Database Users

I cant find my "Running Programs"

I just hard reset my magician. Since i'm using big storage (my friend did it), only some of the cab files from extended_rom are installed. Now i just found out that my smart dialing, MMS, O2 plus are not included. It was easy to recover those programs since i know the cab files.
However, i cant find the right cab for "Running Programs". Does anyone know which one? Thx.
Sorry for the bad language

Running programs - do you mean in Settings > system > memory > running programs?
If you need a task killer I can send you one or there's many around.
V

That's the one. Thx . So actually it's not a stand-alone program. Yes i found the running programs.
So, the question is changed now. I need the shortcut to that program. Usually magician has the blue box icon with a picture of someone running. Do you know the shortcut?
Thx.

Just tried to restore that icon from my old backup before it crashed. I thought it was just only a link to some program. But it is not! It is an exe file and after i restored it, click the Running Programs, it says "Error opening the shortcut or locating the target filename".
Any clues?

My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.

What does that file do? Just open up the running programs control panel?
If you need it back, just type the following into a text file on your PPC
Code:
22#ctlpnl cplmain.cpl,4,2
and save it as Memory.lnk
Then double click on that file.
Tell me if it works ok.
V

@vijay
i just wanna return my magician to the default system . that's why i'm so curious to get back that program.
@ampda
i'll try that file. thx for the info.

I can post my CAB file but it will also add the O2 xda defaults that can with the Aussie unit

ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...

THANK YOU!!! finally i can access my running programs.
anyway, ive another question . let's say i want that program to be installed automatically after I hard reset. how can you do that? so i do not have to restore them manually from my sd card. thx.

dinoalbert said:
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
Click to expand...
Click to collapse
To get the menu and icon run O2Auto.sa.CAB, then install the telco(s) you want to be in the autoconfiq menu.

@nsriza, thanks!!! As simple as this, and I can have my Autoconfig back already?
I thought I need to manually edit the autoconfig.txt to change the paths of the cab files?
Btw, I have already installed the cab files for all the Telcos that I need....but not the O2Auto.sa.CAB yet. Is it okay if I install that O2Auto then install again the Telco cabs?
Thanks...

So has anyone knew how to setup auto installation for cab files (eg. MMS, SmartDialing etc) after hard reset? thx

another OOT question...what does autoconfig.txt and config.txt do? and how to use it?
thx

Im assuming your asking for auto installation for after a hard reset using big storage. if you search for "AutoRUn" on this forum you should find a link on how to create an autorun folder on your storage card. you need the autorun.exe (Found in the search for the link) and a folder called 2577 created in the root directory of your storage card. then all you need to do is add all the CABs that you want to auto install after a HR to a ZIP (not Rar) archive and call that archive extROM.zip. then put that in your 2577 directory and hardreset and it will install all the files in the zip. if you havent already installed the cabs you put in the zip it will actually start installing them as soon as you insert the SD card. have a search around you will find lots of info about this subject.
SpeedN

@Speedn
thx for the suggestion. it's very helpful.

@rockafeller
hi i used big storage to convert my german rom (o2 xda mini) to wwe 1.12. now i lost some features like MMS,Smart dialling, Home zone control, O2plus. (as it was the case with you). It would be great if you could share here how did you get them back to work? i mean, i want the procedure to do so. i have a backup of my german rom.
one more question. i dont see the Phone pad option in my text input list after the bigstorage patch. how can i get it back. any suggestions would be so great..
thanx in advance
kk

@visvaram
if you backup ur extended_ROM, u should able to find related cab files, such as MMS**.cab, SMARTDIALING**.cab. Just tap those files and it will be installed automatically. FYI, backup ur cab files first b4 installing.
Im not sure about O2plus and zone files. Anyone care to help?

extraxting a cab file from an exe file

in paticular i want the cab file for MorphGear. how do i do this? I have tried using cabinst but that doesnt seem to do anything

Some ".exe" are extractable with a soft such as "Winrar" :wink:

if that doesn't work then try the following.
1. Remove app from you computer and device
2. Disconnect device from comp
3. Run exe for app
4. When you see the message "this app will be installed on next sync" go to start---search
5. look for *.cab that was created or modified today and is less than 1MB (change file size to whatever value you think is appropriate)

Problem is..
I cant get activesync to work, hence needing the cab file to install morphgear :-(
So I dont think that will work
Any other ideas?

chrisredmayne said:
Problem is..
I cant get activesync to work, hence needing the cab file to install morphgear :-(
So I dont think that will work
Any other ideas?
Click to expand...
Click to collapse
Can you install Activesync tho, dont have to sync just get it to install. If you can than run the morphgear.exe and after it says it will install on the next sync, go to C:\Program Files\Microsoft Activesync\ and you will see a Marat folder, the .cab is in there. It will almost always make a new folder and put the .cab of the program you are install into the Activesync folder, if it is not there than it created its own folder under Program Files and the .cab should be in there.
Just because im bored I downloaded this MorphGear.exe
http://dl.filekicker.com/send/file/155967-7256/MaratSetupPPC2003.exe
And have attached the .cab that was put into my ActiveSync folder for you.

wow thanks that was very nice of you!
i checked that folder and there was about 10 different morphgear files that id been messing about with! And they worked! Well chuffed i am

Is anyone playing gameboy games on it? On the website listed in the first post the module (MaratSetupPPC2003.exe) leads to an invalid link. But i found it on xda http://forum.xda-developers.com/showpost.php?p=904167&postcount=5 i installed it but it only wants to see snes roms

issues installing S2U2

Okay it says its a cab. While I am very new to wm phones I have been able to install a ton of other cabs.
When I go to install this fist off it doesnt look like a cab it has the name and the windows flag and .rar as the extension.
When I click on it I get the following.
There is no application associated with "s2u2-0.3-WM5". Run the application first, then open this file within the application.
This is supposed to work with WM6 and I know others here have done it. I am just not so bright when it comes to this and cannot figure out what I am doing wrong. I tried just copying it into the windows folder but that didnt work either.

You have to extract the rar file to get the cab file inside for installation. Pls try again.

thanks
thanks mate works like a charm

Cab file creating

i just put together a cab file (for personal use) to remove sms threading (due to upgrading roms alot etc)
however i have hit a brick wall.
i do not know how to make the device restart after install?
i have compared to other cab files but the only difference is the other cabs install files not registry?
i'm not all that good with programming however i would really like to complete this cab for ease of reloading a new rom - so any input would be grateful - thank you

For cab file creating i use PocketPC Installation Creator. In the menu there is a check box to set the 'reboot after installation' behaviour. I played with it but noticed that my device only rebooted after installation of files. Because i found it to much effort to look into it, i didn't. After all it is quite easy to reboot manually.
You could use MSCEinf to examine different cabs and look for the reboot after installation setting (http://www.codeppc.com/telechargements/msceinf/msceinf.htm)
I also noticed that some people make cab files from .xml files (sleuth for example). Maybe this method has other options than cabarc in combination with inf files.
Cant give you any answers, still hope it will be of any help.
Good luck and post back result if you figured it out.
Arjan

The easiest way tocreate CAB files is to purchase a copy of WINCE Cab Manager from OCP Software
they have just released a new version which supports Vista

i created the xml document then created the cab from it.
should have said that sorry.
so i was looking for a way to restart device via the xml..
thanks for the input so far

[HELP] How to register a dll?

I try to create a program which consists of
.asx files (to show online tv channels),
.lnk files (shorcuts to the .asx files) and
a .dll file which contains only some .ico files (icons of the tv channels).
I added all these files to a cab using WinCE Cab Manager and tried to install it on my ppc. So far so good. The problem occurred when the message “The program can not be installed. Choose another location” appeared during installation, just after the process bar was filled.
Although I have no idea about computer programming, I have created many cab’s with WinCE Cab Manager for skins I have created for several programs. Anyway, I realized that the problem occurred due to the .dll file, since this is the first time I add such a file in a .cab.
I created my .dll file using a .dll from another program which had only icons in it, as well. I deleted them using Restorator 2007 and I had an “empty” .dll sized 4KB. Then I added my icon files using XN Resource Editor.
I searched the Internet to see what might be the problem with the .dll and I found out that I have to “register” my .dll file. I really have no idea what this means but it needs to be done. I also found an option in WinCE Cab Manager for “self-registering” file, but it didn’t work either.
So, the question to you dev guys is how can I register my .dll file, or should I create it from the beginning with another way?
Please help! Thanks in advance!

sorry to repost but it seems that posts keep coming in this forum and this thread is already in the second page and I'm afraid that noone will see it and reply to it. By the way, is there any special sub-forum for such questions?

This may help. I use his instructions to edit existing DLL's
http://www.modaco.com/content/i9x0-...88904/lisbian-taskbars-for-i910/#entry1023568
It will unsign the dll which will probably fail on your custom dll but it should sign it when you are done editing.

NilsP
Many thanks for your suggestion but unfortunately it didn't work for me.
As you said, this is mainly for resigning already signed .dll files.
Any other help will be appreciated. I can attach it here if anypne is willing to help. Or just tell me the way. Thanks!

I deploy a few dll's with my app, without any problem. If the installer complains about the location, what did you specify where it should go?

There are 2 approaches to solve this problem:
1.) If you have a private key to match a certificate in the device's certificate store, sign the .dll and .cab with this private key and it will be installed with elevated privledges, and be successful. To facilitate this you can install the "SDK Certificates" - and sign with the matching private key (you should be able to find these on a search, term "SDKCerts" or similar)
2.) Look for an "Application Unlocker" or other security reduction tool, run it, and you should be able to install the cab. On this note, if you check here, it will give you a more technical overview of the security policies. You want to change 4101 / 0x1005 to "SECROLE_MANAGER" (8) - which tells the system to install it with elevated privledges. Also make sure 4102 / 0x1006 is set to 1 to allow unsigned applications.

6Fg8
I don't believe that is the location I specified that causes the problem because when I deleted the .dll file from the .cab, it was installed properly. How do you create your dll files? With programming or you just edit existing files? If I send you my .ico files, will you be able to create the .dll file for me?
Da_G
Thanks but both approaches seem very complicated for me!

So, will I need Visual Basic in order to do this or is there any easier way? Can anyone sign the dll for me?

angelos_cy said:
6Fg8
How do you create your dll files? With programming or you just edit existing files? If I send you my .ico files, will you be able to create the .dll file for me?
Click to expand...
Click to collapse
Yes with programming, C++ or .net. Never had any issue with signing. I can try to make a dll if you send me the icons (or post them here if they aren't too secret ).

6Fg8 said:
I can try to make a dll if you send me the icons (or post them here if they aren't too secret ).
Click to expand...
Click to collapse
I have sent them to you by pm. They are not secret at all but I will create a "program" (wannabe ) with that dll and I want that program to be a surprise for users of the forum where I'll post it. I may post it on xda too, but it's nothing important.
Many thanks!

angelos_cy said:
The problem occurred when the message “The program can not be installed. Choose another location” appeared during installation, just after the process bar was filled.
Click to expand...
Click to collapse
This happens because you've changed resources in signed file, which changed file checksum and invalidated it's signature, and Windows installer refuses to install file with invalid signature. But it won't refuse to install this file WITHOUT signature at all - so use unsigner (search for it on XDA) to remove signature completely; if you encounter error, try to remove signature from original (unmodified) file, and then change resources in it...

6Fg8
the_ozyrys
Thanks to both of you!
6Fg8 has created and signed the dll for me and it finally worked, but I also tried the_ozyrys' method and it also worked.
So thanks to baniaczek too, since he created the unsigner.exe.

Everything worked fine with the dll. Now the cab is installed properly.
However, I have another problem. Just after the installation of the cab on my ppc, it seems that the device freezes for about a minute. This is propably because my cab contains a lot of shortcuts (.lnk files) that go under Programs folder.
So, I would like to ask for another favour, if it's possible. As I said I intend to give this cab to others too. Since this delay can make them believe that my program has freezed their device, I would like to make the cab restart the device just after installation and after uninstallation as well. I think this is made with the "Setup.dll" which I don't know how to create.
If anyone knows how to do this and has the time for it, could you please create this setup.dll for me. If the cab is needed to do this, just tell me to send it to you.
Thanks in advance!

Anyone? Plzzzzzzz!

If you want to sign .dll or .exe u can use the apps posted in the two posts below
http://forum.xda-developers.com/showthread.php?t=432041
or
http://forum.xda-developers.com/showpost.php?p=3530246&postcount=18

raykisi
Thanks for your answer but 6Fg8 and the_ozyrys already helped me on that.
My question now is how to create a setup.dll in order to make my .cab to prompt the user to restart the device after installation and uninstallation. If anyone can do it for me, I can send you the .cab which I alreday created and you can add the setup.dll with those functions.