hi guys i just got myself a xda 2s and i am in midst of upgrading to wm6 when i encountered a prob. when i try to go into bootloader i only see the word serial
and v. 2.07. i do not see any coloured screen? what am i doing wrong? pls help
now put it in cradle and run the upgrade utility
You are doing OK, but read WiKi in details before proceeding.
i read wiki but was not too sure lol thanks for help!
btw sorry for the double posting!
Related
Hello,
I know, i am not the first one with this problem and i read many threads but i am not clearly understand the way (if there is a way) to fix my problem.
After updating my german xda Device i restarted and have been promped to enter my Pin, but the screen is frozen. So i did first a soft and after this a hard reset. Now after every hard reset i see the the O2-bubbles for some minutes and then the white screen with the blue bar on the top. Nothing is working.
I i wait for 10 or 20 Minuten the bubbles coming back - same game everytime.
I tried to enter the bootloader while holding the Power-Button while soft-resetting. BootLoader is seen, but shows a "gsm error".
I can not establish an active-sync-connection via USB-Cradle.
What can I do to rescue my XDA? Is there any possibility or can i put it to trash?
Any advice is very welcome!
Thanks!
Miwu
Dear all,
I am facing the same problem (XDA ROM update crashed) as miwu now . Can any expert teach me how to solve this problem by myself :?: or I need to let O2 engineer to fixing it :!: .
Thanks a lot !
Please HELP !
Dear all,
I can't get the white screen with the blue bar on the top because I am using 02 xda ver 4.00.11 (PPC2003), so that I can't use the repair.zip to fix it.
Any expert can to teach me how to fixing it by myself ?
Thanks !
Hi,
after half a night i fixed my described problem with the gsm-error in the bootloader.
I will post my solution in a new thread today in the afternoon.
Thanks to XDA-Developers for this great forum, its very helpful.
Thanks and regards from Berlin!
Miwu
Miwu,
That's great for you !
BTW, do you using PPC2003 as well ?
Hope to see your solution soon !
Thanks ! :wink:
Hello,
just posted my solution in a new thread
http://xda-developers.com/phpBB/viewtopic.php?t=2489
take a look there.
We first tried to fix it using 2003-SD-Flash but it become buggier, the pling-sound does not played, so we flashed back to PPC2002 and made it as described in the new thread!
Hope, you can flash CE with an PPC2002, maybe it helps, but I do not really know. Simply try or not!
Best regards from Berlin!
Miwu
I will try but I don't think it will work on mine because I am using bootloader v5.17 . Anyway, think for your help !
Best regards ! :lol:
Urgent Help needed
My dear forum colleagues,
I have attempted to upgrade my QTEK 1010 using the ali-win2k3 file that contained the Radio stack 4.00.01
Previous stack was 3.16
Unfortunately after upgrade the image stays 'Test only Not for Sale' I have another Radio version on my SD Card but I don't know how to unload it.
As now my brain halted due to panic, Please give me instructions as it was for dummies to get out of this mess!
PLEASE HELP.
Also note that the WALLBY Bootloader is V5.15 and goes to GSM OK and stays there without providing any action buttons or so...
Please advice urgently.
you urgent help will be much appreciated!
http://xda-developers.com/forum/viewtopic.php?t=2189
THANK YOU ALL!
THANKS ! I resolved. The card reader does magic
Re: THANK YOU ALL!
finikas said:
THANKS ! I resolved. The card reader does magic
Click to expand...
Click to collapse
Glad to here you resolved it, sorry about the late reply.
Re: THANK YOU ALL!
finikas said:
THANKS ! I resolved. The card reader does magic
Click to expand...
Click to collapse
Did you try to install another ROM and got stuck? You pm'd me after this post. Please advise.
all 4.xx.xx ROMS that I try fail. They freeze in image.
all 3.xx.xx are ok.
hi guys,
tried to upgrade my alpine,but know it will not get out of the serial v1.01 screen.any and all help is needed thank you
The answer should be here in the forum. Try reading....
Anyway, moved your thread in the alpine forum, because it´s not a general issue....
Stefan
use the earlier version of activesync.(3.8)
activesync v4.xx doesnt work
tcr said:
hi guys,
tried to upgrade my alpine,but know it will not get out of the serial v1.01 screen.any and all help is needed thank you
Click to expand...
Click to collapse
Solution for getting Alpines out of the Bootloader screen:
http://forum.xda-developers.com/showthread.php?p=1739989
Hi Can anyone please help me how to overcome my problem? My device is stuck in the boot screen . Things don't change even after hard reset...Can anyone upload the original shipped rom for Dopod C800 1.09 rom?
hey my friend the same just happend to meee ;(
Do you found a solution ?
murali509 said:
Hi Can anyone please help me how to overcome my problem? My device is stuck in the boot screen . Things don't change even after hard reset...
Click to expand...
Click to collapse
put the phone in bootloader and flash the original rom
I have the same problem. No matter what rom code I flashed, always update error 300. Is there any idea to get rid of this problem? Thanks!
Strange... Isn't error 300 about using a RUU flasher on the wrong device?
Got my device to life after going to the service centre.... Successfully changed my Rom this time after using Hard spl by Canonyang and now I had flashed Touch IT V4.40....
My sincere advice from my experience...
Please read the instructions thoroghly before you attempt anything..
Happy flashing
murali509 said:
Got my device to life after going to the service centre.... Successfully changed my Rom this time after using Hard spl by Canonyang and now I had flashed Touch IT V4.40....
My sincere advice from my experience...
Please read the instructions thoroghly before you attempt anything..
Happy flashing
Click to expand...
Click to collapse
THANKS!!!
We tell it soooooo often. But it is good to hear that your device is back to life.
And it is GOOD to hear that the instructions we are giving - are helpful...
FOR EVERYone...
Hey dude, thanks a lot for your new rom... I'm a novice in this field and dont know anything..Does ur rom touchit4.4 have keyboard issues on Dopod C800?
murali509 said:
Hey dude, thanks a lot for your new rom... I'm a novice in this field and dont know anything..Does ur rom touchit4.4 have keyboard issues on Dopod C800?
Click to expand...
Click to collapse
it´s NOT mine. it is ITJE!!!
please ask in this thread. and please find out keyboardissues by flashing. i guess there is noone else with dopod running it...
Thank u for the quick reply....
Hi.
I was thinking of making my own I-mate Jasjar rom. Can anyone help on this plz .It will be really nice if anyone can tell me all the steps.
Welcome to forums
1st step read the Wiki, then enter to mobile 6 section on Universal and have a deep read on the kitchens published there.
Good luck,
hey thanks alot for your help. and sorry for the late reply. if i need any help again ill ask u . thans again