I have t-mobile wing, I want upgrade to russian non-oficial wm6. I installed Hard spl. But I can not install Russian WM6 (Error 244 INVALID MODEL ID). How to me to install Russian WM6?
Please help me!
Error 244 INVALID MODEL ID. How i can change Model iD or install system with skip of test of the model, vendor, itc.
----- please calm down ----- moderator
First of all, if no one has answered, it's because either no one was online, or the people who were, did not know the answer to your question.
If you intalled HardSPL, you should be able to install whatever rom you want on your device, so I don't understand why you're having that problem.
You can try using USPL, in order to bypass the CID lock.
What number was your SPL before you installed? If it was 1. something, then you bricked your device. If it was 4.x then you're probably trying to install an official RUU into the HardSPL device. HardSPL looks for HERA**** and most official RUU's will be something like HERA100. If it's a Herald RUU, please link it here.
We should report the SPL 1xx problem to whoever made the USPL (POF I think) and see what he has to say about it... maybe he can solve the problem.
Related
Hello..i am a newbie in flashing the rom. I have read many posts regarding on how to flash the rom. My questions are :
1. Do I need to use the unlocking CID program before I flash the rom or should I just flash it using the NoVendor rom?
2. If I don't use the unlocking CID, will I able to reflash the rom again back to other versions or downgrade to the one I am having now?
Currently the rom I have now is is German language in which I cannot understand at all. I wanna switch to English version. Your help are greatly appreciate.
Thanx
no one can help me???pleasssseeeeeeee
Instead of waiting and bumping your own post .. why don't you do a search?
http://forum.xda-developers.com/viewtopic.php?t=49913&highlight=
In general, you need to CID unlock your device before any flashing. You need to unlock it after every hard reset too.
No harm CID unlocking your phone anyway. However, it may harm you if you don't CID unlock it.
but I still don't understand what's the different between CID unlock and NoVendor rom..from what i read from this forum, CID unlock is important cause it enable users to change/upgrade the rom. but there aren't any information that said what does the NoVendor rom does (or maybe I didn't see it).
so if the NoVendor rom is similar to the CID unlock, then i guess i dun need to use the CID unlock?or should i still use it?
Briefly, if you just want to upgrade your ROM to other vender's newer ROM, you could use that Machinegod's NoVendor ID upgrade utility. If you are happy with that new ROM, then you don't have to unlock your device's CID.
However, if you need to downgrade your device to other vender's older ROM, then you will have to unlock its CID first. Otherwise, the utility will tell that it can upgrade only. The major benefit from unlocking CID is you can up/downgrade your device to any vender's ROM.
Problem is that there is no reliable utility to unlock the CID for device with AKU2 ROM yet except that from Thailand website. Read more details here: http://forum.xda-developers.com/viewtopic.php?t=52244
Hope this helps.
This utilities won't work with the last dopod rom SPL 2.15.
This rom is great but if you choose to upgrade to it, you won't be able to change until another downgrade tool is released.
gee..thanx a lot....i will try to upgrade it now.really thanx a lot...
Hi,
I've just bought my wife a Herald (P4350) here in Moscow. It comes with Windows Mobile 5 in Russian and we really need to change it to English. I've been referred here as the best place for help on how to do this but looking around this forum there is a huge variety of information that is quite confusing for the noob (which I am for this type of thing!)
Can anyone tell me how to change the ROM? I don't know if it's cid locked or anything else! You'll need to tell me how I can check, if you don't mind. It's just branded as HTC. I don't mind if the ROM is WMM 5 or 6 as long as it's in English.
Thanks!
Upgrade your phone with the official WM6 HTC ROM. Then if it's still not in english, use any of our custom ROMs as they're almost all in English.
IF you decide to HardSPL, please take note of the SPL version you have or you will brick your device.
ivanmmj said:
Upgrade your phone with the official WM6 HTC ROM. Then if it's still not in english, use any of our custom ROMs as they're almost all in English.
IF you decide to HardSPL, please take note of the SPL version you have or you will brick your device.
Click to expand...
Click to collapse
Thanks for the advice ivanmmj. The official update is in Russian as this is the only option it gives to download. Can you please tell me what HardSPL means? I notice other people mentioning it but I don't know what it means.
[edit] It seems that HardSPL is something that provides a more foolproof way of changing ROMS. As I am a complete newbie at this, I am worried of trying something that will render my wife's phone useless! She needs it for work.
Is it possible to upgrade my ROM to the official English WM6 ROM found in the Herald WIKI of this site? Will I have to unlock the CID?
You cannot use the official WM6 update to get it in English,
you will get a Invalid Vendor ID error, You should flash the official
WM6 RUssian first, then download USPL.
Now Download the desired ROM (pick one you like there are enough)
And always read instructions!!
USPL
RUU Russian
Read the Instructions in the USPL folder,
Put the downloaded ROM in .nbh format in the RUU folder.
If you have questions please post before just trying,
you don't want a Brick like many of us (including me) have owned
auricle said:
Is it possible to upgrade my ROM to the official English WM6 ROM found in the Herald WIKI of this site? Will I have to unlock the CID?
Click to expand...
Click to collapse
No you can't, Invalid Vendor ID error will occur.
If you really want Hrd-SPL,
Upgrade to WM6 Russian first, Hard-SPL needs an SPL higher than4.xx
You can try Hard-SPL indeed, but flash official WM6 first(!!!)
Hard-SPL
*Upload by papamopps
Thanks very much for the info Dutchman! It's becoming clearer.
Where can I find information about each ROM and what they contain? There isn't a WIKI page for them yet.
auricle said:
Thanks very much for the info Dutchman! It's becoming clearer.
Where can I find information about each ROM and what they contain? There isn't a WIKI page for them yet.
Click to expand...
Click to collapse
http://rapidshare.com/users/5EWZ4
every official rom....
Upgrade to the russian WM6 first, before HardSPLing and verify that you have the correct SPL version before you start.
Thank you all kindly for your help. I'll let you know how I get on.
I have a DOPOD C800 with the following specs:
ROM version: 1.7.707.3 WWE
ROM date: 11/01/06
Radio Version: 02.69.90
Protocol Version: 4.1.13.30
ExtROM Version: 1.7.707.106
Operating system: windows mobile 5.0 - OS 5.1.422
Can someone please help me with steps to upgrade it to windows mobile 6/6.1?
I checked on the dopod official site and the upgrade is not available for c800.
So will i have to unlock CID? am basically confused.....can someone help with the steps please?
Thanks in advance.
what is your SPL? If it is over 4, you should HardSPL your phone and flash one of our custom roms, or use the USPL to do it.
Welcome to xda-devs. make sure you do all your research before trying anything.
Try the HTC site
Try the HTC site ...
--The HTC site does not have a official ROM for the Asian Dopod c800.
what is your SPL? If it is over 4, you should HardSPL your phone and flash one of our custom roms, or use the USPL to do it.
-- my SPL is 1.09.0001
it looks like you are stuck with the rom that you have. Try using aserg's method. it's one of our older flashing methods.
search for it in our forums. tip for you- ALWAYS have RUU ready.
Can u pls tell me what the aeserg's method is? and what do u mean by having the RUU always ready? and which RUU are u talking about? I don't think there is a RUU for the DOPOD C800. If there is then pls let me know where it is.
thanks.
--The HTC site does not have a official ROM for the Asian Dopod c800.
I think they should be the same, but only try if you're really desperate to get WM6. I put the htc wm6 (in english) on my htc branded version bought in China with a chinese version of wm5.
czhang- you can buy HTC devices in china. but you can also buy dopod devices. Even if dopod is essentially HTC in china. the RUUs do not work together.
Rangnekarrahul: aserg's method is a way that we were able to flash the first roms made for the herald, before we had USPL and HardSPL. I'm pretty sure you don't have to have a 4+ SPL to do it, but the lack of RUU means that if you mess up, your device is dead.
for more info on aserg's method, look at some of our oldest roms, like touch-it 1 or 2.
do u really think its worth the effort? also can u tell me the actual method(aserg's) I tried finding in the forums but am not really very sure. Some talked about extracting the .nbh file and stuff.....don't know how to do it...if writing in this forum is a pain then u can mail me the procedure at [email protected] .
thanks
I had successfully upgraded my dopod c800 following instructions. Please see my earlier post
regards
I had successfully upgraded my dopod c800 following instructions. Please see my earlier post
---- buddy I will definitely try this. Can you pls let me know where can I find the Official RUU -HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.e xe
?
Thanks again for the help
Thanks for the help guys..... I have upgraded my C800 successfully.....works great now.....
hi all, Gratz for great forum.
I received from friend of mine a brick called HTC - on back is label ARTE100.
it is freeze on bootscreen, that is good for now.
BUT i have information that it is comming from Netherlands, and was locked before.
Someone else is bricked upgrading it without CID unlock beforehand.
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
And is there any available factory ROM from this carrier.
There is no sign or any label on it.
freezing screen is:
IPL 3.04.0001
SPL 3.04.0001
GSM 02.93.90
OS 3.4.0.0
Thank You Very much for any answer .
Stopper said:
hi all, Gratz for great forum.
I received from friend of mine a brick called HTC - on back is label ARTE100.
it is freeze on bootscreen, that is good for now.
BUT i have information that it is comming from Netherlands, and was locked before.
Someone else is bricked upgrading it without CID unlock beforehand.
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
And is there any available factory ROM from this carrier.
There is no sign or any label on it.
freezing screen is:
IPL 3.04.0001
SPL 3.04.0001
GSM 02.93.90
OS 3.4.0.0
Thank You Very much for any answer .
Click to expand...
Click to collapse
imei is usually under the battery
and for availiable shipped rom versions click my signature,go to artenis section and under "upgrading" choose availiable shipped rom versions(or click here),also if you want you can try this before flashing the rom...the instructions are there too,just download the mtty and follow the steps from the link
Stopper said:
[...]
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
[...]
Click to expand...
Click to collapse
I guys, I'm trying to repair my ARTEMIS that I bricked but I don't know which was the original rom because I have flashed with WM6 original rom the day after I bought it.
As asked by Stopper there is a way to know which was original rom so I could try to restore it by SD card?
thank you so much
bye
There's no way through the device (no device flash history), however it's usually the stock carrier ROM so try flashing to that.
kareem9nba said:
There's no way through the device (no device flash history), however it's usually the stock carrier ROM so try flashing to that.
Click to expand...
Click to collapse
The answers are confusing, I have one Mda Tmobile (Artemis) with exactly the same problem. It had german rom originally, and I tied Uspl and had error at the end, maybe the version was lower cause i did not check. Since I could not be able solve it. when you try wwe rom it says invalid vendor Id, any other rom give ivalid model id error.
Is there any solution available for this?
Thanks
Kenny
keke1 said:
The answers are confusing, I have one Mda Tmobile (Artemis) with exactly the same problem. It had german rom originally, and I tied Uspl and had error at the end, maybe the version was lower cause i did not check. Since I could not be able solve it. when you try wwe rom it says invalid vendor Id, any other rom give ivalid model id error.
Is there any solution available for this?
Thanks
Kenny
Click to expand...
Click to collapse
run the official exe
find it's content in users application data (in documents and settings)
copy to somewhere else
delete the spl.nbh and run the ruu
it worked with herald which was danish and now is wwe
haven't tried it on artemis,because it was wwe,but it should work
Dear Sir
I have been given a 02 handset and the customer wants me to upgrade the software , something i have already tried on the 02 uk website but this model is not in this list of software updates avaialble.
This handset details are ARTE200 XDA ON 02 UK
IPL: 3.04.0001
SPL: 3.04.000
GSM: 02.07.90
OS-3.4.0.0
please can you advise what if there are any new soft upgrade for this model available and if so which one and procedure
i will also contribute for this forum
Thankyou
As
The only official upgrade is to windows 6, here is a link to the rom
http://www.4shared.com/file/67458555/cf2192d4/RUU_Artemis_O2_UK_342062_411350_030690_Ship.html
1. Backup any stuff you need from the device
2. Remove sim chip and memory card from device
3. Reset device and sync with windows
4. Run the exe file you downloaded and follow on screen instructions
You can also upgrade the phone to windows 6.1/6.5, but these roms are not official and you or your customer will need to know which rom you want because there are a lot of them. To do that you will also need a little more knowledge on flashing like how to use a program called "uspl" which you flash to your device before you do the upgrade.
I am a new to all this... I have a question ? Do i need to use uspl every time whenever i need an upgrade or is it jut once ? As till no what i have gathered that i need to flash each time i do an upgrade and to flash the device i need to use uspl... please confirm my understanding....
thanks.
No,
if you want to install the official O2 Upgrade you dont have to flash USPL ... this is just required if you want to install a custom rom ...
And you have to flash uspl only once ... Verify the SPL at boottime, it shoul be 1.11 or something like that and shouldnt change while flashing a custom rom. Just if you flash an original rom, the SPL will reset and you have to run uspl again.
Hope, you understand my english