My phone start dialing number 2 while talking or turn on the phone. randomly. I don't know why it keep dialing the number two. Anyone ever have that problem or have solution to fix it. I believe it start happen ever since i left my phone in car for cuople hours in cold weather. Plz help if u have answer... I thank you
either you are leaving your screen on and pushing 2 with your ear or face...or hand/finger...
or it's a ghost.
I am having the same problem
I notcied my phone started dialing the number two constanly when the screen is on. Also when I am on the phone. If I try to dial the number 2 from the keyboard which is also the letter U neither works. Anybody has any ideas?? Please help. I put the tmobile stock shipped rom back on the phone and still the same problem.
Related
Ok, it's tarted 2 days ago, suddenly my new exec screen going to blue (Like PC)??? just blue color (Sometimes white and black stripes) and hung, so I just restart it. But today, is terrible,its happend 6 times. Tonight the worst thing happend, blue screen come again but this time with soft reset, not help at all. Every time I soft reset the splash screen comes, and then that blue screen again. It happend about 5 times, the machine finally start but can't read my sd card and I try to do soft reset but screen goes and never come back. My exec didn't start at all. I tried to release the battery, leave for few minutes and put it back try to start it, nothing happend... now my exec has die.
Anyone please help me and advice please,
What I did just cook ext ROM (So it have autoconfig for my country's operator, and upgrade the radio to 1.14.10 from T-Mobile, like I did to my alpine but it have no problem until I sold it)
Whoa... help me bro...
Thanks in advanced
Finally it's start but never reach windows screen, the blue screen appears again.
And I remember, the strange thing, my IMEI that I read from device properties is: 355195002465655
But, the IMEI at back body,(Under the battery) : 355195000360361
Why?And what happen?
guess u have the same probs as some others
http://forum.xda-developers.com/showthread.php?t=291986
oops:
saw u r already i that post.......
OK, I've got the same problems as you did. I was so upset with the device that I hit it on my lap (with the battery clip side hitting my lap) and then put the battery back on. Then it turned on! So everytime I have this problem I just hit the battery clip side and it turns on like 70 percent of the time. I just realized the SD card is on that side...hmmm..must be something to do with SD. I'm pretty sure someday it would just stop working at all if I keep doing this.
I don't advise anyone doing this but so far it works for me. I still have problems waking it up though. I really think the mainboard is messed up so I'm trying to get a mainboard, even a broken miniusb mainboard just to test it out. I opened mine up to the last screw and no loose connections noted. So if anyone has a mainboard then can sell me PM me.
If you still have warranty on the device, I advise you to send it in for warranty repair. It seems to only get worst and not better. Goodluck, hopefully we can find a solution for this. If I do get a mainboard. I'll let you know if that fixed it.
Hmm, I've guess it, I think the pprob is mainboard. I'll send it for warranty, (But I bought it in other city not in my own city) So i'll have to send it then on friday this week i'll go to that store to check arround and maybe choose the best product. I'll give the update then.
Anyway someone can give a advice to choose the mainboard?
Thanks in advanced.
bump..we need help..Is it a mainboard or coaxial cable problem? Please advise..
OK, Problem found.. Thanks Corneluis...It is a problem with the voltage control on the mainboard! Anybody has a workaround for this?
SOLUTION FOUND!!! At least for my Jasjar. Thanks, cornelius about the info on faulty voltage control which causes the Bulverde CPU to hang and give funny lines and colors to the screen. The solution is to install Pocket Hack Master and disable the Device CPU scaling in settings and set the speed to 312mhz for standby and before you turn it off. Now you can always clock it to 520 when needed but before you turn it off or close the screen make sure the speed is only 312mhz.
This has worked for me for more than 24 hours without any sngle hang.
Hello,
I need some help diagnosing a dialer problem. I installed the Jimmy98's Dialer on my wing and it looks great. However, it has problems displaying the number as you dial it.? It seems very slow? I will dial a number and the number display screen will only show the first number, and that is it, even though when I press call it dialed the entire number?
Has anyoneelse had this problem?
Also, is there a way to make my ok button close my programs completely? So that they don't steal all my resources?
Thanks for your time. I sure wish the wing had as many resources as the MDA. I had my MDA setup perfectly it was just too slow and had a horrible camera. The wings hardware is excellent I just need to get her dialed in.
Do a soft reset and try again. It worked for me. The only problem Im having now is after the 5th number the rest of the numbers are cut in half. I might go back to my earlier skin.
wordizbond007 said:
Do a soft reset and try again. It worked for me. The only problem Im having now is after the 5th number the rest of the numbers are cut in half. I might go back to my earlier skin.
Click to expand...
Click to collapse
thats the same problem i had so i just went with the htc dialer skin
when i touched the screen using my finger thumb in certain area of touch screen(middle), the start menu automatically drop down
i tried my friend's unit as well, also got this problem. anyone got this problem?
Yes, i have to this problem!
how u gonna solve it? seem like this model got this problem...just it seldom happen or frequently happen
I've the same problem too! But I've send it to HTC care (I'm in HK) to repair two times. First time they change the mother broad but the problem's still there; then I send it back the second time, they change the screen as well.
I've got it back for 3 days and the start up menu didn't pop up itself. Hope it won't happen again.....
I have been experiencing the same problem for some time now.
I've had this device for about 5 months and I have been treating it very nice.
Whenever I touch a certain area of the screen (which I haven't been able to figure out yet), the Start Menu pops out, which is very annoying, to say the last. It especially drives me nuts when trying to compose something using CooTek's TouchPal.
All in all, I do not know whether this is a hardware problem or not. I'm not very sure this is covered by warranty...
same problem here, touch screen changed 2 times by htc
i take to service center, they help me changed the motherboard as well but the problem still there...i think need them to help me change the screen as well...
second changed the lcd touch screen, still got that problem but less already
happen once a day sometimes 2 days once
anyone what the problem?
Hello. I have got two EU HD2s and problems with one of them. If I start a phone call with one of them on Sense builds the phone seems to 'freeze'. I can end the call by using the end call button but the screen stays black and the buttons stay illuminated.
There is no way to wake up the phone again and i need to pull the battery. Has anyone else had such problems and got a solution for me?
Edit: I just had an idea. Maybe the proximity sensor is the problem. How can i find out when it is toggled?
Edit2: installed a proximity app and its perma reporting 0,0cm. I will open the phone and see if something is wrong.
Ultimaex said:
Hello. I have got two EU HD2s and problems with one of them. If I start a phone call with one of them on Sense builds the phone seems to 'freeze'. I can end the call by using the end call button but the screen stays black and the buttons stay illuminated.
There is no way to wake up the phone again and i need to pull the battery. Has anyone else had such problems and got a solution for me?
Edit: I just had an idea. Maybe the proximity sensor is the problem. How can i find out when it is toggled?
Edit2: installed a proximity app and its perma reporting 0,0cm. I will open the phone and see if something is wrong.
Click to expand...
Click to collapse
Might be something wrong with the actual installation or the ROM itself. Try another ROM or re install.
This ones a bit strange but ill try to explain as best as i can...
Got my phone last week - rooted, unlocked the bootloader and reflashed within about 10 mins or so - you can't not can you...its what they were made for....anyway, im not sure what's caused it to happen but in the last few days when i dial a number as soon as the number is dialled the screen goes blank (but working in the background as i can hear it ringing....the other persons answers, and then when i want to hang up i cant get the screen go come alive again) unless the other person hangs up and then it does. Ive tried another image but its the same and ive just upgraded the phone radio firmware to the 4.2.2 version but i makes no difference....anyone else had this or is it just me?
Cheers to anyone that has a clue....
ComfySofa said:
This ones a bit strange but ill try to explain as best as i can...
Got my phone last week - rooted, unlocked the bootloader and reflashed within about 10 mins or so - you can't not can you...its what they were made for....anyway, im not sure what's caused it to happen but in the last few days when i dial a number as soon as the number is dialled the screen goes blank (but working in the background as i can hear it ringing....the other persons answers, and then when i want to hang up i cant get the screen go come alive again) unless the other person hangs up and then it does. Ive tried another image but its the same and ive just upgraded the phone radio firmware to the 4.2.2 version but i makes no difference....anyone else had this or is it just me?
Cheers to anyone that has a clue....
Click to expand...
Click to collapse
Have you check to see if anything is blocking the Proximity censor (top left corner)? The Screen Protectors often do this if they are in the way...
Otherwise the Prox Censor is fudge.. its the only thing that will cause the phone screen to turn off when a call is in progress (this is so your face doesnt press buttons)
UberSlackr said:
Have you check to see if anything is blocking the Proximity censor (top left corner)? The Screen Protectors often do this if they are in the way...
Otherwise the Prox Censor is fudge.. its the only thing that will cause the phone screen to turn off when a call is in progress (this is so your face doesnt press buttons)
Click to expand...
Click to collapse
that was it! it was the LCD cover - peeled that off and its now working. Thanks very much for that!! Case Closed.