I'm thinking about developing a small app that changes the mac address of the wlan card on the Kaiser in WM6. Before I take the plunge, does anyone know of any code floating around out there similar to this (VB /c++ / c#)?
I wouldn't want to reinvent the wheel (again).
not really an code exm but could give some pointers
http://forum.xda-developers.com/showthread.php?t=309035&highlight=Mac+Address
Rudegar said:
not really an code exm but could give some pointers
http://forum.xda-developers.com/showthread.php?t=309035&highlight=Mac+Address
Click to expand...
Click to collapse
Thanks for that. The deeper I look, the information becomes more obfuscated for WM6, but a little reverse engineering should reveal the method
Update
The solution is going to be with OpenNETCF and I'm not too far off on having my beta
seattleweb said:
The solution is going to be with OpenNETCF and I'm not too far off on having my beta
Click to expand...
Click to collapse
Did u get the software done?? Didnt see anywhere around. It's been more than a year ... almost 2 yrs now. Any solution to this?
EDIT: I found this in some other thread which worked for me http://forum.xda-developers.com/showpost.php?p=3718638&postcount=23
Gud luck to all trying it out. But remember you hav to do it in WindowsXP. Vista doesn't work.
Related
Hi Guys.
I use the flashlight a lot. It comes in handy but is a bit of a pain having to switch the camera on to use it.
I tried looking through the whole of the registry to see if I could find a way of switching it on without the Camera but no luck. If I could do it' I would either set up a voice command to use it or use one of the buttons directly to run a program to switch it either on or off depending on what it's state is now.
Is it possible or is the flashlight's functions restricted purely to the Camera?
Thanks in advance
Brian
Vijay of the forum has been working on this project with Vjcandela - as yet no joy, but we are forever hopeful :mrgreen:
see here http://forum.xda-developers.com/viewtopic.php?t=41642
Won't somebody please, give me a Wizard?!?
Just joking...
btw, can someone try Haret on the wizard and check if that starts up the flash. If it does, I'll reverse engineer from there. I don't have a wizard and can't test the more elegant driver based solution without the hardware.
V
vijay555 said:
Won't somebody please, give me a Wizard?!?
Just joking...
btw, can someone try Haret on the wizard and check if that starts up the flash. If it does, I'll reverse engineer from there. I don't have a wizard and can't test the more elegant driver based solution without the hardware.
V
Click to expand...
Click to collapse
Tried haret on my wizard vijay - application wouldn't even start
meschle: thanks for trying it. I'll get a Wizard one day. Until I get more HTC hardware to reverse engineer, I'm not really clever enough to implement a more generic solution. For now, Universal and variants only I think.
Hey, and thank you again for your PMs
V
I've been very reluctant to use any methods that require using someone's personal server so I have been searching all over for a better method. I have finally found it! Its been successful for every town/city I've added. Here is the link to the process:
http://www.htc-touch-info.com/en/weather/
Have fun and enjoy your local weather!
Just tried this out a little while ago. Works like a charm. Seems to work on any city that Accuweather.com can find normally.
Good find!
Muppets! It's using my server... just using the old IP method. This won't be working in the next week or two. *scowls*
I suggest using my packages, as they're pretty much guaranteed to stay working, or use your own server as also described on that post. Don't be under the illusion that someone else's server isn't involved here... it is.
Things like this almost make me tempted to take out the old IP method completely before I move...
^ thats ****ED up..! a much eaiser way is also to use HHC by emutz
jakeypoo said:
^ thats ****ED up..! a much eaiser way is also to use HHC by emutz
Click to expand...
Click to collapse
The HHC uses the same method at present. I'll have a word with the HHC guy actually, see if we can do some DLL swapping...
N2A said:
The HHC uses the same method at present. I'll have a word with the HHC guy actually, see if we can do some DLL swapping...
Click to expand...
Click to collapse
Oh oh... I guess that means soon I won't be able to get my local weather!
I hope you guys can straighten this out, I'd like to keep my local weather.
RojasTKD said:
Oh oh... I guess that means soon I won't be able to get my local weather!
I hope you guys can straighten this out, I'd like to keep my local weather.
Click to expand...
Click to collapse
Of course you can, just use the packages like I've been asking people to for months
Just for the record, and just to clean this one up once and for all - you can't do this without using a translation server. Otherwise I wouldn't have had to write the one I did. Of course, there's nothing forcing you to use MY server, people are welcome to run their own, but there's no "easy fix" without one.
Hopefully next time someone "spots" something like this, they'll search and find this.
N2A said:
Of course you can, just use the packages like I've been asking people to for months
Click to expand...
Click to collapse
I tried that originally, but couldn't get it working. I be a Noob, and not a very bright one.
HHC was just so easy to use and gave the option to use custom (your server)or defult weather server.
Hope they come out with a new HHC that will work (fingers crossed).
By the wasy thanks for efforst, it is greatly appreciated.
Hi,
I'm looking for a tool, which allows to execute a program with a command line a certain time of x minutes after docking the device in the cradle or alternatively x minutes after active sync. Does something like this exist?
*bump*
Really nobody got an idea?
Maybe MortScript has such an option ...
sunny127 said:
Maybe MortScript has such an option ...
Click to expand...
Click to collapse
Interesting idea. Maybe someone knows more. Unfortunately, I don't know mortscript myself.
Hi
It would be easy enough to write a desktop application that will fire off an application using RAPI. Have a look at the Opennetcf library.
If your c++ is up to scratch you could also create an Activesync Service Provider (then let me know how you did it).
Regards
Pete
infopete said:
Hi
It would be easy enough to write a desktop application that will fire off an application using RAPI. Have a look at the Opennetcf library.
If your c++ is up to scratch you could also create an Activesync Service Provider (then let me know how you did it).
Regards
Pete
Click to expand...
Click to collapse
Unfortunately I'm not a programmer, so I'm unable to do it myself. Maybe someone else would like to try...
paranoid2007 said:
Unfortunately I'm not a programmer, so I'm unable to do it myself. Maybe someone else would like to try...
Click to expand...
Click to collapse
If enough people ask then I can write this.
Pete
infopete said:
If enough people ask then I can write this.
Pete
Click to expand...
Click to collapse
Does not look as if anyone else has a requirement for this.
Regards
Pete
Has anyone figured out how to get the titan running windows mobile 6.0+ to automatically update the time when you cross timezones. I've done extensive thread searching but couldn't find much that helped. One thread suggested a cab file which would basically change a reg setting that would enable an option to show up in the clock & menu that would enable you to set auto update option for timezone changes. Of course it didn't work.
The other way I read about was changing something in the settings menu( I think it was something in the phone menu). It didn't work either.
So I find it hard to believe that we have all these brilliant programmers here and still no one can figure this out. If anyone has figured this out.. please tell me pleeaseee.
I have been looking for the same thing. I have tried different things without any luck to it would be nice if this would work
sliverr7x said:
I have been looking for the same thing. I have tried different things without any luck to it would be nice if this would work
Click to expand...
Click to collapse
I've had this posted for almost a week and still no one can help.... With all things these programming geniuses can do and no one can fix this..good greif charlie brown!
Smartjunkie007 said:
I've had this posted for almost a week and still no one can help.... With all things these programming geniuses can do and no one can fix this..good greif charlie brown!
Click to expand...
Click to collapse
Yes please someone help. I think NexVision had it figured out. When I ran his iPhone ROM my phone autoupdated the time!!!
Not able to find this littel fella, not in HTCICON.dll not in shellres.dll Anyone know where its hiding? The one in HTCICON.dll does not look like the one I am using out of the box so changing that wount help me. If you got a good tip or a workaround for changing the Today icon on start meny I would be wery intrested to hear about it, cant complete my icon set before I find this last fella.
Using a Tytn II running WM6.1 if thats needed info for some reason.
Edit: I noticed that its the same used in Settings->Personal Today (obiouse) so going to dig from there. If anyone finds this before me please letme know.
Edit2: I found out howto. Case closed (consider this not cheating as I found out on my own )
thanks for sharing...
raiisak said:
Not able to find this littel fella, not in HTCICON.dll not in shellres.dll Anyone know where its hiding? The one in HTCICON.dll does not look like the one I am using out of the box so changing that wount help me. If you got a good tip or a workaround for changing the Today icon on start meny I would be wery intrested to hear about it, cant complete my icon set before I find this last fella.
Using a Tytn II running WM6.1 if thats needed info for some reason.
Edit: I noticed that its the same used in Settings->Personal Today (obiouse) so going to dig from there. If anyone finds this before me please letme know.
Edit2: I found out howto. Case closed (consider this not cheating as I found out on my own )
Click to expand...
Click to collapse
Would you mind sharing with the rest of us how to do this? I'm sure someone else would find this helpful too.
Thank you.
tekknogenius said:
Would you mind sharing with the rest of us how to do this? I'm sure someone else would find this helpful too.
Thank you.
Click to expand...
Click to collapse
Yes ofc, I simply dumped shellres.96.dll
raiisak said:
Yes ofc, I simply dumped shellres.96.dll
Click to expand...
Click to collapse
Thanks!! You just made me a happy man!!!