How can i set up Auto Disconnect GPRS in cruise?
i need email service but i want that the battery has better autonomy.
thanks
Get Schap's Advanced Configuration Tool. Click "Menu", select "Connection Settings" - there is a "Disconnect after :" option there which will do just as it says for GPRS, 3G and HSDPA connections...
benzo8 said:
Get Schap's Advanced Configuration Tool. Click "Menu", select "Connection Settings" - there is a "Disconnect after :" option there which will do just as it says for GPRS, 3G and HSDPA connections...
Click to expand...
Click to collapse
thanks a lot..!!!
Related
how do you get mini opera to work on edge? i have that work on mu old sony k850i but i can't get it work on x1.
can someone help?
can someone advise?
What network provider you're subscribed to?
network provider: Tmobile USA
i just downloaded opera mini and i got it to work. i'm on tmobile usa as well. have you checked your connection settings?
how do i check my connection setting? this is my 1st wm device.
thank you
there are 2 things i can think of that would help. first check your network settings. if they aren't configured:
start> settings> connections tab> connections> advanced tab> select networks> edit
in the modem tab, click edit again and change your access point name to epc.tmobile.com and leave user, pass, and domain blank.
next go under the proxy settings and put a check in the 'this connects to the internet' box and leave 'this network uses a proxy...' box blank.
if this still doesn't work
start> programs> java> menu> network parameters
and select the connection you just set up from the drop-down box.
hope this helps
oh almost forgot... your device may need a soft reset after you configure your new connection
figurine said:
there are 2 things i can think of that would help. first check your network settings. if they aren't configured:
start> settings> connections tab> connections> advanced tab> select networks> edit
in the modem tab, click edit again and change your access point name to epc.tmobile.com and leave user, pass, and domain blank.
next go under the proxy settings and put a check in the 'this connects to the internet' box and leave 'this network uses a proxy...' box blank.
if this still doesn't work
start> programs> java> menu> network parameters
and select the connection you just set up from the drop-down box.
hope this helps
Click to expand...
Click to collapse
start> settings> connections tab> connections> advanced tab> select networks> edit
which network should select and edit?
i have:
t mobile mms
t mobile data
my work network
my ISP
what i've done was create one named 't-zones' since that's how it was on my n95. i have tzones selected in both boxes under the advance tab.
thank you thank you. it works!
thanks a lot!
not a problem. i aim to please... and to become more than just a junior member lol. do you have picture message problems where you only receive super tiny pictures? i did. you may want to fix that
do you set up gmail to your phone?
yup i sure do. needing help?
well.. my place doesn;t really have 3G network so i use t zone to push my gmail on my old k850i.
how do i do that on this one without turn on the wifi?
well, if you already have your gmail setup on your mobile:
start> messaging> menu> tools> options
click on your gmail account and then 'edit account setup' and click next 4 times until you come to a screen that says 'outgoing (smtp) mail server' and then click 'advanced server settings at the bottom. and then just select the connection you set up earlier
one more q. do you sign up data plan?
i only have the cheap t-zones addon. it was like 5.99 a month at the time... and i live in chattanooga so i couldn't use 3g even if i could afford it. atleast i have edge though
hahha same here. i only have cheap t zone.
so.. do you get to receive hotmail when the wifi is off?
i don't use hotmail but i suppose if it's like gmail then it should work
hello everyone,
I have a simple question, can i set my device to connect using wifi automatically when i run an internet application instead of going to the gprs, i tried to play with the connection setting but no luck.
regards
Hi!
I have managed this problem by defining double keypress to "backspace" key to turn bluetooth on/off and triple keypress to turn wifi on/off with AE Button Plus. Very handy tool! http://ae.inc.ru/aebplus.php
I had always assumed that any WiFi connection took automatic priority over GPRS?
On my HD and automatically :
- WiFi takes priority over GPRS/3G
- USB (ActivSync) takes priority over GPRS/3G and Wifi (which is automatically disabled, BTW)
- If neither USB nor WiFi are available, GPRS/3G is used.
Tested with IE, Opera, Mail and Weather.
Coude said:
On my HD and automatically :
- WiFi takes priority over GPRS/3G
- USB (ActivSync) takes priority over GPRS/3G and Wifi (which is automatically disabled, BTW)
- If neither USB nor WiFi are available, GPRS/3G is used.
Tested with IE, Opera, Mail and Weather.
Click to expand...
Click to collapse
How did you manage to get that set up?
Coude said:
On my HD and automatically :
- WiFi takes priority over GPRS/3G
- USB (ActivSync) takes priority over GPRS/3G and Wifi (which is automatically disabled, BTW)
- If neither USB nor WiFi are available, GPRS/3G is used.
Tested with IE, Opera, Mail and Weather.
Click to expand...
Click to collapse
First, do you get the wifi turned on automatically when you start ie or opera?
second, if yes, how did you manage to do that?
regards
How did you manage to get that set up?
Click to expand...
Click to collapse
Here is how I configured (I'm translating from french, exact english terms might be a bit different) :
1. Parameters > tab "Connections" > Connections > tab "Advanced" > "Networks selection"
- In "Programs connecting automatically to Internet..." I've selected "Office network"
- IN "Programs connecting automatically to a private network ..." I've selected "OrangeWorld"
2. Parameters > tab "Connections" > WiFi > "Wireless networks" > tab "Network interface"
- In "My interface connects to" I've selected "Internet"
First, do you get the wifi turned on automatically when you start ie or opera?
Click to expand...
Click to collapse
I turn the WiFi ON/OFF manually. (For power saving reasons, I don't want it to be ON when I can't use it)
Youc an also use MoDaCo NoData utility to explicitly disable GPRS and other mobile data connections.
You need to register to download.
Alternatively, Schaps Advanced Config V3.3 has the same disable in its advanced settings, but its buried a bit too deep in the menu's.
Many people have struggled to connect to wifi using proxy. I also used to struggle. But now I have found a very simple way. It works 100% of the time. Here is the procedure.
How to set up proxy Wifi
------------------------
Go to Settings->Connections->Connections
Click on Advanced tab
Click Select Networks
Click New
Enter Name "Wifi With Proxy"
Click Advanced
Select "This network connects to the internet"
Select "This network uses a proxy
Select Advance
Put your proxy setting here.
How to set up non-proxy Wifi
----------------------------
Go to Settings->Connections->Connections
Click on Advanced tab
Click Select Networks
Click New
Enter Name "Wifi Without Proxy"
Click Advanced
Select "This network connects to the internet"
UnSelect "This network uses a proxy
Connect to wifi using Proxy.
----------------------------
Disable Wifi
Go to Settings->Connections->Connections
Click on Advanced tab
Click Select Networks
Select "Wifi With Proxy" for both Internet and Private.
Click Ok
Click Ok
Enable Wifi
It is important that you disable wifi, then select n/w and then enable wifi.
Connect to wifi without Proxy i.e direct wifi.
---------------------------------------------
Disable Wifi
Go to Settings->Connections->Connections
Click on Advanced tab
Click Select Networks
Select "Wifi Without Proxy" for both Internet and Private.
Click Ok
Click Ok
Enable Wifi
It is important that you disable wifi, then select n/w and then enable wifi.
Every time you switch from proxy to non proxy, you will have to do steps of "Connect to wifi without Proxy i.e direct wifi." manually (unless someone can write a mort sscript or some thing, if one does, then please PM me).
Everytime you switch from proxy to non-proxy, you will have to do steps of "Connect to wifi using Proxy" manually.
Enjoy.
Thank you
Thank you so much.
These steps worked like a charm. I was not able to find the details anywhere.
Didn't work for me and I don't know what's the problem. When I put my proxy settings into Opera directly via opera:config, it works flawlessly. When I use your method (and I follow the steps exactly), it doesn't.
Dear friend,
i could not find wifi without proxy,
infact my wifi is no turning on only
can anybody help me on this
please await for your expert advise
i am using imate pda2k pocket pc
with blue angell
os win 6.1
i have just recently upgraded it
thanks in advance
navaneeth
[email protected] said:
i am using imate pda2k pocket pc
with blue angell
os win 6.1
Click to expand...
Click to collapse
That's a wrong place to ask your question, buddy... If that's a custom ROM you are using on your device and there is no Wi-Fi, you should ask the ROM cook (the person who posted the ROM) in the thread you downloaded it from. Or try the dedicated forum part for your device here.
DesertsStorm said:
Didn't work for me and I don't know what's the problem. When I put my proxy settings into Opera directly via opera:config, it works flawlessly. When I use your method (and I follow the steps exactly), it doesn't.
Click to expand...
Click to collapse
How do you go about this via opera. Cant seem to find exactly were you carry out configurations
Can somebody write a mortscript to do the following.
Script 1 (WifiProxy)
---------
Disable Wifi
Go to Settings->Connections->Connections
Click on Advanced tab
Click Select Networks
Select "Wifi With Proxy" for both Internet and Private.
Click Ok
Click Ok
Enable Wifi
Script 2 (WifiNoProxy)
----------
Disable Wifi
Go to Settings->Connections->Connections
Click on Advanced tab
Click Select Networks
Select "Wifi No Proxy" for both Internet and Private.
Click Ok
Click Ok
Enable Wifi
-----------------------------
People can set set two Wifi connections one "Wifi No Proxy" and one "Wifi With Proxy". Then they can use above two scripts to switch between two when they go from home to work and work to home. Just for completeness I am giving procedure to set up above two wifi networks.
How to set up proxy Wifi
------------------------
Go to Settings->Connections->Connections
Click on Advanced tab
Click Select Networks
Click New
Enter Name "Wifi With Proxy"
Click Advanced
Select "This network connects to the internet"
Select "This network uses a proxy
Select Advance
Put your proxy setting here.
How to set up non-proxy Wifi
----------------------------
Go to Settings->Connections->Connections
Click on Advanced tab
Click Select Networks
Click New
Enter Name "Wifi No Proxy"
Click Advanced
Select "This network connects to the internet"
UnSelect "This network uses a proxy
Thanks in advance.
+1 for the script
why do you want it to disable then enable wifi. this will slow it down why not just enable/disable proxy
also you can emulate what you are trying to do with "wifi profiles"
create two profiles one with the proxy and one without. "wifi profiles" can create a shortcuts to change the profile and activate the wifi with a single touch
THE GRIZZ said:
+1 for the script
why do you want it to disable then enable wifi. this will slow it down why not just enable/disable proxy
Click to expand...
Click to collapse
Because proxy are enabled/disable with out disable/enable wifi after applying proxy, the proxy do not work. Please do not ask 'why', as I have no clue, but works when I do disable/enable wifi.
THE GRIZZ said:
also you can emulate what you are trying to do with "wifi profiles"
create two profiles one with the proxy and one without. "wifi profiles" can create a shortcuts to change the profile and activate the wifi with a single touch
Click to expand...
Click to collapse
Thank you very much to pointing me to that program. It does exactly what I wanted including enable/disable of wifi on profile selection. If anybody else is looking for same thing then please find it here http://forum.xda-developers.com/showthread.php?t=355936
Heey Guys,
I have another question for you..
Is there anyway to switch my gprs, hsdpa, 3g off, so they can NEVER turn on automatically?
So i cannot update stocks, the weather, or go on the internet without permission or only with wifi!!?
Thanx a lot.
Mike
You could use NoData or delete all Your GSM Provider Connection Settings.
D'rath
oke tnx.. where i can find NoData?
Just remove all apn's from connections
Mikeeeay said:
oke tnx.. where i can find NoData?
Click to expand...
Click to collapse
In Google!
http://garsim.blogspot.com/2009/02/modaco-nodata.html
maTTeo
Hi -just go to Settings > Connections (tab on the bottom)
Then click Connections icon and go to Advanced (tab on bottom)
Hit " New" Internet connection (box at the top)
Type in any name you want with no settings ,then click OK ,ect.
Next time you click on the weather or internet it will come up with an "connection error "
hehe!
I mistakenly thought the weather was free - i'll look out the window now.
Cheers