Hey all I wanted to know if there is a program that will make my Wing vibrate slightly when I dial so I know I pressed the keys. I found this:
http://forum.xda-developers.com/showthread.php?t=269024
but is doesn't work on my wing. Any thoughts out there?
Doesn't works for my LG KS20 too, is there any software to do the same job for vibrating on key pressing like the LG Viewty?
did you set the keypad tone to short under phone settings?
I cannot install it... error message.
I adjusted the reg, its faster and simpler. Did you try that?
MM
MaxMotus said:
I adjusted the reg, its faster and simpler. Did you try that?
MM
Click to expand...
Click to collapse
why don't you just share with him the registry edit then? goodness...
Vibsrating Keys Cab
Here u go ..... just made a cab for it
Its lso included in one of my WM6 Roms
Thanks for the cab, i'm going to try it on my wm6 device.
i see 7 downloads..but no feedback yat..
feedback...;-)
thanks for the cab..i installed it on my tytn 2 and it works fine. there is one flaw (and i am almost sure it has nothing to do with what you did): you can press a key very lightly and produce a number without any vibration..i don't know if this can be prevented, but the problem is: you never have a 100% reliability that no vibe= no key pressed...
maybe its also related to ur touch screen pressures setting..
that sure makes sense...;-)
Have downloaded and used the vibrating keys cab on a 2003se BA. Great. No problems, and thanks!
cab only works intermittantly on a hermes/tytn/8525 device. uninstalled, and no longer get dtmf tones. dtmf is funtional, but i dont hear the tones when i press a number to dial. all i get is a singlr tone for most of the the keys, and another tone for a few of t e others. how do i restore the tones that were produced prior to this cab. Also, would someone share the reg edit that makes the phone vibe on digit press.
Works on Eten M700
Works great on my Eten Glofiish M700 with WM6
you have to make sure that under phone options, its set to short or long tones..if its set to off, you will not ave anything
Thanks for the great CAB
feedback KS20
hi, on my KS20 it works. well have to push the SW button for a while to have vibra-feedback. by fast typing no vibra. is there a poss to change 'vibra delay time' ? rgs thorsten
thorsten06 said:
hi, on my KS20 it works. well have to push the SW button for a while to have vibra-feedback. by fast typing no vibra. is there a poss to change 'vibra delay time' ? rgs thorsten
Click to expand...
Click to collapse
as u may have read on the previous post that its related to ur touch sensivity settings
Here is the Cab that will turnoff the vibrating key pad :
Installed on my htc p360 and it works fine
Thank you, , now , i'm sure to be alerted by any touching pad , as if the phone is in my pocket, and unlock .. ..
please help me.
im new with wm6.
i have a ks20 and dont know how to install this.
Related
Hi every one.
So i set "button lock" and also disable mainly all notifications but every time a new sms arrives,the screen goes on.I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
I been checking every thing i could check but i can´t find the answer about this problem.
Thanks in advance.
Third party software Pocket Zen Phone or phoneAlarm.
Ok i´ll check it and see what i can do.
Cheers mate.
User22 said:
I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
Click to expand...
Click to collapse
There are many occasions the Magician turns on its screen. Rather than trying to find and disable all these, I copied TPDisable.exe and TPEnable.exe from the original Extended ROM into my Program Files folder, and then assigned them to a hardware key (using Hotbutton, so that I can use the same key for both).
As the name implies, TPDisable disables the touchscreen (not the display!), and TPEnable re-enables it. So, before I put my Magician into my pocket, I now disable the touchscreen (one press of a button). That still leaves the keys active, true, but I found that normally the touchscreen is much more likely to be the culprit when strange things happen on your Magician while it's in the pocket, and turned itself on.
Cheers
Daniel
@ tadzio
Well,that is a very interesting solution,but i can´t find TPDisable.exe
or TPEnable.exe inside my magician.I need a bit more info from you
Daniel.
Thanks a lot for your replies.
What happens if you hold down power button for 2 seconds to switch off backlight? Does the light still illuminate on receipt of sms?
@ cruisin-thru
I can´t see the point of your question,mainly because the thing i am looking for is to "switch off" my Qtek like a normal mobile phone,i mince buttons locks and screen off when a new sms or incoming call arrives and when you push power button for example,then screen go on and also release the lock of the buttons.
Any one can say that then i can use deltalock.I did it but the battery live is going down very quick.
Screenlock is not working properly also,i will say that Deltalock is 95% a lot better than Screenlock.
And finally,why microsoft is developing this OS without fully screen off selectable option???. Who knows!!!
Cheers
User22 said:
Well,that is a very interesting solution,but i can´t find TPDisable.exe or TPEnable.exe inside my magician.I need a bit more info from you Daniel.
Click to expand...
Click to collapse
Both programs are in the Extended ROM. Most users have made this visible (though not writable) by performing a Hard Reset, and immediately after completing the initial screen adjustment and mini-tutorial and before the device starts installing programs, a Soft Reset.
If you do not want to do a Hard Reset, search this site's FTP server for Magician Extended ROM downloads. There were a few there last time I looked.
Cheers
Daniel
Well,after config hotbutton to TPDisable and TPEnable i can´t enable the screen and hardware buttons.
TPDisable is disablind the screen but also all the hardware buttons ( with and without button lock at settins),even the power button.
I use same hardware button for TPDisable and TPEnable ,is that correct or i am doing silly things?
If I arrive an sms the screen is switching on and after a few seconds switching off again if I don't press any key or tap the screen!
It's a changeable registry key:
HKEY_LOCAL_MACHINE / System / CurrentControlSet / Control / Power /
WakeupPowerOff =12 (the default is 180)
DisableGwesPowerOff=0 (the default is 1)
If you switch on the Jam (power button) need to press some other key too, because it switches off after 12 seconds!!!
by Avers
@avers
Well that is another solution but i insist that there should be an easiest way to keep the screen fully off when a new sms or what ever arrives,including hardware buttons off ofcourse.
Any suggestion more?, perhaps at the end and betwen all of us ,we can find the solution.
Cheers.
I think the best solution is third party software like PHONEALARM,
it's easiest way to get main tweaks of Pocket Windows.
get it there
http://www.pocketmax.net/phoneAlarm.htm
Well my friends,pocketzenphone is not doing what i am looking for.
Next step is to try phonealarm,but probably will work the same way as pocketzenphone,leting the screen to go on every time a new sms arrives.
Sorry for my languaje but F... microsoft and F... devil gates.
As you can read on this post ,phonealarm IS NOT doing it.
http://www.pocketmax.net/phpbb2/viewtopic.php?t=429
phonealarm has option named "Don't activate backlight on alarm"
ALARM there means any event, that needs notification.
now i am understanding, that it is some differ that you need.
also i advice you make some registry tweaks to make a very short backlite time when sms arrives.:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\WakeupPowerOff = 10
this timeout in seconds. is used when our device self power on, when SMS arrives or we push the POWER button and do nothing anymore
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\DisableGwesPowerOff = 0
this key is enables this power control system (necessarily change it, or first key will not work)
after the editing registry you need to reboot PDA.
sorry for poor english, i translate text from russian.
if you want to use online translator i can give you original URL
_http://forum.ladoshki.com/viewtopic.php?t=16012
Thank you for your reply i will try like you and others point out and also will keep looking for that utopic soft.
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
bnycastro said:
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
Click to expand...
Click to collapse
If you read one of my post ,you will see that i allready said that Deltalock is working but it is KILLING the battery live very fast and when i say VERY FAST it mince that you will get almost 6hours against the normal live (more than 15hours).
Cheers mate.
I think if you keep your ppc on all the time you will get this battery life. Anyway I think deltaLock is for keeping your PPC on and having screen and button lock, not having it in suspend mode and not allowing the screen to power up. Sorry about that, seem to have misunderstood your post.
Don´t worry mate, at the end we are all together trying to find a solution to this microsoft silly programing, any comment and any new idea is wellcome.
Cheers.
faysel, over at the modaco forum has come up with this awesome cab that lets you get vibrating feedback everytime you press one of the number buttons in the phone. The vibration lasts as long (or as short!) as you press the button.
Great cab, very useful for knowing whether you have indeed pressed the key.
This is great, thank you. I used to use Redial with vibrating effect on my PDA2k (WM2003SE) but this is even better
don't expect a long battery life with that! :wink:
acer175 said:
don't expect a long battery life with that! :wink:
Click to expand...
Click to collapse
Are you kidding me? I mean what kind of a battery effect you think it will have? Its such a small vibe that I don't expect to have ANY noticable effect on battery life. First it vibes only when you dial phone numbers (how many a day? 5? 6? even 20? Its still nothing. Second, receiving a phone call, that is the vibration during it, probably uses more power than this addition will use in 20 calls...
I really disagree... :wink:
This is a great little program!
I don't like it because if you tap fast, it wont vibrate. In addition to this, there is a serious problem with the dialer after you uninstall it.
So I had to reinstall it and now i'm stuck with it
My rating : 0 (ZERO)
@Andrew_sh: use the attached cab to get the keytones back, then uncheck from the sounds and notifications settings to get a working silent dialer back.
@Koksie
Thanks for trying but unfortunately it won't fix it.
When I press the button , the tone will sound but if I press it again shortly after, it lags and makes a higher pitched tone.
Sorry to hear it didn't work Andrew, I have no idea how to fix this. I use the vibrate and am happy with it, on my Magician going back with this cab worked fine, I have no idea what is causing this in your Prophet. I hope you can figure it out and correct it, good luck with that.
andrew_sh said:
@Koksie
Thanks for trying but unfortunately it won't fix it.
When I press the button , the tone will sound but if I press it again shortly after, it lags and makes a higher pitched tone.
Click to expand...
Click to collapse
Try this, it's a saved registry string of the original keys that the .cab modified. Hopefully i'll work for you without messing up anything else.
I had to rename the file vibrate off.reg.exe to ba able to attach it. Just delete the .exe part ie. vibrate off.reg
this is a technical forum
can someone paste here the registry keys which are being modified by this vibrate utility?
thanks
Using a registry editor navigate to the following keys and follow the directions. Do this for each of the listed registy keys
1. Rename Standard DWORD parameter "Sound" to "Sound1"
2. Create new String Parameter "Sound"
3. Assign value *vibrate* to this new parameter.
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf#
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf*
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf0
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf1
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf2
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf3
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf4
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf5
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf6
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf7
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf8
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf9
this mod doesn't work fine for me, I noticed the vibrate a few time but it's not working everytime I tap on the Keypad...
Strange :?
Although the mod works fine, I had big troubles removing it again.
After removing the mod with the supplied cab file any keys pressed in the dialer would lag and emmit a short beep.
i finally succeeded in removing it manually:
First reinstall the vibrate mod again so that the keys vibrated again when pressed.
Then go into the registery keys posted above, deleted the parameter "Sound" and then rename the parameter "Sound1" back to "Sound".
Do this for all Dtmf keys.
Thats all
its true if you tap fast it wont vibrate at all.. very annoying. is there a way to make it vibrate for a set lenght.. much like the dtmf tones used to be.. no matter how long or short i press..
that would be very useful.
regards,
tom
bk227865 said:
Although the mod works fine, I had big troubles removing it again.
After removing the mod with the supplied cab file any keys pressed in the dialer would lag and emmit a short beep.
i finally succeeded in removing it manually:
First reinstall the vibrate mod again so that the keys vibrated again when pressed.
Then go into the registery keys posted above, deleted the parameter "Sound" and then rename the parameter "Sound1" back to "Sound".
Do this for all Dtmf keys.
Thats all
Click to expand...
Click to collapse
I used this mod until I found out that I couldn't turn off vibrate on incoming calls anymore. I can't be sure that they are related, but the timing was right. The next time I did a ROM upgrade I didn't install it again. I use speed dial with Photo Contacts Pro anyway.
krale said:
faysel, over at the modaco forum has come up with this awesome cab that lets you get vibrating feedback everytime you press one of the number buttons in the phone. The vibration lasts as long (or as short!) as you press the button.
Great cab, very useful for knowing whether you have indeed pressed the key.
Click to expand...
Click to collapse
Never mind - problem fixed
Not installing on Tytn / Black2.5
"Installation unsuccesfull, Not meant for this device"
Did anybody have more luck? How?
I don't like this
...the vibrate just doesn't trigger some of the time, which means you can't rely on tactile feedback on dialling, which makes it fairly useless. Sorry...
buhahahaha
*buzz* *buzz* *buzz*
works fine on my Jamin. Great app
Hi all,
Looks like my T-Mobile MDA Vario II is heading the way of the D-Pad/White Screen ribbon failure (http://forum.xda-developers.com/showthread.php?t=321163) but as I've not yet got the white screen, and the problem is intermittent I wanted to ask a software question first before I broke out the screwdrivers.
Is there an easy way to change the soft key actions during a incoming call, so that I can click on the screen instead of the answer hardware key to answer a call reliably?
From reading around it may be that this is locked to the particular dialer as none of the key config tools seem to allow you to change these temporary soft key items?
At the moment I'm running Schaps 4.30 ROM which I've found very stable and feature packed, but when there's an incoming call the soft keys change to 'Silence' and 'Send Text' neither of which are as important to me as 'Answer' and 'Reject' which is what I'd like on there.
If it is a case that these soft keys can't be changed via the registry does anyone know of a WM6-6.1 ROM or Dialer that does have the options I need?
Many thanks in advance for any help!
I'm pretty sure my ROM does the 'Answer' and 'Reject' soft keys... I'm pretty sure that's the default too... If Schaps has something different, then I think he changed it away from the default to what he has...
Many thanks now on latest CRC 6.1 Stable
Hi CRC,
Many thanks for your quick reply, flashed to your latest WM 6.1 Stable ROM last night and can confirm Accept/Reject Softkeys on answer are present and work great!
ROM also feels smoking fast, so will leave it as is for a week or so and then might move to your development ROM to help give feedback and squash bugs.
Obviously your ROMs are very clean so looks like I'll start heading off to find all those Cabs like 6 button Home, Big Start Menu and Audio Manager that make life that little bit more thumb friendly.
Really appreciate the work you do getting the engine tuned so well! (You should get a small donation come through soon.)
Alan
(Now I can wait until IE opening whenever a new txt comes in finally drives me mad enough to crack the case and try to fix the ribbon cable!)
Hi,
I've owned the Xperia for a week and it's a great WinMo device. However unlike Touch Pro or Diamond, there's no registry tweak available to turn off the auto wake up on new sms feature.
I found it really annoying. Everytime a new SMS arrived when the phone was in my pocket the screen automatically turned on, and as I was walking my jeans' pocket continuously "touched" on the phone screen and accidentally opened bunches of programs and scroll up and down until it hanged.
It will be perfect to just make sound + vibrate, but keep the screen off, as I could do on Touch Pro.
Anyone knows of such a solution please do help!
I need to bump on that...
hmmmmmmmmmmmmmm
aint advanced config 3.3 working for that?
I was having this problem too... the only thing I changed to attempt to fix this was instead of pressing the power button to sleep the phone before I put it into my pocket, I press and hold the end key so that it locks the phone and dims the screen. The screen eventually turns off and it requires you to unlock the phone when you power it back on. When you receive an SMS or Email, the screen still lights up, but you have to press unlock, then tap unlock to start using it.
Yes, I have the same problem too and hope we can have the option to turn it off so that the screen will not lighted up when there is new sms or call.
Can someone work on this?
The registry key used for the tweak that works on Touch Pro does not exist, which is HKLM\Drivers\BuiltIn\RIL
smaberg said:
aint advanced config 3.3 working for that?
Click to expand...
Click to collapse
That option is for Touch Diamond and Touch Pro only, and it does not show on Xperia when you use Advanced Config. It's obviously related to the registry key mentioned above.
I have found the solution, just need to use any registry editor like the Resco Registry Explorer or the SKTools to edit the registry.
Dont want the device to wake up on new SMS ?
It still notifies you with sound/vibrate/LEDs, but the screen will not turn ON
Just add in the below line into the registry location :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
Has anyone tried this out to see if it works...???
Cheers
SE-Naz said:
Has anyone tried this out to see if it works...???
Cheers
Click to expand...
Click to collapse
I have tried it myself and it works, I don't have to worry that I might press anything on the screen when there is incoming SMS.
Thanks for getting back to me...
I was having this problem... when in my pcoket and getting tx message and the opt pad going all over the screen... kinda funny...
Im assuming when updating this key will be deleted and have to be put in again???
Thanks
SE-Naz said:
Thanks for getting back to me...
I was having this problem... when in my pcoket and getting tx message and the opt pad going all over the screen... kinda funny...
Im assuming when updating this key will be deleted and have to be put in again???
Thanks
Click to expand...
Click to collapse
Not sure about yours but I do not have this key so I have to create a new one and it is working.
I need to create it...
Does it need to be where the
HKCR
HKCU
HKLM
are???
Cheers
Sorted now and working well...
Thanks again
Put it in HKLM.
However Resco registry give me an error and doesn't create this dword. Very very strange...
chongbh said:
I have found the solution, just need to use any registry editor like the Resco Registry Explorer or the SKTools to edit the registry.
Dont want the device to wake up on new SMS ?
It still notifies you with sound/vibrate/LEDs, but the screen will not turn ON
Just add in the below line into the registry location :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
Click to expand...
Click to collapse
am i being bold for asking a step by step.
i have total commander and i am in registry\HKLM\
and then.....
thanks for the help.
Just added this feature in my application XperiaTweak!
hutch said:
am i being bold for asking a step by step.
i have total commander and i am in registry\HKLM\
and then.....
thanks for the help.
Click to expand...
Click to collapse
Using your Registry Explorer an go to the below location :
Location in Registry : HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL
Select "New" D_Word and you will be asked to enter the details :
Top portion just enter : DisableSMSWakeUpEvent
and bottom portion just enter the value : 1
Save it and you should find the details there :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
For easier way, you can download the latest Xperia Tweak and it include the option to turn off the screen for any incoming sms.
http://forum.xda-developers.com/showthread.php?t=440035
Confirmed Work!
I can confirm this solution works perfectly! I thought if the value does not exist means the device does not support it. Thanks chongbh!
there is a problem with WM6.5 roms lock slider:
if a call comes in & the lock is active but the phone is in suspend (power off or manually pressed the power button) the call will show "unknown caller"
you will not see the name until you answer od then you can see it later as missed call
this is annoying as you can not screen the calls & answer/ignore the ones you like
the slider lock will show the name only if the sceen has not turned off yet (did not enter suspend mode yet)
is there any fix out there?
I am thinking if someone knows how to make the screen light dim firest the turn off only (without power off / suspend) then it will work
anyone has a registry tweak to just turn screen off & leave the ppc running without suspend?
or any other fix????
i like to use the wm6.5 lock, i know i can use S2U2 but i prefer this one & hope we can fix it
thanks
Same issue !
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
HTC phone canvas is first to present ID caller then in communication WM6.5 lock is activate by Suspend mode in communication... because Chobit Smartlock is in use... other i have the same issue like You...
unknown caller with WM6.5 lock when it s suspend mode...
i agree, if anybody knows how to solve this problem... i buy it !
lesscro said:
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
Click to expand...
Click to collapse
hmm i couldn't get the smartlock to work for me on my xperia
i used CsDevCtrl and it's sorta working... it auto locks my device if the backlight turns off or if i manually put it in suspend mode *power off button* and locks on wake up.... has a bunch of features i'd never use so it's a bit more complex than i'd like. but even with that auto lock i still get the unknown caller... i'll have to read more about htc phone canvas.. i'm not really liking the xperia dialer anyway... never have...
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
again tho.. these problems might just because it's not the offical build yet... these problems may be worked out with an offical release... nothing i can't live with at the momemnt
so i still have no luck with this unknown caller ID issue
i am sure someone knows the registry tweak..as many programs just use screen off
for example media player as you can play music while screen is off
or S2U2 can lock / turn off screen but leave phone working unsuspended
please help
Thanks
I've noticed this also but if you use a dialer that has its own slide to unlock then it tends to work fine..at least for me anyway..
It does take about 2 seconds for it to go from unknown caller to who it actually is though..
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Hmmm, after showing Unknown for the Caller ID this morning, now the caller ID is showing up on wake. Strange. Only thing I have done was install the sdkcerts cab. I'll test further.
no caller id in tmobile wing after installing s2u2 1.62
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
killerskincanoe said:
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
Click to expand...
Click to collapse
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
ekksman said:
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Click to expand...
Click to collapse
Thankssssssssssssss
that trick worked with my phone
the fix was simple & there the whole time and i did not know...
its good...not perfect (should work by itself) but at least now i know who is calling
again thanks for your input
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
thanks, but i checked my registry
& i do not have callidMatch at all there???
aa125690 said:
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
Click to expand...
Click to collapse
i have eten rom build 21501 & on other phone 21510 and both have same problem
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
I tested this out, no help. But the power button trick works...hmmm. I wonder what's going on and why this works?
21501 and same problem on
htc titan.
AWESOME! thx you!
ahmedfikry said:
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
Click to expand...
Click to collapse
DUUUUUDE... haha thx!
u got right on that.. i'll download and give it a try.
although i haven't yet had the chance to check since my latest ROM update if it was just the rom or 6.5... but i'll test and reply with results THX AGAIN!
p.s. i wonder if above mentioned power button trick will work with my alarm situation on the lock screen.. willl also investigate!
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
killerskincanoe said:
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
Click to expand...
Click to collapse
Yes. I notice that the cuts happen when the video plays (the small arrows to the left and right of the slider) Once that times out, the music is contiuous.
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
Thanks!! this worked for me. Using "Udk WM6.5 BETA2 21500 - base v2.04" (device= Touch Diamond)