guys i think i might be in deep ****. i installed a software called pocketdivx on my exec. when i tried to play any avi or divx files i got an error like 'wave audio error'. i tried uninstalling it but it could not be removed completely. now the situation is that i m stuck with it...my media player wont play any mp3 files since they are now attached to the pocketdivx. plz help....
You can either try to fix the assosiations in media player, its in the options some where,
or, you could do a hard rest. this will remove all the data and any programs you have installed, so make sure you have a recent sync and a backup.
OK, here's the backround info. My wife uses her T-Mobile MDA to log onto her jobs email server via EDGE. Her voice mails are automatically sent to her email, and she's been able to check her email on her MDA and be able to play them in the media player. All of a sudden, she says she's now getting an error message saying that a component is missing (I don't have the phone with me now). So, she calls me and asks me what I did to her phone. I have no idea what would cause this to stop working. Can someone help me brain storm? I know I should have the phone with me to describe exactly what the message is but I'm not able to get it from her at the moment. Just trying to think of some possible reasons.
Her phone is using the original T-Mobile USA ROM, we just added the following programs recently: 1) NoteM (which didn't work properly) 2) TodayAgenda 3) Smartbutton 4) Oxios Hibernate.
I also removed two programs: some T-Mobile Hot Spot manager (never uses wifi) and the other, I can't remember what it was. It was sofware that's been on the phone since we bought it new but I didn't think she needed it. I can't remember what it is for the life of me.
So, if someone has a suggestion, please let me know. Also, is there a list of all programs that came stock on the MDA?
OK. This is the error message I get when I try to download the WAV file for the voice mail: "The file 'VOICEATT' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file."
It let's me download the file now but when I try to play it, I get the message above. Also, the file just has a generic white piece of paper look to it with the MS icon in the middle. She says this was working fine before, it just stoped working this week. BTW, I also added .NET Framework to her device last week as well. Added this because I couldn't get Smart button to work without it. She said it used to open in the Media player, no problems. Any ideas what might be causing this? Looks like the file is not recognized anymore.
Also, I just downloaded the same file to my Artemis and it shows up as a windows wave file icon. No problems playing it on my desktop or my phone. But the MDA will not recognize the file no matter what. What's even more strange is that I can play the file with MS Notes? It still has the same generic icon, but I can play the files in Notes, but not in WMP. What could have caused WMP to stop recognizing wave files? I can still play her MP3 on her storage card in WMP though.
Also, I added a Security Prompt Bug Fix to turn off the security. Before I added this, it wouldn't even let me download the file. Now it downloads but I just can't play it.
shawndh said:
OK. This is the error message I get when I try to download the WAV file for the voice mail: "The file 'VOICEATT' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file."
It let's me download the file now but when I try to play it, I get the message above. Also, the file just has a generic white piece of paper look to it with the MS icon in the middle. She says this was working fine before, it just stoped working this week. BTW, I also added .NET Framework to her device last week as well. Added this because I couldn't get Smart button to work without it. She said it used to open in the Media player, no problems. Any ideas what might be causing this? Looks like the file is not recognized anymore.
Also, I just downloaded the same file to my Artemis and it shows up as a windows wave file icon. No problems playing it on my desktop or my phone. But the MDA will not recognize the file no matter what. What's even more strange is that I can play the file with MS Notes? It still has the same generic icon, but I can play the files in Notes, but not in WMP. What could have caused WMP to stop recognizing wave files? I can still play her MP3 on her storage card in WMP though.
Also, I added a Security Prompt Bug Fix to turn off the security. Before I added this, it wouldn't even let me download the file. Now it downloads but I just can't play it.
Click to expand...
Click to collapse
we just went to avaya voip at work and now get VMs in our email as well. i had the same issue, and couldnt figure out why WMP couldnt play WAV files... doesnt make sense. but anyways i installed TCMP (http://www.freewareppc.com/multimedia/tcpmp.shtml) and set it to be the default player for everything... when opening up wav files it still says unsupported codec. what the hell can it play if it can't play wav files? i ended up going to a different WM6 build where WMP would work (tested it just now). so the only thing i can suggest is finding a CAB for WMP and installing again or play around with the ten million WM6 builds...
ndn715 said:
we just went to avaya voip at work and now get VMs in our email as well. i had the same issue, and couldnt figure out why WMP couldnt play WAV files... doesnt make sense. but anyways i installed TCMP (http://www.freewareppc.com/multimedia/tcpmp.shtml) and set it to be the default player for everything... when opening up wav files it still says unsupported codec. what the hell can it play if it can't play wav files? i ended up going to a different WM6 build where WMP would work (tested it just now). so the only thing i can suggest is finding a CAB for WMP and installing again or play around with the ten million WM6 builds...
Click to expand...
Click to collapse
I downloaded Conduits Meda Player and it plays the files but it wont automatically play the files when you click on them. I could not find a setting that would make it automatically open and play the file - it would just open the program. Then you had to open the folder where the file was stored. Since I also discovered that the Notes program would play the WAV files, I just uninstalled the Conduits prog, and now I'm having my wife just use notes instead. It's a little cumbersome, but until I can find a media player that can open automatically and play the darn files, may as well use Notes.
shawndh said:
I downloaded Conduits Meda Player and it plays the files but it wont automatically play the files when you click on them. I could not find a setting that would make it automatically open and play the file - it would just open the program. Then you had to open the folder where the file was stored. Since I also discovered that the Notes program would play the WAV files, I just uninstalled the Conduits prog, and now I'm having my wife just use notes instead. It's a little cumbersome, but until I can find a media player that can open automatically and play the darn files, may as well use Notes.
Click to expand...
Click to collapse
Since audio is basically all you need, try this great little app. This is the updated version, and has a settings option to play at open.
Enjoy!
8125
2.25.11.1
shawndh said:
I downloaded Conduits Meda Player and it plays the files but it wont automatically play the files when you click on them. I could not find a setting that would make it automatically open and play the file - it would just open the program. Then you had to open the folder where the file was stored. Since I also discovered that the Notes program would play the WAV files, I just uninstalled the Conduits prog, and now I'm having my wife just use notes instead. It's a little cumbersome, but until I can find a media player that can open automatically and play the darn files, may as well use Notes.
Click to expand...
Click to collapse
By the way TCPMP does have a setting to "play at open"
In TCPMP go to Options>settings
[pict1]
Select page>player check box at play at open. Tap OK [pict2]
I just recently downloaded the manilla2d program and whenever i try to open up youtube and play a video, it says error cannot play this video. Is there any way to fix this? Also is there any way to get the music tab working, I have tried installing the kaiser audio manager, and then the opal one, but it still doesn't work, it just says searching and nothing opens or anything, even when I try to open audio manager from the start menu it doesn't open, is there any way to maybe integrate this with S2P instead?
For now all support on this product is being done thru the thread where you downloaded it from. Until they finalize a stable version, I would recommend asking all of your questions to that thread.
BTC
Here's the YouTube fix
http://forum.xda-developers.com/showpost.php?p=2657501&postcount=164
Ive tried that youtube fix myself, for my mogul and i still get the same response when trying to view a video. "cannot play video"
I installed the program Sun High MediaPlayer but it didn't work. So, I then tried to remove the software without success.
Now my windows media player doesn't want to launch. So, I tried to install the core player but it doesn't launch either. Worse it froze my device and I have to soft reset!
Then, I downloaded a cab file (SJ WMP_10) on xda to reinstall wmp ... but I get the message that it doesn't have the authorization to install and then the device froze and I have to soft reset! Ouch!
Can somebody help me:
1) to recover my wmp?
2) recommend a player for mp4 files
thanks a lot and happy new year!
it looks to me like that Sun Player has damaged some of the windows media library... if you havn't got much on your hd, maybe hard reseting will be faster than trying to find a solution?
Hard reset was indeed the solution. Thanks.
Hi,
Pardon me if I am wrong, but I am sure I could play video straight from the hero when I first got it. Today I was trying to play the demo video that comes with the SD card and couldn't (Astro file manager says "No Activity is available to display this file type"! Looks like I've accidentally uninstalled the default one (I had installed Meridian and Video Player from the market and then uninstalled them).
Can you guide me on how to restore it?
Ah sorry got it.. Meridian had defaulted itself on Astro.. clicked on "Open As" and "Video" and it worked!
Edit: Still can't open videos by directly clicking on them in Astro. Have to go through Open As. Any workaround guys?