Hi all,
I'm looking for the mainboard of the hw6915 because I broke it with a screwdriver during SIM remove. The SIM blocked in the plastics and I forced the remove with a screwdriver!
Have you one?
Is there anyone with a broken hw6915?
Thank you!
you need a mainboard or housing ? (i could not figure how to break mainboard while taking out the sim )
maybe you can try below if it is housing problem-hope that it helps
http://www.repairhppda.com/product_...d=193&osCsid=02fea4858d3b790d96a6cb47176129d3
Related
I have a wizard with a burned mainboard due to a faulty charger-cradle (be carefull with those)
I need to find someone with a faulty wizard that wants to sell it as parts.
The only thing that I need is the mainboard so if someone has a wizard with a cracked screen or with a faulty keyboard or any other problem except mainboard please email me.
[email protected]
I really need everyone's help. I had to do some repairs on my TyTN II and some of my screws got stripped and lost. Now my phone is sitting in pieces because I am missing screws. I have called HTC and they do not sell screws. I have also looked online and I still no luck.
Please HELP!!! I really want to use my phone again.
http://cgi.ebay.com/9X-SCREW-SCREWS...10364QQcmdZViewItemQQ_trksidZp1713.m153.l1262
Perfect!! Thank you, I ordered 2 sets.
hi, rad1224 you receive the screws set? contains only 9 screws T6? I would need 10 screws T5 for the display back cover.
Thanks prema! i finally found a chassis for my kaiser! i don't need the full housing anymore!
thanks!!!
Hello everyone.. I just got my Htc touch (Elf) Digitizer from Dealextreme. Anyone know if I need to put some kind of tape at the back of the digitizer or infront of the housing before I put the Digitizer? Because in the pdf file that i downloaded there is no instruction on how to assemble and disassemble the digitizer. Thanks for those who will reply.
http://forum.xda-developers.com/showthread.php?t=407323
Please google search in future.
Hi friend, I need an help!
I would replace my HD Digitizer because it doesnt work....but I have a question me first do damage.
how is connect the digitizer's flat cable to the LCD?
From the photos I attach I can see a little connector , but I understand how I can detach the old flat cable and how i can insert the new..i must use a welder?
I hope someone can help me
Thanks
Hi,
I've replaced the buttonbar of the HD2, however during assembly the mainboard connector was damaged and can't be closed anymore.
See the picture for the connector (next to the mylar). Can someone replace this connector or repair and assembly it again? Offcourse I will pay for the repair and postage!
http://db.tt/s1eOo86r Photo here...
Thanks!
That is not repairable you will need a new board or you can try to apply adhesive tape to it