Database Users

How to enter Boot Loader screen?

can anyone teach me how i can enter my boot loader screen for Dopod 838Pro (HTC TyTN )?
THANK YOU

You might try the Wiki
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
It has a lot of Knowledge..
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes

thx dude....
great help

On my 8525 I hold down the ok button on the left and the power button simultaneously on the right, while sticking your stylus into the round hole on the bottom of the phone for a second or two. you have a lot of reading in front of you...

This is cool
simple,isnt it?

HELP!!!
mbn said:
On my 8525 I hold down the ok button on the left and the power button simultaneously on the right, while sticking your stylus into the round hole on the bottom of the phone for a second or two. you have a lot of reading in front of you...
Click to expand...
Click to collapse
hi there this does nto work for me any ideas?
and yes i have tried the camera button to

05zacwhi said:
hi there this does nto work for me any ideas?
and yes i have tried the camera button to
Click to expand...
Click to collapse
press down both the right hand side POWER button and the left hand side OK button, then using the stylus the RESET button on the bottom.

Help! device locked out!

Hey guys
I recently installed phone pad international on my phone. It worked fine at first then for some reason the T9 wouldn't spell english words correctly. I decided to remove Phone pad from the program menu
When I did it asked if I would like to reset, which I said yes. when the phone tried to re boot it got stuck on a white screen which I can't get passed.
I have tried to do a hard reset in each of the following ways:
Hold power & reset together - but this doesn't work
Press Power & camera together which just gets me to the boot loader but with no prompts to take me further.
I would be most grateful if anyone could suggest a solution
(the only other thing that springs to mind is perhaps loading a new ROM but i'm not sure how to do that either)
Thanks guys!

This is hard reset:
hold both softkey buttons, and use the stylus to press the 'Reset' button on the bottom.
Bye

hey that was quick, thanks!
which buttons are the soft keys?

phil_fenton said:
hey that was quick, thanks!
which buttons are the soft keys?
Click to expand...
Click to collapse
The ones above the answer (green) and end (red).

hardreset without a stylus

im trying to hardreset my p4350, but nothing is working.
i tried with an earring and i can't really feel the reset button in the hole on the bottom.... i can't get it to hardreset.. i hold down the two softbuttons which i finally figured out are the lines not the red and green and not ok/windows... anyway... i hold htem down, press the reset hole, then nothing.
do you do this with windows trying (and failing) to boot, or with the power off? i've tried it both ways with no sucess =(

so you also cannot softreset????
try a hardreset by "start - settings - delete storage (or so)" i guess.
but i cannot belive that you even cannot softreset. and when you can softreset - you should be able to hardreset
layla said:
im trying to hardreset my p4350, but nothing is working.
i tried with an earring and i can't really feel the reset button in the hole on the bottom.... i can't get it to hardreset.. i hold down the two softbuttons which i finally figured out are the lines not the red and green and not ok/windows... anyway... i hold htem down, press the reset hole, then nothing.
do you do this with windows trying (and failing) to boot, or with the power off? i've tried it both ways with no sucess =(
Click to expand...
Click to collapse

soft reset doesn't work either.. that button seems ot have no effect...
and i can't boot WM so i can't do ANYTHING
or i wouldn't be trying to hardreset =(

how far in are you supposed to press? for how long? how long to press soft buttons? pleeease help! i hate windows mobile for not having a safe mode or anything!!!

layla said:
how far in are you supposed to press? for how long? how long to press soft buttons? pleeease help! i hate windows mobile for not having a safe mode or anything!!!
Click to expand...
Click to collapse
holdin the softkeys for 5 sec and once pressing the reset button should do the trick.
but when nothing happens.....

simply throw off the battery for 10 secs, then put it again, press power button shortly and press softkeys and hold it. it will help you without reset!

layla said:
im trying to hardreset my p4350, but nothing is working.
i tried with an earring and i can't really feel the reset button in the hole on the bottom.... i can't get it to hardreset.. i hold down the two softbuttons which i finally figured out are the lines not the red and green and not ok/windows... anyway... i hold htem down, press the reset hole, then nothing.
do you do this with windows trying (and failing) to boot, or with the power off? i've tried it both ways with no sucess =(
Click to expand...
Click to collapse
The hole in the "bottom" ie. next to the charging / sync port is your microphone - please do NOT go poking around in there, or you will wind up with a non-working phone.
The reset button on a Wing is on the left side, directly below the volume slider. A paper clip or ball point pen should work, if you don't have a stylus.
Good luck!
qwkynuf

I erally, really hope that this is not the soulution.....
jsut kidding
qwkynuf said:
The hole in the "bottom" ie. next to the charging / sync port is your microphone - please do NOT go poking around in there, or you will wind up with a non-working phone.
The reset button on a Wing is on the left side, directly below the volume slider. A paper clip or ball point pen should work, if you don't have a stylus.
Good luck!
qwkynuf
Click to expand...
Click to collapse

then i may well have a non-working phone now!!! =( i went poking around in there a LOT with an earring and a paperclip X_X

ValdikSS said:
simply throw off the battery for 10 secs, then put it again, press power button shortly and press softkeys and hold it. it will help you without reset!
Click to expand...
Click to collapse
what will this do, exactly??

this will damage ur mic...nothing serious.....

layla said:
then i may well have a non-working phone now!!! =( i went poking around in there a LOT with an earring and a paperclip X_X
Click to expand...
Click to collapse
Were you able to get it to reset by using the correct button? If so, does your microphone still work - have you tried placing a call to see if the other person can hear you?
Good luck!
qwkynuf

HTC screen not responding

my hd is not responding to touch or anything else when i reboot doesnt seem to load up HTC home?

bandit250 said:
my hd is not responding to touch or anything else when i reboot doesnt seem to load up HTC home?
Click to expand...
Click to collapse
Have you tried a hard reset?
Make sure you have a backup of contacts etc
Then turn off phone (remove battery if you have to)
Hold the volume up and down button in (Make sure your pressing both up and down)
Then press power button it will show a message on screen to reset blah blah
release the volume buttons
push the volume up
then volume up again
see if that works

bandit250 said:
my hd is not responding to touch or anything else when i reboot doesnt seem to load up HTC home?
Click to expand...
Click to collapse
Have you recently changed anything on your device? i.e. new rom, USPL, HSPL, new app/software etc

Strang
Just now my freind have the same problem
I tried hard reset but it did not work.
He bought his device from England
Is some one experiance this probleme before?

Screen stopped working, black screen.
I have the same problem

touchscreen not responding
me too
My HD touchscreen not responding
please help

Tell us before what you did to get the touchscreen not responsive... When you touch the screen, does the backlight get higher or not ?

I installed
HSPLWrapper_Blackstone_156OliNex
and
Miri_WM65_23004_Premium_Manila_2.5_REV2
one week ago, everything work ok, but yesterday just no touch response. I tried to hard reset it but when the hard reset start I can't tap the screen to continue the set up. only the volume and power buttons working. Any Advice, please..
reinstall shiped rom, and HSPL 1.14, not help
sorry for my english

To hard reset device you do not need to tap screen
Simply turn off device or remove battery from device
If battery removed, re-insert it after a couple seconds
Hold down volume down and volume up and then press power on bottom
Continue to hold volume down and volume up until you are presented with white screen with text
Follow instructions and press volume up to hard reset

HardReset not help

rob971 said:
HardReset not help
Click to expand...
Click to collapse
Try to full charge first your phone, and after then, the others what were mentoined before, hard reset or flash again correct ROM !

help needed pls, again.

Hi Guys, i need help here
here's my problem, when i want to turn on the screen by using red button, my lockscreen is non-responsive, i cant slide down to unlock the screen.however, when i want to turn on the screen using other four buttons (rather than red button), i can slide down to unlock.
another thing is i can't shut down my phone, when i press the red button, the power menu appear but i cant touch the shut down menu. i try to use quick boot, but it only work for one time, after that when i press shut down from quick boot menu, nothing happend.
Now i'm using imilka ram desire hd, but previously my rom was rafpigna desire hd
i just don't know what happend to my phone

x3nophobia said:
Hi Guys, i need help here
here's my problem, when i want to turn on the screen by using red button, my lockscreen is non-responsive, i cant slide down to unlock the screen.however, when i want to turn on the screen using other four buttons (rather than red button), i can slide down to unlock.
another thing is i can't shut down my phone, when i press the red button, the power menu appear but i cant touch the shut down menu. i try to use quick boot, but it only work for one time, after that when i press shut down from quick boot menu, nothing happend.
Now i'm using imilka ram desire hd, but previously my rom was rafpigna desire hd
i just don't know what happend to my phone
Click to expand...
Click to collapse
Your hardware button have problem, many people have same problem.
Solution: Clean your hardware button, if still have problem, need change all hardware button

i'm sry, how can I do that? cause i have no idea about it :s

x3nophobia said:
i'm sry, how can I do that? cause i have no idea about it :s
Click to expand...
Click to collapse
you should disassamble it. i think there are videos in youtube for this

mutil said:
you should disassamble it. i think there are videos in youtube for this
Click to expand...
Click to collapse
thanks lang and mutil, i will try it

i found this video
http://www.youtube.com/watch?v=cL-jnUKufC4&feature=player_embedded
do i have to do all the step in the video? or where is the step that i should take to clean the hardware button?

x3nophobia said:
i found this video
http://www.youtube.com/watch?v=cL-jnUKufC4&feature=player_embedded
do i have to do all the step in the video? or where is the step that i should take to clean the hardware button?
Click to expand...
Click to collapse
yes unfortunately.........its better bein safe than sorry lol.........i took mine apart around 2 months ago,due to abit of the same prob,my power button wouldn't work all the time or i had to press it down quite hard and i wanted to check my battery pins also. the hardest part is getting hold of the right size screwdriver to undo the phone lol............the rest is easy........if u do take it apart,whilst your there,it wouldn't do any harm to check the pins that connect to your battery,checkin they're not bent or dirty,cos that is why people have a battery drain lol and then they go to all these places to find solutions,task killers etc,when most of the time,the problem is right infront of them.........
HOPE THIS HELPS.............FEEL FREE TO HIT THANKS

langthang said:
Your hardware button have problem, many people have same problem.
Solution: Clean your hardware button, if still have problem, need change all hardware button
Click to expand...
Click to collapse
how do i clean it? vaccum cleaner or air blower?