I am trying to establish a VPN connection but cannot get the connection to work.
I am using the built in MS VPN client of Win Mobile v5.0 (5.1.1700 build 14352.0.1.0)
I am having real problems getting a VPN connection set up with our network.
I have tried both PPTP and L2PT
When L2TP, I was authenticating with a preshared key
Firewall logs show PPTP negotiation successful, and issues a VPN IP address to the device
It can ping the firewall external interface, but times-out trying to reach an internal address
The VPN session is established, but the firewall logs don't register either deny or allow traffic for each internal ping request, rather the firewall packet error count increments for each failed attempt.
Any help is greatly appreciated.
I had problems with PPTP - gave up
I hate the way Windows mobile labels connections.
I connect to many customers with PC Anywhere, VNC, SSH etc and I have access via serveral different windows PPTP VPN.
Like you I setup the details in connections and try to dial.
Nothing seems to happen. The connect option does not change to disconnect. So I assume it is not connected.
I have a feeling these connection do not work over WIFI. and perhaps work over T-mobile 3g only, to maximise data revenues.
Seems very buggy to me. I would really like someone to post a working example/Instructions. Can I get a refund on my MDA PRo?
MS please note it is not a connection to my work or an internet connection it is to a customer for remote support, likewise I often connect remotely to my home via PPTP from my office.
confirmed VPN works over t-mobile 3g not Wifi
SEems the VPN links only work over 3g not Wi FI.
I'm using a PPTP connection over either 3G of WIFI depending on te active connection.
- When WIFI is active the PPTP connection connects using WIFI (I can switch off the phone, so it must be using that one)
- When no WIFI connection is active it automatically connects to 3G first, and than starts the PPTP session
In network management I'v set:
Internet:
Internet (the one containing the 3G connection)
select 'this network connects to the Internet' on the proxy tab.
private network:
My Work (the one that contains the vpn connection)
do NOT select 'this network connects to the Internet' on the proxy tab.
So as you can see, nothing special (I'm using a Qtek 9000 with standard Wm5 ROM)
I am having issues connecting to a PPTP VPN using the inbuilt Connection on my dopod d810 (WM6 Official).
I have set it up (In the connections under settings) and try to connect.
It doesn't connect, however I get no error message and it seems strange that I have to go to the edit settings part of the connection to actually try and connect.
I was reading on WM5 that there was a VPN connection under connections?
Can anyone give me some clues on how to troubleshoot?
Cheers
Hello All.
I have a problem with sync through VPN.
Asus P535, WM6.
My company have Exchange Server, I have remote access through VPN to this server. All setting for GPRS, WiFi, VPN is correct.
I use GPRS connection for ActiveSync through VPN when I not in office - it is work good.
When I came to office - I switch to WiFi connection and turn off VPN - it is work good too.
But when I switch back to GPRS connection, turn on VPN - I have a problem. After esteablish GPRS connection blink message "VPN connection", after this GPRS switch off and pop-up message "VPN server error". But WEB serfing work good.
My sollution for this problem - only reinstall Windows.
Maybe any can halp me ?
Thank you! (sorry for my bad english)
I have an Asus P750. Under My ISP I have my Providers GPRS Settings and under my Work Network I have only one VPN Connection, Wi-Fi is set to connect to Internet. When I connect the VPN it will first connect to the GPRS and then the VPN and works fine. If in my WiFi List there is a Network which was connected only once and is then disconected the VPN will not work anymore. It will connect the GPRS Connection and the Moment the VPN starts it will drop the GPRS Connection and give me the Error Message VPN Server Problem........ If I then delete all WiFi Connections and re-boot the Machine then the VPN over GPRS works fine till the next time I use WiFi. Everything else works and connects fine. Any Ideas anybody...
I have problem with VPN connection to my privat network.
VPN connection works if I am on cable, wifi, but whan I am connected over 3G, HSDPA, than my connection works for about 5 seconds and than I hear sound from WM6 side that my 3G connection was broaken.
I can go to WM side and try with VPN connection there and it wont connect. But strange thing is, that if my VISTA is shutdown than I CAN connect with WM6 to my VPN server.
Please help if sombody had the same problem...
bye
Matkosan
I setup Hamachi yesterday on my Shift, on both the WM and Vista sides of the device and it worked perfectly. Of course, each "side" looks like a completely different node on the network, but it was really cool to remote desktop into my home and office machines from VM.
Regards,
Dave
Which VPN client software and version are you using? Or is this window PPTP vpn?
I had some problems with Cisco VPN Dialer client and the pasword manager function of the finger print reading software. Once I turned off the password manger function both the VPN dialer and finger print reader are happy to coexist. ( issue might not be problem if you are not using a RSA fob like I have to)
I am using both on my shift Cisco VPN for work and the Windows PPTP connection to reach my home network. So I can confirm that they both work from Vista and that windows PPTP works from WM6.
Nothing special, just window PPTP vpn client. My internet connection works perpectly, but when I make a VPN connection, 3G just drops the line and than reconects when I disconnect VPN connection... But VPN is allways working for about 5 seconds, a few successful pings...
I just used the magic button FN+F3 and whn vista come up i have the same problem. That means that tre problem resides somewhere in WM part. I am still looking... The problem could be that my service provider and my contry are not on the shifts list, so there could be some connecion settings problems... On my other sony vaio the same data card and HSDPA connection and VPN works OK.
Now I am playing with WM side. I can establish VPN connection to my server, bat as soon as I try to send over some data it simply diskonects 3G connection and that establish it again, without VPN connection afcourse.
So my connection to VPN is working, but when I start internet explread try to conect to any web site, 3G connection restarts.
Any suggestions or somthing....
Matejs said:
Nothing special, just window PPTP vpn client. My internet connection works perpectly, but when I make a VPN connection, 3G just drops the line and than reconects when I disconnect VPN connection... But VPN is allways working for about 5 seconds, a few successful pings...
Click to expand...
Click to collapse
Hi.
Is there a fix to this? I am getting exactly the same problem. 3G works for surfing on vista and exchange push/browsing on WM side - As soon as I put a pptp VPN across to the work network, the 3G on the WM side drops, and if I am looking at m network connections in Vista, the "LOCAL AREA CONNECTION 2" network "card" disappears from network settings and the VPN stops.
If I disconnect the VPN, the 3G connection restores itself and I can browse again.
any help appreciated as I need pptp to work so I can ditch my laptop!
PDAMerlin
Have you tried going into the TCP/IP properties of the VPN connection, then 'Advanced' and removed the tick from 'use default gateway on remote network'. That fix the problem for me.
Aardvark1978 said:
Have you tried going into the TCP/IP properties of the VPN connection, then 'Advanced' and removed the tick from 'use default gateway on remote network'. That fix the problem for me.
Click to expand...
Click to collapse
Yes, I did that, but then the internet works fine and the VPN and the 3G stay up okay, but everything seems to go to the local internet and nothing goes via the VPN tunnel.
PDAMelrin
Hi,
Probably you have to change the MTU settings in the Local Area Connection, here's the command:
netsh interface ipv4 set subinterface "Local Area Connection" mtu=1440 store=persistent
1440 is only a suggestion. If you low more the MTU you will notice a decrease in speed/bandwith but 1440 will be unnoticeable and will let VPN connections work.
Mobiplayer said:
Hi,
Probably you have to change the MTU settings in the Local Area Connection, here's the command:
netsh interface ipv4 set subinterface "Local Area Connection" mtu=1440 store=persistent
1440 is only a suggestion. If you low more the MTU you will notice a decrease in speed/bandwith but 1440 will be unnoticeable and will let VPN connections work.
Click to expand...
Click to collapse
Have you actually got a VPN session working? From what I can see, the problem is the way that the Vista side uses the modem.
If I do a route print from Vista with the VPN up, it doesn't add any routes, so sends all traffic to 192.168.160.1, which appears to be the IP of the modem/WM side of the device.
If I manually put in
ROUTE ADD 0.0.0.0 MASK 0.0.0.0 192.168.99.1
Which is the IP of the VPN router, all traffic gets routed out down the VPN and it works for about 5 minutes, then the "Local Area Connection" network card in Manage Networks, disappears. If I then drop the VPN (because strangely it stays up) the LAC card comes back...
PDAMerlin
PDAMerlin said:
Have you actually got a VPN session working? From what I can see, the problem is the way that the Vista side uses the modem.
If I do a route print from Vista with the VPN up, it doesn't add any routes, so sends all traffic to 192.168.160.1, which appears to be the IP of the modem/WM side of the device.
If I manually put in
ROUTE ADD 0.0.0.0 MASK 0.0.0.0 192.168.99.1
Which is the IP of the VPN router, all traffic gets routed out down the VPN and it works for about 5 minutes, then the "Local Area Connection" network card in Manage Networks, disappears. If I then drop the VPN (because strangely it stays up) the LAC card comes back...
PDAMerlin
Click to expand...
Click to collapse
I didn't tried to establish a VPN with my Shift, but I found this MTU problem with many GPRS and 3G connections when establishing VPN (PPTP and also IPSEC ones).
I don't see how to help you more, sorry
PDAMerlin said:
Have you actually got a VPN session working? From what I can see, the problem is the way that the Vista side uses the modem.
If I do a route print from Vista with the VPN up, it doesn't add any routes, so sends all traffic to 192.168.160.1, which appears to be the IP of the modem/WM side of the device.
If I manually put in
ROUTE ADD 0.0.0.0 MASK 0.0.0.0 192.168.99.1
Which is the IP of the VPN router, all traffic gets routed out down the VPN and it works for about 5 minutes, then the "Local Area Connection" network card in Manage Networks, disappears. If I then drop the VPN (because strangely it stays up) the LAC card comes back...
PDAMerlin
Click to expand...
Click to collapse
vista utilizes ICS from WM6 to get the connection. that's why you see 192.168.0.1
We had a similar problem with Cisco VPN Client constantly disconnecting when using 3G Cards. We use a Cisco ASA 5510.
One solution is to disable the Keep Alive function in the ASA for the specific VPN Profile.
Hope that helps!
Try your Networks VPN APN - it could be an IP conflict.
I tried cisco vpn client over hsdpa and it worked.
I still have problem connecting with microsoft PPTP client. After few seconds connection vista-wm just drops and comes back again when PPTP client disconects.
Problem is ICS from WM6 in my appinion...
Please help me
Im facing a strange problème
When i use 3g data on lenovo a6000 4.4.4 every thing is normal even when i share internet with others every thing is normal but once starting a vpn connexion like openvpn or other applications the 3g data drops ane the vpn reconnect
This is only in 4.4.4 but when i updated a6000 to lalippop every thing is normal but its a slow slow rom please some one help me