I installed the above, which I found in the Kaiser forums, on my Touch Cruise and it feels snappier and no error was displayed. Clearly it came with the version 2.0.7045.00.
I have attached a text output which was generated on my device, for interpretation by more sharper minds here Can we have a benchmark to see if the non ROM installation makes any difference
I thought .net CF3.5 is required by the applications coded to use it. Neither could it speed up existing apps coded with .net CF 1.0/2.0 nor your device.
Do you think I'm wrong?
Regards,
Carty..
Carty said:
I thought .net CF3.5 is required by the applications coded to use it. Neither could it speed up existing apps coded with .net CF 1.0/2.0 nor your device.
Do you think I'm wrong?
Regards,
Carty..
Click to expand...
Click to collapse
Please read this, and do further reading on the topic elsehwere
http://forum.xda-developers.com/showthread.php?t=347537&highlight=netcf+3.5
Carty, yes, you're correct that ".net CF3.5 is required by the applications coded to use it." But that is not the only benefit of 3.5. It also should speed up other apps that will work with 2.0. To make a long story short, .NET versions generally are backwards compatible and new versions generally are better. The issue -- and victoradjei please correct me if I'm wrong -- is whether you'll see this performance increase without uninstalling 2.0. And you can't uninstall it like you'd remove a program. It probably takes a new ROM. That's why victoradjei is asking for a "benchmark to see if the non ROM installation makes any difference." victoradjei, I hope I have this right.
GenghisKhent said:
Carty, yes, you're correct that ".net CF3.5 is required by the applications coded to use it." But that is not the only benefit of 3.5. It also should speed up other apps that will work with 2.0. To make a long story short, .NET versions generally are backwards compatible and new versions generally are better. The issue -- and victoradjei please correct me if I'm wrong -- is whether you'll see this performance increase without uninstalling 2.0. And you can't uninstall it like you'd remove a program. It probably takes a new ROM. That's why victoradjei is asking for a "benchmark to see if the non ROM installation makes any difference." victoradjei, I hope I have this right.
Click to expand...
Click to collapse
Perfect
hehe my rom has 3.5 already cooked in
Pawel062 said:
hehe my rom has 3.5 already cooked in
Click to expand...
Click to collapse
So why not let me test it until yours comes
victoradjei said:
So why not let me test it until yours comes
Click to expand...
Click to collapse
yes i would but hardspl isnt working properly. i think we might need to get oli a device first before a hardspl is done bc raskell device might not like the spl bc its a proto or it might be the polaris spl all together. dont worry we keep trying though to do it without device.
victoradjei said:
I installed the above, which I found in the Kaiser forums, on my Touch Cruise and it feels snappier and no error was displayed. Clearly it came with the version 2.0.7045.00.
I have attached a text output which was generated on my device, for interpretation by more sharper minds here Can we have a benchmark to see if the non ROM installation makes any difference
Click to expand...
Click to collapse
Does work all the applications after the upgrade install..??
i have found this:
List of applications not working:
Advanced Configuration 1.0
PIM BackUp 2.5
SIPChange 1.0
Hibernate 1.4
Touch Settings 1.22
HTC Home Customiser
And a few more which I can't recall
qtek_metanol said:
Does work all the applications after the upgrade install..??
i have found this:
List of applications not working:
Advanced Configuration 1.0
PIM BackUp 2.5
SIPChange 1.0
Hibernate 1.4
Touch Settings 1.22
HTC Home Customiser
And a few more which I can't recall
Click to expand...
Click to collapse
bc the cab available isnt complete. meaning u should wait for a rom with it cooked in.
Pawel062 said:
yes i would but hardspl isnt working properly. i think we might need to get oli a device first before a hardspl is done bc raskell device might not like the spl bc its a proto or it might be the polaris spl all together. dont worry we keep trying though to do it without device.
Click to expand...
Click to collapse
How much more do we need to get Oli's device? An update would be nice, like on the athena project. If we have money for the first device, it is still in stock here in Nederland, so I could buy it and mail it to you guys
so far the donations are standing still at 85USD. about 683 is needed for a device thats using mobileplanet unless we can find something cheeper. im pretty sure if i had the device in hand we would get a hardspl done as im around cmonex and olipro enough during the creation of hardspl to be able to get it done with them enough but of course i plan to get them the device first.
Alright. Expect 50 USD from me. Which of the links shd I use Oli's own or yours
victoradjei said:
Alright. Expect 50 USD from me. Which of the links shd I use Oli's own or yours
Click to expand...
Click to collapse
use the one in my sig that says polaris project. i forgot to tell tom to just give the polaris project link but told olipro he might also get donations to his paypal. just send to the polaris project account as it is easier to keep track of them.
btw all donations are always shown in the polaris project thread the with donators name and the amount.
Pawel062 said:
use the one in my sig that says polaris project. i forgot to tell tom to just give the polaris project link but told olipro he might also get donations to his paypal. just send to the polaris project account as it is easier to keep track of them.
btw all donations are always shown in the polaris project thread the with donators name and the amount.
Click to expand...
Click to collapse
Alright, said amount sent. But I could not find the link to the Polaris project site
yea. no site yet. still debating if one is needed. hmm might make a poll tommorw. btw happy new year from the USA!!!
Happy new year to you too my friend
Guys if an application was compiled using .NET 2.0 and your mobile has .net 2 & 3.5, the application will use .net 2.0.if 2.0 isnt installed then the app will attempt to use 3.5
Pawel062 said:
hehe my rom has 3.5 already cooked in
Click to expand...
Click to collapse
I think, all cooked kaiser ROM's with NETCF 3.5 are not better.
panosha said:
I think, all cooked kaiser ROM's with NETCF 3.5 are not better.
Click to expand...
Click to collapse
Now that's really depressing
Related
OK BeeJive has released Jivetalk (alpha) for WinMo6.x pro devices
It is truly a marvel on my Hermes(Cingy 8525)
Heres my issue I cannot get it to run for the life of my on my Herald(tmo wing)
I have tried several roms and it wont work
Open Touch, Touch-IT, and another i cant remember at this time
I want some other Wing users to see if they have the same issue also
Also I will post some screenshots to make your mouth water!!
yeah i have open touch 4.0 lite and it doesn't work, fails to startup. when i had the original tmobile rom on my wing, it worked.
The JiveTalk cab of yours work perfectly on my O2 terra, a Herald variant.
Used to use Palringo until today but JiveTalk seems to take over that place, thanks btw
I checked out the Jive site and there you could make a HTC P4350 and a T-Mobile Wing selection.
I'm not sure if this is just a marketing questionaire or a hardware id related question field.
Which version did you pick?
When I login to various IM networks the status messages is "On HTC P4350",
my assumption is that it could be hardware related.
Try if selecting the Wing version makes a differences if not try to use JiveTalk over WiFi,
because your mobile carrier might block the appropriate port via proxy.
CONFIRMED
ultraman69 said:
yeah i have open touch 4.0 lite and it doesn't work, fails to startup. when i had the original tmobile rom on my wing, it worked.
Click to expand...
Click to collapse
FLASHED BACK TO TMO ORIGINAL (on my HERALD)
And it worked like a charm
This app is tht HOTT to me
I cant understand why it wouldnt work with the custom roms though
Make a ROM cooker cn shed some light on that
PS: Your Welcome Gambit.
I figure get it while its free!! because one day it will cost $
Im keeping a copy of every version, but i believe on first startup it will authenticate to jivetalks server first so that maybe frivolous
UPDATE
Now WORKING on Binky11's v3.3 ROM (On my Hermes) ALSO!!!
VP3Gv3.62 WORKING
Working on Vp3G 3.62 Hermes ROM!!!
looks like v 0.5.2.13 is out, it is still not working for me on ot4 lite. getting a typeloadexception, anyone have any ideas?
ultraman69 said:
looks like v 0.5.2.13 is out, it is still not working for me on ot4 lite. getting a typeloadexception, anyone have any ideas?
Click to expand...
Click to collapse
The roms it doesnt work on are because they do not have SQLCE cooked in
Must be "cooked in" for jivetalk to work
Works on all Binky11's ROMS and all vp3G's as well
SQLCE and .NET CF are both required for JiveTalk to work.
I haven't managed to get Jivetalk to work on my phone, after trying to install everything... still errors every time...
duprade said:
SQLCE and .NET CF are both required for JiveTalk to work.
I haven't managed to get Jivetalk to work on my phone, after trying to install everything... still errors every time...
Click to expand...
Click to collapse
Same here. Got .NET CF 2.0, 3.5 and SQL CE installed and still no luck.
Itje's 7.1 ROM was the the last ROM JiveTalk could run properly.
Anybody know how to enable the today plugin for the newest JiveTalk? It's not under start>settings>today>items.
you have to download it separately. after you do that and install it will show up where the normal today plugins show up in that list. it shows up for me.
does anyone know where it saves logs? or how to delete them? i think they are taking up a lot of my memory, i only have 3.2MB left and i am not putting ANYTHING on my phone and cleartemp clears like 500KB
Care to show me the download for the today plugin because it's nowhere to be seen on there site =O?
i couldn't begin to tell you where it is. the only reason i know about it is because when i updated it told me i can either edit a css file (or something) to have it work or install the cab that will automatically add it.
just checked, i don't have the cab anymore.
has anyone gotten it to work with cooked roms?? im using heralds serg's rom?? thanks guys!!
I went back to the OEM and got the today plug-in back. It is working fine on my ROM (for the Kaiser).
i emailed bee jive people and they told me it should work on custom ROMs.
however, i have a tmo wing running on papa black diamond but it doesnt work however many times i tried it. i used to have it on my blackberry and it is really the best messaging software out there
**EDIT - i found a solution to the problem.. follow instructions and install the following from this topic:
http://forum.xda-developers.com/showthread.php?t=370772
Unbelievable...
thanks cbbplanet, I never thought I would ever see JiveTalk running on Papamopps' ROM.
I know it runs out of the box on Itje's, ICP's and tttrans's ROMs, but i never got it to work on this one.
Perfect, you made my day
cbbplanet said:
i emailed bee jive people and they told me it should work on custom ROMs.
however, i have a tmo wing running on papa black diamond but it doesnt work however many times i tried it. i used to have it on my blackberry and it is really the best messaging software out there
**EDIT - i found a solution to the problem.. follow instructions and install the following from this topic:
http://forum.xda-developers.com/showthread.php?t=370772
Click to expand...
Click to collapse
NIIIICE
Alas we have upgraded to KAISER's
But good to know !!
Anyone know how to make it work with tzones proxy?
smanzor88 said:
has anyone gotten it to work with cooked roms?? im using heralds serg's rom?? thanks guys!!
Click to expand...
Click to collapse
Works fine on mine, using opentouch 5.1
i just test Manila 2D (http://forum.xda-developers.com/showthread.php?t=398173&page=110)
it doesn´t work on my Blueangel (latest xplode beta rom)
does any version work for you ?
if yes, please post manila 2d version and rom version
it is not working on devices that do not support touchflo, currently BA and himalaya and i think prophet, all other have ported touch.dll (touchscreen driver) which is compatible with touchflo
Thats why it does not work on non htc devices either
xplode said:
it is not working on devices that do not support touchflo, currently BA and himalaya and i think prophet, all other have ported touch.dll (touchscreen driver) which is compatible with touchflo
Thats why it does not work on non htc devices either
Click to expand...
Click to collapse
do you think that it might be possible to make Manila2D point towards Ftouchflo instead of the actual touch.dll?
egzthunder1 said:
do you think that it might be possible to make Manila2D point towards Ftouchflo instead of the actual touch.dll?
Click to expand...
Click to collapse
You took the question out of my fingers..
motisu said:
You took the question out of my fingers..
Click to expand...
Click to collapse
You know what they say: "Great minds think alike"
check the recent posts, manila now works
so far slows booting (around 5 minutes) after complete startup it is fast and stable, also i will publish my edition of cabs because in herg's thread there are too many crapware which is not needed for manila
Do you have a link for this?
D-Jay said:
Do you have a link for this?
Click to expand...
Click to collapse
Manila 2D first post
Works much faster if you load the 2d manila cab first then patch followed by the other programs than the sequence described in the installation read me.
sun_dream's rom can install, trust me...
i am using
xplode said:
check the recent posts, manila now works
so far slows booting (around 5 minutes) after complete startup it is fast and stable, also i will publish my edition of cabs because in herg's thread there are too many crapware which is not needed for manila
Click to expand...
Click to collapse
Using your 'patched' Taskmanager, Album and Audio with herg's #15 + #16 +#1(common dlls) works fine for me on Blueangel and my Atom, Saved 13MB of space!!!
Thanx for optimising it so much.
well thanks, this is the way it should be
I think xplode is right here, I also would like to say the same.
xplode said:
so far slows booting (around 5 minutes)
Click to expand...
Click to collapse
I'm using your cabs on Helmi's WM6 with Evil3000's German Language Patch applied and couldn't notice any significant speed hits on my BA. Boot-up is slowed down by no more than ten seconds. Excellent work, xplode, thank you very much for your excellent work.
well my first test cabs slowed down the device, but after this post i made a huge progress
any way to get touchflo 3D working ?
http://forum.xda-developers.com/showthread.php?t=430718
installation take 2h, and after soft resett my BA was unable to start.
keeps hanging in bootloader.
i had to hard resett.
well touchflo 3d may work in near future but it slows down the device a lot
wmvfan said:
any way to get touchflo 3D working ?
http://forum.xda-developers.com/showthread.php?t=430718
installation take 2h, and after soft resett my BA was unable to start.
keeps hanging in bootloader.
i had to hard resett.
Click to expand...
Click to collapse
Actually, it doesn't hang the device, it just makes it ungodly slow. It actually takes close to 1 hour for the device to get past bootloader (yes, I waited that long )
But after that, it just gets stuck in the "Tap Here to Start TF3D" and "Launching TF3D"
It looks like M2D all over again, which tells me that there might be a similar set of issues with this port as there were with M2D. In other words, the reason for this thing not starting up is probably the same as for M2D... just a thought though
egzthunder1 said:
Actually, it doesn't hang the device, it just makes it ungodly slow. It actually takes close to 1 hour for the device to get past bootloader (yes, I waited that long )
Click to expand...
Click to collapse
Doh, I just tried to install m2d from the main development thread (v20). Took a while to install and when I did a reset it just stayed at the 4 color bars screen. I assumed it was dead and did a hard-reset. Didn't think to let it sit that way for an hour! lol
Going to try and install this xPlode version now.
I'm a little confused as to the versions though. Are we only supposed to install the xPlode version, or will we be able to install updates from the main m2d dev thread?
M2D v20
sschrupp said:
Doh, I just tried to install m2d from the main development thread (v20). Took a while to install and when I did a reset it just stayed at the 4 color bars screen. I assumed it was dead and did a hard-reset. Didn't think to let it sit that way for an hour! lol
Going to try and install this xPlode version now.
I'm a little confused as to the versions though. Are we only supposed to install the xPlode version, or will we be able to install updates from the main m2d dev thread?
Click to expand...
Click to collapse
That's because that version is not yet ready for non-htc or older devices like blueangel. Hopefully they will get that to work. But i prefer xplodes version for our kind of device cause that's the perfect installation made yet for all devices.
IMPORTANT ------> Perform a hard reset after flashing new roms <------- IMPORTANT
If you report issues I know is related to you not doing a HR after new flash, you will in most cases not get a answer from me.
Also reporting issues allready mentioned and confirmed is a waste of time.
Hi,
I am a newbie here @ XDA and after a lot of work and learning I managed to build my first rom. I was looking for a dutch rom with manila after I tried itje's m2d rom. But there was not one there, so I made one myself. Everthing is translated inside this rom to dutch (as far as I know). I hope someone will use this and leave a message.
This is how I cooked my rom:
- I have used a shipped Windows Mobile 6.1. rom
and added (and translated):
- Manila2d (black theme)
- Manila Configurator
- 3D drivers
- Youtube
- Googlemaps
- Album
- Opal Volume Control
- Audio Manager
- Task Manager
- Opera 9.5
removed nothing (can make a lite one if people want that)
I used the orginal dailer because I use videodailer very often and it's working.
I used the orginal camera because it have auto-focus function.
I want to say thanks to UDK for his briljant kitchen.
I also want thank the Polaris 3D Development theme for their great 3d drivers.
And I wanna say special thanks to NeoS2007 for his quick reply's and great help to my stupid questions.
I did put a lot of work in this rom. It is running fast and stable, I didn't found bugs for now so please report found bugs.
Known bugs:
- analog and digital clock are "on" by default, can be changed by manila2dcustomizer
- video from album not working
- status bar is not showing correct
I don't know how to make screenshots, so if somebody can please make them for me I will be very happy, because I really to tired right now.
Here is the downloadlink http://rapidshare.com/files/153976144/FLAXJEFv1.0_DUTCH_6.1.rar.html
Have fun with it, please let me know if you are using this rom.
gereserveerd
W00t! nice!
ughh stomme vraag, verwijderd
ughh stupid question, deleted
Is it very hard for you to cook a rom with the new dialer (without video dialing) and with the new camera?
Like making a second version next 2 this one?
one without and one with the new dialer and camera?
nice, welcome as a chef for polaris
itje said:
nice, welcome as a chef for polaris
Click to expand...
Click to collapse
thanks, I love your work your rom inspired me to become a chef
Fontanini said:
W00t! nice!
ughh stomme vraag, verwijderd
ughh stupid question, deleted
Is it very hard for you to cook a rom with the new dialer (without video dialing) and with the new camera?
Like making a second version next 2 this one?
one without and one with the new dialer and camera?
Click to expand...
Click to collapse
I could do that, but then you no longer have a working videocall and crappy pictures. I don't know if a lot of people want that
flaxjef said:
I could do that, but then you no longer have a working videocall and crappy pictures. I don't know if a lot of people want that
Click to expand...
Click to collapse
Well, i also don't know if a lot of people use or don't use videocall.
I am wondering what if i flash this rom to my phone and after that install a cab with the opal dialer. Will this work?
Fontanini said:
Well, i also don't know if a lot of people use or don't use videocall.
I am wondering what if i flash this rom to my phone and after that install a cab with the opal dialer. Will this work?
Click to expand...
Click to collapse
I think you can flash your dailer, but I am not sure about the camera.
I thought when you install camera you will get erorrs.
hmm crap
maybe one rom with old camera and one with the new.
And in both provide the 3g dialer.
After that you could still flash the new dialer right?
And also go back to the 3g dialer
maybe i'm gonna cook my own rom, but how did you translate those programs and maybe you could provide the translated packages?
Fontanini said:
hmm crap
maybe one rom with old camera and one with the new.
And in both provide the 3g dialer.
After that you could still flash the new dialer right?
And also go back to the 3g dialer
maybe i'm gonna cook my own rom, but how did you translate those programs and maybe you could provide the translated packages?
Click to expand...
Click to collapse
Can you give me the cab of the dailer you want to install ?? (check pm)
I will try to instal it for you on my phone
flaxjef said:
I don't know how to make screenshots
Click to expand...
Click to collapse
That´s easy: MagicSS. Good luck with the dutch romcooking. I might just try it one dat when I get fed up with udK Diamond R8.
easier
my mobiler: install to your computer, connect your device....
deechte said:
That´s easy: MagicSS. Good luck with the dutch romcooking. I might just try it one dat when I get fed up with udK Diamond R8.
Click to expand...
Click to collapse
thanks will make screenshots later, thanks for help
itje said:
easier
my mobiler: install to your computer, connect your device....
Click to expand...
Click to collapse
thank you great app!
flaxjef said:
This is how I cooked my rom:........
I don't know how to make screenshots, so if somebody can please make them for me I will be very happy, because I really to tired right now.
Click to expand...
Click to collapse
That is really funny, sorry must saying this.... You know how to cook a ROM, but dont know how to make a screenshot! But, welcome a board!
Hey FlaxJef,
Nice to finally see your ROM. Glad to know I could help you.
It's also good to see a Dutch chef around. (Lexi1986 was the last one, but he sold his Polaris, and I suck at making roms)
So, glad you're on board!
NeoS2007 said:
Hey FlaxJef,
Nice to finally see your ROM. Glad to know I could help you.
It's also good to see a Dutch chef around. (Lexi1986 was the last one, but he sold his Polaris, and I suck at making roms)
So, glad you're on board!
Click to expand...
Click to collapse
Thank you very much. I wil keep updating as much as I can, but I am very new here and could use some help sometimes I stil have to learn a lot I think.
I am allready looking at tf3d right now, let's translate everything all over again.
Looks like this is a very clean ROM, with Manila2d and some basic stuff needed by it. Could you cook a WWE ROM just like this one?
just flashed my phone to this rom:
some little bugs:
-analog and digital clock are "on" by default but can be changed with the manila2d customizer
- video from album not working
- status bar is not showing correct
Phantom1275 said:
Looks like this is a very clean ROM, with Manila2d and some basic stuff needed by it. Could you cook a WWE ROM just like this one?
Click to expand...
Click to collapse
Ok I can do that but, I will start in a couple of days, I wil put it a different post, Í'll let know where to find it
well
i tried many " cab " , but all of them had some problems
so is there any which work perfectly???
I tried a couple of .cab installs of TF3D but had similar frustrating problems. So I bit the bullet and installed Jack's v1.06 ROM [ http://forum.xda-developers.com/showthread.php?t=445818 ] and it's incredible. Very fast, stable and looks great.
I think it's the only way to get this properly working on the X1 for now.
What is the difference between it and the standard rom? The stuff it adds are available from apps
dadeadman said:
What is the difference between it and the standard rom? The stuff it adds are available from apps
Click to expand...
Click to collapse
If you read the first post in the thread, you'll see what the difference is
So if i dont really need the extra memory freed up by the removed portions, the rom is as good as generic?
mmmm
thanx for this help
but actually i was only looking for adding it like a software
more than changing my rom..
so i think i have to wait bit more , maybe one can do it
Touch-IT TF3D works quite well for me. better than the FullHDManila cab...don't asky why.
derliebewolf said:
Touch-IT TF3D works quite well for me. better than the FullHDManila cab...don't asky why.
Click to expand...
Click to collapse
could you please link the page that you download the Touch-IT TF3D? There seems to be so many cab. files that it is so confusing which cab. to download. thanks
look no further than here: http://forum.xda-developers.com/showthread.php?t=441439
Simple question.
I've read about the new features of the 3rd version of Touch Flo (on the upcoming HTC Touch Pro 2 and Diamond 2) and they are quite interesting.
I just wondered whether by any chance this new version could be installed on the HTC HD (once it's out of course)
Thx
there are already tons of custom roms with this new tf3d
Oh! I wasn't aware of that... have an example so I can test it?
gauthierserkyn said:
Oh! I wasn't aware of that... have an example so I can test it?
Click to expand...
Click to collapse
Duttys Roms, Laurentius Roms,...
gauthierserkyn said:
Oh! I wasn't aware of that... have an example so I can test it?
Click to expand...
Click to collapse
Think the list is endless. Go to ROM's development forum and seach. I'm currently using Duttys 2.5 Xtreme, though Laurentius & Davideuck are just as commonly used
crashDebug said:
there are already tons of custom roms with this new tf3d
Click to expand...
Click to collapse
hi...is there any way of getting new touch flo 3 without need of flashing ur phone? any chance of someone making an instalation .cab?
marasp said:
hi...is there any way of getting new touch flo 3 without need of flashing ur phone? any chance of someone making an instalation .cab?
Click to expand...
Click to collapse
Go to the "Themes, Applications and Software" and you will found you cab's
excuse me for being a nub but what are the benefits of flashing vs cab install
nowhere to be seen
Elim said:
Go to the "Themes, Applications and Software" and you will found you cab's
Click to expand...
Click to collapse
well... i always do my home work before posting, that is why i did ask question...i could not find any cab, and believe me i spent hours looking throughout our gigantic forum...
if u know location where such cab is hiding from my eyes please share it with us.
There is no "cab" install and there never will be.
This isn't just an application you install on your phone - it's a complete system overhaul, with new TF3D, with all new and / or updated system applications: phone, calendar, contacts, call history, calculator, browser etc.
Let me illustrate however the difference between the stock ROM and the custom cooked ROM's available here on XDA. It's like going from Skoda to latest Ferrari.
That means you'll get a lot of great looking stuff, many cool applications already included, everything will be as new as possible, you'll be running at MUCH faster speed, but you also have to accept that you'll "burn more gas" - battery life may take a small impact.
Is it worth it? Well, it's like you bought a new device, so - yes.
bigv1 said:
excuse me for being a nub but what are the benefits of flashing vs cab install
Click to expand...
Click to collapse
If you flash a ROM that already includes the new manila it will probably be alot smoother because the ROM will be optimized and tweaked for it! If you install it over the old Manila it probably won't give you the best experience... Also, the newer ROMs not only include the new Manila, but also things like finger-friendly menus!
really is that true???
Rozenthal said:
There is no "cab" install and there never will be.
This isn't just an application you install on your phone - it's a complete system overhaul, with new TF3D, with all new and / or updated system applications: phone, calendar, contacts, call history, calculator, browser etc.
Let me illustrate however the difference between the stock ROM and the custom cooked ROM's available here on XDA. It's like going from Skoda to latest Ferrari.
That means you'll get a lot of great looking stuff, many cool applications already included, everything will be as new as possible, you'll be running at MUCH faster speed, but you also have to accept that you'll "burn more gas" - battery life may take a small impact.
Is it worth it? Well, it's like you bought a new device, so - yes.
Click to expand...
Click to collapse
is that really..... so could u explain to us what that is http://forum.xda-developers.com/showthread.php?t=493531 ..... i think it is possible.... manila is at the end, today screen replacement like the ones of SPB and others.... of course its complicated and incorporated into windows folder but as u can see impossible is nothing here ....
regards
marasp said:
well... i always do my home work before posting, that is why i did ask question...i could not find any cab, and believe me i spent hours looking throughout our gigantic forum...
if u know location where such cab is hiding from my eyes please share it with us.
Click to expand...
Click to collapse
I'm pretty new to all this as well and had a lot of difficulty figuring it out! What I think happens is this: The ROM is a bit like the BIOS so you can't modify it within WM6.1. Also, the original ROMs are protected so you can't replace them with an unofficial version (they are signed).
To get around this, you can use something like Hard SPL (which overwrites the existing ROM) or USPL (which works around it).
I finally went with USPL2.5 and Dutty's extreme ROM v2.6.
Incidentally, I'm not really noticing much of a speed improvement... Especially with the music player which now takes a second to load up... Am I meant to?