Database Users

3300 dont start anymore

ive got a htp 3300 from movistar spain and i allready got it unlocked, yesterday i put the wm6 english on it and today y tried to put
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap, now
i can see only the white htc screen
IPL 3.007.001
SPL 3.07.0000
GSM 02.69.90
OS 1.28.0.0
the phone dont start anymore
y need helpe please

Can you get in to the bootloader?
If you do then you can put an original rom back. If you don't then send it to the service.
An unlocked device is out of warranty so be prepared to pay for the service.
Go to wiki of Artemis there you can find the method to get in to the bootloader.
Goof luck! << you need that.

you meen push the record button and reset in the same time???
i tried this befor but never go in bootloader modus maybe i make something wrong pleas help me

As of this http://forum.xda-developers.com/showthread.php?t=308242#1 threath of meschle states your device is a brik.
I'm sorry to tell you that.
meschle said:
Do Not flash your Artemis with a different carrier/cooked Rom without cid unlocking
--------------------------------------------------------------------------------
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112...0_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219...0_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rapidshare.com/files/46377862....90_Shi p.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Click to expand...
Click to collapse

movilstore said:
ive got a htp 3300 from movistar spain and i allready got it unlocked, yesterday i put the wm6 english on it and today y tried to put
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap, now
i can see only the white htc screen
IPL 3.007.001
SPL 3.07.0000
GSM 02.69.90
OS 1.28.0.0
the phone dont start anymore
y need helpe please
Click to expand...
Click to collapse
i had the same problem and took me 3 days to fix it. so maybe this will work for you too !
first take out the battery for 30 min then push the reset button and put the battery back and turn on the device. if this not working. try to start bootloader by pressing and holding the record button and on/off button and push the reset butoon in the same time but keep pressing the record button and on/off button till a colored screen shows up??? sometimes it doesn't appear at the first time so just keep trying .
if you have bootloader you can reflash a rom. but you need to format your memorystick first to fat on your pc then put the image rom (nbh file) and rename it to Arteimg.nbh !! i used OrbitO2UK image.

My wizard died

Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english

which is your device,post full data of your phone,IPL/SPL...? Make...?
As you say you installed through Shelltool,is it a G4 DOC chip version ?
You say it's stuck at the splash screen with ipl/spl and gsm version,which splash screen,is it OS (Rom) initial splash screen or a Bootloaders (Multicolored) screen ?
Secondly ,try to get it into bootloaders (multicolor) screen,if it gets into bootloaders,connect it to PC via usb cable,check small usb appears at the bottom of the bootloader mode in the phone,if it does,than flash a carrier's official Rom to recover back to it's default status.
Good luck

Try the Button's ROM (which is in Wizard Upgrading subforum). Then unlock it again (It may be causd by a fake CID unlock when you try to unlock when IPL/SPL is 2.xx)

My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.

alldoe said:
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
Click to expand...
Click to collapse
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.

luoluomeng said:
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
Click to expand...
Click to collapse
Hello! I have CID unlocked. When I install Button ROM my IPL and SPL is the same (1.01). Every RUU works but It still frozen. 2 Days ago i found on other forum this advice:
INSTRUCTION :
1. miniSD - formated in PC - FAT format (now FAT32 !)
2. Wizard On and Bootloader (press reset and keep photo button let go reset) 3 color display. Put in card to Wizard.
3. Connect USB - PCC to PC
4. Launch MTTY 1.42 (my ver.) with USB connection
5. Write command - r2sd os end press enter
6. Program it will record OS on miniSD
7. After recording make Hard Reset or turn on Bootloader
8. On Display should be written - Format partition ?? (5 sec.) - to confirm press Voice dial button. If inscription it will disappear repeat point 7.
9. If Format partition successful wait OS is write. Done.
10. Draw out miniSD
11. Make Hard Reset
12. Enter in bootloader
13. FOR NON CID WIZARD - Flashing Wizard RUU (must be proper version) - ERROR 300 is bad RUU ERROR 266 turn off Wizard and turn on connect to PC
14. With CID (for example CID G4) seek forum for flashing Wizard with CID G4
My Wizard it lives
Click to expand...
Click to collapse
I was carry out all command step by step, and after flashing proper version Orange ROM my Wizard woken up, but today my Wizard get stuck again and now this way don't work, and I have to find a new method to rescue my PDA.

My Wizard woke up! I find ERA PL ROM (RUU_Prodigy_3829_382130_027111_TMO_PL_PLK_Ship) which flash excellent and working, but now I have a new problem. I can install other ROM after that but none of them work, every stucked at Splashscreen like before.I need to find some WM6 ROM which will working? Someone have some suggestion?

alldoe said:
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
Click to expand...
Click to collapse
i have the same proplem but i have a g4 wizard and it's not cidlocked tell me plz what to do plzzzzzzzzzzzz :'(

Rom downgrade

I've to send my Trinity to warranty, but my trinity came a with a Portuguese Vodafone rom, i've downgrade to HTC WM5 portuguese, but couldnt install vodafone rom, i've extracted the installer and run Des SPL but the vodafone rom don't load in boot loader mode.
I've changed roms with diferent RUU but no sucess, but i'm afraid to brick my phone, my problem its only battery.
Any sugestions?
Thanks in advance

Hi.
Thats the same affraid I have before put WM6 on mine, and it's Vodafone PT too.
Did you solve the problem?
Just for test, I try a few days ago to put the Vodafone Rom again, the first part goes well but after that, the program gives an error.
I was scared but after restart the phone, the WM5 was installed again, but no Vodafone logo or else, because I think the 2nd part was the network customization.
Any advice?

Is my qtek 9100 crashed?

Hi, i tried to install touchflo on my pda phone but the instalation failed. And now everytime i try to install a custom rom or anouther rom for example: button's 1.05 ROM. The instalation totaly completes but when my phone restarts it´s gets stuck at the boot screen with the picture on a beer and the ipl/spl 1.01 shows up and there its stuck, i dont come in to windows. i have followed these guides: http://forum.xda-developers.com/showthread.php?t=298613 and http://forum.xda-developers.com/showthread.php?t=285435
But with some roms the instalation stops at 98% and a error message cames up and it says: "error 326: this NBF file can not be used for your PDA phone, please check your NBF file"
And when i try to hard reset it says: "format FAT partition and format is failed"
pleeease help me what scould i do to get my phone back to normal again?
sincerly yours// Johan

When its on the beer bootscreen, give it time. The button rom (i find) is real slow but works for what we use it for

Is your phone CID unlocked ? try to get the phone in bootloaders mode (multicolor Screen) and either flash the button's rom 1.05 or official stock rom of your carrier to recover back to default working status and download the WST tool and verify the SIM/CID lock/unlock status of the phone.If you have inserted any sdcard or mini sd card remove it before flashing.
Cheers!

skezza said:
When its on the beer bootscreen, give it time. The button rom (i find) is real slow but works for what we use it for
Click to expand...
Click to collapse
no, i have waited for 10 hours but its still stuck

zabardast_1 said:
Is your phone CID unlocked ? try to get the phone in bootloaders mode (multicolor Screen) and either flash the button's rom 1.05 or official stock rom of your carrier to recover back to default working status and download the WST tool and verify the SIM/CID lock/unlock status of the phone.If you have inserted any sdcard or mini sd card remove it before flashing.
Cheers!
Click to expand...
Click to collapse
yes i have CID unlocked it one time. but when i get the phone in the 3 colored screen but when i flash de buttons rom 1.05 and complete the instalation i get stuck in the beer screen there i can see ipl/spl 1.01 i dont came in to windows and i must come in to windows to rerun the CID unlocking or can i do that by the 3 colored screen?
pleease help me
cheers!

Got the same Problem, any ideas?
Hi Ashtrays,
could you solve your problem?
I got the same one: Flashed my MDA with a new ROM, and after a complete installation it gets stuck at the splash screen.
I flashed back to Buttons 1.05 ROM but still got the same problem: A nice beer glas and the info about IPL/SPL 1.01 and nothing more happens.
So have you solved your problem? Maybe you can help me out...
thanks
Henning

Do a Soft reset or Hard Reset,it shud work,otherwise reflash the Rom.

SPV M600 freeeze

hi,
I recently buy a SPV M600 and this was working fine! When a try unlock that for put a difrent company sim that never start up again! Now the item freeze on first screen, where that show the IPL,SPL,OS and GSM versions!
Anyone have solution for this problem? I try update the rom, for a RUU but the problem still .
Best regards
gats

Have you tried a Hard Reset? (Hold the Comm Manager button and the Camera button and soft reset)

yes, i try a hard reset, phone restart and freeze again!!
I think about it , and the phone are Sim locked and CID locked, is for that reason he freeze?

Is it a G3 device or a G4 device?
The SIM Lock shouldn't cause this, but try taking the SIM out and seeing what happens.

is a G4 model.
Sim card was always out, because it isn't unlock to put my sim.
Nobody can hep me? I upgrade the rom for the original of orange in same language but the phone continue freezing at start!
I don't no what i can do more!

Normally, you should SIM unlock before flashing the ROM...
What brand is the device?

I think i found the problem! I didn't flash the rom before updating and didn't unlock CID. I am thinking now, how to repair the phone now!
So, the phone are sim locked and CID locked, i ll CID unlocking with hardspl, but i ll not can copying the necessery files into pda directory, like this said on "Rom flashing for dummies" on Wiki!! So can i flashing the rom from BootLoader?
The phone is in used condition, but it all functionally becuase i work with that before update the rom and have this problem!
Best Regards
Gats

If it's in/can get to bootloader, it should be possible to flash a WM5 NVID ROM. from there, you can HardSPL, SIM unlo ck and then flash a New ROM.

If it's in/can get to bootloader, it should be possible to flash a WM5 NVID ROM. from there, you can HardSPL, SIM unlo c
ck and then flash a New ROM.