Related
I have a SX-56 with AT&T. As many of you know, AT&T service has gotten pretty bad and they are no longer adding sites that use 1900. T-mobile still services 1900. My questions are the following:
1. Should I unlock the phone so that I can have T-mobile service. I have read posts where the AT&T rom does not work well with T-mobile service.
2. Have any of you done this in Southern California and experienced problems?
3. Also considering upgrading to PPC 2003 but I've read posts of damaged roms. Really can't afford to lose my phone till I get a new one. Should I upgrade before or after unlocking?
I am new to a PPC phone but have used a PPC for a while. I do not understand the terminology with cooking roms and such. If someone can break this down for me in very easy to understand information, it would be appreciated.
Thanks.
Your current RSU can still work with TMO if the device is unlocked. There are 2 ways to unlock:
1. Use the XDAunlock tool. This will keep your current ROM.
2. If the above doesn't work, you have to flash your device with the special edition ROM v1.2 which will unlock your device with the first boot.
Then it will be your decision to stay on PPC2002 or to upgrade to WM2003. ROM flashing is very safe process if you know what ur doing, but stay away as possible from RSU flashing.
Good luck
Last Night I made a clean install of the 2.26 rom on my wizard and I have to say, overall peformance is way better than the previous roms ive used. On my previous roms, the highest speed I got up to when surfing the net was 79 kbps, with the 2.26 rom, ive got true edge speed going up to 155kbps. Service never drops, and its much much faster. Although I excluded all t-mobile customizations since they are really no use at all. I get 4 bars almost everywhere I go. Streaming radio audio never drops. So, for me this has been the best rom that Ive used. Finally T-mobile has done something appreciative.
I agree, having had two issues with the 1.08 ROM. First, Voice Speed Dial would lose its list about every five days and Speed Dial's list would become simultaneously corrupted, some items being recoverable, some not. I got so tired of re-creating the list I just quit using VSD. MS Voice Command is on order. Second, the handset speaker volume was too low even when at max volume.
I won't be using VSD again, but so far (two days) SD has not become corrupted. I'll be satisfied when a week passes without an incident. The handset speaker volume is improved, and I can now hear conversations in noisy atmospheres without as much straining.
I've also noticed that it is more stable, and faster. Overclocking at 240 makes the MDA run like my old Ipaq running at 400 mhz., and menus zip in and out, with programs loading faster. Soft resets are also faster.
In the past I've resisted loading new ROM's, but this time it seemed like the right time, especially with the hope those two issues would be fixed. I'd say I'm happy so far.
...
I just don't understand. I was using the old, custom 2.08 or something ROM and was doing just fine (other than it disconnecting sometimes)... and after upgrading to the 2.26 ROM, I can barely get any signal anywhere at all. I used to have four bars at home, now I'm lucky to get two and usually get one. Sometimes, I get zero and have to wait before making calls. This NEVER happened before.
Is there something I'm supposed to reset after upgrading my ROM? This just doesn't make any sense.
I will never learn. Everything was fine, except of course MS Voice Command & Bluetooth, on the ROM version my Wizard shipped with earlier in the year.
Friday I installed the T-Mobile 2.26 update, then reinstalled Goodlink. Fine, then Smartskey & RegistryWizard. Looking good, then Goodlink errored out. On a soft-reset, the Wizard hung at a Windows splash screen. Hard-reset, reinstalled Goodlink and Smartskey. Seeming fine for a while, installed MS Voice Command (skipping past the message about Microsoft being an unknown developer). Still ok, then a day later errored out again. A soft reset hangs the Wizard again at the Windows splash screen.
I'll try it now with just Goodlink.
is there anybody know how to install the rom only without the extended rom, as i need to keep my extended rom as it is.
ROM 2.26 on Dutch T-mobile MDA Vario
Hi people,
I wanted to know is it possible to install the 2.26 ROM on my Vario.
If I'm not mistaken the 2.26 ROM is the US version of the MDA Vario.
I'm currently using the MDA Vario Dutch OS. But would like to have the English OS.
Do I need to CID unlock and/or SIM unlock my device before attempting to install this ROM?
Is there any risk in attempting to install it without CID/SIM unlocking it.
Thanks in advance.
Shah
you probably can. im not really sure, but if its still the same phone provider, i dont think you have to cid/sim unlock the phone.
the US version should be fine...its runnig on my UK Vario
if you are running a v1 ROM (no push function) its worth CID and SIM unlocking now..cos at the moment there is no tool to do it on a v2 rom.
As long as your phone is a T-mobile, you dont need to CID unlock before upgrade, but if you wanted to use a QTEK/Imate rom, then you would
good luck..the upgrade is worth it
Thanks people for the quick response.
I will consider upgrading to the new rom.
But one last question is the language issue a problem for a ROM upgrade? I just want to be postive before going through with this venture.
Because T-mobile Netherlands give a 2 year warranty on the Vario, but if I install the new ROM even if it is the T-mobile (other country) ROM
my warranty will void (really stupid T-mobile)
and if the update fails for any reason. I will need to do some extra work for nothing.
Shah.
Update on Uk T-mobile Vario.
I cant get it to work on my vario. Comes up with "wrong vendor" error.
Please post a link or info for UK version please.
Thanks .
Re: Update on Uk T-mobile Vario.
Stu308 said:
I cant get it to work on my vario. Comes up with "wrong vendor" error.
Please post a link or info for UK version please.
Thanks .
Click to expand...
Click to collapse
You cannot install on a UK t-mobile wizard a USA t-mobile rom, even if they're both from t-mobile.
You must either:
- CID unlock your device if you're still using a 1.x rom (use lokiwiz 0.2b for the unlocking)
OR
- follow my tutorial to install the rom if you've got a 2.x rom (the tutorial is here: http://forum.xda-developers.com/viewtopic.php?t=56088 )
Bye
Thanks risidoro,
I will then try to unlock my 1.x ROM first and then update my ROM. I have interestingly followed other threads in this forum.
But I couldn't find any answer to the queston: When CID unlock in ROM 1.x is the device still unlocked when installing newer ROM 2.x?
In my case installing the US ROM 2.26 is it still unlocked??
EDIT: Reason is to find out if it might be possible to install or try other ROMs if I want to lateron.
Thanks in advance.
Shah
Shah2 said:
Thanks risidoro,
I will then try to unlock my 1.x ROM first and then update my ROM. I have interestingly followed other threads in this forum.
But I couldn't find any answer to the queston: When CID unlock in ROM 1.x is the device still unlocked when installing newer ROM 2.x?
In my case installing the US ROM 2.26 is it still unlocked??
EDIT: Reason is to find out if it might be possible to install or try other ROMs if I want to lateron.
Thanks in advance.
Shah
Click to expand...
Click to collapse
CID unlock is like death: you can have only one
[yes, CID unlock is sticky. Do it only once and it'll last forever, even if you go to 2.x]
Thanks Risidoro,
I'm gonna try the unlocking one of these days.
Just hope the US rom also corrects the errors in the ETEN dialer of PaulyA.
I think other language ROM aren't that compatible with the ETEN dialer.
Just love the phone dialer, only those stupid buttons (End button) that never becomes a Talk button.
Once again risidoro a lot of thanks.
Shah
lsnizzle said:
On my previous roms, the highest speed I got up to when surfing the net was 79 kbps, with the 2.26 rom, ive got true edge speed going up to 155kbps.
Click to expand...
Click to collapse
What are u using to test your edge speeds? i'm on 2.24 and would like to know what i'm surfing at. I tried a couple sites but they were giving me resulst of 6kbps and crap like that which is not true.
I use SPB GPRS Monitor to check the data rate. It works great, but it's not a freebie.
fone_fanatic said:
lsnizzle said:
On my previous roms, the highest speed I got up to when surfing the net was 79 kbps, with the 2.26 rom, ive got true edge speed going up to 155kbps.
Click to expand...
Click to collapse
What are u using to test your edge speeds? i'm on 2.24 and would like to know what i'm surfing at. I tried a couple sites but they were giving me resulst of 6kbps and crap like that which is not true.
Click to expand...
Click to collapse
I use this,
http://www.dslreports.com/mspeed?jisok=1
And this,
http://reviews.cnet.com/7004-7254_7-0.html
Hi Folks
I was wondering if someone know if the IMEI Unlocking services offered in many websites really work:
For example: http://www.gsmphonesource.com/reunbyimforc.html
It make the kind of unlocking like the unlocking software posted on this forum?
Thanks to all!!
Sergio
We have a FREE SIM unlocker which does the same, and more:
http://forum.xda-developers.com/showthread.php?t=282073
Ours keeps SuperCID forever, theirs not
Hi Pof
I have seen your great job. Thanks for that!
since I am just starting on this XDA world I dont want to mess with rom upgrading and stuff. So I felt that just entering an unlock code is 'safer' for now, but I wanted to know if that remote IMEI solution really works for using the phone with other SIM cards
Thanks!!!
Yes, it works. It has the same effect on the phone, but I really encourage you to try my solution instead, it's not that hard, but the warnings are there for you to be cautious
The IMEI is not used at all for unlocking, it's just to make sure you don't buy an unlocker from them and use it in two different devices: if you want to unlock two devices you have to pay twice
If you want to technically understand what their unlocker does, and what does mine, have a look at this post (comments #54 to #57):
http://forum.xda-developers.com/showthread.php?t=280819&p=1046444
My understanding is that the Cingular 8525 use BootLoader 1.06, which means that in order to unlock the phone, the BootLoader need to be downgraded to 1.04 (by installing older ROM), SIM unlock it, and then upgrade to new ROM with BootLoader 1.6.
This may seems complicated.
I used pof's method and had my phone up and running in less than an hour and it was FREE!
VideoFX
Call Cingular tell then u r going to europe
Call Cingular tell them you are going out of conutry and they will send you unlock caode for free in 5 days.
lanwarrior said:
My understanding is that the Cingular 8525 use BootLoader 1.06, which means that in order to unlock the phone, the BootLoader need to be downgraded to 1.04 (by installing older ROM), SIM unlock it, and then upgrade to new ROM with BootLoader 1.6.
This may seems complicated.
Click to expand...
Click to collapse
That's not true..
Grab pof's exe, and run the bat file. There's nothing else to do. Just sit, be patient and follow the instructions.
It's really brainlessly easy. That means, that even those without brains should be able to handle it...
LegolasTheElf said:
That's not true..
Grab pof's exe, and run the bat file. There's nothing else to do. Just sit, be patient and follow the instructions.
It's really brainlessly easy. That means, that even those without brains should be able to handle it...
Click to expand...
Click to collapse
So i am waiting my cingular 8525 in the mail, so all i need to do to get the phone sim unlocked and cid unlock is to follow the directions? no need to downgrade if i have 1.06
jemx33 said:
So i am waiting my cingular 8525 in the mail, so all i need to do to get the phone sim unlocked and cid unlock is to follow the directions? no need to downgrade if i have 1.06
Click to expand...
Click to collapse
It's easy. READ, READ some more, then READ till you puke. Then, follow the directions TO THE LETTER, and you'll be just fine. Nothing else to do. THEN, once it's unlocked, you'll want to flash a normal radio and a new OS.
As a newbie, I suggest you pay close attention to POF and Legolas; this stuff is EASY, but only because I've read the WIKI, lots of threads, then re-read the WIKI 2 or 3 more times.....then followed the instructions to the letter. And then go back to the WIKI just to stay sharp.
Reading the threads will give you an idea of just how many people do stupid things like NOT reading the WIKI, try flashing a new ROM or radio on a whim, follow only the directions they feel like, and turn a wonderful PDA/Phone into a useless brick. I've been around here only about 2 months but am now flashing ROM's on my CID/SIM Unlocked Cingular 8525 at will and having a ball. Will be joining the ROM Flasher's 12-step program soon.
So, read, pay attention, follow the instructions fully, read some more and read the threads so you can appreciate what happens when someone doesn't read, follow the instructions fully, etc.
Why Pay????
There's no sense in paying when POF's provided a great unlocking program here that's easy to use and works GREAT!!! This IS a no brainer.....
If you don't plan on going out of the country and wanting to change cell phone service provider, what is the benifit if unlocking the phone. I have been flashing my phone to different ROM's since the day I've had it.
I don't really see the added benifit of unlocking the phone...but then again I am a newb at this stuff.
If you have no plans on changing SIM cards, i.e. changing providers or travelling out of the country where you might want to use a local SIM to save $$, there's no need to SIM unlock your phone. If your phone is CID unlocked, then you are able to flash cooked ROMs' and ROMs' belonging to other carriers, i.e. flash a T-Mobile ROM to a Cingular phone. Unlocking also gives you access to the Extended ROM and several MB of storage space not otherwise avail to unlocked phones
Question, what difference if any is there between me getting the Unlock Code from ATT (just did it for some old V551's of mine with an email to them) and this Unlock tool of Pof's? I do plan to unlock it soon, planned on going the ATT route because I know it works. If your tool does something over and above I'd like to know.
Thank you!
question?
i'm wondering....im about to buy a 8525 tilt...i want to know:confused if i called cingular and asked for a unlock code would it cost me...also if i mess up and did it myself whats the worse that could happen to the phone......
b4mytime1 said:
i'm wondering....im about to buy a 8525 tilt...i want to know:confused if i called cingular and asked for a unlock code would it cost me...also if i mess up and did it myself whats the worse that could happen to the phone......
Click to expand...
Click to collapse
at&t would provide you with the unlock code for free. the worst of course is your phone turning into a brick, but if you are smart enough to follow instructions it will be fine.
and one more thing........which device are you getting......8525 tilt????? if its the 8925/tilt you are in the wrong subforum, you should be looking at the kaiser section. the 8525 does belong here
ok so i just got sent an att 8525. I am planning on unlocking this phone.
I havent been on these boards in forever but has anything changed? Is there anything in these rebranded att phones that may not let me unlock? is there a newer tutorial?
thanks guys
Hi,
I just wanted to share that I unlocked my 8525 with HTC_Hermes_SIM_CID_Unlock_v3a on Vista. It went through with not one issue or hiccup.
Thanks
Greg
I got my Vodafone1605 with wm5 installed. Do I lose my warranty(I bought it from Vodafone) if I apply official HTC WM6 upgrade for Hermes?
in a word, no.
Few things you should do first tho.
First off, if you want to use your phone with other network sim cards try unlocking it.
http://forum.xda-developers.com/showthread.php?t=293665
Dont CID unlock though, cos that will remove your warranty. Basicly follow the install procedure, but when it asks what you want to do just tick network unlock.
Then you should install Hard SPL v7
http://forum.xda-developers.com/showthread.php?t=296722
Its a very very simple install that will not screw your warranty, but will allow you to install any rom, be it official or a cooked one and will make it much less likely to brick your phone.
You will probably get bored off the official rom really quickly, so its worth looking at a cooked rom, they offer better features, run faster, take up less room and look a lot better.
Heres two I would recommend.
http://forum.xda-developers.com/showthread.php?t=349338
http://forum.xda-developers.com/showthread.php?t=359458
and keep an eye on this, looks gooood
http://forum.xda-developers.com/showthread.php?t=363782
One thing you should remember, there is always a risk of ****ing up your phone when upgrading the rom, radio or anything. Hard SPL removes 99.99% of that risk, but there is still always a chance. But there is guides here of what do if anything happens.
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Any other questions have a search on the forum, if you cant find anything ask, someone should help.
Hi,
There are no official software up dates for the V1605 available from Vodafone. If you do decide to change the software to something that isn't supported by Vodafone you will in fact invalidate the warranty.
We have explained this in more detail here.
Techgirl
Vodafone UK
Funny how my device was replaced under warranty after id flashed it a dozen times, I just installed the original rom again and now one said a thing.
does the hard spl backup the original rom?
no, hardspl allows you install different roms. If you want to revert to the original rom you can. Its on this site.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Its one of the two english vodafone ones....
I found a CD in the phone package and there are windows mobile 5 geniune stickers and eula and stuff like that, can the original rom be there?
Not likely.
so where can I get the original ROM? It's czech vodafone rom
Czech rom doesnt seem to be on this site, it will be around somewhere tho.
I just managed to get the original rom. So, if I flash now, are you absolutely sure that after the "flash the original rom back" thing they won't recognize anything at the repair service?
PLS, quick reply, I'm deciding whether to get a cashback for the SDHC or to keep it
AVN37 said:
And if I copy THE WHOLE content of the memory card to my HDD, flash some wm6 rom, will it be recognized if I just put those old files back? It won't be like the original, will it?
Click to expand...
Click to collapse
The contents of your memory card will still be threr after you flash a newer ROM to the device, the memory card isnt changed at all.
I would recommend you take some time to read through the WIKI PAGES on the hermes before continuing with any upgrades.
Hello
I've just unlocked my Hero which was on T-mobile and I LOVE IT!!!!
the thing is now, that HTC has released an update for it, and im willing to do it, but i have no idea what will happen with my sim..will it be locked back to t-mobile again??or will it remain unlocked??
unlock
i use android2.1 now ,new rom not need unlock
jacky83 said:
..will it be locked back to t-mobile again??or will it remain unlocked??
Click to expand...
Click to collapse
ylsq1047 said:
new rom not need unlock
Click to expand...
Click to collapse
.... Yeah, what YLSQ meant is that if you unlocked with a network unlock code then upgrading ROMs "SHOULDN'T" re-lock your handset. But I hope you've kept a copy of that code incase its ever needed again. It should always be valid as it is IMEI specific.
The only issue I could see possibly arising is that some ROM's are "PERFECT SPL's". What this basically means is that the networks got wise and shut the door on being able to edit the internal software stuff. I dont know what affect installing a perfect SPL onto an unlocked handset would have though. If worst came to worst, you could always downgrade your ROM again and unlock again.
If I was you, I would stay away from the official updates anyway. I highly recomend putting MCR3.2 on for now until an offical 2.1 ROM has been released and tweaked by some of the genius devs on here or Modaco.
If for any reason (?!?) you would prefer a stock ROM, I would use one of the ROMs from Modaco's Stock ROMs + radios in update.zip format for GSM Hero. However, it does take abit more work to get these flashed onto your phone, in comparison to just going to HTCs site and running an exe application.
Check out BTDAG's guide linked in my signature.
I hope your still awake after taking all that in!!!!