When I go into the Device Information on my 8525 Under the Version Tab, both Radio Version: and Protocol version: are blank and under my Identity Tab, the IMEI is blank. The phone part of my 8525 won't work, it will say " cannot complete the call the signal may be unavailable" If I go into SIM Manager it will say "Unknown SIM status". And "Only emergency calls can be made without a PIN”.
Where do I need to start? Don’t I need a Radio version on my phone?
Everything else seems to work OK!
Related
Just obtained from ebay T-Mobile PPC Rom Ver: 3.08.10 ENG, Rom Date: 07/11/02, Radio Ver: 6.02, Protocal Ver: 324e4, CPU: ARMSA11110, Model: PW10B1, came with no sim card. Looking to unlock, which would best to use from here. Also how do it find what Bootloader version is on it and where or not the PPC2002 version I have is modem capiable? :lol: :roll:
to unlock, download the xda unlock tool from www.xda-developers.com/XDAunlock/ and run it on your xda.
the modem s/w is named wmodem.exe and you should find its link under programs.
good luck ...
opps! ... you can get the boorloader screen by pressing soft reset while pressing and holding the power button.
XDAunlock .exe
Ran this and got the following: error getting unlock code. What would cause this? :roll:
Could this be that this does not have a modem.
Or maybe this is the problem:
To Find Your Current ROM Version:
Select Start -> Settings -> System and choose the Device Information icon.
If your device is running 3.08.10, you should upgrade.
A full list of benefits of the upgrade is contained in the release notes.
Pocket PC Phone Edition Download Center:
To download the current upgrade software (15.9MB), please enter your 10 digit valid T-Mobile phone number:
Hi
everyone does anybody have this problem the Xda Exec sometimes loss the network signal and then it does not connect to the network until you do a soft rest or go in to flight mode and back out and then it pick up the network.
I've try diffrent settings like connecting to the network manually does not work automatically some thing, any help.
The radio version that I have is 1.04.02
The Rom version is 1.13.48 WWE
The protocol version is 42.37.P8
The ExtRom Version is 1.13.139WWE
Thank you Gigino
Hello, I upgraded to Explode latest WM6. ROM. Whenever I receive a phone call, I press the answer key , my phone displays a message " The signal may not be availble try later". However, the signal indicator shows full four bars. Now if I try to make a call the phone displays " operation failed" . Only after soft reseting the phone,I am able to receive or make phone calls . What is the problem?
Cingular SX66
ROM Version: 6.00.00.WWE
ROM date: 03/02/05
Radio version: 1.15.00
Protocal version:1337.45
ExtROM:
Hi. This will most definitely sound noob, but I have to ask in order to upgrade my omnia 7 8GB:
I bought my Omnia 7 a week ago, in Serbia and it is (apparently) "taken" from the Hungarian T Mobile (the logo screen is there) but it is carrier unlocked because I can put any SIM card and it works. At first there were problems like not displaying the sms and e-mail messages, and when I changed the "System locale" language and stuff it couldn't connect to the internet via Internet Explorer (I left it to Hungarian, so now it does). i also did the "Reset your phone" option in the settings -> about menu and the SMS and E-mails are now fine, BUT, I don't understand how to wake up the phone when it's on standby because sometimes the only way to wake it is by pressing the power button (at first I thought the WINDOWS button was non-responsive, but I was wrong). I even tried the download screen and hard reset screen (combo of keys) and while the Download mode is O.K. (I guess 'cos it displays the triangle screen) the Hard REST SCREEN seems to be faulty because it lasts only for a half a second and then the phone restarts without even letting me choose whether to reset or not?!?!
I still haven't even connected it to Zune. I've downloaded the MS Windos Phone Dev tools (the 400 MB package) on Windows 7, but waht to do next.
I also don't understand entirely what is 'firmware', what is 'ROM' (i know in other devices that the firmware is something like BIOS, but ROM can also be some oprating system, right?) and 'CSC (I know it has to do with the country selection) and which update contains what, and so on> I mean I've read the forums and I know what is to developer-unlock and carrier-unlock (sorta), and I'm getting along with OSes since the ZX Spectrum's basic - upto Ipad's iOS4, but I don't know what to do. I want to developer unlock it, to update to NoDo, or even Mango, and to try to sideload homebrew apps WITHOUT relocking and WITHOUT BRanding it (or carriel-lock it). Because the firmware and all are pretty old, what should I do first: flash the phone, or update via Zune or do the Chevron or something else 'cos I'm afraid if it can't be upgraded or if there may be some issues. PLEASE HELP and sorry 2 bother U guys
Thanx in advance
My firmware and everything is pretty old from what I've seen so far:
OS version: 7.0.7004.0
Firmware revision number: 2424.10.10.4
Hardware revision number: 3.15.0.4
Radio software version: 2424.10.10.3
Radio hardware version: 0.0.0.800
Bootloader version: 4.10.1.2 (this is pretty old, right?)
Chip SOC version: 0.36.2.0
and the Diagnosis data:
Diagnosis (ver.0929)
PDA: I8700XXJJ4
Phone: I8700XXJJ3
CSC: I8700TMHJJ4 (NOTE: the TMH isn't mentioned anywhere on the web but I think it's TMobile HU)
Bluetooth S/W: 0.01
Bluetooth H/W: 0.01
Bluetooth MAC: bla bla bla
Wi-Fi S/W: 1.0
Wi-Fi H/W: 1.0
Wi-Fi MAC: bla bla bla
O.K. So I couldn't wait and unlocked the phone with Chevron. It worked O.K. and Zune installed the update 7008. After that I even deployed a .xap (it worked ). When I tried to deploy again it started O.K. but then it said something like "The port to comunicate is not a socket" or smt like that. Then, I noticed that Zune warned me that another update was ready (the 7392) and started and went well until the last step when it said "update fail, error code 801812dd". I googled and found that that may be because of the USB cable / port (I have the original cable). So I connected the phone to a USB port at the back of my PC, but Zune doesn't recognise any updateds any more? What should I do? Thanx in advance
Well, I figured it out. I DID IT, I installed the 7392 update. It works like a charm. It even updated my bootloader and what not. Thanx guys, you're awesome, but mostly thank to those who tried to explain the stuff in a more simple manner, for us, the beginners.
My new stats:
OS version: 7.0.7392.0
Firmware revision number: 2424.11.2.3
Hardware revision number: 3.15.0.4
Radio software version: 2424.11.2.2
Radio hardware version: 0.0.0.800
Bootloader version: 5.2.1.4
Chip SOC version: 0.36.2.0
and the Diagnosis data:
Diagnosis (ver.0929)
PDA: I8700XXKB3
Phone: I8700XXKB2
CSC: I8700TMHKB3 (NOTE: the TMH isn't mentioned anywhere on the web but I think it's TMobile HU)
Bluetooth S/W: 0.01
Bluetooth H/W: 0.01
Bluetooth MAC: bla bla bla
Wi-Fi S/W: 1.0
Wi-Fi H/W: 1.0
Wi-Fi MAC: bla bla bla
(Noob here)
My phone can't connect to mobile network. I tried reflashing the stock and many other roms, trying a new sim card. (I'm currectly on RR-OS 5.8.6)
----
ALE-L21
Baseband version: 22.355.03.00.00
----
*#*#4636#*#*:
IMEI: ******(not blacklisted)
Phone number: blank
Currect network: blank
...
Voice service: Emergency calls only
Data service: disconnected
...
Voice Call status: Idle
...
I tried many network types none of them seems to work.
----
When i try to manually connect to a networks it says: "Can't connect to this network right now.Try again later."
If i try to call someone "Mobile network not available."
APNs are looking okay
Thanks for help, sorry for bad english.