in paticular i want the cab file for MorphGear. how do i do this? I have tried using cabinst but that doesnt seem to do anything
Some ".exe" are extractable with a soft such as "Winrar" :wink:
if that doesn't work then try the following.
1. Remove app from you computer and device
2. Disconnect device from comp
3. Run exe for app
4. When you see the message "this app will be installed on next sync" go to start---search
5. look for *.cab that was created or modified today and is less than 1MB (change file size to whatever value you think is appropriate)
Problem is..
I cant get activesync to work, hence needing the cab file to install morphgear :-(
So I dont think that will work
Any other ideas?
chrisredmayne said:
Problem is..
I cant get activesync to work, hence needing the cab file to install morphgear :-(
So I dont think that will work
Any other ideas?
Click to expand...
Click to collapse
Can you install Activesync tho, dont have to sync just get it to install. If you can than run the morphgear.exe and after it says it will install on the next sync, go to C:\Program Files\Microsoft Activesync\ and you will see a Marat folder, the .cab is in there. It will almost always make a new folder and put the .cab of the program you are install into the Activesync folder, if it is not there than it created its own folder under Program Files and the .cab should be in there.
Just because im bored I downloaded this MorphGear.exe
http://dl.filekicker.com/send/file/155967-7256/MaratSetupPPC2003.exe
And have attached the .cab that was put into my ActiveSync folder for you.
wow thanks that was very nice of you!
i checked that folder and there was about 10 different morphgear files that id been messing about with! And they worked! Well chuffed i am
Is anyone playing gameboy games on it? On the website listed in the first post the module (MaratSetupPPC2003.exe) leads to an invalid link. But i found it on xda http://forum.xda-developers.com/showpost.php?p=904167&postcount=5 i installed it but it only wants to see snes roms
Related
hey guys...
ok ive had few problems actually experimenting too many things kicks off the rom OBVIOUSLY...i would like to do something like this....
1.my xda II hard resets it self for obvious reasons (too many experiments)
2.there are too many programs installed on my xda II which i use most of the time, few of them are cab so its easy for me to copy them to storage card and install but many others are .exe so everytime a hard reset i have to connect the xda II to the cradle and run the software from the computer....
what i would like to do is just convert or extract .cab from .exe so that everytime i dont have to go through the same thing....this means i can also copy all my softwares as backup on my xda II storage
P.S : there are only few .exe softwares that allow me to extract .cab from it by right clicking and going to winzip option or winrar .....most of them are to be run all over again.
please help
thanks alot in advance
if it's exe which you run from the pc and it using activesync to install the program in most cases all you need to do is to chage the extention from exe to zip and copy out the cab from inside the zip file
otherwise you need an cab maker program search should give you a bunch
Rudegar said:
if it's exe which you run from the pc and it using activesync to install the program in most cases all you need to do is to chage the extention from exe to zip and copy out the cab from inside the zip file
otherwise you need an cab maker program search should give you a bunch
Click to expand...
Click to collapse
hey man...
did as you said.....will give you an example what i did...
copied noname.exe to d:/
went to command prompt went to d:/ renamed noname.exe to noname.zip
and came back to d:/ in windows and double clicked it and it says "Cannot open file : it does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
any yeah also tried right click extract here same error message
any ideas ? i am sure u do have few
thanks
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Rudegar said:
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Click to expand...
Click to collapse
gotcha....tools ....folder options ...view....uncheck hide extensions for uknown file types....ok ......
went to \program files\microsoft active sync on my computer went to the folders of programs installed and voilllla..... found the .cab and .arm files
thanks alot for the help mate
Rudegar said:
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Click to expand...
Click to collapse
An alternative method (slightly long winded but reliable)...
Install the product on the device then install it again, when the "Reinstall Y/N?" dialog appears on the device perform a soft reset. If installing to Storage or Storage Card, the CAB will be in the root of that device, if installing to Main Memory you will find it in \windows\appmgr\install
No men
get it
see in c:\archive of program\microsoft activesync
when you install a program for defect install this place.
this not happens is for this program get menu opcional installing c:\archive of program\NaMe Program
fine you only copy files .cab in you storage
the problem is when you intall the cab file this automaticaly is delete..****...
for this not happen install this before install any .cab NoDeleteCab.cab
thiss run in my Imate jam ...
enjoy...
Re: No men
SuckMe said:
get it
see in c:\archive of program\microsoft activesync
when you install a program for defect install this place.
this not happens is for this program get menu opcional installing c:\archive of program\NaMe Program
fine you only copy files .cab in you storage
the problem is when you intall the cab file this automaticaly is delete..****...
for this not happen install this before install any .cab NoDeleteCab.cab
thiss run in my Imate jam ...
enjoy...
Click to expand...
Click to collapse
that's coool...i guess i also read somewhere that if you hold click on the cab file in the pda and uncheck or check the read only box and then run .cab it wont get wiped out.....have'nt tried it though...
regards....
mtbsoft said:
Rudegar said:
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Click to expand...
Click to collapse
An alternative method (slightly long winded but reliable)...
Install the product on the device then install it again, when the "Reinstall Y/N?" dialog appears on the device perform a soft reset. If installing to Storage or Storage Card, the CAB will be in the root of that device, if installing to Main Memory you will find it in \windows\appmgr\install
Click to expand...
Click to collapse
ok i tried this.....but it did'nt quite work out.....i double clicked a file it opened up active sync asking for reinstall yes or no....i did a soft reset on the pda and took it out from the cradle and clicked no and cancel on that reinstall window.... where did i go wrong ?
is it like that i have to click yes and when it starts installing on the pda then soft reset the device ?
regards
zairyaab said:
that's coool...i guess i also read somewhere that if you hold click on the cab file in the pda and uncheck or check the read only box and then run .cab it wont get wiped out.....have'nt tried it though...
Click to expand...
Click to collapse
A read only CAB won't be deleted, I use it all the time.
zairyaab said:
mtbsoft said:
...when the "Reinstall Y/N?" dialog appears on the device perform a soft reset....
Click to expand...
Click to collapse
is it like that i have to click yes and when it starts installing on the pda then soft reset the device ?
Click to expand...
Click to collapse
Yes, you have to wait for the CAB file to be copied over to teh device and then it says "Reinstall Y/N?" on the device, then you do the soft reset.
If you are going to use CAB files I would strongly recommend you grab a copy of CABInst as well, it is excellent (and free).
MMm
This work in my Imate Jam
i don't know
this work in your device
but this cool
the Imate Jam autodelete .cab files when finish the install this
enjoy....
mtbsoft said:
Rudegar said:
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Click to expand...
Click to collapse
An alternative method (slightly long winded but reliable)...
Install the product on the device then install it again, when the "Reinstall Y/N?" dialog appears on the device perform a soft reset. If installing to Storage or Storage Card, the CAB will be in the root of that device, if installing to Main Memory you will find it in \windows\appmgr\install
Click to expand...
Click to collapse
excellent (Y)
Hi guys,
I think I don't understand the difference between the desktop (.exe) installation and the .cab installation for a ppc programs....
Is there a possibility to install the program in a dir. of the SD? For example, I'd like to create a dir called "Program files" in the SD.
P.S: How can I change the default location for programs installation from device memeory to SD?
Use cabinst (search on google) to install cabs from PPC to different folders - essential tool!
You need registry tweaks to change the default folder, although this isn't really advisable. See Tweaks2k (i think) for this. But with cabinst, not required!
V
Thanks!
If I understand well... I have to install at first cabinstl on my Jam and after that I must use .cab installation!!? (I have to copy cab file in to particolar path of SD or?)
Using .exe install is not possible?
The .exes you download from sites wil (almost always) be for installation on the PC. You double click that, that'll load up activesync and install that way.
The other way is to copy the .cab to your pocketpc and double click. That will install, but gives little control over custom folders to install to and will also delete the .cab after install.
However, after installing cabinst you can double click on .cabs on the PPC and install anywhere.
V
Yeah! With cabinst I can instll app on my own "Program Files" dir in SD...
That's nice but I can't find all the app I have to install in CAB format so... my question is if is there any method to put the files on a specific dir from .exe installation..
Many thanks guys!
if you've got the .exe for the pc, double click it WITHOUT your pda connected. Activesync will load up and you'll get the Add/remove programs screen, saying the program will be installed next time you connect your pda.
Then, on your pc, you have to hunt around for the cab.
I use a program called filetracer to find files, but generally try looking in (I think, I'm not in front of my pc right now) C:\program files\Microsoft active sync\ (or something like that). There you should find folders, eg
\spb\Weather Panel (that's not a real example!).
Dig through there, and you should find eg
Arm_VJStuff.cab.
This is the file you need.
Sometimes you'll get a bunch of numbered files. eg If you see one like
2577_vjstuff.cab amongst other numbered files, the 2577 is the one you want (2577 refers to ARM, the chip in your PDA).
Copy that cab file to your desktop or wherever you want to store it, and copy a copy to your PDA. When you connect up your PDA activesync will ask if you want to install the installation you aborted earlier. Just cancel it.
From there, just install on your PDA with cabinst!
Sounds complicated, but you'll get the hang of it very quickly!
I keep all of my cabs in a folder for installation from hardreset very quickly.
V
Sounds good!!! :wink:
Thanks!
How to install cab files from a vista pc to my ppc?
previously i was using "cab via activesync" program in xp
If u know any program plz let me know.
I dont want to copy each n every program manually..its very difficult.
Plz help me..its very urgent..my pda got hard reset..
sathya said:
How to install cab files from a vista pc to my ppc?
previously i was using "cab via activesync" program in xp
If u know any program plz let me know.
I dont want to copy each n every program manually..its very difficult.
Plz help me..its very urgent..my pda got hard reset..
Click to expand...
Click to collapse
You can use My Mobiler.
With this program, you can display your PPC screen on your PC, and simply drag and drop CAB-files to your PPC. Don't forget to delete CAB-files after install, cause they are copied to \My Documents folder.
Why aren't you using the Windows Mobile Device Center from Microsoft? It's the Vista replacement for ActiveSync and supports all of it's old features and more.
Just drag n drop the CAB's to your device and install as normal...
Thanks for replying but it will be the same..i have to go delete once again the installed cab files n more over the cab files will be installed to the default installation directory even though there r programs to change the destination to storage card..the procedure is hecktic n tiresome
Depends on your target device really. In WM6 on my Kaiser, the device asks where I want the program to be installed to. And the file not auto-deleting afterwards is just a registry setting.
FloatingFatMan said:
Depends on your target device really. In WM6 on my Kaiser, the device asks where I want the program to be installed to. And the file not auto-deleting afterwards is just a registry setting.
Click to expand...
Click to collapse
I have o2 XDA II mini running on WM2003SE....it really dosent matter which device coz there r many free programs for ppc to change the default installation directory..
but i want to install directly from my pc coz its damn easy to install many programs..
sathya said:
I have o2 XDA II mini running on WM2003SE....it really dosent matter which device coz there r many free programs for ppc to change the default installation directory..
but i want to install directly from my pc coz its damn easy to install many programs..
Click to expand...
Click to collapse
Then try to find the programs that have exe files and run them from your computer. This will be a lot easier to accomplish.
I understand what you mean... i used to install CAB files directly from my PC, i just connect my phone to my pc and i double click cab files in my pc and it install to my phone BUT unfortunately I formatted my PC and I cant find the CAB installer again.. i think i found it in HERMES forum, until now im searching but without luck!
Is there any program that creates a setup.exe file from a .cab file that works on vista?
When i had my pc with Windows XP i used PocketSetupCreator but unfortunaly it doesnt works on Vista!
wow another thread on this...but u can just copy the files on your memory either phone or card and then install and there are ways to make it so that the cab file will delete itself after u install it...whats wrong with that
bapssystupr3m3 said:
wow another thread on this...but u can just copy the files on your memory either phone or card and then install and there are ways to make it so that the cab file will delete itself after u install it...whats wrong with that
Click to expand...
Click to collapse
Ya another thread on this just becoz the problem is not solved..plz read the thread from the beginning..we know to copy cab files manually to ppc n instal but we r looking to install directly for pc to ppc without copying.
Any solutions friends
cabviaactivesync does the trick
http://www.modaco.com/content/windo...-0-compatible-cabviaactivesync-now-available/
As mentioned before, you can set .cab files to auto-delete after install, with that set, use MyMobiler to drag and drop the file, and your done.
feridoun said:
cabviaactivesync does the trick
http://www.modaco.com/content/windo...-0-compatible-cabviaactivesync-now-available/
Click to expand...
Click to collapse
Pefect, I didn't realise this had been fixed. I had problems getting it to work on Vista the last few times I tried it. This is a great time saver for when I just need to install something quickly .
Okay it says its a cab. While I am very new to wm phones I have been able to install a ton of other cabs.
When I go to install this fist off it doesnt look like a cab it has the name and the windows flag and .rar as the extension.
When I click on it I get the following.
There is no application associated with "s2u2-0.3-WM5". Run the application first, then open this file within the application.
This is supposed to work with WM6 and I know others here have done it. I am just not so bright when it comes to this and cannot figure out what I am doing wrong. I tried just copying it into the windows folder but that didnt work either.
You have to extract the rar file to get the cab file inside for installation. Pls try again.
thanks
thanks mate works like a charm
I have access the to the files through WINRAR and can change the pics with Minila Editor. But How does one package them for install through a .cab file?
i hav downloaded packages_creator5.exe and also have the msceint.exe file in the same folder as i installed the ervius program, but how on earth does one put it together to work?
Please teach me?
Well there are a few ways to create .cab files but one quick method would be to use a program called QuickCab... Very easy to use it walks you though the process, makes life a whole lot easier if you are new to it.
go here ---> http://forum.xda-developers.com/showthread.php?t=400221
ProphecyXR said:
Well there are a few ways to create .cab files but one quick method would be to use a program called QuickCab... Very easy to use it walks you though the process, makes life a whole lot easier if you are new to it.
go here ---> http://forum.xda-developers.com/showthread.php?t=400221
Click to expand...
Click to collapse
looks promising, thanks, BUT, only that it says "cannot find Cab file, here it is the output from CabWiz:
Windows CE CAB Wizard
Error: Section [DefultInstall] key "CESetupDLL" - file "setup.xml is not a DLL so cannot be used as the special Setup.DLL"
solution? what did i do wrong?
went through installation it but no difference is made, it did not show the 'restart device' either. what is the 'setup.dll file for, where do i find such a file or what are the settings ?
HTCDiamond22 said:
went through installation it but no difference is made, it did not show the 'restart device' either. what is the 'setup.dll file for, where do i find such a file or what are the settings ?
Click to expand...
Click to collapse
hmm...
So you are trying to package some manila files to a cab file, so that you can install it on the phone.. right?
start QuickCab
Enter Application Name and Author(you)...
Don't check 'use custom setup.dll
Next->
Chose witch files to have in the cab ( Add-> ) to windows dir
Next->
No registry edit!
Create...
This works fine for me...
and about the 'restart device'... I don't know how to set it... on some cabs it says it ond on some it dont..
NisseDILLIGAF said:
hmm...
So you are trying to package some manila files to a cab file, so that you can install it on the phone.. right?
start QuickCab
Enter Application Name and Author(you)...
Don't check 'use custom setup.dll
Next->
Chose witch files to have in the cab ( Add-> ) to windows dir
Next->
No registry edit!
Create...
This works fine for me...
and about the 'restart device'... I don't know how to set it... on some cabs it says it ond on some it dont..
Click to expand...
Click to collapse
I've done that but it still does not work, I think that it may be the files i selected, should one only place in the files as showed in manilla?
no extra files to be added?
HTCDiamond22 said:
I've done that but it still does not work, I think that it may be the files i selected, should one only place in the files as showed in manilla?
no extra files to be added?
Click to expand...
Click to collapse
ok... where does it go wrong? on your computer or on the phone?
because you first say that Cabwiz is giving you an error and then you say that you cant install on the phone?
If it doesn't say that you have to restart our phone... just restart it yourself
...and you have .Net Framework 2.0? (on your computer)
NisseDILLIGAF said:
ok... where does it go wrong? on your computer or on the phone?
because you first say that Cabwiz is giving you an error and then you say that you cant install on the phone?
If it doesn't say that you have to restart our phone... just restart it yourself
...and you have .Net Framework 2.0? (on your computer)
Click to expand...
Click to collapse
.Net 3.5
I've uninstalled all the clocks and have restarted, going to try again
I've uploaded the file, does it work?
restarted device and reinstalled. still not working
aha .. ok.. now I see your problem...
You can't extract the files directly from a cab file with ex. winrar....
They will end up like this ... '4E6705~1.002'
use package-creator-v2.7 if you want to extract the files from a cab...
you can find it here...
http://forum.xda-developers.com/showthread.php?t=388883
Just run that and press 'Open Cab file'