Bluetooth Profiles - Networking

>I HOPE YOU MIGHT BE ABLE TO HELP OR GUIDE ME. > >I HAVE BEEN STRUGGLING FOR A YEAR DOING AN INTENSIVE BUT MOSTLY UNSUCCESSFUL RESEARCH TO SOLVE ONE PROBLEM: LACK OF BLUETOOTH COMPATIBILITY BETWEEN MY iMATE POCKET PC PHONE (http://www.clubimate.com/t-DETAILS_PPC.aspx) AND THE BLUETOOTH CAR KIT IN THE iDRIVE OF MY BMW 335i (2007).> >I HAVE CONTACTED BMW AND IMATE SUPPORT (BY EMAIL AND BY PHONE FROM MEXICO CITY) MANY TIMES WITHOUT SUCCESS. (AND MANY OTHER SITES)> >THE CLOSEST FIX TO MY PROBLEM WAS TO UPGRADE (http://forum.xda-developers.com/) THE iMATE POCKET PC PHONE ("HIMALAYA")2003 OPERATING SYSTEM TO WB 5 AND WB 6. I WAS SURPRISED THEY WERE FINALLY COMPATIBLE. UNFORTUNATELY THE FIX IS VERY UNSTABLE AND PRODUCED TOO MANY SERIOUS PROBLEMS IN MY DEVICE.>A FRIEND LENDED ME A IMATE JASJAR AND IT WORKED FINE WITH MY BMW. OTHER CELLULAR PHONES HAVE ALSO WORKED FINE>>ALSO INSTALLED A DOWNLOAD (http://bluetooth.i-networx.de/index_e.html) THAT SUPPOSED TO FIX IT BUT DID NOT WORKED. I FOUND THIS DOWNLOAD FROM (http://wiki.xda-developers.com/index.php?pagename=HimalayaFAQ) WHERE IT IS EXPLAINED "HIMALAYA" IS MISSING THE NECESSARY PROFILES.> >I THINK THERE SHOULD BE A POSSIBILITY OF "EXTRACTING" THE NECESSARY BLUETOOTH PROFILES-STACKS-BUNDLES TO DOWNLOAD TO MY DEVICE.> >IS THERE ANYTHING YOU CAN DO TO HELP ME?

Please rewrite the whole thing. (don't use caps)

Related

Bluetooth connection with BMW 520i

I have I-mate , and updated to ver 1.52 , i try to connect it with the BMW car bluetooth , they can see each other but the car can not bound the i-mate , any body try this , or is there a patch tor that.
any help
I'd like to...if anyone has a BMW 520i to donate i'll be willing to have a go!!
Sorry i couldn't be more helpful....i just couldn't resist.
Yes There is a solution Ali!!
First backup your device
Goto www.clubimate.com
Register Your device
Then you would head to the support section
And download the latest ROM upgrade which is approximately 40 MB
Upgrade your device since the new ROM is said to have a new fix for bluetooth.
And if this works ........ Please Donate !! (Just kidding !!)
if i am not mistaken, the bmw carkit is the same as the parrot ck3000...if so you have a problem (for the moment anyway)
the parrot ck3000 works with the handsfree profile of a bluetooth phone, and the xda2,qtek2020,i-mate and all the other names for our machine only works the headset-profile....it is no use of trying to upgrade the carkit, mine has the latest software, and still does not work...the upgrade has to come from your pda, that has to support the handsfree profile...as i heard, there should be one comming out in the first few months...let's hope...
thanks for the help
i update the i-mate before from the clubimate but as you said no help at all it is the same problem
if problem solved will donate sample bmw logo from the company
To ali:
Simply: NO WAY. Nor will BMW support you in any way: You will not get (in written) even the list of supported phones. They just claim it's lack of Bluetooth standardization (Wich is not completly false...).
BTW, I've found the hard way that BMW cars only support Handsfree profile (No headset), BUT, not on every phone model, and not all features....
If you are interested:
1- Ericsson and Sony-Ericsson T68 models: They work on the handsfree part of the Bonding, but you will not get your phone contact list automatically passed onto the car kit phone system. You may pass contacts one at a time (tedious and time consumming).
2- SE P800: My biggest disappointement, they do not even pair reliably, no contact list at all, connection breaks with no apparent reason.
3- Siemens S-55: The BMW preferred one (Both Germans, I guess....), to no avail. Same behaviour as SE T68, and although the contact list is supposed to be passed automatically it doesn't. When tried manually, it stops at about 6 or 7 contacts and the phone hangs.
4- XDAII: The BT part is SO POORLY implemented, it should have been even removed from the reviews on the forums.

Desperately in Need of Help Getting my XDAIIi Stable!!!....

...Or Should I ash my XDAIIi against a rock!! :shock: I recently upgraded to an XDAIIi (after 5 years iPAQ) :shock: right away there were problems and I sent one device back. The new device I upgrade the Rom and BT stack with the Modified_XDA_IIi_Upgrade_v1.11.162_Radio_1.04 and Broadcom Corporation BT-PPC AV files from this site. And of course not installed the O2 rubbish.
This did seem to help some. I am finding the XDAIIi to be very finicky. To the point I am asking myself if it is worth the hassle. My main issues (the ones that’ll cause me to throw the XDAIIi at the wall) are:
The BT handsfree profile. Now I understand that the BT Stack is wanting in general and I am even willing to put up with the degraded audio quality (even with the upgraded stack) But my problem is that after a few days or installing new progs. the handsfree link is useless. There is a crackling sound in the ear and the other side can’t hear anything.
To top it off! When I do a restore from a backup done just 10 minutes earlier when the BT stack was working does not eradicate the problem. Only a hard reset and rebuild will reset it. Even if I do a hard reset and then a backup the BT stack doesn’t work. Re-installing the BT Files doesn’t seem to help either.
If it is possible to actually get this thing working I would also like to know how to delete the O2 ext. ROM and replace it with a working backup/ cab installers of my own. So that in event the system needs a rebuild I can just hard reset and have all my program and setting restore (like the O2 stuff does). I can always leave backup of the contact data on card.
If it helps: I have a Jabra BT500 headset (it works a charm with any normal mobile phone I introduce to it to and even works with my PC, but be darned if it knows what my XDAIIi wants from it…)
Also I using the following programs (Although I have yet to isolate the problem to a specific program):
AgendaFusion (DeveloperOne)
Tengo & TengoThumb (Xrgomics)
RemoteKeyboard (TranCreative)
PhoneAlarm & ScreenGuard (PocketMax)
MultiIE (Southway)
PhoneDashboard and IPdashboard (Hudson Mobile)
WISbar Advance2 (this one may in general be problematic with the XDAIIi – I don’t know)
Thank you
Josh Engle

Anyone got Sim Access Profile working?

Hi
I wondered if anyone had successfully used the Sim Access Profile capabilkity of the of TyTn to connect with a Bluetooth car kit. I'm trying to get the connection going with a Merc. car kit, but I can't get them to pair.
Thx
Hi petes, I have an slk 55 amg with command and bluetooth. The bluetooth in the command system does not work for pairing with a phone. Even though it says it has bluetooth. To use bluetooth you need an extra module.
Hope this helps...
http://www.benzworld.org/forums/r17...y-arrived-but.html?highlight=bluetooth+module
http://www.wireless4mb.com/phones.html
http://www.benzworld.org/forums/r17...pic-seems-kit.html?highlight=bluetooth+module
Hi Dale
Thanks. I actually already have the module - the european version of the module is different to the US one in that it uses Sim Access Profile, rather than just acting as a headset. The TyTn says is supports SAP, but I just can't make it work - wondering if anyone's actually got SAP working.
pete S
Hi Petes,
I also have an Mercedes-Benz with the european bluetooth module. But I have a Qtek 9100 updated to AKU2 (Which is supposed to support SAP), but no luck at all. Actually the module can not even identify my phone and display it at the search screen of the comand screen. I tried also with a NOKIA 6230i (SAP Compatible phone) which actually I was able to see at the search list of the comand screen which means that the module is working with SAP compatible phones. What I will do next, is to try again with the new firmware I installed to my 9100 (T-Mobiles 2.21 Version) which has a SAP application for bluetooth (Something like SAP Server).
I can not do it yet because I am abroad and I will be back again 1st of September. I will let you know the results ASAP.
If you have any news from your site with TyTn please let me know because I was intending to change my 9100 to TyTn just for the SAP functionality.
Hi Barsam
The reason you can't find the 9100 when you search with the BT module is that it only looks for devices which identify themselves as Phones. The TyTn (and no doubt the 9100) identify themselves as Pocket PCs and so the (stupid!) Mercedes kit ignores them. The good news is that you can hack the registry to tell the Bluetooth stack that it's a phone. The bad news is that you can't pair with it. Getting it into the search screen doesn't mean it supports SAP - I could see my old T68 just when I was testing. Could you actually pair with the 6230i - i.e. when you see it in the list select Call?
When you're back, PM me and I'll send you the hack.
To tell you the truth I didn't try to pair the 6230i, but it's one of the phones that mercedes have tested on the bluetooth module. If I don't manage to do it with the 9100 I may get a 6230i. At least I can use the one that my brother has to test it and even copy my contacts to comand. Have you tried the hack with the TyTn? Can you tell me what is the the registry set to do that?
Where did you find out that the bluetooth module ignores enything elese than phones?
Make the following registry change
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS]
"COD"=dword:52020C
On your own head etc.. Keep a copy of the current value of course. Then do a soft reset. You'll then see it as a phone. I've tried this, and can now see the phone, but can't pair. I've had a mail back from HTC that they're aware of some problem with the SAP and are working on it.
I wish a nice car kit would be released in the USA that supports SAP/850 & 1900/ external aerial...
hello,
i'm trying to get my TyTN working with my Meceder Command too... does anyone tried the English ROM-Update? Someone wrote that he can use it's TyTN with his Audi after updating the ROM. And tha Audi-MMI-System works also with SAP... perhpas after the ROM-Update it works with Mecedes Command System too...
I haven't tried it yet - I've been waiting for the TyTn update to come along, but nothing from HTC yet. If I don't get anything soon, I'll switch over to the iMate ROM and report back.
I have used a nokia 6233 6280 onmy E55 2005 with B/t Module
The mercedes module in conjuntion with the command system is problimatic, hoever I think I have another peice of the puzzle. With both the above phones they only worked using Vodaphone 3g cards Three 3g cards paired using SAP however could not get recieption....Mercedes say (there guessing) its the way the sim card is configured.....
Mercedes BT
I have a TYTN on order and Im desperate to find a solution to the issue before it arrives.....
As a follow on to my last post ...basically what I THINK found out was if the sim card was configured to work only on a 3G phone..(some networks do this so that they cannot be put in a 2.5g phone and constantly roam on).....then it would pair with the Bluetooth module in Mercedes however never get recieption.
I tried this on several phones including 6233 6280 N80 E61.....just to name a few....ALL PAIRED....however If I put a Vodaofone 3g Card in then IT worked .....IF i put a Three 3G card in it didnt.....BUMMER CAUSE I'm with THREE.....
I hope this helps in some way and Im more than happy to be corrected however these are my first hand expeirnces....I WANT TO USED THE TYTN in my MErc so Im keen to help in amy way....I have unlimited access to phones...so if anyone has any other suggestions Im happy to give it a go....
Mark
At the moment, you'll find that by default the merc kit won't even see the Tytn (it's a pocket pc, not a phone as far as Bluetooth is concerned). You can hack the registry to change this, but then the phone will be seen, but pairing will fail. Hopefully, the forthcoming firmware update will fix this - I've had mail back from HTC support to suggest they know there are problems with the SAP support.
Mercedes BT
Is there anyone who had paired Nokia phones with Mercedes BT(euro spec) successfully? I had tried for several Nokia phones (6230i/6270/6280) to pair with BT ,all failed. I can just find the 16-digit PIN on Comand, no phone appears on Comand. Phone & Comand can't find each other. Do I have to set other setting except the "bluetooth setting" for mobile phone? Even I try to "search for audio enhancements" and 'find no devices' at all .
Thanks Petes,
Did they give any idea on time frames?...Did you have any thoughts about my experience with the different sim cards....
Mark
I am considering buying the HTC TyTN and the Merc Bluetooth module so I am very keen to know if anyone can get this working.
Thanks,
Ady
Nope - no news on timescales I'm afraid - just waiting for the firmware update from HTC. I'm reluctant to try the iMate firmware at the moment - until there's an HTC to go back to in case something goes awry. Has anyone had a chance to try SAP with either of the newer firmwares (iMate or Dopod) - might give us a good clue if the HTC one's going to work.
I've connected my 6230i easily enough, just remember to allow "auto connect without confirmation" on the phone after entering the 16 digit code
I have tried my HW6915 pocket pc but like the other PPC's it is not recognised
A reply I got from HTC support on 21/09/2006 asking about the Merc SAP problem was:
At present the TyTN is only compatable with a limited number of kits. A ROM update will be released shortly to update this.
Click to expand...
Click to collapse
So fingers crossed that it will be soon and solve the problem.
I asked them the same thing a while ago and just checked back in on availability. Just got ...
"At present the HTC ROM for the TyTN is being written and tested and we expect it to be released in the very near future."
So, patience is a virtue I hear....

TyTN Bluetooth | Random car disconnect

Hi all,
I know there are plenty of threads about the TyTN bluetooth issues, but my questions differs in two ways which I have yet to come across:
I do NOT have M$ VoiceCommander installed (and don't want to install it)
My bluetooth issue relates to my car's handsfree feature - my TyTN randomly connects and disconnects. Apparently Audis, VWs, BMWs, and Acura's all suffer from this this problem.
The situation:
When I start my car, the phone will successfully merge with my TyTN. Approximately 30 to 60 seconds later, the connection will be lost. Shortly after that the connection will re-establish itself, then it will disconnect itself a short period later. This pattern repeats endlessly.
I've tried each of the following Tweak programs but none have helped.
jetwaremobile
Tweak2k
HTweakC
I've heard that there is some kind of registry tweak that will prevent the bluetooth stack from disconnecting from my car's handsfree feature, but after looking for about 2 days now, I can't find it. Can anyone help?
thanks.
jm
Yep, got exactly the same on my BMW 630....
Can t find any tweak but....
I am a heavy email user (thru BlackBerry connect) and I noticed that
the higher the number of messages stored, the higher disconnections appears.
At the same time, the TyTn is slower and slower....so my idea that this is related to some timeouts somewhere....
For your complete info, the MS bluetooth stack in my previuos S100 have able to.....immobilize my 630 !!!!!!!!! yes, incredible...
The MS stack messed up with the BMW bt ...and this later would stay ON for ever...even after switching car s power off.
This was sucking the car s battery untill the car would start !...
BMW could not reset the BT module unless disconnecting battery....but...then the active steering had to be re adjusted with the proper BMW computer...
This is a real story.
johnmclean said:
Hi all,
I know there are plenty of threads about the TyTN bluetooth issues, but my questions differs in two ways which I have yet to come across:
I do NOT have M$ VoiceCommander installed (and don't want to install it)
My bluetooth issue relates to my car's handsfree feature - my TyTN randomly connects and disconnects. Apparently Audis, VWs, BMWs, and Acura's all suffer from this this problem.
The situation:
When I start my car, the phone will successfully merge with my TyTN. Approximately 30 to 60 seconds later, the connection will be lost. Shortly after that the connection will re-establish itself, then it will disconnect itself a short period later. This pattern repeats endlessly.
I've tried each of the following Tweak programs but none have helped.
jetwaremobile
Tweak2k
HTweakC
I've heard that there is some kind of registry tweak that will prevent the bluetooth stack from disconnecting from my car's handsfree feature, but after looking for about 2 days now, I can't find it. Can anyone help?
thanks.
jm
Click to expand...
Click to collapse
I have the same problem with a CK3100 kit, don't have a solution, but would like one, didn't have this problem with a Jasjar nor Wizard
TyTN bluetooth | random disconnect when using car handsfree - more details
Thanks for the replies so far.
Although the following thread did not help me with my problem, it might help one of you. If you're having problems mostly related to issuing voice commands using M$ VoiceCommander, I think there *might* be a solution in that other thread for you.
Just to reiterate my problem; my TyTN keeps randomly connecting and disconnecting from my car's built-in hands free bluetooth device.
There was a time when if i managed to made a call after first starting the car - before the first random disconnect - the phone would remain connected until the next time I started the car. That no longer appears to be the case.
-jm
I solved the BT problem with my Orange SPV M3100 by setting it to never switch off the display automatically (only switching off the backlight after 20 seconds or so). I also use an in-car charger to power the TyTN. The car is an A6 with RNS-E (BT enabled) and TyTN works fine and never loses the BT connection as long as the display is active.
This is a mid-term solution though and I'm still eagerly waiting for a ROM update that will solve the problem for good.
Has anyone tried a ROM with aku 3.3?
jasonrhcastle said:
Has anyone tried a ROM with aku 3.3?
Click to expand...
Click to collapse
Yes.
And on my CK3100 I now no longer get disconnects. I did have to uninstall jetware as it wasn't reliable. My TyTN now connects perfectly and no longer drops.
One thing I did find is that the TyTN hates it when more than one handsfree device is in its trusted list. Make sure that the ck3100 is the only handsfree device paired.
http://forum.xda-developers.com/showthread.php?t=247520&highlight=bluetooth+keeps+disconnecting
ajax007 said:
I solved the BT problem with my Orange SPV M3100 by setting it to never switch off the display automatically (only switching off the backlight after 20 seconds or so). I also use an in-car charger to power the TyTN. The car is an A6 with RNS-E (BT enabled) and TyTN works fine and never loses the BT connection as long as the display is active.
This is a mid-term solution though and I'm still eagerly waiting for a ROM update that will solve the problem for good.
Click to expand...
Click to collapse
I've tried changing the automatic switch off setting and it made no difference on my SPV M3100 (with Parrot CK3100) - I reckon that the external power is what fixed your problem (this has worked for others too).
Sadly it's not a convenient fix as I like to leave my phone in my pocket when I'm in and out of the car. Orange say there is no 'issue' so there's no sign of a ROM update but HTC know of the problem but I have to wait for Orange to release their ROM update. I can't use the HTC update. If only us Orange users could tell them enough times they might listen now that some AKU 3.3s are being released. Orange technical department won't speak to end users like me - they have actually refused to discuss it with me and just pass messages back and forth from customer relations. Any other ideas?
A solution - thanks to Parrot
Yippee - thanks to Parrot I have got a solution to the TYTN / CK3100 problem (my phone is the Orange SPV M3100).
As Orange and HTC can't find any solution I kept asking Parrot for ideas. Their excellent customer service department tried various settings which made no difference until I was offered a trial of some beta test software called VCF creator. Once you have the VCF from the PC's Outlook you just need to beam it by BT across to the CK3100 and alter some settings (takes 5 minutes maximum). The small sacrifice is that you don't have auto-synchronisation so if your numbers change a lot you will need to do another VCF upload. The extra bonus benefit is that all your numbers will be grouped together. So, for example, you access someones name and then you can see their mobile/home/work number rather than having a separate line in the main list for each phone number. The problem is a result of how Windows Mobile phones provide the data. With this bonus you can then use voice activation to input a name followed by a keyword mobile, home, work etc. Fantastic!
587dan said:
Yippee - thanks to Parrot I have got a solution to the TYTN / CK3100 problem (my phone is the Orange SPV M3100).
As Orange and HTC can't find any solution I kept asking Parrot for ideas. Their excellent customer service department tried various settings which made no difference until I was offered a trial of some beta test software called VCF creator. Once you have the VCF from the PC's Outlook you just need to beam it by BT across to the CK3100 and alter some settings (takes 5 minutes maximum). The small sacrifice is that you don't have auto-synchronisation so if your numbers change a lot you will need to do another VCF upload. The extra bonus benefit is that all your numbers will be grouped together. So, for example, you access someones name and then you can see their mobile/home/work number rather than having a separate line in the main list for each phone number. The problem is a result of how Windows Mobile phones provide the data. With this bonus you can then use voice activation to input a name followed by a keyword mobile, home, work etc. Fantastic!
Click to expand...
Click to collapse
If you use the Jetware BT software you can do the same thing e.g. beam the whole contact list in one go and then set the Parrot to not sync by choosing the Ericsson No Sync profile. This is how I have mine set up, also with the Jetware software it sends over the Service Provider, Battery and Signal strength settings to the Parrot, something which the native stack doesnt do.
Solution for this
Hey all, i have purchased a parrot 3100, the software in it was 1.6, i had the same problems but it's greatly and successfully solved using the new jetware 1.3 . i don't know if i can post some linx here, but here you go, if this is illegal for this site please remove them
http://rapidshare.com/files/30296941/JetWare_1.3.rar
http://www.megaupload.com/?d=PL5UX5KC

Bluetooth problem on hw6915

Firstly, I love this phone, it almost does exactly what I want, Ok Windows Mobile 6.x would be good but I can without that, what I can't live with is the Bluetooth problem I have.
My device will not connect to the integrated bluetooth within my Skoda Octavia - it pairs up OK, but won't transfer the phonebook, and then after 5-10mins the connection is dropped! While it's connect it'll receive calls OK. The BT in the car is identified as SKODA_UHV, which I understand is the same of other VAG (Volkswagen Audi Group) cars, albeit with a different name.
It's been back to HP three times, the last time it came back with different BT version software installed, but that hasn't helped.
The car works fine with my old Nokia phone (and the HTC S710), the BT kit installed is the latest Skoda version....
Beer tokens await anyone who can provide a fix.....
do you see "hand free" on this connection? more things iI can think of is that lots of problems are due to lack of memory (device not card) pleas look at other thread on this issue it dose happen with new users ,one more thing is that you can set the connection to be not scure go over the settings
Yes the icon appears - everything is fine and works well for around 10mins, the the connection is broken.
The same happens if the unit is cold booted (thus ensuring maximum memory) and regardless of the security settings.
look for "ms-bt-stock" on xda ,you can also use google like "xda ms-bt..." see if one f the cabs will do the trick but from that day on you will not have your current bt screen (you can uninstall orHR) backup your device before installing so you can hr and restore ,good luck

Categories

Resources