Hi Folks,
I am having trouble trying to access any SMB shares when connected through 3G(or 2G) to my VPN. The VPN connects, and using VXUtils I can see that Host names resolve correctly to IP for my network, I can ping by host name and IP to my devices and I can do an ip range scan and it finds all the hosts connected to my home network. I can use RDP to connect to my XP machine through host name (With or without using pocket hosts) and I can view the setting html pages of my router through internal ip's but I cannot access any shares! Just to make matters a little more complex, if I connect through a wireless network (using the VPN) everything works fine (assuming it is allowing pptp passthrough)!!!
Oh yes, and the VPN itself and forwarding on the router etc is all fine as laptops and desktops can connect remotely (and of course so can I).
It is a Vario 3 on T-mobile.
Any ideas anyone? All I want to do is be able to access my SMB file shares (on a mybook world edition) whilst out on the move.
Thanks.
Related
i got usb wlan adapter. it's ip is 192.168.1.130.
the lan adapter in my pc has 192.168.1.84 ip.
all computers on my local wired network has 192.168.1.* addresses and 255.255.255.0 subnet.
i fixed the IP of SD sandisk wifi adapter on my mda compact to 192.168.1.131.
Usb adapter is in peer-to-peer (ad-hoc) mode and i normaly connect with ppc to it. i got 80-100% signal all the time.
the problem/question #1: why i cant ping from ppc to PC ? firewall turned off.
#2 - if i could ping it, would i be able to ping all the other ip's on my wired network?
#3 - if i could be able to ping all of those computers, how should i set-up a workgroup on ppc and be able to map network drives through wlan link?
#4 - if i would be able to map the drive over wifi link, would i be able to add mine 20.000 mp3s to the pocketmusic's playlist and play them wirelessly?
thanks in advance!
And when i ping from PPC - i see on pc that "received" packets are raising -
ie. now it shows 12 packets received, when i run ping on ppc to pc, the
number increases to 16 (4 pings!) but all are time-outed....
And if the IP on both sides are set to "automaticly", they got assigned
169.254.*.* IP's. Then the ping goes through correctly but i can't still
access the network. The network bridge between LAN and WLAN connection only
made things worser, making my internet connection unusuable (DSL through the
same LAN connection) so i deleted the bridge. Now - ping is going but i
still cant map my pc's drive.... what could be the problem...
Same problem
Dakky,
I have the exact same problem. I bought a Netgear WG111 Wireless USB dongle. I created an ad-hoc network, connected to it but can't connect to the internet or browse my shared. On my desktop the sent packet go up but not the recieved.
Are we both being stupid, can't you connect your PPC to your PC using an ad-hoc network? I have now tried to connect with two different desktops to my XDA and a friends XDA IIs running WM5 to my desktop but had no success. I can connect to an access point and browse file/internet no problem.
I have an XDA EXEC and run XP Pro on desktop.
I've got similar problem. I have Linksys Wireless-G usb network adapter, i assign same class IP adresses (192.168.2.1, 192.168.2.2, mask 255.255.255.0) the wifi connects in ad-hoc modebut how can sync over wifi ?, if I am able to sync over wify i will be able to use my pc's internet connection wich is a lot faster than any gprs/edge
I don't think you can network in this way - basically you have a bunch of clients but no 'server' I think you need a wireless hub (with Internet connection in there somewhere) in there somewhere.
If you do a search on microsoft web site ther is some info about using a PC as an internet share for other PCs but you have to use a very specific IP address rnge for this and set the share PC up in a certain way
Anyone get these two to play nice together?
Details:
Cisco PIX 501e at the office
WM6 3g phone (HTC TyTn II)
vista/xp laptop (working properly on either would be great right now )
VPN setup on the pix is, i believe, fine. I could be wrong tho, i set it up by trial and error + reading the manual having never even touched a cisco device before
It works tho and has worked flawlessly for months now with Cisco VPN Client on XP or Vista machines.
Old phone was WM5 and used the clunky and annoying modem emulator to enable a laptop to use it to connect to intarwebs in the middle of nowhere, this was great and after faffing about getting it setup worked fine (required you to be logged in as administrator on vista tho :\ and not just a user account with admin privileges, actually administrator. Annoying.)
New phone is WM6 and uses internet sharing to connect with a laptop, this is a much better solution with no faffing about in vista and XP
Problem: Cisco VPN client connects to the pix through Internet Sharing on the phone just fine, however no traffic gets through.
Cannot ping, web browse, dns, rdc or anything to the network at work. Tried with Cisco VPN client v4.6.00.0049 and v5.0.01.0600 on XP and v5.0.00.0340 on Vista, none work.
This sucks
Now, i know its not a problem with the laptop or the vpn software on the laptop as these work fine when connected over ethernet or wifi.
Its not a problem with the phone's 3g connection, i installed a trial of bluefire vpn client onto it and that connects to the vpn and works just fine when the phone is in standalone mode.
However for the life of me i cannot get the two bloody things to work together.
Plz halp
Hi,
Often times, the inability to ping a local host (computers or other connected devices e.g router, hardware firewall, printer, PPC, etc) or hosts, is due to the firewall not allowing traffic through the router. It can also be that the hosts are incorrectly configured to be on different subnets, even though they are local, as in your own case.
Proceed as follows to troubleshoot:
a). Ping the router
Note that the idea is to see if we can establish communication with the router or hardware firewall such as the Pix.
At command prompt (c:\>) type:
ping 192.168.0.1
(each router manufacturer uses a different default internal IP address for its router) - the one above is for a Netgear or D-Link router - for a Cisco router, you would need to know the Cisco IOS command - see your router manual for this.
b). ipconfig /all
Note: there is a space before the forwardslash.
When it returns the parameters, check to see that the IP addresses are all on the same subnet.
This is crucially important for you to take good note. If you are not able to ping a local host or gateway, it's most likely due to this.
c). Ping the Pix Firewall (using its IP address)
d). Ping a remote IP address, e.g. your ISP's gateway or DNS server
e). Is there traffic? If it returns successfully, then ping the other hosts, including the VPN client.
Pix Firewall
Check to see that the Access Control List is configured correctly by ensuring that the IP addresses of the connected hosts have been entered, with the relevant access rights.
Router
Log on to the router. Whilst there:
Ensure that the hosts (computers, etc) are all on the SAME subnet. If they are on different subnets, you must correct the IP addresses to reflect that they are on the same subnet.
Note: If you do really want them to be on different subnets, then you need to use a default gateway.
Hope this helps.
kiwi992.
Hi All,
I have a tough one to solve for a colleague..
He is wanting to use his HTC Snap (WM6.1) Data connection to allow his laptop to connect to office VPN(VPN client is on laptop).
ICS works great via USB for internet access only. The VPN subnet is the same 192.168.0.x subnet as the default IP assigned via ICS.
I changed the ICS DHCP assigned IP range to 192.168.10.x (via reg hacks) and internet works ok from Laptop still.
VPN connects successfully from laptop (Netgear Prosafe VPN client) and stays connected only I cannot access, ping or anything on the 192.168.0.x subnet through the VPN..
Internet continues to be accessible from laptop whilst VPN is 'connected'.
Any ideas anyone?
Thanks in advance.
Hi all,
Has anyone succeded to browse a network share once connected by VPN to internal network over a data connection (not wifi, only 3G, gprs, cellular carried)? Over wifi it's possible using TC or even IE browser method.
It's strange that if i use vxutils or pocketlan i can ping the pc where that share is located, either by IP or NetBios name. I can even SSH over putty, or RDP using IP, not NetBios. All this is done when connect to VPN over cellular.
So my question is why doesn't that share appears, giving an error that the network path wasn't found?
It's obvious not because TC, since it works over wifi, and ping with vxutils or pocketlan recognizes netbios name. Why do these tools can use netbios and file browsers can't?
Can it be because it's using cellular line? Does anyone have any ideia why?
I have a simple home net using mostly windows vista and 7 computers, some printers, external hd servers for backup storage and cameras in a workgroup static ip setup behind an off the shelf router. i set one of the computers as the vpn server since i dont want to buy a dedicated hardware vpn in a vista ultimate machine thats on 24/7 anyway with an incomming server... with the correct ports forwarded from the router to the vpn host.
my remote vpn laptop connects to the vpn fine and can see the network resources, however, has no internet connection once the vpn is connected. do i have to set the host vpn computer to do some sort of its own dns assignments to the incomming connection? its set for dhcp so i dont know why it would assign a valid IP to an incomming but not any other info.
in other words, on my remote laptop, i can connect to a random wireless internet hotspot and have full internet access. I can then enable vpn and log in to my home network and see all the network resources, however if i try to use an internet browser, there appears to be no internet. if i disconnect the vpn, the internet resumes to work fine and obviously the vpn resources are no longer accessable.
what am i missing? under incomming connection properties general tab, "allow others to make private..." is checked, under users the correct user is selected along with "require all users to secure...", and under networking ipv4 "allow callers to access..." is checked, and assign ip auto using dhcp is checked so I would think it should be working fine at this point, however it doesn list anywhere a gateway or dns to assine to incomming connections, only ip's.
host vpn computer is vista ultimate with static ip behind a retail router also assigned a static ip via my home isp.
the remote laptop is running ubuntu 12. just for kicks and to rule out ubuntu causing some problem, i set my android phone up for vpn use via 4g network, and the same thing happens. connects vpn fine, has local resources, but loses internet.
i also was curious as to having a vpn log in for the existing user account on the vpn host machine... in other words, should i just add the username on the host computer as a vpn client, and log in vpn using those credentials? and will that even work if that account is logged in, or will i have to remember to log out when im on the road to use the vpn connection.
thanks all!