I went to remove a few programs that I don't use anymore and there were no programs to select and the remove button is greyed out. I did a soft reset and a shut down but there are still no items to remove. Has anyoone else had this problem? This happened right after installing Slither Cube, and efrost FTouchFlo.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....Any ideas
saenzjoseph said:
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....Any ideas
Click to expand...
Click to collapse
Exactly the samething happened to me...after installing FTouchFlo and Slither...Like you, I had to hard reset.
Brian
this thing happened to me one time. I had to do a hard reset.
mr.bim said:
I went to remove a few programs that I don't use anymore and there were no programs to select and the remove button is greyed out. I did a soft reset and a shut down but there are still no items to remove. Has anyoone else had this problem? This happened right after installing Slither Cube, and efrost FTouchFlo.
Click to expand...
Click to collapse
Related
Hi I installed a program that did not work with WM5, I subsequently removed it using the Remove Program amplet.
However it still shows on the Program page.
How do I remove it from there?
Don't install non-WM5 compatible apps - it could seriously harm your blood pressure when you find you machine no longer works!
Look here for apps that should work:
http://forum.xda-developers.com/viewtopic.php?t=32698
Thanks for the help?
The program was reported as working on wm5.
The list does answer the question does it
Try a soft reset.
I had to do a hard reset once because I found apps were removed from the Programs list but were not really removed from the device.
Soft reset does not clear it
So will have to 2wait until I completly mess it up and have to do a Hard reset :lol:
Have you tried:
open file explorer
windows - start menu - programs
and deleted the shortcut from there?
this has happened to me when I have removed some apps and it has left the shortcut in programs
Codiac said:
Have you tried:
open file explorer
windows - start menu - programs
and deleted the shortcut from there?
this has happened to me when I have removed some apps and it has left the shortcut in programs
Click to expand...
Click to collapse
New there had to be a simple way!!!
Work ok
Thanks
Hi,
I installed the program DciNobar to "play around" with tweaking my K-Jam. I wanted to bring them back so I tried to uninstall the program from Add/Remove programs and it gave an error and asked me if I wanted to remove it from the list which I selected yes to.
I have since installed SoftKeyAppletEX which has given me the option to reset everything to default or remap the keys manually which I have done yet they still do not show on my screen.
I'm thinking that the DciNobar is still starting up, but don't know where to find the key in the regsitry to remove it.
Does anyone have any suggestions?
Thanks
Ari
Not to worry found the solution. Removed dcinobar from the windows startup directory
Hi everybody I have a huge irritating problem. I have a t-mbile mda and I have the latest rom and radio installed. After a soft reset everything boots up fine then after a few hours the tmail.exe. opens on the screen. I go to start menu settings click on memory and stop the tmail form running and bam it opens on its own again almost immediatley. Ive tried task managers and nothing seems to keep this tmail from opening on the today screen. I know it runs in the process area, but it opens itself after a few hours. Please help.
I cant close this app.
Have you tried checking the notification queues to see if it had itself inside there?
hanmin said:
Have you tried checking the notification queues to see if it had itself inside there?
Click to expand...
Click to collapse
Yes I checked no Tmail.exe listed but this is what is listed:
\\notification\namedevemts\vcpowerwakeupevent
\windows\calupd.exe
\windows\timewizard.exe
calnot.exe..........start on timer
calnot.exe..........start after restore from backup
calnot.exe..........start if time changes
clocknot.exe.......start on timer
clocknot.exe.......start if time changes
clocknot.exe.......start after restore from backup
repllog.exe..........start on timer
repllog.exe..........repllog.exe
repllog.exe..........start if time changes
repllog.exe..........start if RS232 connection has been detected
These are all listed in notification queue via SKtools.
Thanks
Try removing poutlook.lnk from \Windows\Startup
Menneisyys said:
Try removing poutlook.lnk from \Windows\Startup
Click to expand...
Click to collapse
Hey thanks for the help. I tried that too. Didnt work either, after a few hours tmail popped up and would'nt let me close it.
I even did a hard reset and it still popped up and would'nt close.
I installed everything on my storage card but I didnt do a format on the card I just reinserted after the hard reset and created shortcuts from programs that were installed on the card.
I think if this happens again I will format the card and do a hard reset and do a reinstall of everything.
I was just hoping someone out there had the same problem.
damn, my mogul got f*cked up after installing touchflo. Not trying to blame this program but maybe there could be some conflict? After i installed it and didnt really like it, i tried goin to remove program in setting to remove this, but guess what, nothing showed up in there. For some odd reason i cant remove any program from my phone because the screen was blank. Then i tried to install another program and said unsuccessful whenever i tried to install anything. Does this happened to anyone else? any solution
I have the same problem on mine. I will let you know if I can figure out a solution.
LD
http://www.andLinux.org
I had a different problem awhile back after installing Total Commander, any new programs that were added didn't show up in the remove programs menu.
What I had to do is use Activesync to remove them, not sure if it will work in your cases though, but hook up with A.S. and on your PC in A.S. open tools/add remove programs and check/highlight what you want removed.
Good Luck
I am having same problem, please someone help.
REMOVE PROGRAM list is empty after ftouchflo installation and touch cube installation.
ACTIVE SYNC not working either.
please help
There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....
Me too.
I just hard reset. After reading everywhere, this was the only option.
i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.
saenzjoseph said:
There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....
Click to expand...
Click to collapse
i think that was mine,lost everything in my storage memory and couldn't sync up to my desktop after installing the touch flo cube cab.ended up hard resetting and starting over,no cube till someone figures out what caused that.
JAMRZ69 said:
i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.
Click to expand...
Click to collapse
Poorlyduck has a good cube that doesn't cause this issue, its over at PPCGeeks
No need to hard reset
Anyone running into this "Empty Remove Programs" problem in the future, there's no need to hard reset! Check out the simple solution here:
http://www.24hsoftware.com/How-To/this-device-is-restricted-from-downloading-this-file-type.html
found it in this xda thread:
Conclusion: Microsoft Windows Mobile messed up the security settings, so let Microsoft Word Mobile put it back up... problem solved!
Hello my fellow Xperia lovers......and some haters! lol
Simple question....is there a way to remove a program upon a soft reset? I ask this because, i uninstalled the Inhand catolog thing, and when i do a soft reset, it comes up that the program InHandGo.exe could not be found and did not start up....which i don't really care, but i dont want to see that message every time i need to do a soft reset ><. So is there a way to either get rid of that message when soft reset is done, or just some how, fully and cleanly remove that program? I dont really see the point in having it....
andyboo said:
Hello my fellow Xperia lovers......and some haters! lol
Simple question....is there a way to remove a program upon a soft reset? I ask this because, i uninstalled the Inhand catolog thing, and when i do a soft reset, it comes up that the program InHandGo.exe could not be found and did not start up....which i don't really care, but i dont want to see that message every time i need to do a soft reset ><. So is there a way to either get rid of that message when soft reset is done, or just some how, fully and cleanly remove that program? I dont really see the point in having it....
Click to expand...
Click to collapse
The shortcut to InHandGo.exe remains in the startup folder after an uninstall. Just remove this shortcut and you won't get that error message again.
yup just remove that shortcut in \Windows\Startup and you are good to go!
That's also the program I have uninstalled first thing. Useless piece of crap!
How do i get into the \windows\ startup sorry? Im pretty much lost at this point...
EDIT:No wait....sorry....lol i figured it out...
Use the file explorer and go to \my device\windows\startup. It is just so simple!
Interestingly, I'm still experiencing the same behavior after I "uninstalled" that app and yet, when I went and check the Startup directory, there was no entry to In HandUpdater.
The error message I'm getting is "The file 'InHandUpdater' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
What am I doing wrong? Seeing the startup sequence halted because of this makes me want to go back and reinstall the darn thing - just so that I no longer see it.
Please advise. Thanks.
Have you tried installing the application again and then uninstalling. And then you have this program. Cleartemp is the name. It might help with cleaning all stuff left behind.
Same problem here :-(.
There is no shortcut for it in \windows\ startup and the message still comes up whenever I do restart the device!
How to re-install it?
OK, I reinstalled it and the message disappeared ;-)
To install go to "My Device/Program files/Handango Inhand/catalog" and run the file "inhand.cab"