Database Users

caller id not showing in merged rom please help.

hi sin i flashed my xda with your merged rom.
everything is ok expect the caller id.
it dosen't show the id is there any cab file for that?
if yes can you please post it here in this message so who ever's xda has this problem can use it.
thanks in advance.

http://forum.xda-developers.com/viewtopic.php?t=15176
as far as i understood the merged rom has an older version in it, but I don't have it on my xdaii.
If it has installed itself on your himalaya, uninstall instructions are in the thread

thanks M4io
but neither winzip nor win rar recognized the file i downloaded on the thread you have posted.
wnen i click on the download it shows.
(download the 1.34 mb file, 'download PHP').
now what i want to know is what is PHP?
and why dosen't the winzip & win rar recognized's this cab file.
thanksin advance.

jaykumarr said:
hi sin i flashed my xda with your merged rom.
everything is ok expect the caller id.
it dosen't show the id is there any cab file for that?
if yes can you please post it here in this message so who ever's xda has this problem can use it.
thanks in advance.
Click to expand...
Click to collapse
Start>Programs>File Explorer>My Device>Extended Rom
Install Caller_ID_W..

PHP is a language which runs on the webserver. so when you click on download.php you actually start a service on the server, which gives you the requested file.
now these CAB-files are pocketpc cab files ad are kind of setup programs for PocketPC , so you have to copy the CAB to your pocketpc and execute it there.
You can execute it by putting it in your extended rom, modify the config.txt and hard reset (I hope you know what hard reset means/implies)
or simply by tapping on it in PPC file explorer. In this case the CAB will disappear after installation. But if you have a previous version of Caller_id installed, you best uninstall it first : by editing the registry as explained in the forementioned thread, deleting as much files from the previous thread as it allows you to, soft reset, and delete the rest of the files.
I sure hope you understand all this, because if you don't know what php is, don't know what PPC CABs are, then I would advice you not to mess around too much with your PPC internals.

M4io
i know what is cab file.
but i wanted to know weather the file is in zip format cus win zip doesn't recognize it and even when i paste it on my ppc it doesn't install it simply says (there is no application associated with ''caller_id_wwe'' run the application first,then open the file from with in)

sounds like something corrupt during download
clear your internet cache and download again, don't unzip/unrar it, just copy the complete CAB file to your PPC
almost everything is installed with cab, so it would be weird that no association exists. Or during the copying to PPC maybe the conversion went wrong.
I'm really guessing now, just keep trying.

Enable MMS folder via Registry

Hi guys,
Question....does someone maybe know the registry settings to enable the mms folder in WM5?
Sure I know I can use a cab for it, but I am trying to find out what registry settings are needed to enable the MMS folder without installing the CAB file.
I am looking for the specific settings for a HTC Wizard, but settings from another HTC phone would be a good indication to start (I hope).
Regards, thanks and to all a very happy new year (of developing),
Molski

One of the CAB files I posted (I think) had it in it.. And I know I've seen the keys around here somewhere.. Unfortunately, I don't have an 8125 any more though, and I'm not quite finished with poking around my 8525 yet (planning on unlocking the ExtROM today so I can start deciphering CAB files).
I'll let you know what I come up with from the 8525 perspective.

I found your CAB file and I extracted it.
Unfortunately the same results as I have with the T-Mobile MMS Folder cab....it doesnt work
I install the CAB file, the MMS folder shows up, I export all the MMS Registry settings, do a hard-reset, import all the Registy settings and no MMS folder showing up.
I think it has something to do with the following registry values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\EntryID]
"Deleted Items"=dword:00009F00
"Inbox"=dword:0000F79F
"Outbox"=dword:00005FBB
After a hard-reset and installing this CAB file every time the values are different??

Could be. I'm honestly not too sure. But whateve reg values are in that CAB I've used over countless resets.
I'm getting ready to walk out the door in a few minutes, but when I get to my buddy's place I should be able to sit down for a few and look at the CAB and see what's in there again and go from there.

Take a good look at the values I posted....I really think it has something to do with those values changing every time you install the cab after a hard-reset.
Thanks!
Molski

Which CAB file are you using? I see a couple that I've posted.. Want to make sure I'm looking at the right one..

Beside having the MMS Folder to appear, I think you should have a service provider cab in ExtRom to configure to the right Service Provider's Server or you have to manually key it.
I am not sure if Wizard is the same.

cab files like mms folder and contain the values of certification on them it cannot be integrated so far, i tried,when you install a cab like mms, it writes several numbers to the cert part of the registry,once you install another cab that contains cert values ,it just overwrites the old values .
this is why the service providers never integrates such settings.
all this values that the mms cab writes to the registry can be found in the .XML file ,but must of them are build in the setup .dll ,the dll is coded with a set of instructions ,and this are the one that enable mms.
lets say you manage to extract all the reg settings for mms,then build into a custom cab this is all fine,but now you also want to integrate lets say..smardialing,well u cant because when you export the reg settings from one it overwrites the other because they use the same address in the registry.(cert}

I already have integrated SmartDialing in the default.hv and it works, will install a few cert apps and check if Smartdialing still works.
The only thing that is giving problems so far are:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\EntryID]
"Deleted Items"=dword:00009F00
"Inbox"=dword:0000F79F
"Outbox"=dword:00005FBB
I checked every settings that is created by the MMS folder Cab, but only these settings will change after installing the CAB.
But after reading your answer Faria, I think we cannot create inbox folders for whatever via the default.hv, is this true?
Thanks,
Molski.

molski said:
I already have integrated SmartDialing in the default.hv and it works, will install a few cert apps and check if Smartdialing still works.
The only thing that is giving problems so far are:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\EntryID]
"Deleted Items"=dword:00009F00
"Inbox"=dword:0000F79F
"Outbox"=dword:00005FBB
I checked every settings that is created by the MMS folder Cab, but only these settings will change after installing the CAB.
But after reading your answer Faria, I think we cannot create inbox folders for whatever via the default.hv, is this true?
Thanks,
Molski.
Click to expand...
Click to collapse
Smart Dialing working?
When?
How?
Where?
Please tell us.

These registry values are included in default.hv and/or user.hv
And it works
Maybe I forget something, but test it and let me know!
Molski
p.s. These Reg values are from a HTC Wizard

molski said:
These registry values are included in default.hv and/or user.hv
And it works
Maybe I forget something, but test it and let me know!
Molski
p.s. These Reg values are from a HTC Wizard
Click to expand...
Click to collapse
yes smartdialing works .i did it a month ago....but mms no.
once you put the cert settings for one of those cabs into the default hive its fine... but if you put another cab settings from another program into it,it gets overwrited .

molski said:
These registry values are included in default.hv and/or user.hv
And it works
Maybe I forget something, but test it and let me know!
Molski
p.s. These Reg values are from a HTC Wizard
Click to expand...
Click to collapse
Does this works on Universal Helmi Aku3.5 V1.3?

Is there a way to silently install a CAB file?

Hi Guys,
I know on Windows (XP) or other OS, we can install some files "silently", without a setup screen, choosing the install folder and things like that.
Is there a way to install CAB file silently on WM5, I got 2 cabs that I want to install, but dont want the user to "see it install''.
Maybe with adding some parameters to wceload.exe?
Regards,
Molski

Hi!
\Windows\wceload.exe my.cab /silent will install my.cab silently.
Remember to wait for wceload to exit before you try to install a second cab. You must also lower the securitylevel of the device or get the files signed for it to work......
Øystein

I generally use /noui switch.

hi guys,
this is my first time here in xda-developers,
please check this link if u r interested in intall the cab file silently
http://www.codeproject.com/useritems/wm2003cab.asp
[Edit by V: please don't use all caps. I've lowercased you]

Using xplode's cabs as the extended rom

FIXED! NOW IT SHOULD WORK!
I hope this can help some of you.
To use xplode's cabs as the extended rom first you need to create a folder on your SD card named ExtROM
Then you need to extract all files from the cabs.rar to this folder (ExtROM on your SD card). You will need winrar or 7zip to extract the files.
Now go to ExtROM folder and rename the file SAMPLE_CFG.TXT to CFG.TXT. You can edit this file to customize it to your needs.
The final part is to download this file: extromtools.rar and extract the file autorun.exe and OemExtDll.dll to the ExtROM folder on your SD card.
Now you need to hardreset your device or simply execute CheckAutorun.exe which is located on your windows folder.
More info here:
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Understand
Execution of the Extended ROM
* CheckAutorun.exe (which is started from \Windows\Startup\CheckAutorun.lnk) executes the AutoRun.exe
* AutoRun.exe is found in the \Extended_Rom Folder
* AutoRun.exe reads the \Extended_Rom\Config.txt and executes the commnands in that file
* The pointer for AutoRun.exe HKEY_LOCAL_MACHINE\Comm\AutoRun is set to \Extended_ROM\AutoRun
* The pointer for Config.txt HKEY_LOCAL_MACHINE\Comm\AutoRunCFG is set to \Extended_ROM\AutoRunCFG
* The Touch screen is disabled by the first command (TPDisable.exe)in the Config.txt
* The Touch screen is enabled by the 2nd to last command (TPEnable.exe)in the Config.txt
* The last Command of the config.txt (RST) performs a soft reset
Click to expand...
Click to collapse
FOR PEOPLE WITH THE MMS PROBLEM:
xplode has created new cab files that include the xml and make the instalation a breeze.
xplode said:
ArcsoftMMS4.2.8.1.cab - updated cab for Arcsoft MMS Composer - one of the xmls is included in it
MMS_enable.cab - enable MMS in messaging
WU_enable.cab - enable windows update connectivity
WMDC.cab - adds T-Mobile UK support link in Windows Mobile Device Center in Windows Vista, adds high res icon for Blueangel, Changes Manifacturer and Model properties to T-Mobile MDAIII
Click to expand...
Click to collapse
Here are the files:
xplode's
http://rapidshare.com/files/52623532/cabs2.rar
mirror
http://www.megaupload.com/?d=QWCPHXT1

It works, thanks

Speed_Sheep said:
It works, thanks
Click to expand...
Click to collapse
Thanks for the reply.

Where is xplode's tool file - URL please..........

mms account
hi
i m not getting any mms account after auto run of xplod's extrom.

kumar00455 said:
Where is xplode's tool file - URL please..........
Click to expand...
Click to collapse
It's in the first post on the thread where you can download the new wm6 rom.

well remove system attributes from the xml files and you will get it

xplode said:
well remove system attributes from the xml files and you will get it
Click to expand...
Click to collapse
here is no system attribute on xml. all the files hv archive attributes.can u tell me how i do that

Thanks LGSilva.
Very good help
Obrigado!

thanks LGSilva, it works fine
fine help from u

LGSilva said:
FIXED! NOW IT SHOULD WORK!
I hope this can help some of you.
To use xplode's cabs as the extended rom first you need to create a folder on your SD card named ExtROM
Then you need to extract all files from the cabs.rar to this folder (ExtROM on your SD card). You will need winrar or 7zip to extract the files.
Now go to ExtROM folder and rename the file SAMPLE_CFG.TXT to CFG.TXT. You can edit this file to customize it to your needs.
The final part is to download this file: extromtools.rar and extract the file autorun.exe and OemExtDll.dll to the ExtROM folder on your SD card.
Now you need to hardreset your device or simply execute CheckAutorun.exe which is located on your windows folder.
More info here:
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Understand
Click to expand...
Click to collapse
I hv installed xPlode package but I can't see the MMS setting and account in Pocket Outlook. Can I solve this problem?

This is from xplode:
xplode said:
well remove system attributes from the xml files and you will get it
Click to expand...
Click to collapse

I have created cabs which replace the xml files. The one of the xml files i have merged with the Arcsoft MMS cab and there are two other cabs for enable MMS into messaging app and for enable the windows update. also i have created from the other xml cab which does this in vista:
also it adds the T-Mobile as manifacturer and MDAIII as model in properties of it.
i will test the cabs and post them, have to do a hard reset in order to test them in action

xplode said:
I have created cabs which replace the xml files i will test them and will post them
Click to expand...
Click to collapse
Thank you xPlode, I'm waiting your cab

Excellent, looking forward to your new cab. I also need MMS but it didn't work for me.

also by the way you can always use this for loading xml configurations
http://forum.xda-developers.com/attachment.php?attachmentid=37404&d=1176889923

Tried it, it just gives me an error when I run it and click on "click me", I get an windows error.

xplode said:
I have created cabs which replace the xml files. The one of the xml files i have merged with the Arcsoft MMS cab and there are two other cabs for enable MMS into messaging app and for enable the windows update. also i have created from the other xml cab which does this in vista:
also it adds the T-Mobile as manifacturer and MDAIII as model in properties of it.
i will test the cabs and post them, have to do a hard reset in order to test them in action
Click to expand...
Click to collapse
Looks pretty =) Will definitely try it when I have time...

ArcsoftMMS4.2.8.1.cab - updated cab for Arcsoft MMS Composer - one of the xmls is included in it
MMS_enable.cab - enable MMS in messaging
WU_enable.cab - enable windows update connectivity
WMDC.cab - adds T-Mobile UK support link in Windows Mobile Device Center in Windows Vista, adds high res icon for Blueangel, Changes Manifacturer and Model properties to T-Mobile MDAIII
http://rapidshare.com/files/52623532/cabs2.rar

hi xplode's
i want repeat to install the Helmi wm6 rom, but
now i have in my blueangel create a ExtROM with your cabs.
what i have to do before reinstall the Helmi rom's.
i have to cancel or format the extrom???
please help me

Cab file creating

i just put together a cab file (for personal use) to remove sms threading (due to upgrading roms alot etc)
however i have hit a brick wall.
i do not know how to make the device restart after install?
i have compared to other cab files but the only difference is the other cabs install files not registry?
i'm not all that good with programming however i would really like to complete this cab for ease of reloading a new rom - so any input would be grateful - thank you

For cab file creating i use PocketPC Installation Creator. In the menu there is a check box to set the 'reboot after installation' behaviour. I played with it but noticed that my device only rebooted after installation of files. Because i found it to much effort to look into it, i didn't. After all it is quite easy to reboot manually.
You could use MSCEinf to examine different cabs and look for the reboot after installation setting (http://www.codeppc.com/telechargements/msceinf/msceinf.htm)
I also noticed that some people make cab files from .xml files (sleuth for example). Maybe this method has other options than cabarc in combination with inf files.
Cant give you any answers, still hope it will be of any help.
Good luck and post back result if you figured it out.
Arjan

The easiest way tocreate CAB files is to purchase a copy of WINCE Cab Manager from OCP Software
they have just released a new version which supports Vista

i created the xml document then created the cab from it.
should have said that sorry.
so i was looking for a way to restart device via the xml..
thanks for the input so far