Hi all,
I have been surfing around the forum for a couple of days now and am completely overloaded with all the amazing information available here. I have a Wing that I love (with the exception of the slow speed and the low program memory, of course) and I have been reading all about the different downloads that people have created for changing the page pool (a term I just learned) and over-clocking (again a new word) the processor, and to be honest, with my level of experience with this unit, I am scared.
I am hoping that someone could direct me to a program that I could buy (yes I am willing to pay for it) that would quickly, safely and without configuration from me, allow me to change the processor speed and the page pool. Does such a think exist? I really don't know enough to try doing this on my own.
Also, somewhere on one of these forums, I read a post from someone a couple of days ago saying that T-Mobile was going to be issuing a new update for the Wing - does anyone know anything about that. I keep checking on their page http://www.t-mobile.com/wmupgrade/ but it's not shown up yet.
Any help would be appreciated.
Jamie
A simple search+reading wiki would have done the job for you, but, nevermind..
1) for changing pagepool, follow this post
http://forum.xda-developers.com/showpost.php?p=1456991&postcount=1
2)for easy overclocking(which actually everyone here use, that is, batterystatus)
http://www.chi-tai.info/cs_BatteryStatus_XDA_Neo_WM5_iM_cs.htm
thank you for the links - I am hesitant to try the page pool from these directions because, as I said, my experience is very limited. I'm looking for simple, easy to install programs that might address these issues.
kdskamal said:
A simple search+reading wiki would have done the job for you, but, nevermind..
1) for changing pagepool, follow this post
http://forum.xda-developers.com/showpost.php?p=1456991&postcount=1
2)for easy overclocking(which actually everyone here use, that is, batterystatus)
http://www.chi-tai.info/cs_BatteryStatus_XDA_Neo_WM5_iM_cs.htm
Click to expand...
Click to collapse
ok, here is what to do to change the pagepool in 2steps
1)install aserg's policies on your device(copy the cab on the device and execute it from the file explorer)
2)make sure that you are connected to actiesync and run the batch file on the PC then(extract the archive first)
soft reset.
l8deblu said:
thank you for the links - I am hesitant to try the page pool from these directions because, as I said, my experience is very limited. I'm looking for simple, easy to install programs that might address these issues.
Click to expand...
Click to collapse
Ummm, plug in ur phone, make sure its connected, and then open the pagepool folder and click the one that has a 6 in the file name.....its really not hard, Im pretty sure my dog could figure it out. Dont be afraid to try things. You'll surprise yourself with how much your capable of.
Where is the pagepool folder? I looked in File Explorer and even searched for it by name.... Could I borrow your dog?
chris30_2001 said:
Ummm, plug in ur phone, make sure its connected, and then open the pagepool folder and click the one that has a 6 in the file name.....its really not hard, Im pretty sure my dog could figure it out. Dont be afraid to try things. You'll surprise yourself with how much your capable of.
Click to expand...
Click to collapse
l8deblu said:
Where is the pagepool folder? I looked in File Explorer and even searched for it by name.... Could I borrow your dog?
Click to expand...
Click to collapse
Follow the post he gave you. It will have a file you download. It's a compressed folder. Uncompress it. THAT is the pagepool folder.
ivanmmj said:
Follow the post he gave you. It will have a file you download. It's a compressed folder. Uncompress it. THAT is the pagepool folder.
Click to expand...
Click to collapse
The page pool hack is alot easier than your making it seem. Even if you screw it up, the pagepool just isnt gonna work and your gonna have to start over.
1.Install the ITSUTILS_Preperation cab. (either put it on your wing thru activesync or memory card, once its in the phone just click the file for install).
2. Soft reset after the install (stylus push on small hole, right side of wing)
3. Connect the wing to the pc thru activesync.
4. From your PC double click the backup file.
5. From your PC double click the 6mb pool file. (a black dos screen will scroll a few lines of text and disapper, if no lines of text scroll you have not followed every step...hard reset and try again)
Thats step for step, easy as seducing a hooker instructions.
Hopefully you can figure out batterysatus, if not msg me and ill help you out. Anytime things seem to complex its best to read the post numerous times. Things will start to make sense, and after that if your still haveing problems there are lots of really helpful people on this site.
Good Luck
I would do a power cycle instead of a soft reset to make sure your savings got saved.
Power cycle = holding the power down until it asks you to shut down, then shutting down.
ivanmmj said:
I would do a power cycle instead of a soft reset to make sure your savings got saved.
Power cycle = holding the power down until it asks you to shut down, then shutting down.
Click to expand...
Click to collapse
Ive never noticed this, but does a soft reset have a tendency to not save settings Ivan?
Thank you one and all for your patience with me. I did it! I changed my page pool to 6 using the program you recommended and it worked just great. I have between 8-11 MB's left after start up. The only thing I am running is Contact Photo Pro. I don't know if it's a system resource hog or not, but I wanted a program that would allow me to customize separate tones for sms messages and caller tunes for my contacts, and also to have profiles where I can silence just the sms messages and allow phone calls during the night. There might be a better program out there but since I'm still such a newbie, I downloaded what I Could find first.
Again, thanks again for your help. I don't think I am going to overclock yet, as that seems scarier but for now my Wing is running better, and I can take a picture without getting a low memory error!
Airman Gimpy said:
Ive never noticed this, but does a soft reset have a tendency to not save settings Ivan?
Click to expand...
Click to collapse
If done quickly enough, yes. I used to do it all the time...
T-Mobile wing
so far T-Mobile has no plans for any updates to the wing. i'll keep you posted if anything changes.
brooks23 said:
so far T-Mobile has no plans for any updates to the wing. i'll keep you posted if anything changes.
Click to expand...
Click to collapse
Do you work for tmobile?
If so, that's sad... because they're starting to drag behind the competition... I do love their cheap data plan, though...
Airman Gimpy said:
The page pool hack is alot easier than your making it seem. Even if you screw it up, the pagepool just isnt gonna work and your gonna have to start over.
1.Install the ITSUTILS_Preperation cab. (either put it on your wing thru activesync or memory card, once its in the phone just click the file for install).
2. Soft reset after the install (stylus push on small hole, right side of wing)
3. Connect the wing to the pc thru activesync.
4. From your PC double click the backup file.
5. From your PC double click the 6mb pool file. (a black dos screen will scroll a few lines of text and disapper, if no lines of text scroll you have not followed every step...hard reset and try again)
Thats step for step, easy as seducing a hooker instructions.
Hopefully you can figure out batterysatus, if not msg me and ill help you out. Anytime things seem to complex its best to read the post numerous times. Things will start to make sense, and after that if your still haveing problems there are lots of really helpful people on this site.
Good Luck
Click to expand...
Click to collapse
Double click the Backup file? where is that located?
Related
Hello one and all.
I have been looking at this forum for about 1 week and i'm still none the wiser. This may be because I have no idea what im doing and I am a little worried about making rom changes as I have no experinace of this.
I have a 02 exec. Which i am happy with but its a bit slower than I thought it would be. The phone seams to mess around when answering.
I have booted it up as normal on the basic setting.
A few questions that I have :-
What is the best setting to boot up on basic or corperate with the code ?
What reg changes are critical to boost performance ?
Any Software that I should get for the Xda ?
VGA settings do I need to change them ? What effect does it have.
Any advise would be good. If it could be given in a format my 2 year old could understand that would be good for me.
Thank you in advance
You'll find a wealth of information on each of your questions by browsing & searching the posts already on this forum.
thanks moandal that's why I posted.
1 post says basic setup another say corporate. 1 post says hack this that and the other. another says not to.
I'm new to pocket pc.
these forums do not make it clear what is best.
example radio version 1.06 or 1.08 at least 3 posts on here saying each one is better than the other. I have no idea.
all I was asking for is some guidance as to which set up has worked best for people.
@CRJL you've one up on me mate - I did not even know this thing had two modes!!!
BTW, why is that? Someone mentioned somewhere a corporate password - how to enter this & why would I want it.
BTW CRJL, I agree with you, these little devices are very confusing, espcially because the front end software (WM5) is soooooooo labourious!
Andy
when you hard reset the thing. after all the rom stuff loads up it gives you the choice of basic set up or corporate. it selects basic automatically after 20secs.
if you tell it corporate then you have to put the code 0506 in. this the uninstalls some stuff off the exec. you loose mms and all the gprs an 3g settings for conecting to the net. (i don't know what else it does) some of the people in the forums say it makes the exec faster. I could not really notice any difference.
you loose a few applications as well.
until I learn more I'm staying in basic.
I find these forums are for more advanced users so the simple questions tend to get missed. (im talking abot my first post) still not had a reply answering my questions
CRJL said:
What is the best setting to boot up on basic or corperate with the code ?
Click to expand...
Click to collapse
for this you should first make a hard reset (carefull, with hard reset you will loose all data!) by pressing both app buttons and reset at the same time.
When it starts up, after the installation countdown shows up you should make a reset to stop the automatic setup.
Now you have a machine, which is only basic setup. See how you like the things in there.
After you now enough about this, you can make same hard reset again and start the corporate setup. Then see, how you like this setup.
After this do same with basic setup.
In total you have then an idea, what you can have with the 3 different setups.
Now you can decide, which of the 3 setups you want to start with. After this, you should read the posts about Extended Rom, how to unlock it, which programs are in there etc. Then you get an idea for example how to install some software in the basic setup.
Also, you can add some programs from other Roms. For example I have an MDA Pro and I added the I-Mate Backgammon game to my setup.
Try out and see what customizations you want and need, which you do not want.
CRJL said:
What reg changes are critical to boost performance ?
Click to expand...
Click to collapse
Basically, this does not really make difference. Forget about reg changes. Performance depends on running programs and setup - see above.
As far as I know, o2 installs some app in the basic setup, which makes the device slow. As I never tried o2 rom, I do not know, if this is true.
CRJL said:
Any Software that I should get for the Xda ?
Click to expand...
Click to collapse
read here:
http://forum.xda-developers.com/viewtopic.php?t=31697
here also I recommend to try out the software and just keep the ones you like.
In total I would recommend you to create a directory on your PC where you put all the setup and cab files, which you want to have in your final setup. After trying out all, make a hard reset again and install the files from this directory. This prevents any junks to be left behind from your previous tries.
CRJL said:
VGA settings do I need to change them ? What effect does it have.
Click to expand...
Click to collapse
I think, you get more problems than it helps. Some programs appear too small on the screen. And when you make a Romupdate this does not work anymore.
I recommend not to install any VGA Patches. Instead just set the text size to more small and search in this forum for some registry hacks to change system font etc. and see if you like it, when the font is more small (this is good for Opera or PIE as you can view complete page!)
Nice reply, thanks mate!
erm
yes
ahem
erm
what are the ><ahem, ahem>< "app buttons"
Andy (thicky wicky Blacky wacky Adder)
thank you. I will give the 3 setups a go. I did read that if you soft reset before the counter that video calling does not work.
will give it a go and see what happens I'm sure there will be a cab file on here to sort it out.
anyone wishing to add any pearls of wisdom fee free. I'm learning more and more all the time.
app buttons: the buttons on the keyboard, which have changing functions. these functions are shown at the bottom of the screen. These buttons can be found to the right and left of the red and green call buttons on the keyboard.
about video calling: yes, this feature is installed after you switch on first your device. it is activated with one cab file. If you can find out which cab file this is, you can install it manually in the basic setup.
I've been reading thru the posts on the touch dual and see a pretty overwhelming response in the positive range regarding the device. It's been out for a bit so it is getting a track record. I've decided to order the 20 key qwerty. Was getting a little buyers remorse and was wondering if there were any consistant ongoing issues that perhaps I missed. I would appreciate all comments. Thanks. Hope I'm not making a mistake. I currently have the cruise so I'm used to the touch flo. I think I'm going to like the qwerty slider.
hi there cbreze,
After speaking to a few members on here, who have been extremely helpful, i think the phone sounds really good. Read Here:-
http://forum.xda-developers.com/showthread.php?t=379178
But after reading about a few issues, i'm beginning to get paranoid if i made the right choice. On this thread, there is a mention of people having problems locking and unlocking the phone when answering calls:-
http://forum.xda-developers.com/showthread.php?t=353569
Personally, all i want is a phone which when in closed position is locked and i shouldn't be able to use the Touchscreen or any other button, but when i slide it open, that should be the time when i should be able to answer calls or press buttons to dial out.
Also there is the mention of constantly doing soft resets etc. I hope this isn't a regular issue
newbiefone said:
Personally, all i want is a phone which when in closed position is locked and i shouldn't be able to use the Touchscreen or any other button, but when i slide it open, that should be the time when i should be able to answer calls or press buttons to dial out.
Click to expand...
Click to collapse
when you get your touch, you might be interested in this neat little app.
http://forum.xda-developers.com/showthread.php?t=359212
thanks ducamie for the link and also for PM'ing me earlier. I'm waiting for delivery today and hope that the phone arrives quickly.
For those who are total noobs, like myself to WM6, what is the best way of learning to install these apps? FYI, i am very computer literate, but dread to mess with mobile phones. I assume WM6 is like Windows XP in file structures, extensions and to install is also a similar method?
if you understand about computers, ppc should be a walk in the park for you!!
it's pretty simple to install anything:
download the .cab file (.cab is for your ppc as .exe is for your pc)
copy the .cab file to your ppc
open the .cab file with your ppc
it installs automatically (you just need to choose the location)
done!
just like a normal computer
I got mine for about 2 weeks now. Overall device is good, only disappointment for me is that XT9 cannot be disabled, it is default input method and you have to manually change all the time. Also when you want to use hardware keyboard for typing sms, it only types numbers When i was ordering this device, i was planning to use hardware keypad for typing stuff, but it is just not usable.
I installed Opera Mobile, similarly, if you want to type URL in address bar using hardware keypad, only numbers can be typed. Not sure if there is a fix somewhere on this forum, i could not find one so far.
creaking
first of all, i love my device!
but quite a long time the cap @ the backside of the device is creaking when i use the touchscreen or the keypad. does anyone have this problem too? what can i do against that? put'em into the freezer
Yep, they all do that (the creaking, that is!). Mine does it as well. It's because there are no strengthening bars in the battery cover, meaning that it flexes when pressed. Nothing to worry about. I actually dropped mine yesterday (I was on a call) and it didn't even drop the connection. The battery cover flew off but, otherwise, the phone was fine. No marks at all. I do have a screen protector on as well, which ultimately saved me a massive headache!
Would a simple bus. card on top of the battery or a section of tape wrapped around the battery help any. I've never had a device yet I couldn`t fix a batt. door creak by using some simple mod. I hate that creaking noise thing!
jvieira said:
if you understand about computers, ppc should be a walk in the park for you!!
it's pretty simple to install anything:
download the .cab file (.cab is for your ppc as .exe is for your pc)
copy the .cab file to your ppc
open the .cab file with your ppc
it installs automatically (you just need to choose the location)
done!
just like a normal computer
Click to expand...
Click to collapse
Well thats very interesting, thanks for that helpful explanation. Without mentioning too much detail (shhh ) Can i get tomtom to fit on a 1gb microsd card supplied by orange or will i need to buy another card? Also how hard is it to install tomtom on the ppc? Do i simply run a .cab file?
newb here, my names chris and im from hagerstown MD im 20 and i just ordered a t mobile wing....just switched over from the sidekick lx....
cant wait for my wing to get here tomorrow. First off i have a few questions about modding my wing, ive tried to understand all the faqs and posts but im just not catching on. my goals are to get a custom layout with a custom pic for my backround with a diff. clock and ringtones from mp3s. possibly a mario game if possible. if anyone could walk me thru this id be very greatfull, thanks chris. p.s. i only have a 128mb sd card will i need larger?
You got alot to look forward to. As for games/emulation on the Herald is below par in my opinion. Games designed for Windows Mobile work great though. As for customization there is tons to do. First consider changing your rom. Plenty of options to choose from here. You also might want to invest in a little research on the benefits of HardSPL. If you wish to converse feel free to message me. I am in no way an expert but I have plenty of time to share what I have learned reading here if you want.
im really excited about getting it. ive checked out the rom stuff but i still dont really understand how it all works.....if you could point me in the right direction as to how i should do this in order from most important to least that would be great....i just know as of now i have to download,unzip,drag to phone,and manually start the programs....id just like to know for sure so i dont brick my phone. ive seen some accept donations for helpin out and id donate into a paypal accound or a sd card or whatever if someone cared to lay this all out for me and link me what im looking for etc. like i said i just want a custom layout or toolbar and ringers off my sd and pictures of my bike as backround....id like a mario game or somethin so when im bored at work i have a kill time
http://forum.xda-developers.com/showthread.php?t=326655&highlight=overclock
that helped me out alot
ok i think ive figured out alot from the forums now ive downloaded a morphgear emulator where can i get games for it and will i be ok using stock rom or will i need to reflash due to file sizes?
neiltoe said:
You got alot to look forward to. As for games/emulation on the Herald is below par in my opinion. Games designed for Windows Mobile work great though. As for customization there is tons to do. First consider changing your rom. Plenty of options to choose from here. You also might want to invest in a little research on the benefits of HardSPL. If you wish to converse feel free to message me. I am in no way an expert but I have plenty of time to share what I have learned reading here if you want.
Click to expand...
Click to collapse
All I have to say, is there is a TON of information on this website to read through. I think I read and did some research for about 2-3 weeks before I actually hard spl'd my phone. I would recommend using the uspl method to flash first. It's safer so if you screw up, you don't brick your device. Once you start understanding more, you can Hard spl and then it's a lot easier to flash to different roms. That way you can try out all the roms out there to see which you like best. I used the uspl method and flashed to Open Touch v 3.0 biggy which I LOVED!
well i have my wing in hand and it rocks....unfortunately after ive decided to just do small mods first such as .cab etc. i realised i need active sync and my super retarded vista wont let me download anything grrrrrrr.
ok got my sync workin yesssssssss now i just need to figure out which file to store the cab files.....anywhere should be fine theoretically....
lushbaugh said:
ok got my sync workin yesssssssss now i just need to figure out which file to store the cab files.....anywhere should be fine theoretically....
Click to expand...
Click to collapse
Yeah, what I do, is I made a folder called Cab Files on my sd card. I copy all cab files I want to install there. I also installed this cab file that keeps all your cab files in that folder after you install them. That way, when you flash to a different rom, you already have all your favorite cab files in that folder. There is no need to copy them from your computer to your phone. (When you usually install a cab file from your phone, the original cab file gets deleted) I included the cab file to keep your files.
sweet man now everything is up and runnin now im gonna figure out this clock glow and im already debating switching roms.....i cant get page pool mod to work soooo
lushbaugh said:
sweet man now everything is up and runnin now im gonna figure out this clock glow and im already debating switching roms.....i cant get page pool mod to work soooo
Click to expand...
Click to collapse
Yeah, I used the clock glow thing too. All you do is copy all the files into your windows directory. It will ask you to overwrite them. Then, just do a soft reset, and presto!
i cant over write the original home files to glow the clock.....im not messin with it any more.....ill start looking into roms now
lushbaugh said:
i cant over write the original home files to glow the clock.....im not messin with it any more.....ill start looking into roms now
Click to expand...
Click to collapse
Ah, yeah...trust me on this one, you def. want to check out some different roms though. I would look into using the uspl method first though. It's safer than hard spl'ing, and it's relatively easy to flash to. Look up Open touch 3.0. There is a ton of info on how to flash to it. If you have any questions, just private message me.
Hi guys,
I'm fairly new here, but I thought that I should join in on the contributions and give back to the community, because I've already had countless hours of help just by searching through the knowledge (mostly garbage though..) that can be found through the search engine! Anyhow, after through much sifting, I managed to create a nifty little tool to help you turn off your Touch HD via software. What's the purpose of this? It is simply to preserve the lifespan of your power button. For some reason, the powerbutton and volume buttons just don't seem too solid to me (mainly the powerbutton).
Enough wish-wash, let's get down to it!
What you need:
1) HTC Touch HD (It may work on any phone with a 480 x 800 layout, I'm not sure, I only had enough money to buy a single phone)
2) If you don't already have it, get Mortscript and install it onto your phone.
3) Now, download the tiny attachment and extract the "Auto Shutdown.mscr" file within it. Place this anywhere you'd like, on your Desktop for example.
Baby-Step-by-Step instructions:
1) Connect your phone to the computer. Mine is set via USB only, no active Sync. Copy/Cut the "Auto Shutdown.mscr" file to any location on the phone's storage.
2) Disconnect USB, and unplug the cable.
3) Go to File Explorer, and look for your "Auto Shutdown.mscr", wherever you placed it earlier and copy/cut the file.
4) Navigate your way to the phone's storage via File Explorer, and go to Windows > Start Menu > Programs > MortScript >
5) Paste the "Auto Shutdown.mscr" there.
6) Soft-reset.
And, that's it! I asked you to place the .mscr file inside the MortScript folder because this prevents you from accidentally pressing the file when viewing the Programs menu. If you're going to add the .mscr file to the TouchFLO shortcut list, I strongly suggest you put it all the way to the bottom to prevent accidentally presses as well. After all, upon pressing, your phone will shutdown.
Having said that, you can also now use this with Cyberon Voice Commander or Microsoft Voice Commander, so it's really quite awesome in my opinion.
If someone has already posted something like this (I don't remember seeing any when I searched though...), feel free to ignore this entire post of blabber and move along already, I can't believe you had the patience to read till this last word!
Enjoy! I know I am!
Cheers.
EDIT: I've uploaded a new file down below. Download that file instead. This will now work with any phone running WM 6.1 and higher. I am not certain if this will work on WM 6.5 based cores as I am not sure how the Shutdown process works.
I can't imagine that the power button (nor the volume buttons) will take any damage by simply pressing them. I'm doing so for five months now (pressing them often during the day) and haven't noticed any damage.
The only think to consider is the fact, that you have to press the power button on the left side. You don't need to press it hard then.
Anyway I think there are enough exe files, which will shutdown your device, so writing a MortScript isn't neccessary at all.
johnpatcher said:
I can't imagine that the power button (nor the volume buttons) will take any damage by simply pressing them. I'm doing so for five months now (pressing them often during the day) and haven't noticed any damage.
The only think to consider is the fact, that you have to press the power button on the left side. You don't need to press it hard then.
Anyway I think there are enough exe files, which will shutdown your device, so writing a MortScript isn't neccessary at all.
Click to expand...
Click to collapse
John,
Thanks for the input. See, I thought my power button was funky when it was only more responsive on the left side, at least now I know that the phone was made that way. To each his own I guess (I am very compulsive when it comes to the care of a new gadget, sometimes a little insane), I just got the phone like 2 days ago, so I'm still just finding my own balance on what is comfortable and preferable for me. I just thought I'd share it with you guys, that's all .
My philosophy when it comes to doing things is to do things with the least amount of resources, in this case, installing the least amount of programs. I see MortScript being very useful for me in the future in doing certain things without having to install more .exe files.
Cheers!
PoisonWolf said:
... It is simply to preserve the lifespan of your power button.
Click to expand...
Click to collapse
Thanks for sharing your developement.
Using your tool might help to use the power button 10 years or more. I bought my device in Germany. Here we have 2 years of warranty and I don´t plan to use my Blackstone very much longer.
Matthes42 said:
Thanks for sharing your developement.
Using your tool might help to use the power button 10 years or more. I bought my device in Germany. Here we have 2 years of warranty and I don´t plan to use my Blackstone very much longer.
Click to expand...
Click to collapse
Matt,
I honestly cannot tell if you're trying to be condescending, patronizing or what have you. If you honestly don't want to use the script, simply don't, I'm not begging you to use it. It's really that simple. If you must go out of your way to put other people down for things they've shared, then I simply feel sorry for you.
But okay, thanks for the response.
Cheers.
PoisonWolf said:
Hi guys,
I'm fairly new here, but I thought that I should join in on the contributions and give back to the community, because I've already had countless hours of help just by searching through the knowledge (mostly garbage though..) that can be found through the search engine! Anyhow, after through much sifting, I managed to create a nifty little tool to help you turn off your Touch HD via software. What's the purpose of this? It is simply to preserve the lifespan of your power button. For some reason, the powerbutton and volume buttons just don't seem too solid to me (mainly the powerbutton).
Enough wish-wash, let's get down to it!
What you need:
1) HTC Touch HD (It may work on any phone with a 480 x 800 layout, I'm not sure, I only had enough money to buy a single phone)
2) If you don't already have it, get Mortscript and install it onto your phone.
3) Now, download the tiny attachment and extract the "Auto Shutdown.mscr" file within it. Place this anywhere you'd like, on your Desktop for example.
Baby-Step-by-Step instructions:
1) Connect your phone to the computer. Mine is set via USB only, no active Sync. Copy/Cut the "Auto Shutdown.mscr" file to any location on the phone's storage.
2) Disconnect USB, and unplug the cable.
3) Go to File Explorer, and look for your "Auto Shutdown.mscr", wherever you placed it earlier and copy/cut the file.
4) Navigate your way to the phone's storage via File Explorer, and go to Windows > Start Menu > Programs > MortScript >
5) Paste the "Auto Shutdown.mscr" there.
6) Soft-reset.
And, that's it! I asked you to place the .mscr file inside the MortScript folder because this prevents you from accidentally pressing the file when viewing the Programs menu. If you're going to add the .mscr file to the TouchFLO shortcut list, I strongly suggest you put it all the way to the bottom to prevent accidentally presses as well. After all, upon pressing, your phone will shutdown.
Having said that, you can also now use this with Cyberon Voice Commander or Microsoft Voice Commander, so it's really quite awesome in my opinion.
If someone has already posted something like this (I don't remember seeing any when I searched though...), feel free to ignore this entire post of blabber and move along already, I can't believe you had the patience to read till this last word!
Enjoy! I know I am!
Cheers.
Click to expand...
Click to collapse
Thanks for spending the time to share with us your program... I find it usefull as i.m sure many more will....
Thanks for sharing!!!
Guys,
I've actually tweaked it a little bit. I am currently using the attached version. The attached version will work with any phone of any resolution (I think it has to be WM6.1 and above).
Still reading up on the Mortscript language, very nifty, I must say! Enjoy!
Cheers.
I used my last phone (XDA) for five years. The power button went after a couple of years. Ok it really got smashed in as it fell off a two story scaffold on a construction site so I might just bookmark this page for later use.
can we just put the .msr into the programs folder and without installing the mortscript, will it work?
bigdeal88 said:
can we just put the .msr into the programs folder and without installing the mortscript, will it work?
Click to expand...
Click to collapse
Bigdeal88,
No, you need mortscript because it is the parser. Mortscript is the program that reads and processes/parses the .mscr files. It is essentially a simple script reader.
Why do you ask? Are you not able to use Mortscript?
Cheers.
PoisonWolf said:
Bigdeal88,
No, you need mortscript because it is the parser. Mortscript is the program that reads and processes/parses the .mscr files. It is essentially a simple script reader.
Why do you ask? Are you not able to use Mortscript?
Cheers.
Click to expand...
Click to collapse
hi,
this application is just too great to be missed. its just that i am lazy to try mortscript.. would be wonderful if there is a cab file. nonetheless, am dnloading mortscipt now to give this prog a try.
thanks alot!
Hi, i followed the instructions, installed mortscript and copy the file, reset phone. When i click the file "shutdown process.mscr" i get a warning.
Window "Warning" could not be found.
Line 2 (\windows\start menu\programs\mortscript\shutdown process.mscr):waitforactive("warning", 10)
Thanks.
thanks for your effort.
ruguk said:
Hi, i followed the instructions, installed mortscript and copy the file, reset phone. When i click the file "shutdown process.mscr" i get a warning.
Window "Warning" could not be found.
Line 2 (\windows\start menu\programs\mortscript\shutdown process.mscr):waitforactive("warning", 10)
Thanks.
Click to expand...
Click to collapse
Ruguk,
Are you using WM 6.1? The script assumes that you have the "PowerOffWarning.exe" available in your Windows folder. I would assume that all WM 6.1 would have this file.
@Zolom,
You're welcome.
Cheers.
Hi, my version is just 6. So i guess thats why i don't have PowerOffWarning.exe in windows folder. Maybe its time to upgrade my phone or search more for a full shutdown soft.
Thanks.
ruguk said:
Hi, my version is just 6. So i guess thats why i don't have PowerOffWarning.exe in windows folder. Maybe its time to upgrade my phone or search more for a full shutdown soft.
Thanks.
Click to expand...
Click to collapse
Ruguk,
There is no need to mate. Go to your windows folder and browse the contents. I assure you, you will find something along the lines of PoweroffWarning.exe. Just keep looking. When you think you've found the right file, just try pressing on it and see if the warning window pops up. If that's the one, then you've got the right file. All you do then is open the .mscr file with notepad and modify the PowerOffWarning.exe name to the name of whatever it is that you found. It is important that you leave the formatting exactly the same as it was.
Cheers.
PoisonWolf said:
Guys,
I've actually tweaked it a little bit. I am currently using the attached version. The attached version will work with any phone of any resolution (I think it has to be WM6.1 and above).
Still reading up on the Mortscript language, very nifty, I must say! Enjoy!
Cheers.
Click to expand...
Click to collapse
THANK YOU
THANK YOU
I had been looking for a app that could turn off the phone.
I hate having to hold the power button.
cyberhern said:
THANK YOU
THANK YOU
I had been looking for a app that could turn off the phone.
I hate having to hold the power button.
Click to expand...
Click to collapse
Cyberhern,
Haha, you're welcome. But if you don't mind installing a third party program and filling up the registry with an additional couple of lines, look for the PowerOptions software in the Development and Hacking section.
Cheers.
PoisonWolf said:
Cyberhern,
Haha, you're welcome. But if you don't mind installing a third party program and filling up the registry with an additional couple of lines, look for the PowerOptions software in the Development and Hacking section. Cheers.
Click to expand...
Click to collapse
Found it thanks very cool
Also found a cab that adds a power off ink
its called 888_poweroff
thanks again
Will be taking delivery of my HD2 today.What do I need?
File Explorer? Total Explorer? Which version? According to the website none support the snapdragon processor(unless it has a different name)
What about to change visual aspects?
Is it just a case of finding a particular .cab file, loading it onto the SD card and installing?
And how does it work? If I install (for eg) transparent slider.cab ,then decide I dont want transparent just reduced transparency, do I need to uninstall the first one and install the second?
saldawop said:
Will be taking delivery of my HD2 today.What do I need?
File Explorer? Total Explorer? Which version? According to the website none support the snapdragon processor(unless it has a different name)
What about to change visual aspects?
Is it just a case of finding a particular .cab file, loading it onto the SD card and installing?
And how does it work? If I install (for eg) transparent slider.cab ,then decide I dont want transparent just reduced transparency, do I need to uninstall the first one and install the second?
Click to expand...
Click to collapse
Seriously, wait till you've had the phone for about a week before doing anything to it. You sound like a puppy that's about to go for a walk! Chill man. Get to know the phone before you start changing it, or you'll just end up asking for things that it already does!
Yeah thanks.
Any answers to the questions I asked though?
saldawop said:
File Explorer? Total Explorer? Which version? According to the website none support the snapdragon processor(unless it has a different name)
What about to change visual aspects?
Is it just a case of finding a particular .cab file, loading it onto the SD card and installing?
And how does it work? If I install (for eg) transparent slider.cab ,then decide I dont want transparent just reduced transparency, do I need to uninstall the first one and install the second?
Click to expand...
Click to collapse
File explorer will not let you copy/move certain files, but Total Commander, or Resco Explorer will. Just get the latest version, and don't worry about the processor. They run on Windows - they don't care about the processor.
If you install theme/visual changes, there's no hard-and-fast rule about what to do to replace the changes. Some of them you can uninstall and it restores the original look. Others don't. You can usually just install a new change over a previous one, but not always. You're gonna have to just find out through trial and error, or by asking, when you have specific questions to ask.
I wasn't being dismissive earlier - there's just no straight forward answer to such ambiguous questions.
Enjoy your new phone mate. I've had mine for 6 weeks now and I still love it like it was new yesterday!
johncmolyneux said:
File explorer will not let you copy/move certain files
Click to expand...
Click to collapse
Uhh... yes it does. Menu -> Edit -> Copy/Cut/Paste/Paste Shortcut. I've got Total Commander but I only really ever use it for registry tweaks.
DexyG said:
Uhh... yes it does. Menu -> Edit -> Copy/Cut/Paste/Paste Shortcut. I've got Total Commander but I only really ever use it for registry tweaks.
Click to expand...
Click to collapse
Uhh... just because the options are there doesn't mean they work for every file. As you quoted me saying, "File explorer will not let you copy/move certain files" (certain files, not all files).
Thanks
Uhh... You're both right!
File Explorer will NOT let you copy/move/delete certain files
However it WILL let you copy/move/delete certain files
The key is the words 'certain files'. The 'certain files' John C is referring to are, for example, most of the files stored in the Windows folder and these tend to be exactly the ones we want to delete or rename. You WILL need one of the above-mentioned apps to mess around with them.
File Explorer is fine if you're only manipulating non-System files.
johnkst said:
Uhh... You're both right!
File Explorer will NOT let you copy/move/delete certain files
However it WILL let you copy/move/delete certain files
The key is the words 'certain files'. The 'certain files' John C is referring to are, for example, most of the files stored in the Windows folder and these tend to be exactly the ones we want to delete or rename. You WILL need one of the above-mentioned apps to mess around with them.
File Explorer is fine if you're only manipulating non-System files.
Click to expand...
Click to collapse
I was only explaining that I wasn't wrong - he'd misread my statement. Obviously if it doesn't work for certain files then it does work for the rest. The context of the question suggests that the OP needed that explaining to him, or he'd only come back later and say "I can't copy this manila file into the windows folder", and we'd have to explain it to him then!
Bottom line, we're all right, and we're all trying to give the OP a concise answer (which I think he's got now)
Ah ok, my bad. Sorry.
Ahhh... That's nice...
Now we're all friends again, to come back to the OP's original question, I'm with John C on this. Take your time, get to know your phone and decide what you REALLY need first.
IMHO, the only thing you should install from the start is the BSB Tweaks cab (Just search the Leo forum for latest version - I think it's in a sticky somewhere). This will save you having to install a Registry Editor and installing a lot of these tweaks manually. It also makes it a lot easier to switch the tweaks on and off.
There are also some HTC updates now available (for Camera, SMS and SD Card). They have been out for a few days now and I haven't seen too many complaints, so I would say they are all safe to install...
Finally... ROM updates...
There are a couple now available from HTC. But again, unless you're experiencing a problem which you know has been fixed by these new ROMs, I would leave them alone. I've still got the original O2 ROM in my HD2 and it's working perfectly well, so I've not bothered to upgrade just yet.
All of the above is just my personal opinion. Hope you find it useful...
By the way, if you find BSB Tweaks (or any other cab that someone has invested time and effort into creating) useful, you might want to think about making a small donation. A $5 PayPal transaction is easily made, costs about the price of a pint (in the UK) and really makes these guys (and gals) faces light up!
Wont be updating the ROM. TBH I dont even know if I will be keeping the phone. I am an iPhone owner .
saldawop said:
Wont be updating the ROM. TBH I dont even know if I will be keeping the phone. I am an iPhone owner .
Click to expand...
Click to collapse
Now you tell us...! ;-)
Just before we all get tarred with the same brush, I'm also an iPhone owner, and will be keeping my ROM-upgraded HD2 and selling my 3GS ;-)
Got my HD2.Although Im liking(not loving) it ,there are a couple ofthings I dont like.
1) I sometimes wake up to 30+ spam emails.Do I really have to open each one and delete them individually?(havent had the phone 24 hours so happy to be proved wrong)
2) I dislike the fact that when I delete an email from the phone, it deletes from the server
3)Dont like having to mess about opening different video players depending on codec (BUT it does play different codecs so cant really complain I guess)
4) This is probably down to not having too much time to play, but how do I get the screen to turn off? Is there a setting somewhere I can turn it off after x amount of time.Or do I HAVE to press the power button?
Got my HD2.Although Im liking(not loving) it ,there are a couple ofthings I dont like.
1) I sometimes wake up to 30+ spam emails.Do I really have to open each one and delete them individually?(havent had the phone 24 hours so happy to be proved wrong)
2) I dislike the fact that when I delete an email from the phone, it deletes from the server
3)Dont like having to mess about opening different video players depending on codec (BUT it does play different codecs so cant really complain I guess)
4) This is probably down to not having too much time to play, but how do I get the screen to turn off? Is there a setting somewhere I can turn it off after x amount of time.Or do I HAVE to press the power button?
5) Oh, and the Alarm!!! Is it possibly the worst alarm on a mobile phone ever?
Im not the heaviest of sleepers but there is a strong possibility that I would miss the 2 second alarm.
saldawop said:
Got my HD2.Although Im liking(not loving) it ,there are a couple ofthings I dont like.
1) I sometimes wake up to 30+ spam emails.Do I really have to open each one and delete them individually?(havent had the phone 24 hours so happy to be proved wrong)
2) I dislike the fact that when I delete an email from the phone, it deletes from the server
3)Dont like having to mess about opening different video players depending on codec (BUT it does play different codecs so cant really complain I guess)
4) This is probably down to not having too much time to play, but how do I get the screen to turn off? Is there a setting somewhere I can turn it off after x amount of time.Or do I HAVE to press the power button?
5) Oh, and the Alarm!!! Is it possibly the worst alarm on a mobile phone ever?
Im not the heaviest of sleepers but there is a strong possibility that I would miss the 2 second alarm.
Click to expand...
Click to collapse
1) You can click on "Inbox" then Menu->Select Messages->Several, Choose the messages you want to mark as read then Menu->Mark as read/delete
2) I kindof makes sence to delete the email - keep the two in sync or is that only my perception on things
3) Try use one codec possibly, I'm certain there are different players out there with the ability to play a wider range its just a case of looking (sorry i don't really use my phone for music/multiple video formats)
4) Yes there is a setting settings->sound and display->backlight
5)Agreed it is rubbish I've tried G alarm because everyone seems to rave about it but i wasn't too keen but you could still try it and it does do the alarm sound for longer than 2 rings
Thanks for that Strange though because the screen is set to switch off after 1 minute. It doesn't! Was still on when I woke up this morning