Software problem please help - 8525, TyTN, MDA Vario II, JasJam General

I was setting the alarm on my herm using the Clock & alarms application that came with windows mobile. i set the alarm time (810am) and checked off the box to enable then i clicked OK and my phone froze i restarted it and i saw that it didnt save my alarm... so i set another alarm... well now I get that (810am ) alarm without setting it and i cant stop it because it doesnt show that anything is set... can anyone help? maybe there is registry i have to edit or delete something.
thanks

Related

Ghost Alarms in WM5

I have a strange issue with Alarm/Notifications in WM5
I had set an alarm using the built-in clock/alram app. Normally when the alarm rinds, there's a dismiss option in the soft buttons in WM5. This is how it has been working for a while.
Strangely, two days ago, the alarm rang but there was no dismiss option... there was no way for me to snooze or dismiss the alarm. I muted my phone and after a while un-muted it and the alarm was gone. Then i went to the alarm app and disabled the alarm.
The same day, i set up an appointment in calendar. When the appointment nitification came on, the sound was played but again, the dismiss option was nowhere to be seen. I couldnt snooze this alarm either.
Now this is one issue, the main annoying issue is that whenever i soft-reset my phone, these two ghost alarms (the original alarm which does not exist anymore, AND the notification for that entry in my calendar which i couldnt snooze, because the option was not displayed) they start sounding as my phone is half way rebooting... And there's nothing i can do to dismis or snooze them.
Any idea? any help will be appreciated. thanks!
I have exactly the same problem. I have set an alarm using the built in Clock & Alarm app in WM5 and could not dismiss it when it came up. Since then, whenever I do a soft reset, the alarm starts up while the device is booting. The annoying part is that it was set to repeating alarm and that's exactly what it does after each soft reset. It repeats less and less frequently and eventually it doesn't repeat any more, but there is nothing I can do to turn it off. I have tried resetting all the options in the Clock & Alarm app but still no luck. I have tried removing the Alarm events in the Notification queue, but they keep coming back after each soft reset.
Has anyone experienced this before, and found a solution to it?
BTW I'm using i-mate JASJAR, but this post describes exactly my symptoms.
I've done some further investigation, and I found a couple of entries in the Registry under HKEY_CURRENT_USER\System\State\Shell\Reminders\ that match the description and time I have set up originally for the alarms that keep sounding after every soft reset.
I have tried deleting the entries in the Registry, but after another soft reset, the entries are back! How can I get rid of these for good?
It looks like I've solved the problem...
1. I have deleted the entries from the Registry using Resco Registry Editor that matched the Alarm descriptions that I originally set for the alarms that later kept coming back...
AND
2. I have deleted the clock.exe notifications from the list using Check Notifications from ScaryBear Software.
Once I rebooted, the notifications didn't reappear, the registry entries didn't come back, and most importantly, the ghost alarms didn't go off again!
I have tried both 1 and 2 above before individually between resets, but not both together. When I only did one or the other, both the notifications entries and the registry entries came back after the reset, causing the ghost alarm to keep running after each reset.
I hope this will help anyone else who gets into the same situation.
Thank you very much!
It worked, the alarm was driving me nuts!

Alarm keeps on going off after soft reset! Help please!

Hi,
My prophet's (M600) alarm keeps on going off when I reset the device. There is no notification and no ways to stop it. I have to mute the device for an hour or so, then it "forgets" about it. Any idea why this happened and any ways to stop it apart from hard resetting?
Thanks in advance
Hi,which alarm ? Alarm clock ?
Yes, I think it is the alrm clock. As I said there is no notification saying what alarm it is, but it is the same sound as I used for Alarm clock to wake up in the morning.
Thanks
Maybe a scheduled task registered every day no ?
No. Infact there is no alarm set now. I dont even use it to wake up in the morning. I have turned off the alarm. Still it starts after a soft reset.
Thanks for reply
Do you use a plug today in your today screen ? Next message in pm.
The problem will be a notification in the notify queue that should not be there. For a calendar reminder it will be a calendar.exe notification. Use the attached program to check the notification queue - find the one and delete. For the alarm notification - turn off alarm and check the queue and delete any clock.exe notifications which is the one for alarms. Also goto options/settings and tick both boxes and check for duplicate notifications which will be marked in red - delete those. Do not delete the other notifications they are needed for the normal running of the device.
Activesync your device and run exe from pc.
Thanks for the reply. I tried this using memaid. But no cure. So, I had to hard reset my device. Thanks anyway :roll:
Thanks for the reply. I tried this using memaid. But no cure. So, I had to hard reset my device. Thanks anyway :roll:
hey, I was having the same problem - and it worked! MemMaid will open the notificaiton queue; from there, I had to look for any "CLOCK.EXE" type notification - I found several that were set for daily alarms, even though they never rang (and I don't remember setting them.) Deleting them did the trick!
THANKS!
help please
So it gets rid of the notifications.
but if i want to use the windows alarm, why does it not show up on the screen when the alarm is going off? I want to be able to snooze.
should i just use a 3rd party alarm?
Worked for me
Yep that program worked for me to. only problem was i had so many clock.exe in the list and you can only select one at a time and it takes its time. but still quicker that reseting my phone up after a hard reset.
cheers
I had the same problems as others listed on here and so I am trying this fix. During the fix I noticed a lot of "null" applications.
What do all the "null" lines mean?
Example: Application - Null
Notify type - CNT_TIME
Event Status - Active
Event Type - NONE
Arguments - (none)
Thanks
MemMaid worked for me too
Hello,
I had the same problem, every notifications didn't display.
I installed DinarSoft MemMaid v2.3, in the QuickClean tab I checked the 4 Notifications-related lines and I performed the cleaning process.
Then a soft reset with the stylus & the small button next to the usb connector.
And then : no more orange led flashes, no more unwanted alarm sounds. And I can use the alarm or calendar notifications again. It works.
Thank you for your posts.

Multiple reminders for same alarm

I have the following problem and am cutious if anybody has the same problem and eventually found solutions?
Sometimes I get multiple reminders for the same alarm. This does not happen for alarms from calender. I get this only from alarms which have been set by the Clocks and Alarms menu. When the time comes it gives me multiple reminders. Sometimes up to five and I nedd to press 5 times Dismiss.
Does nobody have a solution. Is it something to do with the notification queue????. How can I access this qued notification?
i like it this way! this way i will WAKE UP instead of falling back to sleep
you can choose the number of reminders / time between reminders from the settings,
I don't use it though I use pocket music player and Megasoft Pocket Clock
I'm currently getting the same alram non stop with no dismiss option any way tot stop that this is the second time it has happened and the last time I had to hard reset. Fo rnow I have turned off all sounds but still get it vibrating
Any Ideas?
google for Check Notification
to detect any of the 'alerts' that are bugging you and delete them
bigballs said:
I'm currently getting the same alram non stop with no dismiss option any way tot stop that this is the second time it has happened and the last time I had to hard reset. Fo rnow I have turned off all sounds but still get it vibrating
Any Ideas?
Click to expand...
Click to collapse
Get MemMaid, or Pocket Mechanic, both tools great for sorting out a few problems, one of which is duplicate alarms...
i have a problem with alarms being 1 hour late because the device apears to change its mind about which time zone it's in!

alarm turning on even though i dont have it selected

I have WM6 and i have an alarm call called "earlies" which, when selected, should wake me up at 06:00. It's not selected at the moment and yet it is still going off each morning at 06:00. i am assuming there is a reg setting that i can manually disable this?
help me please.

[Q] Alarm won't turn off - help please?

Okay, I am facing a weird bug. In the past I needed an alarm for early morning, so I set one on my phone. It served me well. However, now I don't need the alarm so I deleted it. But, the alarm still goes off.
The odd thing is no alarm is listed in the alarm app
Help please?
Check your calendar application. Maybe you set it as a recurring alarm?
I did set it as a daily reoccurring alarm but once I deleted it, it should be gone, no?
(Nothing in calendar.)

Categories

Resources