Hello everyone!!
I've just bought a bluetooth headset NOKIA BH-900... It works great with a phone but I would like to use it as a headphones (in such a manner it works with nokia n80 - I have checked) but I can't set it. First of all I've connected hedset with my SPV... all functions such a voice commands, connections and redialing works but if I play music it plays through the phone loudspeaker... I've noticed that if run voice command while playing music it turns off the loudspeaker and then I can hear a piece of track in BT device...
How can I set it to play the sounds all the time through the BT? I would like to use it with a Skype on my SPV...
By the way. Has anyone manual to the BH-900 headset in englisg/polish (I have only in skandinavian languages )
Thanks for your help,
BEST OF LUCK
Skomiałek
Related
I am soon to buy the Magician in one of it's many forms. However noe thing i have been woundering is how am i am going to achieve the in-car setup i desire. Basically I need both a carkit (conversation through car stereo speakers etc) and i also want to run GPS navigation on the Magician. First of all is this possible? What happens if i am using the GPS and i recieve a call? Also what hardware are people using to achieve this as i assume i can't use both a bluetooth carkit and a bluetooth GPS reciever?! any hlp is greatly appreciated.
Thanks,
Tom
Hi Tom,
I've got an iMate Jam & recently installed a Parrot BTluetooth CK3300 GPS Car Kit into my 1999 RAV4. The installation was pretty straight forward for cars with ISO connection, simply put in the mic, GPS ant & control display, plug into the car harness & HiFi & off you go. The GPS part of the kit is simply & effective, I use Tom Tom Navigator 5 & it's pretty faultless, obtaining a fix in seconds. Here's the bad part, the call quality through the kit using the Jam is AWFUL. Making and receiving calls is accompanied by a loud, high pitched warbling sound which eventually subsides, but is replaced by so much interference that the call is unworkable. I know it's not the kit because my wife's SE T68i works flawlessly. Everything else about the setup works perfectly (pairing muting, upgrading via BT etc etc). This a MAJOR problem which I have sent on to Parrot & am waiting for a reply. I understand they are pretty good at customer enquiries and expect them to come back to me pretty soon. I'll post again when I hear something. Despite all the bad press the Jam gets I think it's the best one I've owned so far (I'm on my 5th) and with the right software is excellent, but the choice of car kit is essential, until these problems are ironed out I wouldn't recommend using the PDA with a BT carkit.
Apart from the poor audio, how does it work when you are being navigated by TomTom and you receive a call? Does TomTom stop talking to you? Does the display show who's calling and then go back to tomtom display etc?
Hi there,
I have a MDA compact with now the QTEK 1.12 ROM, I have a bluetooth GPS Fortuna Clip-on and a Mr Handsfree Genius Bluetooth Carkit and I love it.
As soon as I start my car, there is a bluetooth connection to the carkit and the sound quality is excellent. You can make a call without getting the MDA out of your pocket, just push the button. The only issue is voice dialing, but that is a common problem for the MDA.
Also it makes a bluetooth connection to the GPS and Tomtom works fine. The only minus is that Tomtom doesn't use the carkit speaker, but, since the speaker of the MDA is loud enough, that is no issue. There is no supply with this bluetooth carkit, so I bought a 12 --> 5 Volt converter for the MDA.
I really love this combination. The best thing, that happened to me.
Andre
Hi there,
I have a MDA compact with now the QTEK 1.12 ROM, I have a bluetooth GPS Fortuna Clip-on and a Mr Handsfree Genius Bluetooth Carkit and I love it.
As soon as I start my car, there is a bluetooth connection to the carkit and the sound quality is excellent. You can make a call without getting the MDA out of your pocket, just push the button. The only issue is voice dialing, but that is a common problem for the MDA.
Also it makes a bluetooth connection to the GPS and Tomtom works fine. The only minus is that Tomtom doesn't use the carkit speaker, but, since the speaker of the MDA is loud enough, that is no issue. There is no supply with this bluetooth carkit, so I bought a 12 --> 5 Volt converter for the MDA.
I really love this combination. The best thing, that happened to me.
Andre
so it is possible then to have two bluetooth connections running at the same time? ie. i can use a bluetooth GPS reciever such as the one that is supplied with tom tom and also use any bluetooth carkit at the same time? and this will not cause any problems even if i am making a call and have the GPS running?! If so then i will probably just buy the Tom Tom 5 bluetooth kit and get something like a parrot CK3000? would this setup work?
thanks for everyones help,
Tom
It should work. Mine does. See above. Bluetooth GPS uses a serial profile, bluetooth headset uses a headset profile. No problem to use them both at the same time.
Andre
I used my Jam as phone, mp3 player and GPS all at the same time.
1. MP3 thru my car's aux input
2. GPS thru aux input:
hardware: Tomtom BT receiver
Software: Routis 2, TomTom USA 2004 (can open both if U use GPSGate)
3. Phone thru BT headset or aux input
To answer yr question:
Since I can use both BT GPS and BT headset together. I don't think it's a problem for both BT carkit and BT GPS to works.
Phone call always get highest prioity, all other apps (GPS software, mp3 player) will be mute until U finished yr call.
Phone call is not a problem (see above) but dialing is a big trouble since no voice calling built-in. Third partner software like intellidialer and voice commander (from MS or Cyberon) helps a bit
Ive also got my jam working fine incar. I use a socket bluetooth gps unit http://www.expansys.com/product.asp?code=119717 with tomtom 5 then I have a SE HBH-600 Akono Bluetooth Headset for calls both work together! When I have a incoming call it mutes tomtom and displays the normal caller id app on top, answering the call (via the green hardware button) results in my jam going to the phone app totally and leaving tomtom minimized in the background. As soon as the call ends tomtom jumps back to the foreground, it all works very well in my opinion. Ive also assigned the camera button to switch me back to the today screen so I can launch any app (with tomtom still running in the background) via a icon.
Dear All,
I'm pretty new to this forum and to the Wizard as well.
I'm using Navigon Navigator 5.2 on my T-Mobile Vario which works quite well. I do have one issue, well more an incovenience, while using the headset.
When Navigon is active and I accept a call with my bluetooth headset all system sounds, including Paula2 the nice navi lady, is muted. The phone call itself is diverted to the headset.
That make sense as I don't want to have Paula2 on my headset but I would like to have her on the speaker.
Is there any way to have phone calls served by the headset and system sounds, including program sounds, played on the speaker?
Any help is appreciated.
Cheers,
Thorsten
I have upgraded my ROM to the latest official one, but still I can't make my ITech's PowBOX bluetooth HeadSet to work as Wireless Stereo. It only works as Hands Free. I tried my HeadSet on Nokia and did works as headset flawlessly. I also cannot activate my voice speed dial via bluetooth on my Atom. The bluetooth button just activate redialling last called number. Is there anything I need to configure to make this work? Please help. Thank you.
Anyone, please?
I use the iTech S35 and STEREO works like a charm with the Atom. I get stereo mp3 and movies. The handsfree works too although the voice dial doesn't cos the long press to activate the voice dial uses the button to turn the iTech on and off so u will end up turning the iTech off.
not heard of the iTech powBOX so dun know how it compares but I assume it should work too.
i think it used to work in older ROM version... could it be the new ROM?
I use Samsung Bluetooth SBH100 as a stereo headset with Atom (latest ROM) - got no problems. Headset's remote control buttons for audio player works too. Short press of Phone button make a redial. 4 sec press should activate voice dail (on 'supported devices'), but make nothing (common problem).
can the SBH100 play radio?
touraco said:
can the SBH100 play radio?
Click to expand...
Click to collapse
Don't think so as Atom requires the ear piece to be plugin as antenna...
I am using Bluetake Iphono BT stereo headset on Atom. It can listen to the music and act as handsfree for calls seperately but couldn't do both at the same time, the headset will switch off whenever there is incoming call while playing music, i guess there's some problem on switching btw.
Anyone got the same problem??
can't listen to music but can make calls
Hi,
I'm kind of new here, as I just bought a used atom from that e*** auction site. it works great, except i can't get my bluetooth headset to work as a headphone while listening to podcast, mp3's, etc. using my BT headset to make calls works fine. I have both a Jabra BT130 and BT350 and both have this problem. is it the headset? if so, is there a list somewhere that lists what BT headset is compatible? i really need it to work as I cannot stand using wired headsets since by the time i untangle those wires, I'm out of time already...
thanks a lot!
It's the New Rom..(i think)
Knightro said:
I have upgraded my ROM to the latest official one, but still I can't make my ITech's PowBOX bluetooth HeadSet to work as Wireless Stereo. It only works as Hands Free. I tried my HeadSet on Nokia and did works as headset flawlessly. I also cannot activate my voice speed dial via bluetooth on my Atom. The bluetooth button just activate redialling last called number. Is there anything I need to configure to make this work? Please help. Thank you.
Click to expand...
Click to collapse
the problem comes with the new rom i think.. i had a bluetooth headset that worked perfectly before i uograded to the new Roms released by O2 itself.. i emailed them about the problem but they insist that nothing is wrong with the ROMs they made...
With my old phone (ipaq 6315) I used it and my bluetooth headset to play MP3's. Now with the MDA, when I click play, the headset does not activate...it does remain active for voice calls though. If i press a buton to activate it, it does work for a few seconds, then a voice dialing box opens and says I have nothing there and the headset stops though the song continues playing through the MDA's speakers. How can i bypass this?
Thanks,
Mike
mcrunner1 said:
With my old phone (ipaq 6315) I used it and my bluetooth headset to play MP3's. Now with the MDA, when I click play, the headset does not activate...it does remain active for voice calls though. If i press a buton to activate it, it does work for a few seconds, then a voice dialing box opens and says I have nothing there and the headset stops though the song continues playing through the MDA's speakers. How can i bypass this?
Thanks,
Mike
Click to expand...
Click to collapse
Are you using a standard one-ear only headset (recommended for voice calls only) or a Hi-Fi stereo BT headphone like the HT820?
I'm using a standard one ear only headset (scala 700). My previous headset was also a one ear only (Motorola HS850) it worked with the ipaq 6315, but I never tried it with the MDA as I sold it along with the ipaq.
Thanks,
Mike
<Are you using a standard one-ear only headset (recommended for voice calls only) or a Hi-Fi stereo BT headphone like the HT820?
__________________
MS MVP - Windows Mobile Devices, 2006. Check out my PPC articles/tips here.>
u need a program called BT audio. u can get it here. freewareppc.com then it`ll work fine
BT Audio
Thanks John. I tried your link and found the program, but was redirected to a site to pay for the program. I did a little more checking and found another program called Blue Music and to register it ws only 6 euros. Yes, they wanted euros, came to 7.73, so wasn't too bad and it works great. Thanks for your help.
Mike
Hello guys,
I own a Tytn 200 and I have wm6.0 on it (default from HTC) everything works like a charm. I listen to music through my BT headset Peltor WS Alert A2DP Headset and phone calls also work very well (even from 60 meters away)
I've been reading here and searching on google but haven't found a "working" solution to be able to use skype, fringer, etc through the BT headset. I can hear but my headset mic is dead. At least people on the other end can not hear me.
any help will be appreciated.