Hey guys,
been watching the forum for a long while now and I did a comprehensive search on the conference mode but could not find any clear information.
When I try to conference 2 calls, I proceed like this:
1. Call first party
2. Put on HOLD
3. Call second party
4. Open Menu -> Conference
The Blue Angel tells me shortly after: "Cannot conference the call"
I called up my network (Austria/Telering) and asked them and they said that they offer conferencing and do not even have a way to turn it off. So it must be on, the service guy said.
I am running WM6 (5.80.02 WWE, Radio 1.15.00).
Is there anyone out there who can CONFIRM that he can do a conference call on a Blue Angel with WM6 running on it?
That would help A LOT.
Thanks,
Roman
Works fine for me.
I'm using Xplode's WM6 ROM.
JP
Related
Hi all,
I've had my MDA Pro a few days now and I'm really impressed with most of it (except the size, I still can't quite get used to it's wider dimensions...!) - the screen is AMAZING and is one of the big things stopping me going back to a QVGA screen!
I've tried video calls on it - BUT - they don't seem to work.
I've had a mate call me from the "3" network and it worked fine - we could see and hear each other without problems.
When I call him however all he gets is a "incoming call" notification (and not an Incoming Video Call notification) and all he hears is "digtial white noise" - ie, the sound of a FAX machine!
I have had 2 and 4 bars when I've tried making calls, but only 2 bars when receiving so I know I've got WCDMA coverage.
Does anyone else have this problem?
Between my wife and myself we have the \jasjar and MDA Pro and on different networks. No problems at all! But I have experienced this exact problem before when I had a Sony Ericsson V800 and called a relative on '3'. He could call me no probbs, we saw each other and everything. But when I called him, white noise for him but notification that he was receiving a video call.
Bottom line: It was never resolved so I took the phone back. Try a video call in a t-mobile shop, if it works try a video call in say vodafone or with someone else. This will tell you if you're phone is faulty or wether the '3' network is truly incompatible with some phones/network providers. Or PM me with your number and we'll try a quick 10 second test both ways.
Thanks for the offer - I might take u up on it later on...
I've got some gibbon from tech supp calling me today to try and sort it out (I think he mentioned something about not pressing the little "turn video calls" button)
If that doesn't fix it then I'll be swapping numbers with ya!
Cheers
I have also had problems going from O2 to THREE with video calls...
I managed to call an Orange VIdeo phone and we both got a picture, they can hear me, but I get no sound
Calling from THREE to Orange works fine all round.
I couldnt get O2 to THREE to work at all.
Is there a general problem with network incompatibility here?
Video calling from T Mobile UK to any network is fine, as long as both partys are setup for the service, and have 3G coverage. and both handsets are compatible
I have a colleague with a HTC P3600 GER, he complains that sometimes when he presses green button to answer a call or red button to end the call the device becomes unresponsive and he has to soft reset the device.
Is this a known problem?
Problem 3G -> GSM
Hi !
Same issue with my device but only in one condition:
I get an incoming call within a mixed 3G/GSM provider network (A1-Vodafone Austria) - i press the green button and my Trinity switches from 3G to G - the call seems to be answered but i cannot hear anything.
----->I wrote the following error description to HTC:
Massive problem answering phone calls in mixed GSM/UMTS network.
My P3600 works fine when the display shows 3G Network. Answering a call works fine by pressing the left phone button. The display closes the caller bubble and switches to the connected status and shows caller and time and so on. But every time the phone is connected to only GSM radio station - display shows "G" beside the antenna icon i cannot answer a single call. Pressing the left phone button results in showing the white bubble with caller information and nothing happens - the call doesnt start the calling party always hear the normal beep tone while waiting for pick up of the phone. In this circumstances i cannot hear anything from speaker and also cannot end the call by pressing the right phone button (hangup) - the software of the P3600 stops responding and the caller bubble is frozen at the display. When the call is discontinued by the caller the P3600 resets to normal activity waiting for a call and showing a missed call !! This happens at every GSM call - about 10 t! imes since yesterday !! It is very important for me that i can answer calls in both network connection modes because the austrian provider A1/Vodafone has mixed environment all over the country. The receipton of GSM while the problem comes up is always more than 2 or 3 bars on antenna display.
Hope that there is some possible solution for this problem.
ROM Software Version is:
1.16.407.2 (German)
Setting for network provider is:
Automatic
Band selection is:
Auto
Auto
Many thanks in advance !!
Gerhard from Austria
----->The answer from HTC was:
Hello
This seems to be a very strange issue that you are experiencing and something that we have not heard of before.
Does this occur every time that you receive a call in a non-3G area?
I would recommend that you perform a Hard Reset on the device. This will restore the device back to the factory software settings. This will also remove all settings, contact , calendar information as well as any files and SMS.
Once this has been performed I would ask you to test if this has resolved your issue. If this has then you should experience no more issues. If this does not solve your issue then I would recommend that you contact your local repair center, details below, to arrange a repair of your device.
+ 43 (0) 508115555
[email protected] <mailto:[email protected]>
Yours sincerely
Dan Mackie
[email protected]
http://www.htc.com
----->The Hardreset does not fix the problem :-(
Still waiting for a firmware upgrade ....
Gerhard
Since Uprade to Radio ROM 1.41.00.11 (http://forum.xda-developers.com/showthread.php?t=304006) i have no more problems with answering phone calls !!!
Hope the Radio ROM will be included in an official ROM Upgrade from HTC soon.
Gerhard
Hi, I have recently upgraded my XDA Exec tothe latest ROM version 1.30.107 WWE. I went into the extended ROM to install the cab relevant to video calling. The video calling button now appears but whenever I place or receive a video call on my phone I can see myself and the other party. But the other party cannot see me. It can't be drivers as the cam works for me to see myself. Anyone any ideas as to what it could be?
Regards
Ashley
Hi,
I've bougth unlocked Cingular 8525 and connected it to My local operator which support Video calls.
There is any option to enable video calls? (install tytn rom? or some extended rom)
Thanks ahead,
Omri
Same here
spv 3100 from orange, aku 2.3
r1.16.00.00 G32.53.7018.01h.
I search for info about missing video calls on wiki and forums, only what i found on wiki is:
Is the Extended ROM a must, or can I live without it also ?
You can live without it, but generally it fixes some things (video calling, skins, keyboard, operator settings, etc...).
Click to expand...
Click to collapse
...nothing more in hermes section, on forums also nothing clear response usualy same problem without no response
I downloaded different skin phones including original htc tytn and in HTeakC i turned on phone skin. When i turn on thc tytn skin video button is on the same place what speed dial and that double button is flickering.
More: when some one is trying make video call to me phone goes out from sleep and..... nothing. Other person hears only signal of waiting....
I also didn't had smart dial, but that thx to wiki wasn't problem.
But I didn't made any hard reset. If I would have to probably i will go directly to wm6, soon there will be xda-live3
If you have a Cingular 8525 you DO NOT have video calling. The 8525 doesn't have the front camera that is needed for video calling. Sorry
I know that i dont have front camera
But i ask if i can add video call's feature so i'll be able to see the other side or use the back camera.
Thanks,
omri
Josiv said:
Same here
spv 3100 from orange, aku 2.3
r1.16.00.00 G32.53.7018.01h.
I search for info about missing video calls on wiki and forums, only what i found on wiki is:
...nothing more in hermes section, on forums also nothing clear response usualy same problem without no response
I downloaded different skin phones including original htc tytn and in HTeakC i turned on phone skin. When i turn on thc tytn skin video button is on the same place what speed dial and that double button is flickering.
More: when some one is trying make video call to me phone goes out from sleep and..... nothing. Other person hears only signal of waiting....
I also didn't had smart dial, but that thx to wiki wasn't problem.
But I didn't made any hard reset. If I would have to probably i will go directly to wm6, soon there will be xda-live3
Click to expand...
Click to collapse
Some of us are having this exact same problem after upgrading to the LVSW WM6 roms. Don't know why as some others with exactly the same setup are saying that they work fine!
I wonder if this could be network operator linked instead?
edit: sorry, im using a TyTN and on T-Mobile UK
jcb_home said:
If you have a Cingular 8525 you DO NOT have video calling. The 8525 doesn't have the front camera that is needed for video calling. Sorry
Click to expand...
Click to collapse
I have an 8525 with front camera link below gives full tutorial with pics on how to install. I want to use the front camera for picture taking actually and not too conerned with video confrencing. Any know what I need to do next.
http://www.howardforums.com/showthread.php?t=1152710&page=1&pp=15
I saw the manual for how to make three way calling.
I understood how to make 3-way calling. when i am in a call either "recieve a new call and press talk again" or "make a new call and press talk again"
My problems are:
1. I am not able to end/release a single call after making conference.
2. I am not able to end/release the new call and continue on the old call unless the new call eneded by the other party.
3. I am not able to swap the calls when i am not in conference call.
I was able to these in my previous winodws mobile phones t-mobile SDA and Dash.
Is ther any additional app to make this possible or Is there a way of operating the mogul to achieve these.
Please help.
no replies.
is the problem stupid
or
no one knows a solution
i am really not able to operate the above.
i really appreciate your help.
I have not tried this yet on my mogul but to switch between calls all you need to do is hit the call button. As far as ending the call, I always wait for the person to hang up. Sorry I could not help.