About 9 months ago a colleague (also active on this forum) installed WM6 Black on my Vario 2. Today I tried to share the internet connection (for the first time), but to do this I have to be connected with Activesync.
I installed ActiveSync and connected my Vario2 to my computer (Win XP) using a USB cable. There was no response from the computer at all when I plugged in the cable and also Activesync "Get connected" wizard couldn't connect to the device. It did tell me that USB is available.
The only indication of the connection is the orange light that tells me the battery is charging.
Since there are no messages that give me any idea about what's going on, I have no clue what to do next. Also, I tried two different cables, which work with other devices.
Can somebody please help me out? I have to move places tomorrow and won't have a wired connected for about 6 weeks. I don't think I will survive without a internet connection
Related
:roll:
My Mini XDA can't connect to my PC via USB cable anymore, it can only recharge the battery.
My iPaq connects flawlessly, so it's not my PC.
Any suggestion ???
Mine does not connect after been run even a little bit. However if I do a soft reset and connect to the usb cable it seems to hook up right away. Whe I first got it it did not have any problems like this and I would like to fix it if possible.
I get a rather frustrating mesaage when I connect my O2 Exec via the USB port. It takes about 3 time before the connection with the comp finally happen.
The message is - 'USB Device not recognised' ' One of the USB devices has malfunctioned ........'.
Does anybody else have this problem and can anybody help?
Yep
I get the same problem but only with one PC. It happens on either USB port and is not helped by adding a USB hub. As such i am investigating the problem as if it is PC based.
Is this with ActiveSync or CardExport? Either way try rebooting PC first, wait for it to finish loading Windows. Power off your Universal, connect cable to Universal and PC then power on Universal. Seems to work okay for me. If you are using CardExport, remember you can't change modes while connected.
Regards
I have an O2 xda mini and that connects first time every time.
Found it strange that the Exec did not do same!
I have this on one PC - make sure the XDA is turned off first. Then plug the USB cable in and it should power up by itself and get recognised by the PC.
Also make sure you are using the very latest ActivSync (4.1 I believe).
Thanks lads - connect the cable while the Exec was off and it cobnnects first time. Good stuff!!
Why is that?
I think its the phone not the pc that is at fault, as i had a usb car charger and a usb power charger, both using a standard usb lead and the same fault applies, obviously just charging, AS wouldnt happen would it lol.
me missus just got a wizard and none of these faults occur on it
I concur that the plugging in USB while Uni is switched off is much more successful. Can I check with you guys - can you activesync by USB while bluetooth is on? I've not been successful with that.
V
i need help with my bluetooth connection between my laptop and my mda.
i purchased a kensington usb bluetooth adapter for my laptop to connect to my mda. my laptop detects the mda but laptop is assigning the connection to com port 5 however the mda only allows for com port 6 or 7.
question is how do i make my computer assign a different com port??
please help me!!!
anyone? anyone?
World o' hurt
The only solution I found to this was to delete activesync from my pc -- no mean feat because it is always running, search for "activesynctoggle.exe" -- and delete the partnership and start over, choosing the right com port on the PC the next time.
But that never fixed the ultimate problem, which is that bluetooth would sync once, and then not again until I shut down and restarted my laptop. I finally gave up, as it worked pretty much flawlessly with a usb cable.
I've just bought a laptop with integral bluetooth and I'm hoping that it will sync with bluetooth.
Hey guys - new here
Recently, my 8525 will not be detected by windows when connected to my PC; it doesn't even charge. It also doesn't charge even when connected to the AC adapter.
Other then that it works fine. The ROM I'm currently using is Final Storm v2.10, but I don't think this is the issue. I was able to connect and sync via usb for a while, and I am still able to sync via bluetooth.
I'd be extremely grateful for anyones thoughts on this issue.
my money is on a broken cable or connector
I have had same problem occasionally.
Check that "advanced Network Functionality" is not checked. Depending on the ROM, I think its an Activesync option, or under 'connections' tab under settings, called "USB to PC"
Hope that works.
B.Ellis
I`ve TYTN and one day it stopped sychro via cable...
I plug cable - its starting charging but ASych stay absolutly quite (any notification any problem connecting) . Like I didnt plug cable
Ive made a Hrd reset , change cable but situation tha same .
any solution, please.
Did you reboot your pc? Did you try another USB device (USB port broken)? Did you reinstall activesync?
That's what i would try....
Try reinstall the active sync software. maybe the usb driver was corrupted
Because it can charge,so maybe the cable is OK( and the voltage is enough, some cable with too much voltage lose will not give enough current when pluged so that can not charge ) , problem should be of the software.
Besure if you have multi user environment. Only one user can use Activesync on Windows XP platform.
Do reinstall Activesync and do check the usb cable with any other computer nearby you if you are not living in desert.
I actually am having a similar problem connecting my AT&T 8525 to my computer. It charges, but won't sync. I had to start using Bluetooth in order to connect.
on the tytn go to settings -> connections -> usb to pc and untick the box