Related
I am so upset, i just got my universal on saturday, i have been enjoying it but i could not use it as a phone because i needed to unlock it. I had the damn thing in my pocket and was on a phone call on my other phone in the car, in my front pocket, not back. Got out of the car, walked into the hall and opened it and there it was, A BIG UGLY black gash on the screen, the screen cracked, it just in my pocket!!, closed too! Where can i get this fixed, i am in the states and the phone is not sold here so i don't know here to get it fixed. Please, the LCD liquid has made a dark smere across the left side, i need help, please. Also what is the best case to get, so this does not happen again?
Check Pocket PC Techs. They will replace the screen for you.
how?
Please how do i get to them?
ok
ok, thanks, thats really expensive, ok, what is best case to use for this device?
Broken screen resolution
Ok thank God i don't have to pay over $250 to get my screen fixed. T-mobile Uk agreed to replace it since it was gotten through them. The way this still happened baffels me. I have had my MDA3 for over 6 months and it has fallen about 4 times, and stuff and it still works fine, but the exec screen broke while in my pocket. Strange. My question is that, for people who have an exec, do you leave it in laptop mode or tablet mode most of the time, and have u had to replace yours or do a repair?
Broke my Wizard to, im so damn worried about my universal. Don't got the money over to fix that screen if it's gettin broke, have had almost all pda phones you can get in .se and never cracked any screen but damn qtek ive done it on
I use a krusell case but not because it is the best but because it was the only one available on hand. It cost 29€ here in spain.
Also, I never leave it in tablet mode in my pocket. Always in Laptop mode.
It's only in tablet mode while it's on my desk.
Purchase a metal case. You can keep it in PDA mode and view the screen while inside the case. It also has a belt clip
UD.
Thanks
I pray the second one does not break when it arrives, it is too expensive to fix these things. Can you post a link to the case? i have looked at most of the cases on here, i think i will go with the one for the T-mobile side kick 2, it is cheaper and looks ok. I just need something with a strong belt hook and is well paded, so if it is on my hip and something actually presses on it this time, it will not break.
I must admit , I feel my Unirversal is more vunerable than any other device I have ever owned - can't quit put my finger on why , but I feel as if it wouldn't survive being dropped as well as myXDA, XDAII , s100 , or wizard for that matter !
The XDA / XDAII came with a nice case vertical flip case with a metal plate in the flap - which would be ideal in my eyes , but I have only seen one like that on Ebay for the exec (Via hong kong! ) and I suspect the one you actaully receive may be different (horizontal )
here is the krusell case link:
http://www.krusell.se/product.php?productID=2095&category=7
and here is a metal case link:
http://www.proporta.com/F02/PPF02P05.php?t_id=1355&t_mode=des
hope this helps
I had an XDA 3 and used a metal case. BIG ERROR!
one day the belt clip connector of the case broke and the device fell down, cracking the screen.
For my Mda Pro I ordered one Piel Frama case, which has not only a belt clip but also a fixed belt latch (you can take of original clip and then below) which should not break.
Also this case protects the device from all sides and seems to be thick enough to give it good protection in case of falls.
Details here:
http://www.pielframa.net/prodi.asp?ID=412
case
Replies, thank you all for your reply, i think i will go with a leather case, the metal ones are not attractive. The funny thing is that i just sent the phone back today, now it is gone, and as i got home, i got the unlock code from t-mobile UK!!!. DAMN!! I think i just have a bad luck week.
You can get cheap leather case with all sort of design off Ebay. I got mine from there and the quality is not bad at all
Piel Frama does NOT have a belt clip.
UD.
P.S. Some reviews:
Piel Frama leather case
http://pocketpcdubai.com/i-mate_pielframa/jasjar/review.html
Brando Metal Case
http://pocketpcdubai.com/reviews/brando/metalcases/jasjar/review.html
Proporta Alu-leather case
http://pocketpcdubai.com/reviews/Proporta/cases/jasjar/review.html
@universaldoc
check the link, I posted. I speak about a different Pielframe case. And this one HAS A BELT CLIP.
@BlackICE,
My bad! Thank for you for the correction. I thought you were referring to the standard case.
UD.
Just as an observation, the reason the screen would crack in your pocket would be something sharp hitting it? Could this not be easily solved by always making sure that the side of the HTC with the screen on it always faces towards your leg and not towards the outside? Sounds like an easier option than buying a metal case anyway :?
i usually keep my xda exec in my front pocket ... i'm not really a fan of cases esp. for the htc universals .... somewhat tacky ...
HTC
I had 15 cents in my pocket when it happened but i doubt that had anything to do with, it may have but with the way the coins were, i don't think so. I think maybe cause my knees bent, it stretched my trousers and that caused it (can't stop thinking about that day, ::sob::sob:.
With my MDA3, i always used the case that came with it, i like that, cause the case only holds the device. Thanks for your advice, :wink: i just ordered that ALU-Leather yesterday, but i am thinking it will be uncomfortable answering the phone with that leather all around it. I will see how it works out when it gets here but protection is number one now, i can't keep shipping it back to the UK. To people with cases that house the unit, do you answer the phone with the leather all around the unit or u use bluetooth, or you take it out of the case?
I wanted to know if anyone had any good or bad experiences with clear cases like this one
http://www.amazon.com/AT-Fuze-Activ..._75?ie=UTF8&s=wireless&qid=1227055029&sr=1-75
I want to get a case that will protect the fuze from drops. I drop my previous phone the 8525 twice and because I'm in a city the first drop was on one of those metal grates and the phones edges got scratched up more than I would have liked and the second time was on a concrete side walk. Both times I was pulling out my phone from my case on my hip and lost grip. I was interested in getting a case that I can pull my phone from the top. That may help prevent me losing grip. But I still want to put something on the phone incase I loss grip again and drop the phone. And I was looking for something that will not put that much bulk or take away from the looks of the phone. If anyone has any suggestions or experence with cases or skins that I can put on the phone to try and protect it from a drop I would like to read about it
I had the boxwave clear case for my 8525, and it saved my phone several times. There were a couple problems though. For starters, the gaps between the plastic and the phone get covered in dirt, and you have to remove the case to clean it out. The case snaps on to your phone will little plastic tabs. If one of those breaks, part of your case will be loose.
However, I will certainly give the case full marks for protecting my phone. It survived drops, throws, smashes, and just about everything else you can imagine would happen if a 1 year old got a hold of your phone. So, if you don't really care about the phone getting dirty and whatnot, the boxwave case provides some good protection while adding a minimal amount of bulk to the phone.
I had a case similar for my HTC Tilt and I loved it, it saved my phone several times too and it has a belt clip which I loved! Also if you get that case they have it on eBay for cheaper... I believe it was $9.99 or something like that, I was looking earlier today and saw it on there but I bought a Hot Pink Rubberized one instead. But I like the cases, of course it's your own personal preference though. Hope I'm not too late with the eBay info though lol. Here's my search link, there are a couple cases for it.
http://cell-phones.shop.ebay.com/it...=m270.l1313&_odkw=htc+touch+pro&_osacat=20336
Search for the body glove case. It is rubberized, not the best looking of cases, but might protect it the best. I bought mine on ebay.
I bought the official AT&T 2-piece case for $29.99 (-30% FAN discount).
It fits, but tabs that hold it on make the phone seem like it's going to get stuck in a half open position.
I wanted to thank everyone for there suggestions.
NotATreoFan is this the case you bought at ATT
http://forum.xda-developers.com/showthread.php?t=446555
Because thats one of the options I was thinking of or the crystal case. I'm going to The ATT store to check it out.
How do you like your case?
Thanks
rrider77 said:
I wanted to thank everyone for there suggestions.
NotATreoFan is this the case you bought at ATT
http://forum.xda-developers.com/showthread.php?t=446555
Because thats one of the options I was thinking of or the crystal case. I'm going to The ATT store to check it out.
How do you like your case?
Thanks
Click to expand...
Click to collapse
That's the case.
$1.99 free shipping.
http://forum.xda-developers.com/showthread.php?t=450611
HTC Touch Pro Case Protection
For those of you who have a Touch Pro and have the Sprint included HTC brand case, you probably have the same gripe about it as I do. There is very little protection to the side of the phone as the OEM case has several gaps in it. Also using the case for a few weeks, the velcro begins to lose its hold and the case may not shut properly. I have customized my case to fix these problems and would encourage others to do the same. Here is what you will need:
-Small elastic material (available at any craft store or Wal-Mart!)
-3M double sided tape
-Velcro strips
-5 minute epoxy (Wal-Mart)
Directions: Cut a piece of elastic the same length as the open portion of the side of the case. Cut out small pieces of double sided tape and apply to the black cross sections of the case. Apply the elastic and cut to size. For the the velcro fix on the front of the phone, cut a strip of the velcro and fit to size on the front of the case. Mix the 5 minute epoxy and apply to the back of the velcro strip you just cut. Apply the velcro to the case and allow to dry (apply pressure to ensure a tight fit). Enjoy your case!
emobileinhand.com has teamed up with Amazon and they're selling the Seidio Innocase for $24.85 shipped. I added Priority shipping and the total was $26.85. I bought my first Innocase from them but I got wasted on St. Patricks Day and broke it. The phone is fine, thank God.
The Seidio Innocase is hands down, THE BEST case for the Kaiser. The holster (strongly recommended) really keeps the device safe.
Right now, I'm using my Boxwave as a backup. I like it, but the belt clip forces you to wear it with the screen facing out which could lead to damage.
This is a great deal.
http://emobile-in-hand.amazonwebstore.com/search.htm?keyword=B0012Y4IQA
I have this case and imo its overpriced crap. The thing rarely stays on all the way. It seems there's always a corner or something to press down on again to get it to stay on it.
If you want a nice case cheap, just buy a cheapy. I bought one off Amazon for less than $5 and it stays on all the time never have to worry about it at all. The only difference is the holster and finish. The Seido has a nicer feel to it due some coating they put on it. And the holster for the cheapy is one of those screw on job's.
But hey if you want to spend $20 on a coating for something that will fall off, go ahead its on sale!!
Satisfied
I've used it for 2 weeks now and it stays on, feels great on hand, and haven't found any peeling of the rubberized layer.
I used to put on PDAir Aluminium for my SE M600 and it also go roughed up. So you can imagine my usage habit and this Seidio performs beyond my expectation.
Yea, I dunno man, I never have had a problem with my Seidio. You just have to make sure you have it on correctly. The boxwave is a very close second though. I wish Boxwave had a holster similar to Seidio's.
The great thing about the Boxwave is that it has a "notch" for the reset hole so it's almost impossible to miss and end up messing up your USB port.
-haze- said:
Yea, I dunno man, I never have had a problem with my Seidio. You just have to make sure you have it on correctly.
Click to expand...
Click to collapse
I don't know how someone could fit it on incorrectly. It only goes on one way and its pretty obvious which way that is.
My biggest problem w/the case is that if i slide that keyboard out it will knock off the bottom hinges.
IMO its not a secure case. Is it designed well as far as all the little notches and slots? Yes. Does it feel nice in your hand? Yes. Does it look nice? Yes. Is it worth more than $5? No.
Is this really much different to the 'crystal cases' that you can buy from the markets and crack after a week in your pocket?
Dont u dare!
Dont even think about buying this pathetic case. after much debate i bought this hoping it would protect my kaiser. i spent a week looking for the perfect case, went through everything i could find. i received the case, it snapped on easily, i hardly had an issue with the little hinges, the case lasted me a good 18 months. the rubberised outside is a nice touch, imo the phone doesnt look good with the case, but i stuck with it coz it protects your phone, right? well not quite. what the assholes at seidio dont tell you is that yeah they've rubberised the outside but done nothing inside the case. its plastic, which means after a couple of months you start to accumulate **** inbetween the case and the outside of the fone. ordinarily it might not be a problem, but if like me the fone spends most of its time in the back pocket, in bags etc then any grainy kind of crap between a plastic cover and a kaiser = ? you guessed it, major dents, scratches, gouges etc. i didnt check the phone for a good 3 months after i put the cover on, when i took it back off my phone looked like id rolled it down a hill and then threw it back up again. its ruined my kaiser and now i cant sell it on unless i buy another housing and put it on myself. it may be error on my part assuming that a protective case protects the outside of your fone, i dont know. this is my experience of this ****ty case, take it or leave. i think you'd be better off buying the cheapy crystal ones, coz then atleast you can see when your phone needs cleaning and you dont end up ruining it.
sorry for going on and on.
paradoox
Thanks for your feedback paradoox,
anyone else have similar long term reports?
On a separate note, i found out that Boxwave do a very similar (nearly identical) case and holster. Anyone handled both the Seidio and Boxwave for a comparison?
yep thats pretty much what i thought
paradoox said:
Dont even think about buying this pathetic case. after much debate i bought this hoping it would protect my kaiser. i spent a week looking for the perfect case, went through everything i could find. i received the case, it snapped on easily, i hardly had an issue with the little hinges, the case lasted me a good 18 months. the rubberised outside is a nice touch, imo the phone doesnt look good with the case, but i stuck with it coz it protects your phone, right? well not quite. what the assholes at seidio dont tell you is that yeah they've rubberised the outside but done nothing inside the case. its plastic, which means after a couple of months you start to accumulate **** inbetween the case and the outside of the fone. ordinarily it might not be a problem, but if like me the fone spends most of its time in the back pocket, in bags etc then any grainy kind of crap between a plastic cover and a kaiser = ? you guessed it, major dents, scratches, gouges etc. i didnt check the phone for a good 3 months after i put the cover on, when i took it back off my phone looked like id rolled it down a hill and then threw it back up again. its ruined my kaiser and now i cant sell it on unless i buy another housing and put it on myself. it may be error on my part assuming that a protective case protects the outside of your fone, i dont know. this is my experience of this ****ty case, take it or leave. i think you'd be better off buying the cheapy crystal ones, coz then atleast you can see when your phone needs cleaning and you dont end up ruining it.
sorry for going on and on.
paradoox
Click to expand...
Click to collapse
I had a similar experience as paradoox, bought it, thought it looked crap but left it on to protect fone, few weeks later discovered one of the little little tabs holding the top half of the case on snapped so it wouldn't stay on.. this is when i found scratches and dents under the case too. imo ... the case is just too expensive for how it performs... better to go thu 3 cheapies i think..
It all depends on your usage and carry habit.
I carry my phone on a leather pouch on my belt, with the Seidio snuggly fit on it, so it won't slip whatsoever.
It does make sense that some grits, etc. will get under the case, but I just opened it up 1-2 weeks ago and found nothing. Remember, I live in Jakarta, taking public buses and lots of fumes, dust, etc. around the air.
Of course it has to be also counted that I rarely open my phone in public (dusty, windy area) mainly for security reasons. I don't flaunt my belongings. I worked in an office building, and the phone is often out, but it's a clean environment.
Again, YMMV. For someone who wants no dust, I read somewhere there's a waterproof case for Kaiser ..
For my use, Seidio works great.
I have ordered a few cases before I was told that the TMobile USA HD2 is a slightly different size than others and now I have received those cases and they don't fit, now I am dissapointed and back out on the search for a case that actually looks nice and fits as well...Any advice? One case I do like is this :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150398009772&ssPageName=STRK:MEWNX:IT
But please dont let this limit your advice/recommendations... I am looking for any kind of case other than a leather pouch type case and I also do not wish to have those leather cases which have a flap that covers the screen..... any advice ?
I have been using a T-mobile Wing case I found for $5 at the tmo store on clearance. Good fit but it snaps on the front and it makes me nervous every time i push on them and they push against the glass. Still looking for a better case.
Someone told me the type that are held closed using a magnet may cause the famed "newton ring" so i'm not sure what to get.
erebusting said:
I have ordered a few cases before I was told that the TMobile USA HD2 is a slightly different size than others and now I have received those cases and they don't fit, now I am dissapointed and back out on the search for a case that actually looks nice and fits as well...Any advice? One case I do like is this :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150398009772&ssPageName=STRK:MEWNX:IT
But please dont let this limit your advice/recommendations... I am looking for any kind of case other than a leather pouch type case and I also do not wish to have those leather cases which have a flap that covers the screen..... any advice ?
Click to expand...
Click to collapse
Don't get that one. I ordered the exact one weeks before I got TMOUS hd2, and it doesn't fit.
I mean, it fits, but not perfectly. Plus, the material was too rubbery.
I don't even know if that's the word, but it's very shiny and doesn't feel that great in my hands.
It gives killer grip on any surface, though.
But once again, that cover does not fit your device perfectly.
I threw it away. such a waste...
I'm using the default gel skin it came with.
It's very nice, surprisingly. it's not the normal silicone cover that attracts every sort of dust in your pocket.
yeah i ordered two cases off ebay and one came in guess what they don't fit lol..awaiting more cases
I ordered and received that case already, but I wanted one that fits my phone...it does not fit completely but it will do , it is very nice in my opinion, shiny and slick , I do not like the stock one too much as it causes my fingers to feel dry and sticks in my pockets so it doesn't slide out easily enough...
any advice...anything like a 'barely there' case for our phone ?...
please post any ideas/ advice/ experiences/ anything..
jcbofkc said:
Someone told me the type that are held closed using a magnet may cause the famed "newton ring" so i'm not sure what to get.
Click to expand...
Click to collapse
I don't have an HD2, yet, but...
I've used a horizontal belt holster with a magnetic clasp for my TP2 since I got it in September. It's in the holster everyday, and I have yet to see a Newton Ring develop on my screen.
When I get an HD2, I'll be calling my local T-Mo store every week to inquire about future cases (like the one erebusting purchased) for the HD2 -- I'm afraid a 3ft drop would cause the thin phone to break in half! I also want a thin, hard case so I can still put the phone in a horizontal belt holster (I hate putting my phones in my pants pockets).
Been to Amazon, Newegg, Best Buy, Staples, Target, Office Depot, Office Max and Walmart and am unable to find a reasonably priced case for my tab. Even the expensive ones are crap. The Targus Truss is widely available but too expensive for what it is and really not great at all. I can't remember all the other options I've man-handled in the past 48 hrs. At this point in my frustration, I'm looking for a generic zippered case that has a slightly hardened front and back cover (I realize it's just stiff cardboard). Ideally, I'm looking for black/dark (read not pink,yellow etc.) with edges slightly past the ends of tab. The closure doesn't matter (zippered, magnetic, velcro). There can be a bit of extra room if need be but not so much that the tab rattles around and causes imbalance in bag. A bit of protection from slight bumps or scratches would be nice but not something that can be flung across room. Currently my tab resides in a bubble padded mailing envelope that I can't recall who mailed to my house. Any ideas?
Yea I want a hot pink leather tight fitting.Acer case like but real quality
Gotta love hot pink
same size
Since its the same size of some of the others, how about looking on ebay? Its flooded with some for ones the same size.
I use a soft case that came with a laptop set. Has a Velcro strap in it, and it fits snug into it and enough spots for chargers, pad of paper, pens, etc. I'll try to update this with a pic later.
And its pink...lol
in thailand we do not have accessories...
so far just official case (and not easy to find)
no film protection for screen
have to wait one more month for get the cable very expensive
no spare part at all .... (better buy a new tablet than to repair it seems...)
and if wanna buy from amazon or else... 300% taxes... woOooow
and worst of it... not a lot of choices GENUINE
I want the TDP case... and a SCREEN SHIELD!!!
acericoniagirl said:
Since its the same size of some of the others, how about looking on ebay? Its flooded with some for ones the same size.
I use a soft case that came with a laptop set. Has a Velcro strap in it, and it fits snug into it and enough spots for chargers, pad of paper, pens, etc. I'll try to update this with a pic later.
And its pink...lol
Click to expand...
Click to collapse
Yeah, right now this is what I'm considering on ebay
http://cgi.ebay.com/Carrying-Bag-Case-Cover-Apple-Ipad-ACER-A500-Iconia-/330595484639?pt=US_Tablet_Accessories&hash=item4cf906c3df
Kind of a shot in the dark as they don't give dimensions. If I get it, I'll probably cut out the net pocket.