Wing Dialer problem and close programs button - Wing, P4350 General

Hello,
I need some help diagnosing a dialer problem. I installed the Jimmy98's Dialer on my wing and it looks great. However, it has problems displaying the number as you dial it.? It seems very slow? I will dial a number and the number display screen will only show the first number, and that is it, even though when I press call it dialed the entire number?
Has anyoneelse had this problem?
Also, is there a way to make my ok button close my programs completely? So that they don't steal all my resources?
Thanks for your time. I sure wish the wing had as many resources as the MDA. I had my MDA setup perfectly it was just too slow and had a horrible camera. The wings hardware is excellent I just need to get her dialed in.

Do a soft reset and try again. It worked for me. The only problem Im having now is after the 5th number the rest of the numbers are cut in half. I might go back to my earlier skin.

wordizbond007 said:
Do a soft reset and try again. It worked for me. The only problem Im having now is after the 5th number the rest of the numbers are cut in half. I might go back to my earlier skin.
Click to expand...
Click to collapse
thats the same problem i had so i just went with the htc dialer skin

Related

Phone dialer not showing...

I'm able to make and receive calls but the dialer screen isn't showing. I've tried it in the different install modes but nothing changes.
Any suggestions?
Sometimes happens on my XDA Exec. A soft reset always brings it back to life. No idea why it happens.
The only thing that seems to work is taking the battery out... is that classed as a soft reset?
I would imagine it does the exact same thing. Try and use the 'reset' hole at the back though, saves you the hassle of taking the cover off (which also look quite flimsy).
Thanks - strange one this.
Are there any alternative phone dialers that I could install?
Cheers

my phone pad wont load or work?

Hi I have noticed today
My text phone pad doesn't work? anyone know why this is? I had got used to it and now i cant get it loading!
What do i do?
This problem that you are experiencing with PhonePad is the same one we were experiencing with the Magician. The problem is that the SIP and the Today plugins share the some same resources. With a lot of Today Plugins (or an insulting one), you will not be able to change your SIP other than to Keyboard.
You can try disabling the Today Plugins one by one, trying to load the Phone Pad in between. That way you can find which is the insulting plug-in. Mine is the Resco Explorer plug-in. You can re-enable the insulting plugin once you load PhonePad and they will then work.#
Sometimes a soft reset and changing the SIP immediately after also solves the problem.
Dont know what the problem was but, its sorted.
without changing anything I just opened programs and tried to run the pad in there now it works well.
now just to try tomtom5 so far no one reported any problems a good thing!
OK it has gone again and it is not the today items and I have not installed anything yet,
any ideas what it could be or how i can track it?
Whats the phone pad anyway...
the pad is the like phone pad which comes up so you can enter text.
I have just reset the phone to factory standards and the pad works unit it starts to install stuff then it just stops.
I have removed all the stuff it will let me and still it wont work. I have to get this working...
Has no one else got this problem?
rom: 1.0.9.25wwe
OK this is odd I have removed all programs on the PPC and started nothing and it doesn't work, removed the sim and it does! OH! I need the sim.
oh and the JAMin runs much faster without the sim?? OK so as I do this I am performing a hard reset without the sim, the phone is clever its telling me there is no sim! "I know this!"
I am sure it is something to with a CAB file that installs when you first boot or after a hard reset. or it may be my sim? after all its working without my sim.
Ok hard reset done, without the sim it is working fine now time to put the sim in.............................................
OK its either the sim or the stupid text that tells me what area I am in. how do i turn the area notification off?
ok a way around it should you ever have this problem.
put the phone into flight mode and soft restart, with it still in flight mode load you sms or what ever and open the key pad, then turn off flight mode and you will see your key pad.
PS it will screw up after a soft reset so you will need to do the above again but a solution for the short term.
Must be your sim card...
My Jamin doesn't have this problem (Cingular)
Just traded Dopod 700 (Blue Angel) for the sleek and tiny Dopod 818 Pro. Keep hearing about this phonepad SIP, but don't seem to have one on my phone. I have the Traditional Chinese ROM, which is ok, but would love a phonepad... Any ideas what's up with it not being on the device?
Thanks,
Travis
Heya,
used to have this problem too until i read a solution from a thread here.
goto "HKEY_CURRENT_USER\ControlPanel\SIP" in registry
under "DefaulfIM"
Change this value to "{51A2CB38-154E-4C92-A625-A83871C99EC2}"
Thereafter everytime you soft reset, phonepad will load up automatically and it will function every time you need it to... hope this helps
thescum said:
Heya,
used to have this problem too until i read a solution from a thread here.
goto "HKEY_CURRENT_USER\ControlPanel\SIP" in registry
under "DefaulfIM"
Change this value to "{51A2CB38-154E-4C92-A625-A83871C99EC2}"
Thereafter everytime you soft reset, phonepad will load up automatically and it will function every time you need it to... hope this helps
Click to expand...
Click to collapse
FANTASTIC!! This worked great BUT i had to input it in lower case for it to work.

Phone Problems - please help...

Randomnly when I press the green phone button or select Phone from my Start menu, I do not get the keypad, instead I just get a black box on the screen. They keys are "on" the screen - ie I can dial a number by guessing where the keys should be displayed, but unfortunately this is no good!! Any suggestions?
I have a similar problem, sometimes I get nothing no phone pad, just the today screen. I did a soft reset and it works again try doing that and see what happens? Do you have any phone apps that might be confilcting with the OEM phone apps?
Yup, a soft reset fixes it. It occurs approx after 10times of using the phone (although I havent actually counted) after a soft reset
Which ROM's are you guys running? Is it Helmi's 1.1?
no, i am completely standard on a UK O2 Rom
using O2 standard ROM with radio 1.04.xx, I just got it though. So I'm still just trying to figure out the device before I start tweaking it. SuperCarl, I don't know what to tell you, I soft reset mine and all was fine. Do you have any dial-pad skins that you are using maybe?
Harry Tuttle said:
using O2 standard ROM with radio 1.04.xx, I just got it though. So I'm still just trying to figure out the device before I start tweaking it. SuperCarl, I don't know what to tell you, I soft reset mine and all was fine. Do you have any dial-pad skins that you are using maybe?
Click to expand...
Click to collapse
soft reset alleviates the problem, but it recurs.
I am not using a dial pad skin (unless one is bundled with o2)

Wing Problem

My phone start dialing number 2 while talking or turn on the phone. randomly. I don't know why it keep dialing the number two. Anyone ever have that problem or have solution to fix it. I believe it start happen ever since i left my phone in car for cuople hours in cold weather. Plz help if u have answer... I thank you
either you are leaving your screen on and pushing 2 with your ear or face...or hand/finger...
or it's a ghost.
I am having the same problem
I notcied my phone started dialing the number two constanly when the screen is on. Also when I am on the phone. If I try to dial the number 2 from the keyboard which is also the letter U neither works. Anybody has any ideas?? Please help. I put the tmobile stock shipped rom back on the phone and still the same problem.

My Dialer is Gone?

OK, so i have a Treo Pro and I am running MD2 at 96dpi I have had this installed for over a week and today when I picked up my phone I couldnt get the dialer to come up. However, if I hold down the send key it will dial the person that is last in my history. I have hard reset the phone twice now and still cannot get the dialer to pop up, and it constantly notifies me that I have voicemails (at least twice a minute). What should I do? Do you think a dialer program would help out?
If you did a HARD reset and the dialer is not showing then there is something wrong with your device. If there is a software problem however then a SOFT reset might not fix it.
Try a real HARD reset to see if your problem is fixed.
Reset > Hold RED Button and follow the on-screen instructions.
Note: You will lose all data that's on your device!
[email protected] said:
OK, so i have a Treo Pro and I am running MD2 at 96dpi I have had this installed for over a week and today when I picked up my phone I couldnt get the dialer to come up. However, if I hold down the send key it will dial the person that is last in my history. I have hard reset the phone twice now and still cannot get the dialer to pop up, and it constantly notifies me that I have voicemails (at least twice a minute). What should I do? Do you think a dialer program would help out?
Click to expand...
Click to collapse
mine did that yesterday, a hard reset fixed it. Follow the directions in this thread
Problem Fixed!!! after HARDresetting a few times and eliminating programs one by one I have discovered that it was the updated res pack in the m2d for treo pro thread that caused the dialer issue so i just used the old pack an everthing works fine now. Thanks for everyones input.

Categories

Resources