External gps or miniusb adapter ? - Tilt, TyTN II, MDA Vario III Accessories

I just got my hands on a rds / tmc reciever from tomtom. It has a connector which is on the tomtom go's. I was wondering if it is possible to connect this to my kaiser by an adapter. I also was wondering if anyone could tell me what type of connector the external gps port is and what type of port is on the go? Perhaps I can make my own adapter but I need to know what type of port it is.

Kaiser already have the built in GPS?
Why you want to built the adaptor for??
I do not understand what you asking here....

It's a TMC rds reciever from tomtom. It will update any traffic jams and mobile speedcams. It would be great if I get it working on the kaiser. It seems that the coax connector in the kaiser is a MS-147-C(LP)-2 connector. The tomtom tmc module has some sort of a 2,5 mm jack connector but with a metal ring around it. I can't find the name of the connector anywhere. But I'm sure if I can find out the names it would be possible with navigon to update traffic on route.

yes, i'd also like to know what kind of connector is on the AT&T Tilt/kaiser. i bought an external gps antenna for better signal, and thoght id figured out that it uses the MMCX style connection, but after receiving it from Ebay, it does not fit. Now i ned to find an adaptor to got from MMCX to Tilt GPS external connector, or splice a new correct end onto my external antenna.
Shaggy

The port on the Kaiser is only a connection for an external GPS antenna. The Tomtom RDS device uses a proprietary data interface that doesn't carry the same kind of signals at all. You won't be able to connect it to the Kaiser.

I found the MS-147 connector at HighRose corp, but they want $25.00 US for that tiny little connector. I only paid $12.00 for my ext gps antenna. So, I'm trying to go the sample route for a free connector. Said they were gonna ship it this March. Long time to wait for it, but better than paying that crazy amout for such a tiny connector. I could machine a one'sy order like that on the lathe at work for way less $$$ than that. And they are prolly running them on a CNC Screw Machine, pumping out 1 part every 3 to 10 seconds. Uggghhh.
Shaggy

This just isn't going to work, stop trying and either give the RDS/TMC receiver to someone who has a compatible TomTom or put it on eBay. believe me this won't work....

Just buy Garmin Mobile XT for your Tilt. It has traffic updates.

Related

why does it take so long to get gps-signal?

hey guys,
i have a little question,
i just bought a haicom gps receiver and use tomtom 2 software. When i get out of my garage, it takes always more than 15 minutes to get a signal. sometimes during driving i also lose it. How comes?
when i connect my device to the receiver and power, i get something like "connecting to t-mobile MMS"...
oh, btw i have a MDA II with latest NL t-mobile rom. 1.60....
if anyone could help please...
thanks!
The gps should only take this long when first used, after that it should lock in a matter of a couple of minutes, to test the gps properly it is best to test it outside the vehicle, I think most Haicom mouse gps come with magnetic base so stick it on the roof and drive around, if it works better it is probably becuase your car has a metallised windscreen which blocks the signal. The message about connecting to the service provider is an error due to the com port being accessed i think, mine used to bring up activesync every time but once I canged my activesync settings on the xda to manual instead of auto sync it solved the problem.
so i should always drive around with my window open?? and stick the receiver outside the car?
I would agree with Crusin Through - I think your car may well have some form of heated windscreen or heat reflecting windscreen. What car do you have.
If when you do place the receiver on the outside of the car you do get good signal you can get a special anntenna that had an outside part and an internal part that you can fit permanently to the car so you can still move the thing about. Bit like a mobile phone antenna.
Alternatively as you have the XDA II you can get a bluetooth receiver an place it on the rear parcel shelf (I think the wider heating strips won't affect it - but can't confirm it.)
John, I wasnt suggesting you drive around with your window open, I was suggesting a way to ascertain if your windscreen is the problem regarding your blocked gps signal, by the way I have used a gps on the roof and the window will shut almost all the way however as the last post mentioned you can obtain a re-radiating antenna, this will solve your problem if indeed the windscreen is the culprit.
Re-rediating antenna - that's the word I couldn't remember :lol:
ok guys, thanks. i'll try with such an extern antenna.
thanks for your help
Before you spend your money on the re-rad antenna - try the thing on the roof - if this works then the antenna is your only real option if you want to continue with the thing in the front windscreen.
I'd hate you to buy the re-rad and then find it doesn't work.
Incidently what car do you have? (Does it have a heat reflecting or headted windscreen)
And if it works outside,
you still don't have to buy an external antenna, as normally the windshield have an area where is not metal coating...
try to check the manual of your car..
i own a toyota Camry 2002 model, it has indeed a windscreen etc...

connection - non bluetooth question/search for leads

bear with me on this one while I try to explain...
I have an o2 XDA Exec that has tomtom 6 on it
I want to use the phone/sat nav, while on my bike
I have got a Starcom Advance - http://www.starcom1.com/ that is all working on the bike
Now, I do not want to use bluetooth if I can avoid it....
The starcom has a seperate connector for the phone and for satnav. (Both 3.5mm jacks)
I think that if I can find a 3.5 mm double male lead then I am hoping I can just plug it into the xda and the starcom - but what lead do I need? (Needs to allow the microphone to work btw)
I am hoping that some kind person knows what lead is needed so I can source one from maplins etc.... or that it just will not work!
I have the same problem! I use the Intraride system, but it's exactly the same set-up as the StarCom (used to have one) The solution I found was something like the Ericsson bluetooth handsfrees. They come with a detachable earpiece, so you can connect the units to the intercom using the phonelead that should have been supplied in the intercoms box.
First option is the HBH-20, there is one on ebay now for next to nothing.
HBH-20 Ebay Clicky
I then tried the HBH-200, which is similar, but includes a CallerID function. Nothing on ebay, but here is a link so you can see what I mean:
Clicky
Both devices are the size of a box of matches, so no troubles there! What I did find is that both units can be querky with the bluetooth connection, (down to the phone not the handsfree and this was on the OE o2 ROM, and one of the cooked WM6 versions) and also the volume was a bit quiet. Solution I've gone with now, is to swap my SIM into a normal phone (Nokia 6310i and universal adapter) and just plug that in. I also had good results with the Motorola V50 which has a 2.5mm connection that will just plug straight in.
Hope you find something that works for you! Although if anyone knows of an adapter to allow normal 2.5mm handsfrees to be connected to the 3.5mm socket on the universal...I'd love to know too! I have already looked at the adapters from Expansys, but these only allow PC type headsets to be connected (ie those with a separate 3.5mm headset and earphone lead)
Steve

GPS internal

I know this has been up before but I´m still confused.
On this site http://cnn.cn/shop/htc-tytn-c-277_279.html
they sell antenna for the hermes gps.
As we know Hermes has an internal gps but without the internal antenna that is necessary...
So has anyone installed such hardware?
It would certainly be interesting to know if with the external antenna the GPS would work. Looking at it I think it might, the only problem I can think of would be the device recognising the GPS. Great find!! Good on you!!
strandkanten2 said:
On this site http://cnn.cn/shop/htc-tytn-c-277_279.html
they sell antenna for the hermes gps.
Click to expand...
Click to collapse
Looking at the product page on this antenna there are som pictures with it installed.
It attaches to the connector behind the rubber protector next to the camera.
Is'nt this the connector for external radio antenna?
Or is there any smart electronics that connects this connector to the internal gps module?
mippen said:
Looking at the product page on this antenna there are som pictures with it installed.
It attaches to the connector behind the rubber protector next to the camera.
Is'nt this the connector for external radio antenna?
Or is there any smart electronics that connects this connector to the internal gps module?
Click to expand...
Click to collapse
I wondered the same thing.
This has been discussed to death so many times. Most recently, this exact antenna was discussed in the Hermes Accessories section of this forum (use search, I'm not going to do it for you).
Here's the FACTS!
1) There is some of the circuitry (hardware) for a GPS in a hermes. Some is missing. This is most likely due to the chips that the hermes uses having multiple built in functions. One function was needed so they used a chip that just happened to have part of a gps built in.
2) Adding the rest of the gps harware isn't practical and has a 99.9% chance of destroying the device even if you are highly experienced in working with surface mount components.
3) Even if you added the antenna, etc. successfully there is no firmware to drive it. You still need to write everything from scratch and make the firmware work with the rest of the pda/phone. You would have to do this without benefit of having any existing source code for the pda. Good Luck
4) Assuming you managed to do all this, and plugged in this antenna, you would have a gps that needed this big ugly antenna wired to the phone. So why not just spend the $50 and buy a bluetooth gps that works without wires and doesn't need the phone modified?
5) The store selling this antenna have stated to queries (see other threads) that this antenna is for use when using an EXTERNAL gps with the hermes. In other words, some bluetooth and wired gps units that work with the hermes have an external antenna jack so that if they are used in poor conditions this antenna can be used to boost the range by placing the antenna outside the vehicle, etc.
6) You cannot use this antenna plugged into the hermes external antenna jack. it will probably destroy the phones radio instantly and permanently. In fact, its a very bad idea to use any external antenna with any radio that wasn't specifically designed for the radio. There are many reports of frying the radio by using 'universal' cell phone antennas.
In conclusion.... GIVE IT UP!
There is no usable gps in the hermes!
deach01 said:
.
In conclusion.... GIVE IT UP!
There is no usable gps in the hermes!
Click to expand...
Click to collapse
ok then, anyhow very misleading pictures on that site then.
why would i install a wire to my phone if i have gps on bluetooth. makes no sense.
Ps. I knew this was discussed earlier but I wanted uptade on if someone tried it recently.
strandkanten2 said:
ok then, anyhow very misleading pictures on that site then.
why would i install a wire to my phone if i have gps on bluetooth. makes no sense.
Ps. I knew this was discussed earlier but I wanted uptade on if someone tried it recently.
Click to expand...
Click to collapse
deach01 is correct. I agree the people selling this antenna should make it MUCH clearer as to its purpose.
To the best of my knowledge all development work has stopped, on getting the partial GPS functionality of the chip to work on the Hermes for the reasons deach01 states - it's just not practcal, and as said already the bluetooth receivers work well without major surgery to the Hermes.
Mike
Total BS! That site actually shows a picture of that antenna plugged into the back of the Hermes, talk about misleading!
deach01 said:
This has been discussed to death so many times. Most recently, this exact antenna was discussed in the Hermes Accessories section of this forum (use search, I'm not going to do it for you).
Here's the FACTS!
1) There is some of the circuitry (hardware) for a GPS in a hermes. Some is missing. This is most likely due to the chips that the hermes uses having multiple built in functions. One function was needed so they used a chip that just happened to have part of a gps built in.
2) Adding the rest of the gps harware isn't practical and has a 99.9% chance of destroying the device even if you are highly experienced in working with surface mount components.
3) Even if you added the antenna, etc. successfully there is no firmware to drive it. You still need to write everything from scratch and make the firmware work with the rest of the pda/phone. You would have to do this without benefit of having any existing source code for the pda. Good Luck
4) Assuming you managed to do all this, and plugged in this antenna, you would have a gps that needed this big ugly antenna wired to the phone. So why not just spend the $50 and buy a bluetooth gps that works without wires and doesn't need the phone modified?
5) The store selling this antenna have stated to queries (see other threads) that this antenna is for use when using an EXTERNAL gps with the hermes. In other words, some bluetooth and wired gps units that work with the hermes have an external antenna jack so that if they are used in poor conditions this antenna can be used to boost the range by placing the antenna outside the vehicle, etc.
6) You cannot use this antenna plugged into the hermes external antenna jack. it will probably destroy the phones radio instantly and permanently. In fact, its a very bad idea to use any external antenna with any radio that wasn't specifically designed for the radio. There are many reports of frying the radio by using 'universal' cell phone antennas.
In conclusion.... GIVE IT UP!
There is no usable gps in the hermes!
Click to expand...
Click to collapse
If they used a chip and it had GPS as a bonus and they just ignored it, why then would the go through the troubleb of adding an external antennal connection and mod the device housing to accomandate it?
The external antenna connection is NOT for GPS. Its for the cell phone radio.
Don't believe me?
Go ahead, plug in an antenna!
Hope you can communicate by smoke signals as your cell radio transmitter final amplifier toasts itself.
THERE IS NO WORKING GPS IN A HERMES!
Do you really think that HTC would build in a feature like GPS and NOT market it?
An expensive option, Kaiser!
An expensive option is to go for Kaiser(soon to be at&t 8925 ?)
Does anyone know for sure that at&t is NOT gonna kill GPS on Kaiser? Just heard today it has pass thru FCC (
http://gizmodo.com/gadgets/windows-mobile/-283367.php )
As soon as the Kaiser comes out over here I'm going to get one, it's like the WM version of the N95.

Gps Antenna Is On Sale At Cnn.com!!

what is this about, if gps is not working, why do they sell it::
http://cnn.cn/shop/8525tytnhermes-antenna-p-1615.html
ya, this doesn't make much sense.
Looks to me like a TYPO that should read GPRS or external antenna for car with the connector on the cable. BUT it would get a few buying it first and finding the mistake afterwards wouldn't it!
Yeah, it won't work although it is a GPS booster. I use the same make with my tomtom. It would only help plugging it into a GPS receiver that in turn is connected to the TyTn by cable or bluetooth - not as they show it directly to the Hermes.
Mike

Somebody know what it is?

Maybe an antenna connector? For the GPS? It is located above the upper right corner of the battery
I think that is an GSM connector
someone in another forum identified it as a MMCX socket, indicating it was for a GPS antenna,
he also posted a link to an auxiliary GPS antenna with the mmcx connector, looked just like the GPS antennas we used to buy for the mapping programs that ran on our laptops, or the auxiliary antennas available for the dash mounted GPS units
I think it's an internal antenna (don't think it's GPS), had the same on my Omnia II. Some people thought it was the reset button and ended up messing up their devices badly.
it's a connector for external antenna. which one I'm not sure, could be WIFI, GPS, FM.
commonly use for lab measurements.
Ok, thank you... we must to investigate
Bump, just noticed this..... It certainly looks like a MMCX socket. maybe we can boost wifi/fm/gsm signal by adding external antenna? We could use some thin wire and lead it around the battery..
I have a sirius satellite radio antennae with the same connector. I'm not going to plug it in though, for fear of shorting something out...
It's a connector for GSM external antenna.
You could measure resistance with multimeter...
Its quite risky, since there is no information about this connector.
xan said:
You could measure resistance with multimeter...
Its quite risky, since there is no information about this connector.
Click to expand...
Click to collapse
Or you could use a oscilloscope. and it would be safe
meybe could work like that
http://blog.wpsantennas.com/2007/05/samsung-blackjack-i607-external-antenna.html
http://www.wpsantennas.com/359921-samsung-captivate-galaxy-s-antenna-adapter-cable.aspx
Its a GSM external antennae plug for people with car kits. Use mainly by country people as they need it due to distance or professional drivers like truckers. I find it odd as you would need a modded back cover when using it. I WONDER if you can improve reception of GPS/GSM if you make a backcase out of required material

Categories

Resources