Call me old fashioned, but I prefer at times to use a cheap 2.5mm headset with my phone. Don't have to worry about charging it and don't have to worry about losing it either.
Well, I got an HTC adapter from a friend with a Mogul that connects to the Tilt (it fits) and splits into a 2.5mm and mini-usb jack. All was fine until recently when people started telling me that they were having trouble hearing me, and one who told me to take them off speaker. I just did a test by calling my voicemail and putting the phone in a closed drawer. The voicemail was empty, so obviously, the microphone on the headset wasn't being used - it was using the mic on the phone instead. Is this the way it is supposed to work or do I have either a defective Tilt or a defective adapter?
Thanks,
Koj
You tried a different headset? I have had real problems with wired headsets having crappy microphones.
Yes - I tried three headsets already. The problem is that the mic does not pick up at all. Test it out - I blow on the headset's mic and the other person hears nothing. I blow on the phone's mic, and they hear it.
Strange
Related
Hi,
I have connected my KJam to my car stereo via a cable from the 2.5mm jack to the aux port of my car stereo. Tom Tom voice and phone calls are routed through my car stereo. Sometimes, the microphone will not work when I take a call. I can hear the caller perfectly but they can't hear me. Other times, the phone functionality works perfectly and we can both hear each other great.
If anyone can suggest any ideas, I would be very grateful.
Thanks
if your using a jack to connect it to your car, then its will prob. stop the mic working as its routing the audio to you car in the same way the headset with mic that you got with the k-jam does. I had this problem on mine, but due to the fact that i use a bluetooth neadset in the car fixed that little problem 8)
That's the end of my k-jam desires then.
I use my MDA compact in the same way you describe, for TomTom, Hands free calling and to play my music through.... and my microphone works fine with the headphone jack in.
I guess one thing to check would be the number of rings on your 2.5mm jack. If you have 3 then theres a possibility the k-jam thinks you have a mic on the end of the wire. If you have 2 rings (normal stereo headphones) then there must be another issue somewhere.
thanks for your replies. My concern was around the fact that sometimes the microphone works and sometimes not. I wonder if there is a workaround or a specific type of cable that I need to ensure that only the audio is routed and not the mic as well.
Thanks for all your help.l
never tried this myself, so i can only assume it would work. you could hack a cheap wired headset up, removing the earpieces but leaving the microphone. then add a stereo 3.5 plug so you can hook it up to your car stereo.
SpeedN
I have that very problem also, it's gotten that annoying that i've stopped using it through my stereo. you are able to get around it by popping the cable out of the kjam, then putting it back in.
pain in the ass though none the less.
What is the phone is set to Speakerphone ?
Even though Speakerphone is currently not working...
Hey all,
Just wondering if anyone has had any success in fixing this problem? I am having the same issue. I have a 2 ring 2.5-3.5mm adapter connected (so it should only be routing the audio, not the mic) and sometimes the caller can hear me, sometimes not. At one stage I found by unplugging the cable, setting to speakerphone, then unsetting speakerphone and plugging the cable back in would get it to work, but not anymore...
Any ideas?!?! I love my XDAII mini but this is driving me up the wall!
Cheers,
jlitjens
I recently have gone through two different Body Glove Sport Stereo headphones with some issues. I can't decide if I have another faulty headset or if the phone audio connector is the issue. The body glove headset is similar to the headset that comes with the 8125, but it looked more comfortable.
The problem I am having is this, the headphones only play in the right side. Messing with the plug on the headset results in some quick burst of audio on the left side and pulling it out a tad gives me some faint left audio and the right side audio goes out completely. It seems the plug and jack don't quite jive... anyone else experience this? It comes with an adapter for the "bigger jack" and upon trying one of my girls iPods, they work fine with the adapter in the mix.
My application is this... I listen to MP3's while riding my motorcycle and the earphones that came with the phone hurt my ears after a while. Plus they don't have the greatest audio quality. Looking for a comfy replacement, but the above issue has me scratcing my head.
Here is a link to the headphones: here
i think...
i think you have the wrong adapter. i tried using the slvrs adapter with my 8125 and it did not work same prob as you. i went to radioshack and got one from there and it did. im most absolutely sure is the inner wiring. what happens is that there's also a connection for a microphone on the 8125 so some adapters dont work.
http://www.pocketpctechs.com/main~unit~Cingular_8125-559~area~accessories~item~PPCPADPT21.htm
ps my friend got a mono one at radio shack and it worked for him both sides. hes not a audiophile but you get the idea, it has to be the connection of your plug.
The headphones in addition to be being stereo, have the microphone too, I think the paragraph in the page you linked clears up a few questions for me:
Most manufacturers create their devices allowing audio compatibility with only their specific brand headset or headphones. We have designed and engineered several different types of audio adapters to accommodate a variety of devices. Our unique audio adapters give you the freedom to use any standard 2.5/3.5 mm. 3 conductor headset and/or your favorite set of headphones.
Click to expand...
Click to collapse
It would seem although the Body Glove headset uses the 2.5mm jack, the internals of the 8125 are off enough that a select few aftermarket stereo headsets with mics will work with the phone. Interesting.
Upon further examination of the jack, it is different than the one that came with the phone. In spite of the BodyGlove being a stereo headet with a mic... just like the one that comes with the phone, the connector is different enough to not with aftermarket stuff I guess. Those dirty rascals!!!
The connector on the left is the one that comes with the 8125, the one on the right is the BodyGlove.
Searched and found this old thread. I went to connect my 8125 Wizard to my cars 3.5 jack using a standard adapter and it only came left channel.
Is there a more cost effective proprietary four-conductor jack to a 3.5 mm converter than posted above at PPC Techs? I was hoping to spend a few dollars.
I'm actually using my old Ngages audio cable to get Stereo sound out of my car stereo. It works but sometimes I can't use the mic on the cell phone to talk.
When it works it's really cool, but otherwise I gotta unplug the cable and use it like a regular phone during phone calls.
is there any way to enable build-in microphone while using 2.5mm audio jack connected to car's stereo?any registry edit?Thanks in advance!
I think that the insertion of a jack into the socket operates a hardware switch so I don't think there can be any software tweaks. It is the same as plugging headphones in to a radio etc. the insertion of the jack breaks the connection to the speakers and diverts the output to the headphones.
I got a 2.5mm 4pole male to 3.5mm 3pole female adapter with built in mic and volume control off ebay for less than £5. A cheap 3.5mm patch lead to car stereo later and it works perfectly, other than a slight alternator induced whine is audiable when charging. This is more likely to be from my cheap car charger as it goes when not charging. I like the way MP3s etc get muted when a call comes in. TomTom, Mortplayer and phone calls all at the same time, I love my Wizard.
Guess u didn’t try it. I have my wizard attached with the car stereo and when I get a call i can receive it and talk, the mic gets activated auto. Works perfect for me. Give it a try should work for u.
didn't try what?how does your mic work?
Well I use a 2.5 to 3.5 mm converter which in connected via RC wire to the car stereo linein, when I get a call I just receive it and I can talk. The music stops I can hear the person call and can talk back, the microphone works perfect.
with mine 2.5->3.5 mm jack(done it myself, the 2.5mm jack has 3 poles, not 4) can only hear but the other person doesn,t hear me
my jack has 3 poles, bougth it from ebay some time back, works perfect for me
Hi chaps,
Do you have any suggestion for a wired compact headset to take phone calls?
I got a bt but its not always on and when I get a call, I dont want everybody around me to hear the conversation but when i pop in a 3.5mm stereo headphone, the microphone stops working
I cant find a combo in-ear headphone microphone thingi with one 3.5mm jack or a mini usb headset... so any suggestions?
What about the original one in the package?
You can leave your device in the pocket and accept or quit phonecalls.
You can set the volume of the incoming call to lowest with the slider left to the navi-stick, then other people do not hear your calls if you are 2-3 meters away.
I'd like to know a wired headset which shows the caller-ID in the microphone case, like the old sony walkman with the display on the wire, showing actual song and volume. The 3.5 jack will not support this, i know.
yeah you can just leave any 3.5mm headphones pluggged in, as long as they are plugged in before the phone comes in you can use the inbuit microphone.
The device still rings, so you just put the buds in your ears and answer.
This is what I do with my senseinhers.
I'd like a decent replacement corded set, don't like the sound quality from BT ones I've tried.
Had a USB one from gpsforless that you can plug your own headphones in just past the mic, but it wasn't well built and lasted about 3 weeks.
I bought this one for use in the car while plugged into my AUX in on the car stereo.
http://cgi.ebay.com/FOR-CINGULAR-85...ryZ15040QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
It works great with the Athena, there are a bunch of different types on ebay, just search for "Tytn Adapter" and you will find a bunch.
Pretty much any HTC Extended USB based adapter will work with the Athena.
Good Luck
G
thanks for the advice; i bought it second hand and didnt get the original one. does that one have a mike?
i use the original wired headset u1000,
but i get problem like yours,
i i can't send my voice through microphone headset,
my friend can't hear my voice wwhen made phone call,
that problem came after reflashed from original wm5 to wm6,
i tried 3 different wm6 but still in microphone headset problem,
have any ide ? thanks
imamlab said:
i use the original wired headset u1000,
but i get problem like yours,
i i can't send my voice through microphone headset,
my friend can't hear my voice wwhen made phone call,
that problem came after reflashed from original wm5 to wm6,
i tried 3 different wm6 but still in microphone headset problem,
have any ide ? thanks
Click to expand...
Click to collapse
I don't have such a problem with the original wired headset. The sound is excellent in both WM5 and WM6.
My wired headphones died pretty quickly, so now I use a pair of sennseisher buds, the microphone on the athena works when using standard earbuds, so although not hands free, it is at least a bit more private.
I like this from PPC Techs.
http://www.pocketpctechs.com/main.asp?unit=HTC_Advantage-895&area=accessories&item=PPCPADPT17
It gives you both 2.5mm and 3.5mm output so you can have your headphones in one plug and the headset in the other.
They have another adapter that goes from the USB for the same purpose but I don't have that one.
fards said:
My wired headphones died pretty quickly, so now I use a pair of sennseisher buds, the microphone on the athena works when using standard earbuds, so although not hands free, it is at least a bit more private.
Click to expand...
Click to collapse
ouh.. interesting to ur post
yeah maybe that is the KEY,
i'am forget,
i have changed my original earbud with Senheiser mx500, same as you, died quickly, then again changed to original N6233 earbud, great sound for music
but maybe causing malfunction the microphone ?
thanks a lots, i will try to change my earbud,
One of the features I miss of my Hero that my Nokia N95-8GB had was the ability to plug in a standard pair of headphones (or 3.5mm audio out cable) and use the built in microphone to make hands free calls.
I use the phone a lot in my car whilst driving to and from work to listen to music and would love for it to recognise the standard cable (which it does - indicated by a pair of headphones rather than the headphones/mic icon used to indicate the presence of the hands-free headphones) and be able to automatically answer inbound calls using the internal microphone.
Is there an app for this kind of thing - I'm guessing it is something that is/can be controlled by software?
have you tried it actually? because i use my ipod headphones quite often and it works as expected, sound from headphones and i hold phone closely to my mouth as its using internal mic.
Really not sure what you are looking for. If you plug the standard HTC headphones in using the jack on the top then you can use of the built in mike they have to answer calls.
Or have I missed something?
I've also done exactly what you're asking with my car. I've had my phone in a car holder w/ an audio cable from the Hero's headphone jack to my car's line in jack. I was able to answer calls just fine, and the person on the other end could hear me. (And it was just a standard stereo audio cable, my car doesn't have any sort of built in mic)
bjg222 said:
I've also done exactly what you're asking with my car. I've had my phone in a car holder w/ an audio cable from the Hero's headphone jack to my car's line in jack. I was able to answer calls just fine, and the person on the other end could hear me. (And it was just a standard stereo audio cable, my car doesn't have any sort of built in mic)
Click to expand...
Click to collapse
im doing the same thing but people on the other end are complaining about an echo of thir voice. I figure its coming from thier voice being picked up by the internal mic. Anybody have any ideas? how can i cut the internal mic while theyare talking. would a cheap wired headset work using its external mic? i could cut the headphones off and splice it into the line in.
I have had my G2 since late September and quickly found out by accident that it does use the internal mic when a headphone is plugged in.
Mine is a simple adaptor from the 3.5 mm into the RCA in my car. If I have the volume up too high, it echoes. If I have the volume down low, I can have a perfect handsfree conversation.
With the headphones I have had problems. In the car, I have the phone laying down and the mic side up. If I am holding the phone in my hand, I have no problems. Shirt pocket, ok. Pants pocket, no way.