
I have a htc dream or a t- mobile g1 (call it whatever you want). I know this isn't the right place but i couldn't find any other place to ask...
When i press the power button of my devices i see the g1 logo followed by the android logo... Right after the android logo i should see the interface off my phone but it does not. All it is showing me is a black screen. The screen is turned on i can see the glow off it and know how the phone looks like turned off...
First thing i tried
Hard reset. I pressed the home button and the end button. After seeing the exlamation mark i hold alt and press L. Wipe everything (alt w, alt s) tried them all but after rebooting the phone... Black screen...
At this point im stuck because if a hard reset doesn't work then the phone is dead... I presumed but it turned out that i was wrong... If i can get in the bootloader or the rainbow colour *screen (camera + end) i should be able to get it working...
Second thing i tried is download all kinds off update.zip and tried them all and none of them worked... You would think that the update.zip provided by google (1.6) should work. Here's the strange part. It detects the update... Extracts the update... Verifies the update... And the moment it installs the update the installation gets aborted... No other warning
I have read about DREAIMG.nbh but that wont work for me because my sd card is not a gold card and i cant make it a gold card because i cant get in the freaking menu off my phone...
What happened to my phone? It belonged to my nephew of 14 and he wanted to update it to 2.2 without doing some research first so yeah i smacked his head...
Can someone help me with this?
Engin
enginsoysal said:
Hi guys,
First off let me say that i have been*
googleing this for a couple of days and im not one who easily asks a question in a forum but this problem really bugs me...
I have a htc dream or a t- mobile g1 (call it whatever you want). I know this isn't the right place but i couldn't find any other place to ask...
When i press the power button of my devices i see the g1 logo followed by the android logo... Right after the android logo i should see the interface off my phone but it does not. All it is showing me is a black screen. The screen is turned on i can see the glow off it and know how the phone looks like turned off...
First thing i tried
Hard reset. I pressed the home button and the end button. After seeing the exlamation mark i hold alt and press L. Wipe everything (alt w, alt s) tried them all but after rebooting the phone... Black screen...
At this point im stuck because if a hard reset doesn't work then the phone is dead... I presumed but it turned out that i was wrong... If i can get in the bootloader or the rainbow colour *screen (camera + end) i should be able to get it working...
Second thing i tried is download all kinds off update.zip and tried them all and none of them worked... You would think that the update.zip provided by google (1.6) should work. Here's the strange part. It detects the update... Extracts the update... Verifies the update... And the moment it installs the update the installation gets aborted... No other warning
I have read about DREAIMG.nbh but that wont work for me because my sd card is not a gold card and i cant make it a gold card because i cant get in the freaking menu off my phone...
What happened to my phone? It belonged to my nephew of 14 and he wanted to update it to 2.2 without doing some research first so yeah i smacked his head...
Can someone help me with this?
Engin
Click to expand...
Click to collapse
There's a G1 forum where you can ask.
Sent from my HTC Glacier using Tapatalk
This is HTC Magic forum.....
Can this please be moved to the correct place? Or do i need to create the same topic there?
original Post
Going Bald here. I have searched this forum and the more I am reading the more confused I am becoming.
After a partial update my Acer Iconia A 500 froze. I tried rebooting and it took me to the start up screen where the lock is and nothing. Frozen solid.
I got acer support and they told me to Hold the vol button while turning the power on for 3 seconds the turning the screen lock on off on off. I get a green robot with a yellow exclamation mark. I am guessing this is called bricked!
I purchased the Tablet at Best Buy in the USA and brought it home to Australia.
The Acer support wants me to send it in for repair and also says...quote "However, considering that your device has been flashed to the US firmware, there may be an issue with resetting the unit to Australian standards."
I have read about OTA and kernels Roms.... YIKES. Most say download the OTA for your tablet ( how do I know what one if I cant get into it)
Can some Guru here please explain in clear English what I should do. Where I should go. You guessed it total Newbie here. HELP
Thank you in advance
Answer from FLOATING FATMAN.....thank you
There are several things you can try.
First, on the right hand side of the device there's a little hole. This is a reset hole (but doesn't wipe RAM). Try pressing this. You might have to reset a couple of times. If that doesn't help, read further.
Next, the step they describe is to force a wipe of the device. But it depends which volume button you pressed. With the device in landscape mode, it needs to be the side of the rocker furthest from the power button. Hold both down, then when you get the text, release the (I think) power button only, and toggle the orientation lock a few times.
If THAT doesn't work, contact the user sc2k on these boards via PM and he may be able to help you recover your tablet.
Question. When you tried to update your ROM, was it with an official OTA? And did you use Clockworkmod? If you used CWM, did you use the custom one in the A500 section, or the one from the market. The one on the market WILL BRICK YOUR TABLET.
My answer
Tried the reset, tried the power button. To answer the question.. The update flashed up on the screen so I thought it was a normal update. ummm Clockworkmod???? I havent updated from the market. Didnt know you could.
I am totally lost and ignorant here. SC2K will you please help me.
Thank you
ClockworkMod is a recovery menu for rooted roms.If you have'nt rooted then no need to worry about that.Ok power off,hold the volume button down from the left side,turn on your tab while holding down the volume button until you see small text pop up in the top,left corner,press the volume button again to wipe the tab completely(total reset)the pin hole on the side of your tab does the same thing.If this doesnt work,turn off the tab and plug in the usb cable to the tab and connect to your computer,your computer will try to install the driver,you might have to search for the driver on the acer site,then after it installs,you should be able to access your sdcard.You will need to search for the update or fix,not sure what tool is used for acer.
Is there anymore help out there. I dont want to download anything until I know for sure exactly what Im doing. I hate this tablet!
sassybees said:
Is there anymore help out there. I dont want to download anything until I know for sure exactly what Im doing. I hate this tablet!
Click to expand...
Click to collapse
OK, let's take this a step at a time. At the very least, we should be able to get the tab functioning again for you.
First, you're going to need a new ROM. I don't know what region Australia is, but at this point I don't think is really very important, so for now I suggest you flash am international ROM. We can worry about the region later.]
Download this file: http://vache-android.com/v1/download.php?fileID=75
This file is NOT encrypted in any way. Extract the update.zip from this file.
Now, you need a microSD card. Sometimes these cars have trouble reading (this often causes the yellow exclamation point), so you might want to format it first (format it to FAT filesystem, not NTFS). If possible, do this in an Android phone.
Copy the update.zip to the card. Must be in the root of the card.
Put the card into the A500, then boot into recovery (Hold down power and volume down, the one closes to the power button in landscape). Keep BOTH of these held down until you see a few lines of text in the top left of the screen. Once that is visible, release the buttons and the device should update.
At this point you should have a working tablet with an international ROM.
i had the same problem with sassybees.
i've tried to download the file but the page is locked...
I have download the update.zip full package but i just don't know which version. I'm a malaysian. Is it need a specific version for countries? I had tried the 4.010.22_COM_GEN1 and the 4.010.40_COM_GEN1 but it seems not working cause when updating, the loading bar stops about 80% and the gear animation stop rotating. The tablet restart and freeze at the android text loading screen again.
I'm so confuse about cwm or other things.. i just need a simple steps to get back to original android system.
How can i solve this problem. My acer tab is useless if it just showing android loading text forever...
The steps really don't get any simpler than the ones I've already given...
Have you tried different SD cards? I've already mentioned these are a common point of update failure.
yeah... i had tried 2 sd card... formatted wit fat system..
just wondering which version i must use? i'm searching in the dev section and found so many version.
the link u had given is somehow locked.. how can i access it?
thelock_bp said:
yeah... i had tried 2 sd card... formatted wit fat system..
just wondering which version i must use? i'm searching in the dev section and found so many version.
the link u had given is somehow locked.. how can i access it?
Click to expand...
Click to collapse
That link works fine for me. Right click it and choose "Save As..."
As for the SD card, have you formatted it in a PC or an Android phone? Better to do the latter if you can. As for the version you need to use, what was your current ROM? There are plenty of threads in the dev section describing what the versions are...
Hi Floating Fat Man
Sorry about the delay in answering. ( Time difference).
We are having issues with the only SD card we have. ( super expensive here) We also have the Nokia N8 android phone but no where can we find how to format the SD card ( we can format the phone but not the SD card ).We managed to get it to show on the PC and we can format but to a generic format and not the FAT filesystem. I know the Nokia N8 android is a rare phone in the USA cos all the phone shops were swooning over it and saying WOW, we dont have that. So help on formatting the SD card is proving hard to come by. Do you have any suggestions. Oh we copied the file you mentioned to the root on the generic formatted SD card and again got the yellow exclamation mark which was no surprise. I know I have bricked the tablet but I will be using it as a real brick very soon as it goes out the window LOL
Acer support has suggested I send it in for repair and that may be the only option left if we cant get this SD card up and running
I thank you for your help, I certainly have learned alot so far and I have a feeling its only the tip of the iceberg.
Thanks again
Your PC should give you an option to format the card to FAT32, which is the right format. Alternatively, a link to a format tool been posted on these sections recently in one of the many threads discussing the same issues, but I don't have a link handy, sorry.
Not sure what the heck happened to my device. I was using it when it just froze up outta nowhere. I tried resetting it a couple times but it wouldnt get past the android screen. Hard Reset, nothing. So I tried going into APX mode, power+vol up(idk why) then, it wouldnt get past the 'Acer' screen after that. So I let it charge overnight now it doesn't show anything at all. The power button does light up, but thats it. what the heck just happened?
NOTE: I lent out my sdcard with the update.zip in it. would putting my sdcard back in fix the problem or is it bigger than that?
is this thread a possible solution to my problem? problems seem similiar
http://forum.xda-developers.com/showthread.php?t=1874345
can someone please help me find out what happened with this, I really dont wanna call Acer n send it in if I can fix the problem myself
500tab said:
Not sure what the heck happened to my device. I was using it when it just froze up outta nowhere. I tried resetting it a couple times but it wouldnt get past the android screen. Hard Reset, nothing. So I tried going into APX mode, power+vol up(idk why) then, it wouldnt get past the 'Acer' screen after that. So I let it charge overnight now it doesn't show anything at all. The power button does light up, but thats it. what the heck just happened?
NOTE: I lent out my sdcard with the update.zip in it. would putting my sdcard back in fix the problem or is it bigger than that?
is this thread a possible solution to my problem? problems seem similiar
http://forum.xda-developers.com/showthread.php?t=1874345
can someone please help me find out what happened with this, I really dont wanna call Acer n send it in if I can fix the problem myself
Click to expand...
Click to collapse
Eh, well, need to know the condition of the tab. Sounds like it is stuck in APX mode. (Black display, white PWR light). Is this the case?
Generally, you might be able to PWR down, by press and hold the pwr button for several seconds. Then try to boot it normally.
Oh, BTW, Pwr and Vol+ is not how to get it to APX. That usually gets the stock bootloader which really isn't much of anything unless you have an update.zip on your ext sd card.
Were you completely stock? (not rooted or custom rom)
MD
Yes that's the condition, black screen white pwr light. It is rooted, thats it. Running ICS 4.0. I wont be able to get my sd card until wednesday so if I need that update.zip file I'll have to wait a few more days. Its completely off right now, I tried powering on and off a few times and I got nothing just a blank screen. Im unsure, what to try next??
500tab said:
Yes that's the condition, black screen white pwr light. It is rooted, thats it. Running ICS 4.0. I wont be able to get my sd card until wednesday so if I need that update.zip file I'll have to wait a few more days. Its completely off right now, I tried powering on and off a few times and I got nothing just a blank screen. Im unsure, what to try next??
Click to expand...
Click to collapse
Yeah, you're going to need an SD card. And make sure the tab is charged.
In the meantime, you can try a couple things just to see it you can get a different response. However, understand this.
1. You can probably forget any personal data that's stored on it. Photos, downloads, music, etc. Just to prepare you.
2. You probably have a corrupted bootloader partition. How it happens, with a normally functioning tab, nobody really knows.
You can try doing a data wipe. Usually we would wait till you get an SD card, but I'm curious if you can get anything on the display. To do this, with the tablet off, Press and hold PWR, while at the same time, continiously cycle your rotation lock left and right, quickly until you see "erasing user data" or something similar on the display.
Another thing, manually put it into APX mode. This involves using a paper clip, and press and hold the "reset" button near the USB port, then press and hold PWR. Count to 4 and release PWR, and 1 second later release the paperclip. Then plug your tablet into the PC, and see if the PC loads the drivers for it. You should already have installed the Acer USB drivers. If not, get them from the Acer site.
Understand, your chances of getting it going again, are less than 50/50. But, we all will give it a shot.
MD
This is exactly the situation I'm in... Black screen, White power light...
I was in the middle of an app, when tablet rebooted, wouldn't boot back up..
I was able to get into CWM recovery... investigated, and found that /system wouldn't mount... So, I was prepared to re-flash, so I first went to do a nandroid backup of my data folder... I also had an old nandroid backup, so I decided to restore that... After I did that, I couldn't even get into recovery anymore...
I've tried setting my tablet into apx mode, and trying to flash, but they always seem to freeze at "uploading image" (both with afterota unbrick and blackthund3r's tool)
Now, blackthund3r's tool will actually get the acer logo to show up, with "Entering download mode...", so that leads me to think the tablet isn't completely shot? It just gets stuck during the upload image...
Tried the erasing data as suggested by MD, but no luck, just black screen...
What is the sdcard method that you are speaking of? Is there anything else I can try?
Thanks in advance
---------
Edit:
Tried placing update.zip on sdcard for flashing, tried turning on the tablet with volume down...No joy
Hopefully someone has some other ideas for me? Thanks again in advance.
---------
Edit 2:
After a day of searching, finally came across this post.
Fixed and saved my tablet... Whew!