X7501 and Unlocker Success Track - Advantage X7500, MDA Ameo General

Hi guys. I have a x7501 and I tried the unlocker and now my device is dead.
I sent the device to HTC and the replaced the motherboard and sent it back. now I dont know what to do. i have a x7500 that I unlocked via unlocker and it was fine but it didnt work with x7501.
I wanna know the success rate for x7501.
So if you have a x7501 and used unlocker could you post you success rate also the process and setup u had. ( xp or vista). I have read that there are lots of people with dead athena's so This would help Members Alot ( atleast newbies )
Thank you ...

i bought my htc x7501 a few days ago and unclocked and flashed black touch PK3.0 on the first day and never looked back.i ran the unlocker on windows xp and only ran step 1.

I 2 (two) times totally, unrecoverable brick my athena with Olipro unlocker (after step 1). Two times SERVICE back my device to life. Never more AthenaUnlocker. I'm unlock device with imei-check guys.

i just got mine back from htc and i really need it unlocked for tomtom from my x7500. has anyone used imei-check or no.
i want to used oli's unlocker but i don't wanted to be a brick again

ok I got mine unlocked with imei-check and i dont think it works...
I can use any htc rom but no cooked ones
has anyone had this problem

*ahem*
STOP USING THE OLD ****ING UNLOCKER AND DOWNLOAD VERSION 2 YOU TWERPS
also, to verify you were using version 2; the debug output when you start it up should read "Version 2.0"
and Vista may or may not be a problem... but do check you're running V2.0 for gods sake, and if you are, we have a problem.

Olipro said:
*ahem*
STOP USING THE OLD ****ING UNLOCKER AND DOWNLOAD VERSION 2 YOU TWERPS
also, to verify you were using version 2; the debug output when you start it up should read "Version 2.0"
and Vista may or may not be a problem... but do check you're running V2.0 for gods sake, and if you are, we have a problem.
Click to expand...
Click to collapse
i am an in teh buttom is says version 2.0 and when i do step one it send the enablerapi to my device and then after installing it it goes to backup the spl and it does but then it gives me an error and is askes me to continue or hit quit to exit.
and it did the same last time. has anyone had this error.

OK, click details and paste the first 6-7 lines
by the way, when programs throw exceptions, that's generally a clue that you probably shouldn't carry on and try to flash a sensitive part of your device with it

i tried in 3 different pc's and finally worked.
i posted the screen shot for the error that i was getting.
check it out if you need to but it is alset..
thank you and i will pm midget to see where he wants me to send the 7500

No Issue's
New HTC Advantage (i.e. 7501) ran the unlocker step 1, flashed PK 3.0. No issues so far, everything works acceptably well.

Successful x7501 Unlock on Vista
Hey I just wanted to add I successfully unlocked my x7501 the day after I got it, using olipro's unlocker on vista ultimate. I had no problems performing steps 1-3 fully, it was a bit of a pain having to flash the rom like 4 times but now im unlocked for good and future rom updates will be easy.
Loving the AP Touch 3.0! My sincere thanks to all who have contributed to the Athena Project.

Related

Please help upgrade Prophet/ overcome CID (VendorID) error

First of all THANK YOU all of the Great Minds of XDA Developers for all the support and great work you do for us!
a lot of your work, support and software and advice has been priceless help!
Any way no ass kissing here, just wanted to say thank you. ...and ask for help. As you probably know, there has been a lot of problems and issues with Prophet. (and very little or NO support and from manufacture and from providers. and there is not much available from xda developers forum users on this device. Though there has been great amount of support on any other devices. which has made me a happy user of Magician. But to cut it short, PLEASE HELPPPPPPP with Prophet!!! I can't reflash my XDA Neo with new WWE rom due to CID (vendor ID) error! It comes with german rom and I don't read german but love the phone! (and stuck with 2 year contract!) I tried aWisard utility numerus times in hopes that it would work despite the design for different device. I tried all kinds of roms available out there with no luck. and ofcourse HTC or O2 wouldn't help in any way! (different O2 support
techs said to me that I couldn't flash my Magician with WWE rom becouse it would kill the device! And I had it flashed in all the possible languages!) Any way, my magician is now a history (sold) and my new prophet is great pain in a ass!
Do you guys think you could help all of the xda community (and unlucky suckers) out here and help us overcome CID error so we can update/change our roms? (and screw the HTC, Qtek, Imate and O2 for such a poor support!)
I would greatly appreciate it! and it goes from all of us!
hi aleksandr
Just go the link below and follow the instruction to unlock the CID.
I just upgraded my 818 Pro to JAMin ROM, run very smoothly.
http://forum.xda-developers.com/viewtopic.php?t=37386
Hi, thank you very much for the reply! I did try this option but I have a little problem with Wisard program. I ran all the commands, enabled rapi,backed up my rom, ran unlock CID command, it returned "success" line, but when I try option -w- to write new rom into my prophet and get to "select OS rom file" where it saids to enter numbers only I don't know what to enter in the command line since the program doesn't have any roms listed in the command line screen. I've tried entering the rom release number, I even tried renaming rom to a number and I have placed the rom nk.nbf file in all the possible folders including "rom" in the program directory. but stil, once I hit enter, the command line window shuts down. could you advise?
and I did put the aWizard folder and rom file in the root directory on c:... tried d: too... stil, no result
Hi Alek,
Try this....
You now have a device that is CID unlocked, exit aWizard and locate the downloaded RUU update you now wish to load to your device. You should not need to use aWizard to do the flashing, just use the aWizard program to unlock the CID from the device.
I too have a Dopod 818Pro and I successfully flashed it to the new I-Mate JAMin ROM. All I used aWizard for was to unlock the CID on the Dopod 818Pro then exited aWizard and just used the downloaded RUU update.
Regards,
voyager
Thanks voyager, I guess you're very fast typist :lol:
Hi aleksandr,
Did you did an ActiveSync with your Prophet first then run the aWizard? For me I just run aWizard to enable RAPI and unlock the CID on my 818 Pro. Then I just double click on the latest JAMin ROM exe file, it detect my 818 Pro without any problem.
ualvoyager said:
Hi Alek,
Try this....
You now have a device that is CID unlocked, exit aWizard and locate the downloaded RUU update you now wish to load to your device. You should not need to use aWizard to do the flashing, just use the aWizard program to unlock the CID from the device.
I too have a Dopod 818Pro and I successfully flashed it to the new I-Mate JAMin ROM. All I used aWizard for was to unlock the CID on the Dopod 818Pro then exited aWizard and just used the downloaded RUU update.
Regards,
voyager
Click to expand...
Click to collapse
First of all thank you guys for getting involved and helping! I really appreciate it!
well, I tried just to CID unlock it with aWisard, got "successful" message and then I ran about 10 different upgrades from different providers, qtek, Imate, etc, and still got the wrong vender message!
hey mamakap,
you're right on the fast typing, my fingers are still burning...hee hee
voyager
mamakap said:
Thanks voyager, I guess you're very fast typist :lol:
Hi aleksandr,
Did you did an ActiveSync with your Prophet first then run the aWizard? For me I just run aWizard to enable RAPI and unlock the CID on my 818 Pro. Then I just double click on the latest JAMin ROM exe file, it detect my 818 Pro without any problem.
Click to expand...
Click to collapse
I usualy ran after sync, since the aWisard said it has to be fully ran. I will try it now!
Thank you! hopefully with all of your support I'll get the nedded results! Thanx!!
ok, just tried enable rapi with active sync off, the aWisard reopened and reastablished connection, but it still not finding the rom file.
wait a minute, does the rom file has to be in .nbf format or .nba?!
I'm looking right now for Extend Tool (64HTC Extended ROM Tool) and will convert the rom rom to nba file and see what happends.
man, I wonder how it worked for you just running unlock CID command and upgrading with the upgrade file!
Alek,
You already unlocked the CID from your device did you not? Your first post said you got a success message.
Put your device on the cradle or plug in the usb cable. Let ActiveSync do its thing then after the sync just double click on the RUU update you want to install. Follow the install wizard (NOT aWIZARD) of the RUU update. You do not need aWizard any longer to update the ROM, just use the RUU update you downloaded.
post if you need further help.
voyager
ualvoyager said:
Alek,
You already unlocked the CID from your device did you not? Your first post said you got a success message.
Put your device on the cradle or plug in the usb cable. Let ActiveSync do its thing then after the sync just double click on the RUU update you want to install. Follow the install wizard (NOT aWIZARD) of the RUU update. You do not need aWizard any longer to update the ROM, just use the RUU update you downloaded.
post if you need further help.
voyager
Click to expand...
Click to collapse
I've tried that several times and its still returnes the error!
Alek, one more thing ... you do realize that by doing this, you will wipe your device clean (hard reset) and you will need to load everything from scratch. If you use a back up program like Sprite or SPB backup YOU CAN NOT USE THAT BACKUP once you do this!!! You will be loading everything from scratch.
Just letting you know!!
voyager
OK Alek,
Tell me EVERYTHING you have done up to this point. I need to know what device you have, what ROM is currently on it and what ROM you want to flash with. Give me 5-10mins and I'll check back....lets try to get this resolved for you tonight.
voyager
yep! I do know this.. thank you though! I had an experience with Magician on that but I guess it's not much help with prophet though!
I haven't installed anything on this device yet.. just played with ExtRom, unlocked it and deleted O2 staff out of it just to see if I can do it But I do want to get the right OS in here first and then I'll worry about the rest of programs..
you guys wouldn't happen to have Extend Tool (64HTC Extended ROM Tool)would you? I'm visiting my family and I'm on my brothers PC dont have all my staff with me,and can't seem to find it on the XDA FTP
:?: What 64HTC Extended ROM tool are you referring to? If you're on your brothers computer do you have an ActiveSync connection to YOUR device? If so, is all synced up with your Outlook profile etc...?
First I need to know which Prophet you have (Dopod 818Pro, I-Mate JAMin or Q-Tek S200).
First let me say this, if you have a Q-Tek S200, I don't think you are going to be able to upgrade the ROM. I have seen several threads here that indicate that somehow Q-Tek S200 is permanently locked and that the aWizard program will NOT work on it no matter what, (or at least until some geneius here figures it out
Please let me know
voyager
ualvoyager said:
OK Alek,
Tell me EVERYTHING you have done up to this point. I need to know what device you have, what ROM is currently on it and what ROM you want to flash with. Give me 5-10mins and I'll check back....lets try to get this resolved for you tonight.
voyager
Click to expand...
Click to collapse
Hey, thank you so much! I really appreciate it!
ok, I have XDA Neo, German Version
rom 2.9.4.30 GER
rom date 2.14.06
protocol 413.1.03
ExtRom 2.9.4.120
First I have unlocked ExtRom with Wizards Utility
Then I tried to reflash the device to WWE rom with different upgrade utilities from different venders, tried Qtek s200,it didn't work, reterned wrong Vender ID error, then Imate- same result, then Dopod, using diferent RUU wizards, including Wizard Rom Upgrade Utility NoID.
still, no luck..
then I tried aWizard,
first I ran Rapi enable
second I made a back up of my own rom,
then Unlock CID,
then tried writing rom using aWisard, didnt work, aWizard doesn't finds any roms(and the program and rom are in the root directory of c
then tried just unlocking the CID and use Upgrade Wizards again, still, no luck!
tried praying, that didn't help either!
thinking about beer now! But I don't think that would help either
I did sync with PC and outlook.. activeSync4.1
I even tried flashing it with Danish rom, that I couldn't install it either..(I've read on XDA that flashing danish rom first than and only than I could try it to put WWE in to it. well, that didn't work either)
I tried running all possible rom upgrades that are available, and always got wrong vender id error.
even after aWizard reported that my rom was unlocked!
so I have no Idea what else I can try!
may be getting drunk and "sync it in the toilet"!
If we get this to work, you owe me a beer!!! OK, here's what I need you to do...
1) I tried researching this board for any signs of the O2 Neo being permanently locked like the Q-Tek S200, could find NOT anything. (edited, could NOT find anything)
2) Do you have a copy of the I-Mate JAMin RUU update on your brothers computer? If so great, if not, go get it. Try the latest one that came out yesterday.
3) Once you have this I-Mate JAMin ROM (save it to the Desktop for easy finding later) let me know.
4) Also, make sure you have ActiveSync 4.1 and it is set up and you have synced at least once with it. It doesn;t matter at this point what PIM info is on it since its going buh bye ina while, I just need it synced with a REAL partnership, not Guest.
Let me know when you have all these things done...
voyager
you've got the deal on bear! all you can drink! I'll bring you the german staff on my next visit to states!
any way, got it all! Imate jamin rom and sync has been done!
OK,
1) do a soft reset on the device. Once the device is fully up again, plug the usb cable in and let ActiveSync do its thing.
2) Open aWizard. Run the Rapi deal again. After that run the unlock CID.
3) If you get a success message after the unlock CID, CLOSE aWizard.
DO NOT UNPLUG THE NEO FROM THE USB!!! Let me know when this is done.
I found your 64HTC Tool:
http://buzzdev.net/component/option,com_remository/Itemid,100/func,fileinfo/id,196/

Did i brick my Tmobile MDA? HEEELLLLPPP

Hey guys i tried flashing my rom using the Shelltool. I loaded the two cabs on the device and put it back to Tmobile 2.26. While i was in the shelltool it told me to do a hard reset and i think the phone was frozen (it didnt go to the normal colorful screen like usual) so i took the battery out of the back and powered it on. I left the software running like it said but it just froze up.
Now my MDA wont move past the Tmobile screen. I REALLY need a hand with this because this phone keeps my life in line! I dont even think ill be able to get up tomorrow because all my alarms go off my phone
Let me know if theres anything i can do otherwise im looking at a Motorola A1200 :-(
kind regards,
Eddy
Hi there,
Not familiar with Shelltool. I do most of my flashing using ActiveSync. Have you tried forcing the phone into Bootloader Mode (hold the Camera button while turning it on). Worth a shot.
If t-mobile was the original ROM on the phone, then just flash it again using the exe (or RUU if you extracted the files from the exe) instead of using shelltool and see if that brings it back to life.
well its stuck on the tmobile splash and shows no actual connection to the machine would it still work?
If you can get into bootloader mode then you should be fine. Just put your device into bootloader and flash wizard love rom or the rom that your device came shipped with.
Good Luck
looks like its working guys but its most likely still going to look and be WM5. Im still willing to try and get WM6 on it tho. I have the roms but its just not working any ideas?
Well, if you're flashing the t-mobile ROM right now then it is going to be WM5. Since you now know what to do if the ROM your loading doesn't stick, try flashing the ROM you were trying to flash again. By the way, what was your IPL and SPL before you flashed it the first time where it didn't work? If it was less than 2.xx then that was your problem most likely. If you're now updating to the latest t-mobile ROM the way I told you to (using the exe or RUU) then your IPL and SPL now should work fine with WM6.
Well I just finished upgrading my MDA to WM6. Here's what I did. First off I
fould out that you need the phone CID Unlocked for it to accept the WM6
ROM. Follow the instructions on this thread by Dr. Puttingham.
http://forum.xda-developers.com/showthread.php?t=285435
This should get your MDA ready provided it is a G3 (thread will tell you how
to tell the difference.) Then follow the directions on mfrazzz's thread:
http://forum.xda-developers.com/showthread.php?t=324632
I had problems with my MMS after the update but after re-installing the WM6
ROM and installing the CAB files by Lurch anf FZZF I got that problem
squared away. Believe me when I say I know what you are going thru. I
was fiddling around with this for about a week. Luckily I am on vacation and
I had plenty of time to read and decipher alot of the info I found. Good luck
and remember to READ, READ, READ. BTW, props to all that contributed to
these fine tutorials and for this awesome ROM. I have it running on my MDA
for three days now and am very happy with it. I am also using the 3.08
IPL/SPL which seems to give me better reception, which my wife seems to
appreciates

Is my second hand Orbit CID Unlocked

How can I tell if my UK O2 Orbit is CID unlocked? I bought it 2nd hand and told it was sim free does this mean it is already CID unlocked? All I know for sure is it works with an orange and virgin sim aswell as O2!
I ran the Artemis_USPL prog which gave me a white screen then disconnected me from A,Sync I had to remove the battery and replace to get my phone back so couldnt run through the rom-burning process that followed.
I am hoping to replace my exsisting O2 rom with the Touch 3.01 full but the last thing i want is to end up with a brick, any advice appreciated
No need for CID unlock
Hi coolin,
there is no need to CID-unlock.
Just follow the whole USPL-procedure. The white screen
on your Artemis and the disconnection of activesync
is normal during this procedure.
Every time you want to test a ROM: perform the USPL-procedure.
Regards,
mytrinity
Sorry for sounding such a noob but I went ahead and tried to burn the touch 3.01 and after 3% it cam back and said the image file is corrupt! it rebooted my PDA but thankfully all is fine could this be a one off shall i try again?
UK orbit and Windows Vista Ultimate PC
thanks in advance
Ofcourse you should try again, don't give up so soon.
But everything you do with your device is at your own risk.
I'm using Windows XP and never had any problems with flashing. For Windows Vista there is sometimes an extra exe-file included in the ROM-packages to write the ROM. I'm not sure about the USPL-procedure.
Have a read thru thread http://forum.xda-developers.com/showthread.php?t=311403 to see if it is wise to use Vista for the USPL-procedure.
OMG DUDE and Holy Sh~T you rock!!! its sorted and its like having a whole new Artemis on steroids thanks a lot for your help its mucho appreciated.
tbh I did noob a little I wasnt letting the 1st procedure enough time and although I did it with XP im sure all would have been ok with Vista.
cheers again a very happy me

Newbie To Mda

I just got a TMobile MDA, and am brand new to this. I tried upgrading thru TMo site, but couldn't get Windows Mobile 6.0. Still have ROM 2.26.10.2; Radio 02.25.11; ExtROM 2.26.10.105. Anyway, I tried SNN Ver 2.o off of this site and it wouldn't upgrade. Any help from anyone before I start looking through site. Just looking for direction and a helping hand before I fry my MDA. Thanks to one and all. Looking forward to making great use of the site.!!!
Look here first
http://forum.xda-developers.com/showthread.php?t=298613
You will need to make sure that your phone is unlocked before you can proceed with any upgrades to wm6
Check out the Wizard Wiki also - lots of great info
Remember - you are on your own, you are responsible for any issues with your phone. But, if you read the sticky posts here, and on the wm6 wizard board - the directions, while extremely detailed - are right on.
Read, understand, and when you are ready to proceed - do not skip a step, and if the directions tell you to flash something, or upgrade something twice - it is for a reason - do it twice.
Good luck
mucho thanks
Much appreciated. Don't know if phone is unlocked, but like you said ... will read everything twice. Thanks alot. One more thing ... can you guide me to info on how to find out if fone unlocked ... or how to do so. Once again, thanks. Looking forward to using the info.
Loudaman said:
Much appreciated. Don't know if phone is unlocked, but like you said ... will read everything twice. Thanks alot. One more thing ... can you guide me to info on how to find out if fone unlocked ... or how to do so. Once again, thanks. Looking forward to using the info.
Click to expand...
Click to collapse
Download WST tool and run the 'CID Action' button,it'll verify the CID lock/unlock status of the phone.
Cheers!
where do i find the wst tool and how do i put it on the phone.
wat is the wst tool and how do u put it on the phoine
abidin786 said:
where do i find the wst tool and how do i put it on the phone.
Click to expand...
Click to collapse
You can find the tool here
http://forum.xda-developers.com/showthread.php?t=329170
You install it on your pc - and it will read and diagnose your phone through the usb connection.
Read through the attached post - lots of info, download the file - and good luck
actually i bought the phone from ebay and it didn't come with sync cable its 8125 from at&t is there another way to unlock it somehow maybe. Please help me
You can't upgrade without the usb cord and a computer (you can, but it is far more difficult.
First you need the USB cord
Then You need "Wizard Service tool" Type that in to the search engine on this forum.
Then read the stickies (the ones at the top of every forum) related to the wizard
hint: Faria; Dr. Puttingham.
Then search wor the "Wizard service manual" which will explain how your the wizard works and has IMPORTANT information for you in case you screw up and have to put your Wizard into bootloader mode manualy. You can still recover even if it looks really bad.
Then you need the lockwiz tool that works. I'm not sure that the wizard serice tool will unlock the phone, I did it the hard way before discovering it.
Then you need a version of WM5 that has a hacked IPL and SPL 1.5.xxx (you willl find that in the upgrading and modifying thread on the wizard forum
Once you downgrade; you can use the WST(maybe) or Lockwiz (most likely) to unlock your device (you may have to run it twice or more if you are not paying enough attention)
After the phone is unlocked you should upgrade back to the 2.26 version (Tmobile rom)
Then you should know how to flash roms by then.
Getting the thing unlocked is the difficult part. The cooks make flashing easy. You will probably not be able to yse your device for about a day while you make sure that you follow all the steps making sure that you get it right.
also read all of the directions well. I know it is a lot of information and can be hard to swallow. idoubt that you will "Brick" your wizard. It might seem that way at times; especialy while you are flashing the rom as it take a long pause sometimes right in the middle of it and it's scarry. You should be able to recover just fine. (I have a TMo MDA and it was built far better than I think HTC intended to build it)
Lastly. Take the plunge when you are confident that you have all of the tools, Information, and contingency plans (such as the 2.26 version of tmobile rom)
Word of advice while you are looking for an upgrade: All ROMs have "issues" so if you read all of the posts on a rom that looks good to you, you will see that a lot of people are complaining, asking for improvements and so on. This is what you should use to chose what you want to put into your phone. If you start a thread "which is the best Rom? expecting that the information will come to you; you won't get far. I know that my "join date" says one thing, but I have been looking at this forum since august off and on to see if I should even make an attempt or open my mouth before I figured out how things work here. Heard a preecher say once "God helps those who help them selves" and while I'm not partcularly religious, I have to agree with that kind of policy.
good luck, and don't panic if something unexpected happens; in about a half hour you will figure out how to fix it... unless you panic and loose your head.
Some dude was threatening to "throw (his) phone into a wall." That's not very productive.
To unlock through lokiwiz02b tool,it must have direct physical connection between phone and pc via Activesync. Although,its possible to Activesync with BT(BlueTooth),but not sure if unlocking is possible,according to my understanding,it shud be possible,as all the data can be transfered and all the info can be exchanged via BT,there shudn't be a problem,but as I have never tried it myself,I can't be sure,its certainly not possible to flash a Rom with BT.Rom is flashed in Bootloaders mode only,and in bootloaders,Bt doesn't work,so flashing of rom is only possible via usb cable connectivity.
Cheers!
Everyone keeps saying "the USB cord" when the actuality is, "A(ny)" USB cord will suffice. Any USB to 5-Pin (Mini B) is fine. You should be able to score one from a local electronics source for less than $10 US. Considering their value to you (being able to use ActiveSync, being able to flash the phone), I'd say it is a sound investment in your future fun with the phone.
Here's a (linked) example:

Help! my dopod is fUBAR

Hi all,
I'm a newbie here so sorry of this type of problem has previously been solved in a later thread. If so I couldnt find it.
Several months ago I returned from China to Germany with my Dopod C858 with stock windows in English, I found a link on how to upgrade the PDA to a cooked rom ( I cant quite remember which one but I worked fine and looked quite smart compared to the standard windows layout) nedless to say several days later I was not quick enough with the charger and let it run flat. After charging nothing worked anymore!! I can get boot loader (ISPL 1.09.0001 SPL 1.09.0001) and thats it. I have tried every possible way appart from gold card to reinstall a rom but always have either error 240,264,300 take your pick its different every time. I am running vista 32 (Prophet tools vista driver ). Please help with some suggestions or guidance how I can restore it..
Ps Active sync or even widows mobile device centre doesnt recognise it though if I go into Properties/Device Manager it comes up as a HTC Mobile device
Many thanks
You need to flash your original carrier ROM. Go into bootloader, hook up your phone via USB and flash it. Then you should have an updated IPL/SPL of 4.xx.xxxx, after which you can then apply HardSPL and flash another custom ROM if you like.
1. This is NOT a ROM Development thread. I moved it. Please post in the correct sectio next time.
2. It has been covered many times.
3. You flashed using USPL or HardSPL but your SPL is below 4.0 They're both incompatible with your SPL.
4. Your only fix will be a gold card. Search for it and you will find detailed instructions on how to fix it.
Moved?
Where did you move my thread to please?
It was moved here.
ivanmmj said:
It was moved here.
Click to expand...
Click to collapse
LOL, wow.

Categories

Resources