Greetings,
I'm using a Sony Ericsson HBH-DS970 stereo Bluetooth headset with my TyTN and so far I have only one gripe - when the headset is connected, the ring tone somes through the handset only, not the phone itself, which means that I'll miss any incoming calls if I don't have the earbuds inserted.
Also, the ring tone sometimes does not start until about 20 seconds after the display has started to announce the incoming call.
I tend to have the earbuds hanging from my neck if I'm not listening to music, and the ring tone is not loud enough to be heard that way.
I suspect this may be by design, because it's assumed that a stereo Bluetooth headset is always in/on the ears when connected to the phone, but I want to use the 970 as my only headset even when I'm not about to listen to music.
Is there any way to get a ring tone from both headset and phone?
/POL
?
Anyone figure this one out yet? I have the same problem...
same here, anyone find a solution please post, I think I can change it from the registry I will check it.
Can I ask you folks a question relating to the use of the headset Sony Ericsson HBH-DS970 with the HTC Hermes...do you get all the functionality ie caller ID, the ability to accept and reject the call, compatible with mediaplayer etc.
I have a concern that with the headset not being a HTC product, perhaps some of the Sony functionality may not work with the handset.
Thx
From my experience the ringtones will not come to the speaker if you use the headset as wireless stereo. I only use the headset as handsfree, which makes the ringtones go through the phone.
I used the DS970 for two week with my O2 Trion,feature like Caller Display is No any problem,But when using media player sometime it may out of control, like cann't accept call and control volume or stop.
And the sound quality is acceptable,but it will stop few second after 1 or minutes, I have change the regedit.
May I know is there any way to fix it?
Still no solution?
Anyone come up with a solution to this problem? It really bugs me not to get a ringtone from the unit itself, just thru headset... Works just fine with my old mono handsfree, would be great to have it in the stereo heaseat to...
i have the same problem
hello i have the same problem
the ring sound is only on my headset i have tested with 1.13.097fr and now 1.13.234fr if anybody have the ring on the phone with a headset stereo a2dp cang give us is configuration rom and other soft for the bluetooth.
thank and sorry for my english
juste a little frenchy
There seams as if there's no solution in sight, I got the exact same problem, also with HBH-DS970 and with Jetware Mobile's "Hands-free extension" installed.
I'm still running WM5, anyone who have tried WM6?
/Fluff
Same "design feature" here with my HBH-DS970 and HTC S710 WM6 Smartphone, so it's not ROM, device or OS version specific. I would suggest this is by design.
I'm pretty sure this is by design since thats how it works on my BT8010. Its stereo so it seems to make sense all sounds go through headset although it would be nice if it was an option. The BT8010 has a button on the headset to take it out of music mode so then they will go through the phone but I guess that doesn't help any of you out much.
Another option would be to just uncheck wireless stereo in the pairing and just check it back when you want to do wirelss stereo.
I was wondering if it is possible to get the instructions from tomtom to come through my bt headset instead of my kjams internal speakers, i it is could someone PLEASE point me in the right direction, i have the bt headset paired and working but can not figure this out.
Search for and download BTaudio. That will put all audio through your headset. If you get a call though the ringtone might deafen you.
bittermormon said:
If you get a call though the ringtone might deafen you.
Click to expand...
Click to collapse
I'm not sure if most BT headsets are the same, but mine has a "Ringtone" of its own. Not really a ring tone but it makes noises, if that makes sense.
Anyway, if you have a headset that beeps, farts or makes any other noise, then setting the ringtone to off might be an idea.
To be honest, I have never really sussed the volume controls out on the wizard though, LOL.
The BTaudio app sends all the sounds through the headset. So if your phone rings you hear the phones ringtone rather than the headset ringtone. At least thats how it is on my MDA with a Plantronics 510. Anyway, you could just use somethign like phonealarm and have a seperate profile with a lower ringtone for when you're using tomtom.
hello
when i put my headset the ring is only in the headset it s very bad because i must to have the headset in my ear if i want heard the ring.
i have test with 1.13.097fr and 1.30.234fr on my qtek9000 .
if i put in device bluetooth only free hands its ok if i put stereo to the ring is on the ear .
nobody have this problem with a headset a2dp no ring on the phone only in the ear.
thanks for your reply and sorry for my english
i am a little frenchy
i have news about the bug of the ring in earset
hello
after my problem i see on the forum that they have some many person with the same problem but nobody help us and me to.Then i have make test
and i hope it can know some idea at the developers or other person to resolve this bug:
when the stereo headset is detected there is two profile headset and stereo
if i put the two profile the ring is on the headset if i put only stereo is the same but if i put only headset the ring is good (on the phone).
if a person know how make for the phone desactivate automaticaly the profile stereo when the phonecall come or with a software?
thanks for your reply and sorry for my english
Does anyone know if it is possible to enable ringtones and smstones when I have my headset inserted ?
I mean: You should be able to hear the phone ring or your smstone as there is no headset attached..
The reason is that I use my phone as mp3 player at work. But when I take of the headset, there is no chance of hearing if I get a call or a sms. Plugging and unplugging the headset all the times makes me go insane..
I hope there is a tweak or an option to solve my problem!
TIA
i'd like to have such a tweak too.
ive got a desktop cradle with line out but no speaker connected. the phone thinks a headset is attached...so i cant hear any incoming calls while having the td2 in the cradle.
Hi guys,
I have a question about BT headset.
I have a JABRA BT 8040 connected to my HD2. When my phone is ringing I still hear the same sound in BT headset( like ..turut-turut..) doesn't matter how the phone is ringing/what ringtone I using. I also using this headset with my workphone Nokia 3110c and on that I hear the same tone in BT like its coming from phone speaker.
Any idea where is the problem? Why can't hear the HD ring sound in my BT headset?
I think the sound you hear is the Microsoft Voice Command ring sound. I use the MSVC ALOT so I don't want to turn mine off, but try and turn off yours and see if that changes the ring sound in your earpiece.
starstreak said:
I think the sound you hear is the Microsoft Voice Command ring sound. I use the MSVC ALOT so I don't want to turn mine off, but try and turn off yours and see if that changes the ring sound in your earpiece.
Click to expand...
Click to collapse
How can I switch off the MSVC ??? couldn't find any option for that.
I have a Energy ROM and I just can't see that