Hi
I have a SPV M5000 used but the mini usb port don't work.
Not charge the battery and not connect to Activesync.
The port was damage internally .. the little white internal piece of plastic was broken and my friend (electronic expert) have changed the broken port with a new.
The contacts is perfectly solder ! test it with elettronic professional tester.
Now my PC detect a new usb port only in Bootloader mode.
how can I do ?
Have you a solution ???
Regards
Alessandro - Venice - Italy
PS: sorry for my little english ...
Hi Alessandro!
my name Slavomir - Belarus - Grodno
My SPV M5000 orange mini usb port don't work. Not conect is komputer
Necessary shemat USB connekt plat m5000
?????
Sorry for my englis
The contacts is mail [email protected]
try this if you have kindda same issue
http://forum.xda-developers.com/showthread.php?t=362898
best of luck..
Related
Hi guys, my 1st post here ,: here goes :, can anyone help me out on the pinouts for the imate jam / xda min . what i want to do if its possible is to sync via a serial cable from my laptop ( does not have usb on it ) to my imate, i know the 5v charging wont be ther but just want it for syncing , hope that make sense
cheers
webtronix said:
Hi guys, my 1st post here ,: here goes :, can anyone help me out on the pinouts for the imate jam / xda min . what i want to do if its possible is to sync via a serial cable from my laptop ( does not have usb on it ) to my imate, i know the 5v charging wont be ther but just want it for syncing , hope that make sense
cheers
Click to expand...
Click to collapse
The connector is a standard mini-usb port:
it has only four pins +V USB+ USB- GND.
It does not carry serial port signals.
Could you use wireless instead?
V
yup, you can sync via wireless or over bluetooth....
Bluetooth might be a problem if he's got no usb. But he might be able to get a usb pcmciacard or bluetooth or wireless card.
V
You could add USB ports to your laptop pretty cheaply.
eg http://www.dabs.com/productview.aspx?Quicklinx=3V5S is £14 and has firewire too. (by the looks of it, the description is somewhat lacking!)
Jamie
Hello, I want to thanks a lot www.turnonyourmobile.com team for repairing my Qtek 9000 mini usb socket. I just send it to their laboratory in London and thei fix it immediately and post it back to me. For any questions about this write me at [email protected]
Hi Folks,
Just wondering... I'm trying to get a little application to work on Hermes PDA and I need to connect a Serial device which has a DB9 RS232 connector...
I know there's a Serial port 'inside' the USB connection on the Hermes, I was wondering if anyone knows of a pinout etc. to enable me to build an adapter to plug in the bottom of the PDA which will then allow me to connect my DB9 RS232 device?
Any help gratefully received!...
Regards,
Rob.
no serial ?????
Hi FactionOne,
there's no serial port on on USB connector .
It's only USB-device port, mixed with audio signals on this port.
Bootloader got also support for USB device port.
So it's possible for the host to emulate serial support. That's all!
At least so far as i know
Regards,
scholbert
better grab you a good ol blue angel
Hi all
have anybody a idea, to solve a broken USB Plug on Universal, for DIY
a explanation a how to to change or solder a new one on the Board ??
thanks for Info
Andreas
hi men... you can solder this mini USB BUT on this board must exist tin connection...
i did to therse two days ago and mi MDA is ready...
but you can´t use a normal inducated melting-iron... you must have a pointed melting-iron...
Jarda
Hi, I have lost the data cable for my u8800 and i need a new one.
have this phone a specific cable or for all android devices is the same?
The problem is that I live in Italy and that phone is not for sale!
thanks for everybody will help me!
matteo
nothing.. anwered by myself.. u8800 use a standard micro usb so is possible to buy one in a store that sells these items!