I managed to do this one time.. and like all great things it was purely by accident. well after reformating my laptop i was unable to reproduce the results.. I was able to get bluetooth audio streaming over my laptops speakers just as it would if it was a bluetooth headset. does anyone know how to reproduce this? i have had no success and ive been trying for a week. One thing i noticed is that i was never able to connect to windows mobile device center (activesync) after that happend.
Good news! Ive solved my own problem with much trial and error I manage to reproduce the results by removing the bluetooth partnership with my laptop, inserting the disk that came with the Mogul/Titan and reinstalling everything (user manuel, windows mobile device center) this must have reinstalled all drivers and some new ones, bc once it was completed i was able to pair the mogul and laptop again with activesync, the headset, and wireless stereo.
I also upgraded the drivers for my bluetooth chip in my laptop, but i believe that had no effect since i was unable to use the stereo bluetooth until i did the above ^
Related
Hi,
Creating a bluetooth partnership between my computer and htc Tytn, I saw that I have the possibility "set as wireless stereo" on this partnership...
I guess the idea is to play sounds on my computer speakers, which would be nice, but it doesn't seem to work (nothing happens)...
I had some problem using active sync via bluetooth so maybe it's just my bluetooth drivers.
Has anyone tried that before? Does it work?
Thanks
Raph
I too have tried this but it did not work. I set it up on a computer at work so that I can play music through the PC speakers and no joy. It seams to connect and I even get the stereo BT icon on the PPC, but no audio is heard. No sound comes out of the device or the PC. So it seams that the device is sending the sound, but the PC is not playing it.
I will add that this was on vista but I have a feeling that it does not work properly on XP either, do to the fact that its a widcomm stack.
Later, Lew
Hi,
I've installed Vista lately and finally managed to have Activesync and dialup working through Bluetooth.
I see however that I have "Telephony Audio Gatewat" and "Stereo Audio Player" options in Vista's bluetooth option's tab and it is listed under my Hermes device.
When I click and try to activate those serviers it shows 'connected' for less than a second and then immediately goes back to 'disconnected' state.
How can I use the Audio telephony through Bluetooth to my Vista laptop? Will be nice to have phone calls (especially conf. calls) through the laptop.
Also, how can I use the "Stereo Audio Player" option?
Thanks!
Gil.
I am also encountering this issue. I own the HTC Rapheal and have synced my phone and laptop, succsessfully transfering files between the two, however the audio options "Stereo Audio Player" and "Telephony Audio Gateway" do not connect. When I press connect the dialog displays "connecting" briefly then seems to time out, as it then reads "disconnected". Any help would be appriciated. thanks in advance!
Same Issue
I am having the same problem while connecting my HTC Touch Diamond. The audio is not working.
Yesterday, I had it working and I was able to stream the Sprint Radio to my laptop multiple times during the day. But all day yesterday, I couldn't get the headset audio to come to my laptop.
Today, the reverse has happend. I can get the phone audio from calls to come to my laptop but I can't get the music to work.
When I click on the "Stereo Audio Player" service it briefly shows "connecting" and switches back to "disconnected"
I've tried restarting the phone, turning off/on bluetooth on both devices. Adding/Removing services....
... and I still can't get it to work.
anyone know how to fix this?
Can it be done?
I would like to be able to use my laptop or in fact ANY computer with bluetooth as a headset for the TyTN. Reason?
Well, while I work with my laptop I use a headset, when the phone rings I have to remove the PC headset and put on the phone headset, or pick the phone up, Ideally I would like to be able to use the one PC headset to do both.
As a secondary use a friend of mine has a Universal and a car computer, the car computer (a Dell P4 system with touchscreen etc) is connected to his car audio system, and he would also like to be able to control the phone etc from the Dell.
I personally am not really looking for PC based control of the phone, just the ability to use the one headset (wired) for both purposes via the bluetooth on the laptop.
Copious amounts of googling seem to return no information on this, but I am hoping that one or more of you on here have managed to achieve what I am trying to do.
Thanks
i remember trying that quite a while ago with my previous phone, and I found that although it cannot be done with the standard Microsoft Bluetooth stack in Windows, the WIDCOMM drivers for Windows have built in support for that feature. Although it does lack noise cancellation (im sure there is some software that will do it for you) and it does get a lot of feedback if you try and use it as a booming speakerphone. Hope this helps
Thanks, now all I have to do is find a working widcomm stack for at least one of the bluetooth adapters I have heh,
btw - advice, do NOT install bluesoleil in vista, I tried and it even corrupted the BSOD heh, that made for an interesting recovery, safe mode, remove driver AND driver files from PC.
i want to know this also. i've searched for about three days and still no luck. i have an azio bluetooth dongle and i upgraded to the latest toshiba stack that supported handsfree/headset profile. i still cant get it to work. i figure if it was working when i pair my phone to the pc under the list of services it would say headset under activesync.
if anybody knows how to get this done please post it. i will create a tutorial for it because i know many people want to do this.
hi friends, i've a question: is it possible ear on ppc speaker on air, using bt, the audio of a film (for example) from a pc?
I tryed but windows doesn't want see my TP2 as speacker... any ideas?!
thanks a lot to all!
see you
Try downloading drivers. I have not tried with my TP2 but my old Htc Wizard did.
My Touch Pro 2 streams audio plus other services. I included a screen shot of my Bluetooth services with Rhodium
Misread that doing inverse
BT device for PC is possible issue
The problem may be with the BT device connected to your PC. Some BT drivers provided with devices are limited and/or don't play well with the windows BT drivers. What services does your PC BT device provide? Can you create a pairing for an Audio Gateway between the PPC and PC?
Hi there,
since I updated my Win7 to Win8 pro, i am not able to stream audio from my N7 to my laptop via BT. Pairing and filetransfer works fine via BT but i am not able to stream sound to my Laptop via BT. Under Win7 it worked very well. I tried different broadcom bt drivers but i didnt see my N7 as a Playback device.
I already searched the internet for solutions but did not find anything. Seems that there is a problem with A2DP profile in Win8. Do you guys have a hint for me?
Cheers,
gdm