Does anyone know where I can buy a cradle for my XDAII that fixes to the dashboard of a car???
I do have the Parrot 3300 handsfree car kit. Bluetooth sync works fine but the order how the contacts are displayed is wrong.
Whatever I do they are displayed first name and than last name but I would like to have it just the opposide.
Is anyone there who could help me????
How to Connect 818pro to activesync via bluetooth .. Tried many time but cannot pair the 818pro with my laptop (with built in BT) ..
Hi,
With my S100, (ROMs 1.12...)the Bluetooth works only if the USB cable is connected and synchronized with computer!!!! If I don't connect it, the bluetooth radio works a few secondes then turn off! (Of course I have tried everything: softreset, hardreset, SHOUTreset...) but the radio bluetooth ever turn off after a few seconds...
And if I use Bluesoleil (+switch bluetooth, see ''stack post''...) it only works when connected with USB cable!!! If not, Bluesoleil doesn't work too!!!
My question is:
IS IT NORMAAAAAAL??? (bluetooth works only with usb cable)
If yes, the bluetooth on a PDA is completely stupid, isn't it??
(IF I WANT A BLUETOOTH PDA, IT'S TO USE IT WITHOUT A CABLE!!)
Please Heeeeeeeeeeeelp!
How old is your device? Have you considered that most probably your battery is already defective?
...
Thanks for your answer!
How old is your device? Have you considered that most probably your battery is already defective?
Click to expand...
Click to collapse
Well, no I bought it in december 2005...
I didn't notice any problem of battery when I use the qtek...
(How could I see if my battery is defective?)
I noticed that sometimes Bluetooth works a few seconds before the GPRS connexion starts... the BT blinks, turns on & off... then stays on... then blinks again... then turns off !
Does the radio bluetooth use the same "channel" as the GPRS to work???
Thus, I have the impression that I must choose between telephoning and using the bluetooth… and moreover that the qtek must be connected with an usb cable to work! This is exasperating! :-(
Bluetooth need usb
PS : If I connect and synchronize my s100 with the usb cable, bluetooth (and bluesoleil too) works. A soon as I disconnect the cable, I loss the bluetooth radio after a few seconds... And the S100 (when I use Bluesoleil) say to me:
"Your Bluetooth device initialization fails! Do you want to configure it manually?"
Click to expand...
Click to collapse
So, it means that bluetooth need usb cable ant that is foolish!
I have BT on all the time and have no problems using TT and phoning at the same time. BT consumes a lot of power thus to check if the battery is the problem, fully charge your battery then start using BT. When the problem occurs check for the battery status.
ok
Ok, thank you for this information (GPRS + BT together).
Regarding the battery, I have bought a new one on the web, I'm waiting for it...
...
Hi,
my Qtek S100 has always a problem: the bluetooth radio works fine when the S100 is connected with Usb Cable. But as soon as I disconnect the usb cable, the bluetooth icon blinks then become deactivated.
What could be the problem?
Thanks.
If bt is on, the bt light blinks wether the device is connected (via usb or power charger) or not connected.
no
It's not the light but the icon
I have similar problem with my T-Mobile MDA Compact!
1. I switch on Bluetooth. The blue light is blinking and bluetooth icon is blue.
I wait few seconds and click on the bluetooth icon.
But T-Mobile MDA Compact is freeze. I can't operate with device anymore.
(I can't press hard buttons, i can't use stylus, i don't have connection
to my bluetooth handsfree Motorola H3).
2. I connect my MDA Compact to PC with USB cable. I switch on Bluetooth.
Everithing is OK! I have bluetooth connection to my PC, to my Motorola H3!
P.S.
Bluetooth handsfree Motorola H3 is ok. I have tested it with other mobile phones and PC.
I own a JasJam I-mate and have a consistent problem with the Bluetooth communication with my car speaker Parrot ck3300 and parrot 3400 ls-gps and my Bluetooth Motorola earphone hs820 .The problem is that when I switch the car on the Bluetooth communication is working OK the first time. Once the car switch it off and start again the I-mate is not being paired although it show that the Bluetooth is activated ( flashing purple light) but no pairing occurs. When I check the I-mate in the Bluetooth definitions the checkbox for pairing is disabled. The only way to connect again is to reset the I-mate.
Please help me.
Thank you